This custom version from the Lodge series ( https://www.postandbeam.com/plans/houses/?jsf=jet-engine:listing&_s=lodge) with the standard Beamed Exterior Wall System was designed to be built in rural eastern New Hampshire. The main level is about 1550 sq. ft. with the front entry and right-side primary bedroom suite under a flat ceiling/Plaster and Beam Mid-Floor System. The left side is the kitchen and dining room under a flat ceiling/Plaster and Accent Beam Roof system, and a mudroom connector with laundry and bath conventionally framed. To the rear is the living room under a cathedral Liner Roof System. Upstairs is about 750 sq. ft. with two additional bedrooms on the right, and a left-side full bath adjacent to the loft sitting area that looks down onto the living area below. The full basement is currently designed for storage and utilities. The garage is conventional by owner/contractor. Framing system specifications: https://www.postandbeam.com/package/specifications/