In this project, we built 17 radiator boxes total, all the same basic design. The frames were oak with milled MDF tops and milled oak edging around the tops. Insulative / reflective material was fastened on the inside to prevent the boxes from becoming so hot with the steam radiators that one...

In this project, we built 17 radiator boxes total, all the same basic design. The frames were oak with milled MDF tops and milled oak edging around the tops. Insulative / reflective material was fastened on the inside to prevent the boxes from becoming so hot with the steam radiators that one...

Look closely at this room, this box has a trick to it. The house is solid concrete and this little bump-out has no lathe strips behind the plaster. Because of this, there is no way to run wires through the walls without "trenching" into the plaster.