ALWAYS LIKE TO PUT "TALLS" TOGETHER.....MORE DRAMATIC EFFECT AND DOESN'T CUT UP CTR. TOP RUN.....NOTE STACKED CABINETS (WE CALL THEM "DOUBLE-UPPERS").....SEE CLOSE UP AND MORE INFO BELOW.....ALSO ANGLE BASE CAB. AT END OF RUN MAKES ACCESS EASIER AND GIVES MORE ROOM FOR DBL. OVEN.....ALONG WITH...

CLOSE-UP OF "T" SHAPED ISLAND OVERHANG.....COOKTOP CABS. ARE STD. 24" DEPTH.....CAB. THAT MAKES "T" IS 12"d X 33"w.....AS A RESULT, IT OVERHANGS 4.5" ON EACH SIDE TO SUPPORT THE TOP.....ANOTHER GOOD VIEW OF HOW FLOOR, CABS. , TOPS AND BACKSPLASH TILES COORDINATE SO WELL.....ALSO SEE BASE ANGLE...

SEE COOKTOP VENT IN BACK.....HVAC RAN DOWN IN BACK OF CABINET..... BOTH DRAWERS WERE NOTCHED TO FIT AROUND MECHANICALS.

96" CEILING.....USED STANDARD 84" TALLS WITH STD. 12" UPPERS AND NO CROWN.....IF WE USED CROWN, THE TOP CABS. WOULD HAVE TO BE CUT DOWN TO 10" AND THERE WOULD BE ADDL. CHARGES.....ALSO GIVES MORE STORAGE.....GOOD CLOSE-UP OF BEADBOARD DOORSTYLE.

WE CAN'T SAY ENOUGH ABOUT THE COLOR BLENDING SO WE TOOK THIS CLOSE-UP PIC.....ALSO REALLY SHOWS THE BASE ANGLE CAB.

BUFFET FACES ISLAND.....WASN'T ROOM FOR 24"d KITCHEN CABS. SO JUST USED STD. 18"d VANITY CABS.....ALMOST ALL CAB. MFR'S. HAVE A STD. LINE OF VANITY CABS. THAT ARE 18"d & 21"d.....NO CUT-DOWN CHARGES!.....ALSO, ONE OF THE BIGGEST COMPLAINTS FROM OUR CLIENTS IS NOT ENOUGH DRAWERS SO WE ALWAYS MAKE...

ALWAYS USE FUNCTIONAL FULL-HEIGHT DOOR CABS. UNDER COUNTER OVERHANG.....IN THIS CASE WE USED A 12"d x 33"w CABINET WHICH EXTENDS APPROX. 4.5" ON EACH SIDE OF CAB. BEHIND IT.....GIVES SUPPORT FOR "T" SHAPED TOP.

WE NEVER USE SUSANS WITH CENTER POLE.....INSTEAD WE ALWAYS USE "SUPER SUSANS" WHICH DON'T HAVE THE POLE.....GIVES FULL ACCESS.....ALSO, SINCE TOP DISC HAS TO ROTATE ON SHELF, ANYTHNG THAT FALLS OFF JUST LANDS ON SHELF.....IT DOESN'T FALL ALL THE WAY DOWN TO BACK CORNER OF CABINET!

MIXER LIFTS ARE GREAT BECAUSE MIXERS ARE HEAVY.....HANDLE ON SHELF NOT ONLY ADDS CONVENIENCE BUT ACTS AS A "STOP" IN CASE MIXER SLIDES.....USED REV-A-SHELF FOR THE LIFT MECHANISM.....IT FEATURES SOFT CLOSE WHEN LIFT GOES DOWN.....YOU CAN SEE THE PISTON BETWEEN THE "ARMS".

WE NEVER LOAD OUR CLIENTS UP WITH ACCESSORIES BUT ALWAYS MAKE SURE THEY HAVE ROLL-OUT TRAYS IN THEIR PANTRY.....MOST MFRS. PUT 4 ROLL-OUTS IN PANTRY CABINETS.....KEEP IN MIND THAT YOU CAN ALWAYS HAVE MORE SINCE THEY'RE ALL ADJUSTABLE.....THERE ARE 5 IN THIS PANTRY ALL SET AT THE PROPER LEVELS FOR...