- Product Description
- Product Specifications
- Shipping and Returns
- Color: White
- Size: 5.5 ounce
- Easy clean
- Repels water, dirt and stains
- Stain proof protection
- Lifetime mold and mildew resistance guarantee
- Sealant stays looking clean, fresh and new
- 100% waterproof
- Crack proof
- Safe for granite and marble
- Water ready in 4 hours
- Easy water cleanup and low odor
- Interior.
Suggested Uses:
Ideal for sealing:
- Tubs
- Sinks
- Backsplashes
- Showers
- Countertops
- Toilets
- Fixtures
- Loose Tile Repair
- Cracks and Joints.
Adheres To:
- Ceramic/Porcelain
- Glass
- Most Plastics
- Granite, Cultured Marble and Natural Stone
- Wood
- Metal
- Drywall
- Fiberglass
- Painted Surfaces
Performance Characteristics:
- Repels water, stains and dirt
- Lifetime mold and mildew resistance guarantee
- Stain proof protection
- Water ready in 4 hours
- 100% waterproof and crack proof
- Safe for granite and marble
- Easy water cleanup and low odor
- Not paintable
- Sealant applies white and dries clear in 7-14 days (depending on joint depth, temperature and humidity).
For Best Results:
- Apply in temperatures above 40°F.
- Not for continuous underwater use, high temperature surfaces or surface defects.
- Joint size should not exceed 3/8” wide by 3/8” deep. For joints deeper than 3/8”, use backer rod.
- Store product away from extreme heat or cold.
Surface Preparation and Application:
- Surface must be clean, dry and free of all old sealant, dirt, dust, debris and grease. Rubbing alcohol is recommended for removing soap film and soil.
- Remove cap (from tube). Cut nozzle at a 45° angle to desired bead size. If using the cartridge, puncture inner foil seal and load into caulk gun.
- Fill gap with sealant, pushing sealant ahead of nozzle.
- For a neat finish, smooth bead of sealant immediately with a finishing tool.
- Allow sealant to dry for at least 4 hours before exposing to water. Sealant reaches full performance in 24 hours.
- Clean up excess uncured sealant with damp sponge before it skins over. Scrape or cut away excess cured sealant.
- Regular cleaning of surrounding areas is suggested.
- Reseal tube/cartridge for future use.
Physical and Chemical Characteristics:
- Tooling Time: 3-5 minutes
- Tack Free Time: 8-10 minutes
- Paintable: No
- Odor: Very Mild
- Consistency: Smooth and Creamy
- Vehicle: Acrylic Polymer
- Volatile: Water
- Flash Point: None
- Filler: Titanium Oxide
- Density: 1.03
- Solids: 58% by weight
- Weight per Gallon: 8.60 lbs/gallon
- Temperature Service Range: 0° F to 170°F
- Temperature Application Range: 40ºF to 100ºF
- Freeze Thaw Stability: Passes 5 Cycles
- Applications: Interior
- Shelf Life: 12 Months
- Coverage: 5.5 fluid ounces: 30 linear feet at a 3/16" diameter bead or two average size bathtubs.
Clean Up and Storage:
*Remove excess uncured sealant with a damp cloth/sponge before it dries. After sealant has dried, excess sealant must be cut or scraped away. Store in a cool, dry place away from extreme heat or cold.- Color: White
- Size: 5.5 ounce
- Easy clean
- Repels water, dirt and stains
- Stain proof protection
- Lifetime mold and mildew resistance guarantee
- Sealant stays looking clean, fresh and new
- 100% waterproof
- Crack proof
- Safe for granite and marble
- Water ready in 4 hours
- Easy water cleanup and low odor
- Interior.
Suggested Uses:
Ideal for sealing:
- Tubs
- Sinks
- Backsplashes
- Showers
- Countertops
- Toilets
- Fixtures
- Loose Tile Repair
- Cracks and Joints.
Adheres To:
- Ceramic/Porcelain
- Glass
- Most Plastics
- Granite, Cultured Marble and Natural Stone
- Wood
- Metal
- Drywall
- Fiberglass
- Painted Surfaces
Performance Characteristics:
- Repels water, stains and dirt
- Lifetime mold and mildew resistance guarantee
- Stain proof protection
- Water ready in 4 hours
- 100% waterproof and crack proof
- Safe for granite and marble
- Easy water cleanup and low odor
- Not paintable
- Sealant applies white and dries clear in 7-14 days (depending on joint depth, temperature and humidity).
For Best Results:
- Apply in temperatures above 40°F.
- Not for continuous underwater use, high temperature surfaces or surface defects.
- Joint size should not exceed 3/8” wide by 3/8” deep. For joints deeper than 3/8”, use backer rod.
- Store product away from extreme heat or cold.
Surface Preparation and Application:
- Surface must be clean, dry and free of all old sealant, dirt, dust, debris and grease. Rubbing alcohol is recommended for removing soap film and soil.
- Remove cap (from tube). Cut nozzle at a 45° angle to desired bead size. If using the cartridge, puncture inner foil seal and load into caulk gun.
- Fill gap with sealant, pushing sealant ahead of nozzle.
- For a neat finish, smooth bead of sealant immediately with a finishing tool.
- Allow sealant to dry for at least 4 hours before exposing to water. Sealant reaches full performance in 24 hours.
- Clean up excess uncured sealant with damp sponge before it skins over. Scrape or cut away excess cured sealant.
- Regular cleaning of surrounding areas is suggested.
- Reseal tube/cartridge for future use.
Physical and Chemical Characteristics:
- Tooling Time: 3-5 minutes
- Tack Free Time: 8-10 minutes
- Paintable: No
- Odor: Very Mild
- Consistency: Smooth and Creamy
- Vehicle: Acrylic Polymer
- Volatile: Water
- Flash Point: None
- Filler: Titanium Oxide
- Density: 1.03
- Solids: 58% by weight
- Weight per Gallon: 8.60 lbs/gallon
- Temperature Service Range: 0° F to 170°F
- Temperature Application Range: 40ºF to 100ºF
- Freeze Thaw Stability: Passes 5 Cycles
- Applications: Interior
- Shelf Life: 12 Months
- Coverage: 5.5 fluid ounces: 30 linear feet at a 3/16" diameter bead or two average size bathtubs.
Clean Up and Storage:
*Remove excess uncured sealant with a damp cloth/sponge before it dries. After sealant has dried, excess sealant must be cut or scraped away. Store in a cool, dry place away from extreme heat or cold.- Product ID
- 154734938
- Manufactured By
- Dap Inc.
- Sold By
- Toolbox Supply
- Size/Weight
- W 6" / D 2" / H 10" / 9.6 oz.
- Color
- White
- Assembly Required
- No
- Category
- Stains And Varnishes
Sold by Toolbox SupplyTop Seller- Free shipping!
Ready to ship to the contiguous U.S. in 3-4 days
This product does not ship to Canada
Note: Free shipping is not available to AK, HI, PR or Canada. Some exclusions apply.
Houzz offers a 30-day standard return policy for most items. We also accept returns on damaged large or oversized items that ship via freight, as long as you report the damage within 5 days of delivery. View our full Return Policy.
- Product Description
- Product Specifications
- Shipping and Returns
- Color: White
- Size: 5.5 ounce
- Easy clean
- Repels water, dirt and stains
- Stain proof protection
- Lifetime mold and mildew resistance guarantee
- Sealant stays looking clean, fresh and new
- 100% waterproof
- Crack proof
- Safe for granite and marble
- Water ready in 4 hours
- Easy water cleanup and low odor
- Interior.
Suggested Uses:
Ideal for sealing:
- Tubs
- Sinks
- Backsplashes
- Showers
- Countertops
- Toilets
- Fixtures
- Loose Tile Repair
- Cracks and Joints.
Adheres To:
- Ceramic/Porcelain
- Glass
- Most Plastics
- Granite, Cultured Marble and Natural Stone
- Wood
- Metal
- Drywall
- Fiberglass
- Painted Surfaces
Performance Characteristics:
- Repels water, stains and dirt
- Lifetime mold and mildew resistance guarantee
- Stain proof protection
- Water ready in 4 hours
- 100% waterproof and crack proof
- Safe for granite and marble
- Easy water cleanup and low odor
- Not paintable
- Sealant applies white and dries clear in 7-14 days (depending on joint depth, temperature and humidity).
For Best Results:
- Apply in temperatures above 40°F.
- Not for continuous underwater use, high temperature surfaces or surface defects.
- Joint size should not exceed 3/8” wide by 3/8” deep. For joints deeper than 3/8”, use backer rod.
- Store product away from extreme heat or cold.
Surface Preparation and Application:
- Surface must be clean, dry and free of all old sealant, dirt, dust, debris and grease. Rubbing alcohol is recommended for removing soap film and soil.
- Remove cap (from tube). Cut nozzle at a 45° angle to desired bead size. If using the cartridge, puncture inner foil seal and load into caulk gun.
- Fill gap with sealant, pushing sealant ahead of nozzle.
- For a neat finish, smooth bead of sealant immediately with a finishing tool.
- Allow sealant to dry for at least 4 hours before exposing to water. Sealant reaches full performance in 24 hours.
- Clean up excess uncured sealant with damp sponge before it skins over. Scrape or cut away excess cured sealant.
- Regular cleaning of surrounding areas is suggested.
- Reseal tube/cartridge for future use.
Physical and Chemical Characteristics:
- Tooling Time: 3-5 minutes
- Tack Free Time: 8-10 minutes
- Paintable: No
- Odor: Very Mild
- Consistency: Smooth and Creamy
- Vehicle: Acrylic Polymer
- Volatile: Water
- Flash Point: None
- Filler: Titanium Oxide
- Density: 1.03
- Solids: 58% by weight
- Weight per Gallon: 8.60 lbs/gallon
- Temperature Service Range: 0° F to 170°F
- Temperature Application Range: 40ºF to 100ºF
- Freeze Thaw Stability: Passes 5 Cycles
- Applications: Interior
- Shelf Life: 12 Months
- Coverage: 5.5 fluid ounces: 30 linear feet at a 3/16" diameter bead or two average size bathtubs.
Clean Up and Storage:
*Remove excess uncured sealant with a damp cloth/sponge before it dries. After sealant has dried, excess sealant must be cut or scraped away. Store in a cool, dry place away from extreme heat or cold.