Largo Green Inc

Home Improvement Professionals , General Contractors , Accessory Dwelling Units , Home Remodeling , Home Additions , Basement Remodeling
79 Reviews
Review me
Largo Green Inc
79 Reviews

Garage Storage Rack Install

Client procured SafeRacks overhead storage racks from CostCo and needed installers with the correct tools and knowhow. Largo Green Inc. (LG) was retained and responded within 2 days on a Saturday morning to deliver results. 2 man team from LG accomplished the install in 3 hours. LG's signature measurements, leveling, and squared corners is evident. Client awarded LG more projects as result.
Project Year: 2018
Project Cost: Less than $1,000
Country: United States
LG first assembled one rack to determine any missing components or questions
Garage Storage Rack Install
LG collaborated with client to optimize the positioning of the 2 racks in a L-shaped configuration. Fortunately the rack fit near perfectly in the space available above the garage side door, and along the back and side walls.
Garage Storage Rack Install
Back wall garage had ample space up, and LG set about to locate the studs above. Once found and marked, LG went to work mapping out the beginning storage spine.
Garage Storage Rack Install
Locating and marking studs for the load to come.
Garage Storage Rack Install
Always along the wall is sturdy and reliable stud.
Garage Storage Rack Install
The best tools are the ones that make our job efficient and professional.
Garage Storage Rack Install
Screwing deep into the studs will ensure the rack's load will be safe above the garage traffic areas below.
Garage Storage Rack Install
Pre-assembling the bolts, nuts, and washers made the construction move along with growing momentum.
Garage Storage Rack Install
The studs were marked, and the rack's corner's marked.
Garage Storage Rack Install
2 intersecting lines make a corner joint.
Garage Storage Rack Install
More long screws to anchor that rail.
Garage Storage Rack Install
Nuts, bolts, and washers ready for installation.
Garage Storage Rack Install
90 degrees and along that back wall. That stud was exactly what LG needed.
Garage Storage Rack Install
Back to the original exterior wall and time to attach the drop down tracks.
Garage Storage Rack Install
Snapping the rails together was a cinch. They had to be aligned correctly with certain edges up, not down.
Garage Storage Rack Install
LG's gloves allowed us a cushion surface to tap the corners tightly into place for a maximum locked rack.
Garage Storage Rack Install
Shelving in pl;ace, clips then hung for under storage.
Garage Storage Rack Install
More options for hanging tools, bikes, and miss. items
Garage Storage Rack Install
Time to add the second rack's beginning tracks. LG always level;ing and tying back to base design.
Garage Storage Rack Install
Attaching to same top rack added stability, strength, and continuity.
Garage Storage Rack Install
Middle stud was for both the length of 2nd rack and extra support, if needed for first rack.
Garage Storage Rack Install
Skeleton in place for 2nd rack.
Garage Storage Rack Install
It all looks like one structure. Its perfectly square.
Garage Storage Rack Install
Adding those under clips.
Garage Storage Rack Install
Corners were strengthened by using the manufacturer's black bolts.
Garage Storage Rack Install
Garage Storage Rack Install
Corners were strengthened by using the manufacturer's black bolts.
Garage Storage Rack Install
Racks and clips in place
Garage Storage Rack Install
Double-checking the level and square. Tap here and there so all corners are 90 degrees and tight.
Garage Storage Rack Install
Double-checking the level and square. Tap here and there so all corners are 90 degrees and tight.
Garage Storage Rack Install