Console table, waterfall style with Greek Key base
The “waterfall” style edge console table is a sleek, elegant Modern design that can be custom sized to fit any room or space. Made standard In a 3/4” thick, clear, hand polished Lucite, this stunning piece is made standard at 48” long x 16” wide standing 30” in height.
This piece has the extra added feature of a “Greek key” on the base made of glued 3/4” thick, hand polished Lucite block to add an expensive look to an affordable table.
While pictured in clear, this piece can also be made in a sleek white Lucite or elegant Black . A full scale of color overlays are also available to help add different tones to your table while also protecting the surface.
Table can be made to most sizes up to 65” in length and 24” wide, and can be made in material up to 1” thick. Contact me to figure out which option is best for your needs.
PROS & CONS
PROS-
The 3/4” thick clear Lucite is hand polished to a stunning clarity. Custom sizing is available to make the piece fit any size room. Custom color overlays can be embedded on the piece to get your perfect color scheme while protecting the surface of the table.
It is made to last and the Domestic Acrylic will not loose is clear quality over time
Sides and edges will come fully polished with a beautiful clarity.
Can be made in 1” thick material as well for extra support
CONS -
There is a difference between hand crafted Water fall stye tables and mass produced ones. A mass produced piece has several of the same size being made at once in a large oven. Slabs are placed over a curved form and heated till they fold over the form and cool. This produces a sleek, perfect, gradual curve.
A hand crafted table is done one piece at a time...well by hand. I super heat a single line on the table until it is soft and fold it and clamp it by hand till it cools then form the other side. This creates a tighter edge and will sometimes create an inner fold look. Most edges come out very clean but folding melted Lucite is not a perfect process.
Longer tables may sag in the center under their own weight. For tables longer than 60” a horizontal support brace could be recommended to prevent such sagging. The support braces, while adding strength to the table, do not always glue on clean. You can and will see air pockets in the seams where a support brace is included.
On clear tables you will see glue pockets where the key base is attached to the table, it is nominal but if it will bother you then please consider a non-clear finish for this piece..
This piece has the extra added feature of a “Greek key” on the base made of glued 3/4” thick, hand polished Lucite block to add an expensive look to an affordable table.
While pictured in clear, this piece can also be made in a sleek white Lucite or elegant Black . A full scale of color overlays are also available to help add different tones to your table while also protecting the surface.
Table can be made to most sizes up to 65” in length and 24” wide, and can be made in material up to 1” thick. Contact me to figure out which option is best for your needs.
PROS & CONS
PROS-
The 3/4” thick clear Lucite is hand polished to a stunning clarity. Custom sizing is available to make the piece fit any size room. Custom color overlays can be embedded on the piece to get your perfect color scheme while protecting the surface of the table.
It is made to last and the Domestic Acrylic will not loose is clear quality over time
Sides and edges will come fully polished with a beautiful clarity.
Can be made in 1” thick material as well for extra support
CONS -
There is a difference between hand crafted Water fall stye tables and mass produced ones. A mass produced piece has several of the same size being made at once in a large oven. Slabs are placed over a curved form and heated till they fold over the form and cool. This produces a sleek, perfect, gradual curve.
A hand crafted table is done one piece at a time...well by hand. I super heat a single line on the table until it is soft and fold it and clamp it by hand till it cools then form the other side. This creates a tighter edge and will sometimes create an inner fold look. Most edges come out very clean but folding melted Lucite is not a perfect process.
Longer tables may sag in the center under their own weight. For tables longer than 60” a horizontal support brace could be recommended to prevent such sagging. The support braces, while adding strength to the table, do not always glue on clean. You can and will see air pockets in the seams where a support brace is included.
On clear tables you will see glue pockets where the key base is attached to the table, it is nominal but if it will bother you then please consider a non-clear finish for this piece..
