Wolf Classic Cabinetry
This product has a 7 day lead time. Request info @ Estatecabinetry.com
BASE CABINETS
Cabinet fronts are made from 3/4” solid maple wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability. Bottoms are 1/2” solid maple wood.
Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame. Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the hang rail and
cabinet bottom.
All wood 3/4” corner blocks are installed on all corners.Half-depth adjustable shelf of 3/4” plywood with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.
FINISH, DRAWERS & HINGES
All cabinet front and door surfaces receive stain or paint and a catalyzed clear finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids.
All drawers are constructed using 5/8” clear finished solid wood with dovetail construction. Drawer bottom is 1/4” plywood in a dado into drawer sides.
Saginaw: Side mount, standard epoxy glides
Dartmouth & Hudson: Full extension, under mount glides with soft-close
Saginaw: Hidden, six-way adjustable hinge
Dartmouth & Hudson: Hidden, six-way adjustable hinge with installed snap on soft-closing mechanism. All cabinets that require handing are handed left (hinge is on the left when looking at the cabinet). Wall cabinets can simply be flipped over to change hinging. For base cabinets, remove and flip door then screw to other side.
Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides
WALL Cabinets
Cabinet fronts are made from 3/4” solid wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability. Tops are 1/2” solid maple wood.
Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame. Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.
BASE CABINETS
Cabinet fronts are made from 3/4” solid maple wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability. Bottoms are 1/2” solid maple wood.
Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame. Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the hang rail and
cabinet bottom.
All wood 3/4” corner blocks are installed on all corners.Half-depth adjustable shelf of 3/4” plywood with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.
FINISH, DRAWERS & HINGES
All cabinet front and door surfaces receive stain or paint and a catalyzed clear finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids.
All drawers are constructed using 5/8” clear finished solid wood with dovetail construction. Drawer bottom is 1/4” plywood in a dado into drawer sides.
Saginaw: Side mount, standard epoxy glides
Dartmouth & Hudson: Full extension, under mount glides with soft-close
Saginaw: Hidden, six-way adjustable hinge
Dartmouth & Hudson: Hidden, six-way adjustable hinge with installed snap on soft-closing mechanism. All cabinets that require handing are handed left (hinge is on the left when looking at the cabinet). Wall cabinets can simply be flipped over to change hinging. For base cabinets, remove and flip door then screw to other side.
Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides
WALL Cabinets
Cabinet fronts are made from 3/4” solid wood. Front stiles are pocket drilled and assembled with 1-1/4” screws for rugged durability. Tops are 1/2” solid maple wood.
Side panels – 1/2” plywood with matching exterior laminate – glued and stapled in a 1/2” dado in the cabinet’s front frame. Back panels – made from vinyl covered (inside only) 1/2” plywood – are glued and nailed in a 1/2” dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
Adjustable 3/4” plywood shelf with bull nosed, foil covered front edges. The shelves are held in place with self-locking clips on the sides.
Country: United States
