FREE shipping on orders over $49!* Details
- All Products
- Bath
- Tile
- Mosaic Tile
- Length: Less Than 1 Inch
Under 1 Inch Long Rectangular Mosaic Tile
Item 1 of 17
Sort by:
Price
914 Results
Newport Beach Stack 11.75 x 12by Pearl Drop Ineriors Design(1)
$24.49/sq ft.
Free Shipping
- Beach Stack Newport Beach Stack 11.75 X 12 Luxury Mosaic
- 0.98 SqFt Each
- 22 Pieces Per Box
- 21.56 SqFt Per Box
- Product Sold By The Piece
- Newport Beach Stack 11.75x12 - Stained Glass Mosaic tile. Pool rated mosaic in Stack/Linear shape.
- Suggested Grout Color: Bostik Trucolor White H152
- Type: mosaic
- Size: 11.75" x 12"
- Pc/sf/box: 22pc / 21.56sf
- Size: 11.75" x 12" sqft/pc: 0.98sqft Width: 11.75 Depth: 12
B03S Walls Tiles Mother of Pearl Shell Tile Mosaic I-Shaped Rectangle Home Decorby CHOIS(6)
$20
Free Shipping
- Note: If you have any concerns that these tiles will not be suitable for your particular application,please buy a sample first to make sure.
- This will also show you the high quality of our product.please purchase one sheet as a sample to make sure.
- Size : 11" x 11.5" (each shell size: 0.787" x 0.394")
- Color : Mother of pearl pearlescent
- Package Inclused : 1 piece of tile
- Material : Freshwater shell,mother of pearl.100% eco-friendly material, water & fire proof
- Applications : Shell mosaic tile are used widely in different places.
- Ideal tiles for indoor and outdoor walls tile.
- Building exteriors,swimming pools,kitchen room,bathroom(don't need worry the soap water).
- Hotels,bars,ballroom,villa.
- Table top,ceiling.saloons.
Prestige Pearl Calacatta 7.25 x 11.75by Fancy Decorative Mosaic
$70
Free Shipping
Sponsored- Prestige Pearl Calacatta 7.25 x 11.75 "- Waterjet mosaic, calacatta gold marble with white pearl in artistic, wave pattern.
- Glass tile thin-set required.
- Suggested Grout Color: Bostik Dimension Diamond H600
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla 3.5"x0.5" Mini KitKat Matte Whiteby The Mosaic Factory(42)
$14.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Matte
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Greenby The Mosaic Factory(36)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Green with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Chevron Royal Sapphire 12 x 12by Fancy Decorative Mosaic(1)
$46
Free Shipping
Sponsored- Chevron Royal Blue 12 x 12
- Suggested Grout Color: Bostik Trucolor White H152
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla 6"x1" Maxi KitKat Matte Whiteby The Mosaic Factory(8)
$16.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Finish: Matte
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.96 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Glazed Porcelain Mosaic Sheet Sevilla 3.5"x0.5" Mini KitKat Glossy Light Greenby The Mosaic Factory(40)
$19.93/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Light Green
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Slot Calacatta 11.75 x 11.75by Fancy Decorative Mosaic
$36
Free Shipping
Slot Calacatta 11.75x11.75 - Calacatta Gold and Thassos marble blended into a stacked linear pattern. Marble arrangements are not in any particular pattern.
Suggested Grout Color: Bostik Trucolor White H152
Suggested Grout Color: Bostik Trucolor White H152
Hulu Blue Band 11 x 11.5by Fancy Decorative Mosaic
$23
Free Shipping
- Hulu Blue Band 11 x 11.5 - Stacked linear mosaic made of blue porcelain.
- Suggested Grout Color: Bostik Trucolor White H152
Carrara White Diagonal Basket Weave Stanza Marble Mosaic Tile Honed, 1 sheetby Stone Center Online(149)
$18/sq ft.
Free Shipping
- Carrara White Marble 0.4"x1.7" rectangular pieces and Nero Marquina Black Marble 0.4"x0.4" square dots mounted on 11.8x11.8" sturdy mesh tile sheet
- 216 stones on each sheet; 5/16" thickness; Honed (Matte) finish
- First Quality; Natural Beauty; Carefully Selected; Consistent in size and finish; Factory Direct
- Matching field tiles, subway tiles, herringbone, hexagon tiles, borders, moldings and more
- Price per sheet (0.9 sq.ft.); FREE SHIPPING; Large quantities in stock - info@stonecenteronline
White Glossy Herringbone Porcelain Mosaic, 15 Sheetsby Buytilesandmore
$11.59/sq ft.
Free Shipping
Retro Herringbone Bianco porcelain tile offers a soft, neutral look that complements nearly any design scheme. It?s classic yet on-trend pattern and glossy finish create visual interest without overpowering its a perfect choice for updating kitchens and baths. A welcomed addition to both homes and light use commercial spaces, use it as wall tile, bathroom or kitchen backsplash tile, or on floors or countertops. Mix and match White Glossy Herringbone tile with other tiles from s Domino Collection for easy to achieve designer looks. These tiles are mounted on mesh-backed sheets for simplified installation and a professional finish. For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Rustic Gold Panel 6X24, Gauged, Slate, Ledgersby Pearl Drop Design
$21.10/sq ft.
Free Shipping
Sponsored- Title: Rustic Gold Panel 6X24, Gauged, Slate, Ledgers
- Size: 6x24, SQFT per piece: 1, Height: 1, Length: 6, Width: 24
- Sku: NewMSPearl Drop_125
- Material: SLATE
- Category: LEDGERS
Mosaic Home Decoration Walls Tiles Mother of Pearl Shell Backsplash Tile Stickerby CHOIS(2)
$35
Free Shipping
- Note: If you have any concerns that these tiles will not be suitable for your particular application,please buy a sample first to make sure.
- This will also show you the high quality of our product.please purchase one sheet as s sample to make sure.
- One sheet size : about 12" x 12" .
- Color : Mother of pearl pearlescent
- Package Inclused : 1 piece of tile
- Material : Freshwater shell,mother of pearl.100% eco-friendly material, water & fire proof
- Applications : Shell mosaic tile are used widely in different places.
- Ideal tiles for indoor and outdoor walls tile.
- Building exteriors,swimming pools,kitchen room,bathroom(don't need worry the soap water).
- Hotels,bars,ballroom,villa.
- Table top,ceiling.saloons.
Geometro Tulle Coastal Recycled Glass Mosaics, 7 Sheetsby Buytilesandmore
$30.24/sq ft.
Free Shipping
Geometro is crated entirely from recycled glass that is ground to fine powder and molded under extreme pressure and heat. colored with inert natural minerals and enamel, it is a full body product immune from fading or discoloration, showing equal color through and through. Tested for hardness and scoring a Mohs hardness rating of 5.5, excellent resistance to UV, common household chemicals, foot traffic, stains, and frost while delivering a slip resistance of R9, it is an excellent choice for both vertical and horizontal surfaces, both indoors and outdoors as well as fully submerged pools and spas. For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Geometro Belfort Country Recycled Glass Mosaics, 7 Sheetsby Buytilesandmore
$28.57/sq ft.
Free Shipping
Geometro is crated entirely from recycled glass that is ground to fine powder and molded under extreme pressure and heat. colored with inert natural minerals and enamel, it is a full body product immune from fading or discoloration, showing equal color through and through. Tested for hardness and scoring a Mohs hardness rating of 5.5, excellent resistance to UV, common household chemicals, foot traffic, stains, and frost while delivering a slip resistance of R9, it is an excellent choice for both vertical and horizontal surfaces, both indoors and outdoors as well as fully submerged pools and spas. For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Marble Mosaic Border Listello Accent Tile Classic Nero 3x7.9 Polished, 1 pieceby Stone Center Online(2)
$118.75/sq ft.
Free Shipping
- Color: Mongolia Black, White Jade ;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- Classic Nero 3x7.9 Marble Mosaic Border Listello Tile Polished
Almond Glossy Herringbone Porcelain Mosaic, 15 Sheetsby Buytilesandmore(2)
$15.67/sq ft.
Free Shipping
lmond Glossy Herringbone porcelain tile features a warm-toned neutral cream color that complements almost any design scheme. Its classic yet on-trend pattern and glossy finish create visual interest without overpowering perfect for updating kitchens and baths. A welcomed addition to both homes and light use commercial spaces, use it as wall tile, bathroom or kitchen backsplash tile, or on floors or countertops. Mix and match Almond Glossy Herringbone tile with other tiles from s Domino Collection for easy to achieve designer looks. These tiles are mounted on mesh-backed sheets for simplified installation and a professional finish.For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Metro Brick Herringbone Matte Black Porcelain Floor and Wall Tileby Merola Tile(3)
$16.48/sq ft.
Our Metro Brick Herringbone Matte Black Porcelain Floor and Wall Mosaic Tile instantly elevates spaces through a refreshing dose of timeless design. As an innovative twist on the classic mosaic, this floor and wall product is comprised of subway shaped chips in black with a smooth surface. Matte rectangles are arranged in a herringbone pattern on an interlocking mesh to create a unique and seamless installation. This minimalistic geometric porcelain mosaic is unique yet simplistic enough to integrate into any design, ranging from traditional style renovations to modern home projects. Its impervious and frost-resistant features make this an ideal tile for both indoor and outdoor residential use, including backsplashes, bathrooms, showers, kitchens and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Metro Brick Collection. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 9.4 square feet, 10 pieces per case. Case weight is 22.34 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.63 in. width x 12.5 in. length x 0.22 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a low sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- Please note: Samples are not returnable
- Country of Origin: Thailand
Icy Ocean Stack 11.75 x 12by Pearl Drop Ineriors Design(2)
$26.53/sq ft.
Free Shipping
Sponsored- Icy Ocean Stack- Icy Ocean Stack 11.75 X 12 Modern Mosaic
- 0.98 SqFt Each
- 10 Pieces Per Box
- 9.79 SqFt Per Box
- Product Sold By The Piece
- Icy Ocean Stack- light blue and blue crackle glass in linear and offset layout.
- Suggested Grout Color: Bostik Dimension Diamond H600
- Type: mosaic
- Size: 11.75" x 12"
- Pc/sf/box: 10pc / 9.79sf
- Size: 11.75" x 12" sqft/pc: 0.98sqft Width: 11.75 Depth: 12
Mosaic Glass Tile Surface Waves, Sapphireby Flooring Supply Shop(2)
$78
Free Shipping
MOSAIC GLASS TILE SURFACE WAVES - SAPPHIRE
Pool Rated for use in Swimming Pools
Price per Sheet
Water Jet Mosaic Sapphire glass in water wave shape.
Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Recommended Thin-Set: MAPEI Adesilex-P10 Premium Glass Tile Mortar mixed with MAPEI Keraply Latex Mortar Additive
Suggested Grout: MAPEI Ultracolor Plus FA, MAPEI FlexColor CQ or BOSTIK Trucolor Rapidcure
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
MAINTENANCE & CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Pool Rated for use in Swimming Pools
Price per Sheet
Water Jet Mosaic Sapphire glass in water wave shape.
- Material: Glass
- Piece Size: 11 1/2" x 12 1/2"
- Sq Ft Per Piece: 1
- Colors: Sapphire
- Finish: Glossy
- Brighten up your pool or shower with this series
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Shower Walls, Shower Floors, Pools, Pool Liners, Interior Dry Walls, Interior Floors, Exterior Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Recommended Thin-Set: MAPEI Adesilex-P10 Premium Glass Tile Mortar mixed with MAPEI Keraply Latex Mortar Additive
Suggested Grout: MAPEI Ultracolor Plus FA, MAPEI FlexColor CQ or BOSTIK Trucolor Rapidcure
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
MAINTENANCE & CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Calacatta Maserati 1X3 Marble Herringbone Mosaic, Honed, 10 sq.ft.by Fancy Design Group(2)
$23.80/sq ft.
Free Shipping
Calacatta Gold 1x3 Marble Herringbone Mosaic Tile, Honed, Marble from Italy
Design Type:
- Design Type: Honed Finish
Design:
- Color: Calacatta Gold
- Material Type:Marble
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.38
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_1124
- Product Code: Fancy_group_1124
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_4572
Magic Pattern Mosaic Blend Tile, Stainless Steel, Multi-Color, 10 Sq. ft.by www.wallandtile.com(2)
$468
Free Shipping
Stainless Steel Magic Pattern Mosaic 12x12 Blend
The unique magic pattern results in a stunning modern effect .This tile is ideal for steel back splashes, accent walls, fireplaces and more. The tiles in this sheet are mounted on a nylon mesh which allows
The unique magic pattern results in a stunning modern effect .This tile is ideal for steel back splashes, accent walls, fireplaces and more. The tiles in this sheet are mounted on a nylon mesh which allows
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Grayby The Mosaic Factory
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Gray with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Basalt Mosaic, 1 X 3 Honedby Fancy Design Group
$25.80/sq ft.
Free Shipping
- 1x3 Honed Basalt Mosaic Tile
- Design Type: Gray
- Type: Honed Finish
Design:
Color:
Material Type:
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.375
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_682
- Product Code: Fancy_group_682
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_4130
Glazed Porcelain Mosaic Sheet Sevilla 3.5"x0.5" Mini KitKat Glossy Blue Grayby The Mosaic Factory
$19.93/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Blue Gray
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Casale White Shining 11.75 x 11.75by Pearl Drop Ineriors Design
$20.83/sq ft.
Free Shipping
Sponsored- Polished White Glass Casale White Shining 11.75 X 11.75 Mosaic
- 0.96 SqFt Each
- 10 Pieces Per Box
- 9.60 SqFt Per Box
- Product Sold By The Piece
- Polished white glass in subway layout -chip sizes are 2x12, 2x8, 2x6, 2x4.
- Suggested Grout Color: Bostik Dimension Diamond H600
- Type: mosaic
- Size: 11.75" x 11.75"
- Pc/sf/box: 10pc / 9.6sf
- Size: 11.75" x 11.75" sqft/pc: 0.96sqft Width: 11.75 Depth: 11.75
Glazed Porcelain Mosaic Tile Sheet Sevilla 3.5"x0.5" KitKat Finger Glossy Whiteby The Mosaic Factory
$14.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Glazed Porcelain Mosaic Tile Sheet Sevilla 3.5"x0.5" Mini KitKat Matte Blackby The Mosaic Factory
$14.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Black
- Material: Porcelain
- Surface: Matte
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Glazed Porcelain Mosaic Tile Sheet Sevilla 6"x1" Maxi KitKat Glossy Whiteby The Mosaic Factory
$16.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Finish: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.96 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 1 - Wall Use Only Size Options
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Grey Small Chevron Mosaic Tileby Faber Cnk Stone
$16
Free Shipping
carefully selected and hand-sorted according to color, size and shape in order to ensure the highest quality pebble tile available. The stones are attached to a sturdy mesh backing using non-toxic, environmentally safe glue. Because of the unique pattern in which our tile is created they fit together seamlessly when installed so you can't tell where one tile ends and the next begins!
Carrara White Diagonal Basket Weave Gray dots Marble Mosaic Polished, 1 sheetby Stone Center Online
$21/sq ft.
Free Shipping
- Carrara White Marble 0.4"x1.7" rectangular pieces and Bardiglio Dark Gray Marble 0.4"x0.4" square dots mounted on 11.8x11.8" sturdy mesh tile sheet
- 216 stones on each sheet; 5/16" thickness; Polished (Glossy) finish
- First Quality; Natural Beauty; Carefully Selected; Consistent in size and finish; Factory Direct
- Matching field tiles, subway tiles, herringbone, hexagon tiles, borders, moldings and more
- Price per sheet (0.9 sq.ft.); FREE SHIPPING; Large quantities in stock - info@stonecenteronline
Athena Gold Chevron Pattern 12X12 Honed Marble Mosaic, (4x4 or 6x6) Sampleby Buytilesandmore
$12
Free Shipping
Athena Gold Chevron Pattern Tile brightens a space, adding style and sophistication with a warm, natural palette of whites, creams, grays, and rose-colored hues. The marble mosaic tile's classic chevron pattern is enhanced by a soft, honed finish that brings out the natural stone's beauty. The mesh backing eases installation and offers a professional-grade appearance. Elevate a room using Athena Gold Chevron Pattern Tile as a backsplash, accent wall, shower surround, countertop, and more in residential and commercial spaces.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.
Blue 11.75x12by Pearl Drop Ineriors Design(1)
$23.47/sq ft.
Free Shipping
Sponsored- Blue-White Marble, Painted Blue 11.75 X 12 Mosaic
- 0.98 SqFt Each
- 10 Pieces Per Box
- 10.78 SqFt Per Box
- Product Sold By The Piece
- Blue-White marble, painted blue and grey glass in linear form and offset pattern mosaic.
- Suggested Grout Color: Bostik Dimension Diamond H600
- Type: mosaic
- Size: 11.75" x 12"
- Pc/sf/box: 10pc / 10.78sf
- Size: 11.75" x 12" sqft/pc: 0.98sqft Width: 11.75 Depth: 12
Tingle 10.23”x9” Porcelain Mosaic Wall & Floor Tileby MARICERA
$15
Free Shipping
- Number of Pieces Included: 1
- Mesh backing
- This product is made of high quality porcelain tile.
- Each pieces cut by water jet machine makes this high quality.
- With the glossy surface, your interior place will be pop out point.
- This product can be used floor and wall. No need to seal again.
Glass Mosaic Tile Super White Glass Bathroom Wall Kitchen Backsplash, 1 sheetby Stone Center Online
$10/sq ft.
Free Shipping
Super White Glass 1x2 Brick Mosaic Tile
Build a home that reflects the best version of you
Free Shipping
Get free delivery on orders $49+ and stress-free refunds.
Curated Marketplace
Shop thousands of hand-picked pieces in a variety of styles.
Top Customer Service
Expert help is our number one priority (and we’re #1* at giving it).
Beyond Products
Find Inspiration and professionals to achieve your dream home.
*Per Newsweek’s list of “America’s Best Customer Service 2023” in the category of “Online Retailers: Home Goods for Online Home Stores”
Join the discussion about “Under 1 Inch Long Rectangular Mosaic Tile”
Get advice from our community of pros & homeowners
Ditra under 1 inch hex tiles?
by rosylady
Bathrooms
2
Any ideas for a 1 inch back splash under very low kitchen window?
by amhers104
Kitchens
17+15
The choice is to get rocks that range from 1/2-1inch or 1-2 inches.
by farryld
Design Dilemma
5+3
Old timers: do you recall an MCM kitchen w/ a 1' mosaic tile splash?
by mabeldingeldine
Kitchens
5+3
Can we tile over 1/2 inch subfloor?
by Joy
Flooring
8+6
Item 1 of 5