Waterfall style Lucite console tables and coffee tables
Our Waterfall style, Lucite tables are made in thickness up to 1" . All of our tables are made to order so custom sizing is never a problem. Priced mainly by depth, the consoles can be made as thin as 6" and as wide as 34". made from a single sheet of Lucite, the 120" length of our material does limit us to certain length + height restrictions. A standard 30" high table can be a maximum length of 60", if you want to go taller you need to go shorter.
Tables can be make with shelves, brackets to mount to a wall, as well as support brackets to prevent sagging (recommended in lengths greater then 50").
PROS & CONS
PROS-
The 3/4” thick clear Lucite is hand polished to a stunning clarity. Custom sizing is available to make the piece fit any size room. Custom color overlays can be embedded on the piece to get your perfect color scheme while protecting the surface of the table.
It is made to last and the Domestic Acrylic will not loose is clear quality over time
Sides and edges will come fully polished with a beautiful clarity.
Can be made in 1” thick material as well for extra support
CONS -
There is a difference between hand crafted Water fall stye tables and mass produced ones. A mass produced piece has several of the same size being made at once in a large oven. Slabs are placed over a curved form and heated till they fold over the form and cool. This produces a sleek, perfect, gradual curve.
A hand crafted table is done one piece at a time...well by hand. I super heat a single line on the table until it is soft and fold it and clamp it by hand till it cools then form the other side. This creates a tighter edge and will sometimes create an inner fold look. Most edges come out very clean but folding melted Lucite is not a perfect process.
Longer tables may sag in the center under their own weight. For tables longer than 60” a horizontal support brace could be recommended to prevent such sagging. The support braces, while adding strength to the table, do not always glue on clean. You can and will see air pockets in the seams where a support brace is included.
Tables can be make with shelves, brackets to mount to a wall, as well as support brackets to prevent sagging (recommended in lengths greater then 50").
PROS & CONS
PROS-
The 3/4” thick clear Lucite is hand polished to a stunning clarity. Custom sizing is available to make the piece fit any size room. Custom color overlays can be embedded on the piece to get your perfect color scheme while protecting the surface of the table.
It is made to last and the Domestic Acrylic will not loose is clear quality over time
Sides and edges will come fully polished with a beautiful clarity.
Can be made in 1” thick material as well for extra support
CONS -
There is a difference between hand crafted Water fall stye tables and mass produced ones. A mass produced piece has several of the same size being made at once in a large oven. Slabs are placed over a curved form and heated till they fold over the form and cool. This produces a sleek, perfect, gradual curve.
A hand crafted table is done one piece at a time...well by hand. I super heat a single line on the table until it is soft and fold it and clamp it by hand till it cools then form the other side. This creates a tighter edge and will sometimes create an inner fold look. Most edges come out very clean but folding melted Lucite is not a perfect process.
Longer tables may sag in the center under their own weight. For tables longer than 60” a horizontal support brace could be recommended to prevent such sagging. The support braces, while adding strength to the table, do not always glue on clean. You can and will see air pockets in the seams where a support brace is included.
