QUALITY IS 100% UNDER CONTROL. We picked the most premium carbon steel to make the hardware heavy-duty and sturdier than the competition. The black powdered coating makes the paint stays forever and will not be scratched off. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track. Each complete track can hold door weight up to 200 lbs.

FULLY OPTIMIZED CONNECTING AND SPACING. I understand how frustrated it was when you opened the box and found out multiple smaller tracks that were hard to line up and connect. Even worse when the spacing was not exactly 16 inches. We��_ve got them all figured out! The spacing is now exactly 16 inches. Track 8FT and under is only one piece track. Track 10FT and above is connected by two tracks using a junction plate(track connector), thus, the spacing between the middle two holes may not be 16 inches.

BARN DOOR HARDWARE INSTALLATION MADE EASY. You hate to see vague installation manual that is just one piece of paper with hard to read measurements, badly drawing pictures and barely any word instructions? So am I! Fortunately, in our installation manual, you will see the step by step instructions with USA standard fractional inch measurements, self-explanatory pictures, and concise word instructions. You are going to have a pleasant time while installing a sliding door at your home.

MONEY AND TIME SAVER FOR YOUR PROJECT. Tired of spending a lot of money and time when searching for the proper size and type of hardware at the big box store? Not the case here! We provide track sizes from 5FT to 20FT with reasonable price. We also improved our packaging to make sure you will get everything you need in a timely manner! No more hassle to go back and forth for the missing or replacement parts.

Pre-install Notice:

• Only the hardware is for sale, doors are not included.
• If you are installing the hardware on a concrete wall, please send us a message asking for bolts specifically for concrete walls. The hardware package only has lag bolts for wooden wall or drywall.
• Our sliding barn door hardware kit is compatible with door thickness from 1 3/8 inches to 1 3/4 inches. If you have thinner or thicker door, please contact us for the correct length of the hex bolts of the hangers or you can get them from your local hardware store. Please also notify us to put spacer extensions in the package if you have thicker doors. The spacer extension will extend the track further from the wall to fit the thicker door.
• If you have a door trim, you��_d better put a header board that is as thick as the trim and then attach the hardware to the header board.
• From the top of the door to the ceiling, you need to have at least 12 Inches clearance for the Z shape bracket bypass hardware.
• All tracks that are 8FT and under come in one piece. All tracks that are 10FT and above are connected by two tracks using a junction plate. Thus, the spacing between the middle two holes may not be 16 inches.