- All Products
- Bath
- Tile
- Thickness: Thin
Thin Turquoise Glass Tile for Floors
- Sheet size: 11 3/4" x 11 3/4"
- Tile Size: Random
- Tile thickness: 1/4" nominal
- Grout Joints: 1/8"
- Coverage Per Sheet: 0.96 SQF
- Sheet Mount: Mesh Backed
- Single Listing
- Total SQ FT in 1 quantity: 0.96 SQF
Areas of application and technical data:
- Floors: Light Residential
- Showers: Walls Only
- Pools: No
- Direct Sunlight: No
- Heat Resistant: Yes
- Frost Resistant: No
- Sheet size: 11 3/4" x 11 3/4"
- Tile Size: random
- Tiles per sheet: 18
- Tile thickness: 1/4" nominal
- Grout Joints: 1/16"
- Coverage Per Sheet: 0.96 SQF
- Cut Into Borders: every 3 rows
- Sheet Mount: Mesh Backed
- Single Listing
- Total SQ FT in 1 quantity: 0.96 SQF
Areas of application and technical data:
- Floors: Light Residential
- Showers: Walls Only
- Pools: No
- Direct Sunlight: No
- Heat Resistant: Yes
- Frost Resistant: No
- Turquoise Painted Amazon Turquoise 3 X 11.75 Pearl Drop Ineriors Mosaic
- 0.24 SqFt Each
- 30 Pieces Per Box
- 7.20 SqFt Per Box
- Product Sold By The Piece
- Amazon Turquoise: painted green, blue and gold glass tile 3x11.75 (0.25sqft per piece). We recommend: Mapei Adsilex P10 bright white.
- Suggested Grout Color: Bostik Dimension Aquamarine H660
- Type: mosaic
- Size: 3" x 11.75"
- Pc/sf/box: 30pc / 7.2sf
- Size: 3" x 11.75" sqft/pc: 0.24sqft Width: 3 Depth: 11.75
- CIRCULAR GLASS TILE SERIES - MINT
- Mint green glass in varying sizes of circles.
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Mint
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Constructed from glass
- Designed with the visual appeal of tile
- Made in China
- Comes with a 1 year limited manufacturer warranty
Installation:
- For floor installation
- Installs with the help of thin-set
- Constructed from glass
- Designed with the visual appeal of tile
- Made in China
- Comes with a 1 year limited manufacturer warranty
Installation:
- For floor installation
- Installs with the help of thin-set
- Made from glass with a glossy stone visual
- High shade variation gives the tile a highly contrasting appearance
- Covered by MSI's 1 year limited manufacturer warranty
- Crafted in China
- This is a GREENGUARD Indoor Air Quality Certified and GREENGUARD Children and Schools Certified product
- To ensure consistency of size and color, please capture all tiles for a project within one order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size
Installation:
- Designed for use on interior and some exterior wall and countertop installations
- This tile can be installed using grout or thin-set installation methods
- Impervious tile has water absorption of less than 0.5% for indoor or outdoor use
- This tile can be used in residential or commercial applications
- Constructed from glass
- Designed with the visual appeal of tile
- Made in China
- Comes with a 1 year limited manufacturer warranty
Installation:
- For floor installation
- Installs with the help of thin-set
- With the 4" x 12" glass wall tile, it's easy to add a splash of contemporary styling to your decor
- This rectangular tile is constructed from durable, frost-resistant glass material and is suitable for installation on walls and countertops
- The attractive combination of an unglazed, smooth finish, a high sheen, elegant shades and subtle variations in tone makes a perfect complement for a wide variety of design schemes
- Grade 1, first-quality glass
- Glossy finish with a high sheen and slight variation in tone
- Impervious flooring has water absorption of less than 0.5% for indoor or some outdoor use
- Use a latex-modified thinset for acceptable bond strength
- This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product
- MOSAIC LINEAR GLASS TILES - SHIMMER GREY GLOSSY
- ** PRICE IS PER SHEET ***
- Glass Tiles 2x8, 2x6, 2x4, 2x12,.on 11 3/4" x 11 3/4 sheet
- Sheet size: 11 3/4" x 11 3/4
- SqFt Per Piece 0.96
- Polished multi-grey glass in subway layout with iridescent effect
- Shimmer Grey glass in subway layout -
- Suggested Grout Color: Bostik Dimension Diamond H600
- Thickness: 3/8"
- Chip sizes are 2x12, 2x8, 2x6, 2x4.
- Pool Rated: Pool Rated for use in Swimming Pools
- Glass Usage – Installation – Care & Maintenance
- Tile Maintenance and More
Acceptable Thin-Sets (White Color):
- CUSTOM BUILDING PRODUCTS: Premium Glass Tile Thin-Set Mortar
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
- Colors may vary from picture, Pictures are only an indication of color, texture and finish
- Constructed from glass
- Designed with the visual appeal of tile
- Made in China
- Comes with a 1 year limited manufacturer warranty
Installation:
- For floor installation
- Installs with the help of thin-set
- Constructed from glass
- Designed with the visual appeal of tile
- Made in China
- Comes with a 1 year limited manufacturer warranty
Installation:
- For floor installation
- Installs with the help of thin-set
- Constructed from glass
- Designed with the visual appeal of tile
- Made in China
- Comes with a 1 year limited manufacturer warranty
Installation:
- For floor installation
- Installs with the help of thin-set
- Constructed from glass
- Designed with the visual appeal of tile
- Made in China
- Comes with a 1 year limited manufacturer warranty
Installation:
- For floor installation
- Installs with the help of thin-set
Specifications:
- Tile Dimensions: 2/3 x 12
- Thickness: 8mm
** Price is per Sheet **
- Material: Glass
- Piece Size: 9.5" x 9.75"
- Sq Ft Per Piece: 0.64
- Thickness: 1/8"
- Colors: Mix of light and Dark Green, White
- Finish: Glossy
Suited for: Residential, Commercial, Light Commercial
For use in
Interior Dry Walls, Shower Walls, Pool Liners, Exterior Walls
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
MAINTENANCE & CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Price is per sq.ft,
- Dimensions: 3" x 12" (4 pcs/ sq.ft)
- Thickness: 8mm
- Surface: Glossy
- Material: Glass
- Application: Wall
Swimming Pool and Wet area Tiles
Color Stained glass tile mosaic
** Price is per Sheet (0.96 sq ft) ***
- Material: Glass
- Sheet Size: 11.75" x 11.75"
- Sq Ft Per Piece: 1.00
- Approximate Piece Size: 1" x 1"
- Thickness: 1/4"
- Colors: Blue Green
- Finish: Glossy
- Brighten up your pool or shower with this series of Handmade Porcelain mosaics.
- Pool rated and acceptable for use on shower walls.
- Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Swimming Pool and Wet area Tiles
Price per Sheet (1.05 sq ft)
- Material: Glass mosaic made of 98% recycled glass tile from Spain
- Sheet Size: 12 1/4" x 12 1/2"
- Sq Ft Per Piece: 1.57
- Piece Size: 2" x 2"
- Thickness: 1/8"
- Colors: Blue Fountain
- Finish: Glossy
- Backing: Polyurethane Cord
- Brighten up your pool or shower with this series of 100% recycled glass mosaics.
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Pools, Pool Liners, Exterior Walls
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Unlike most glass tiles, these tiles are "true color", meaning the color is mixed into
- The molten glass during production, giving them a "stained glass window" depth you
- Simply can't find in machine-made glass.
- Our hand-poured glass tiles have a thickness and character that sets them apart
- From conventional glass tiles that you only get from glass poured into hand-sculpted
- Molds.
- Available in several great designs, there artisan glass tiles can combine to create
- Amazing borders in kitchen or bath or anywhere you want to create an amazing look
- You can't find anywhere else.
- 1 Piece covers 0.5 Linear Ft
- Unlike most glass tiles, these tiles are "true color", meaning the color is mixed into
- The molten glass during production, giving them a "stained glass window" depth you
- Simply can't find in machine-made glass.
- Our hand-poured glass tiles have a thickness and character that sets them apart
- From conventional glass tiles that you only get from glass poured into hand-sculpted
- Molds.
- Available in several great designs, there artisan glass tiles can combine to create
- Amazing borders in kitchen or bath or anywhere you want to create an amazing look
- You can't find anywhere else.
- 1 Piece covers 0.5 Linear Ft
- Price is per sheet
- Dimensions: 12" x 12"
- Thickness: 4mm
- Color: Turquoise Green/ Lagoon
- Surface: Glossy
- Material: Glass
- Application: Wall, Shower Floor, Pool
- Unlike most glass tiles, these tiles are "true color", meaning the color is mixed into
- The molten glass during production, giving them a "stained glass window" depth you
- Simply can�t find in machine-made glass.
- Our hand-poured glass tiles have a thickness and character that sets them apart
- From conventional glass tiles that you only get from glass poured into hand-sculpted
- Molds.
- Available in several great designs, there artisan glass tiles can combine to create
- Amazing borders in kitchen or bath or anywhere you want to create an amazing look
- You can't find anywhere else.
- Unlike most glass tiles, these tiles are "true color", meaning the color is mixed into
- The molten glass during production, giving them a "stained glass window" depth you
- Simply can't find in machine-made glass.
- Our hand-poured glass tiles have a thickness and character that sets them apart
- From conventional glass tiles that you only get from glass poured into hand-sculpted
- Molds.
- Available in several great designs, there artisan glass tiles can combine to create
- Amazing borders in kitchen or bath or anywhere you want to create an amazing look
- You can't find anywhere else.
- 1 Piece covers 0.5 Linear Ft
Swimming Pool and Wet area Tiles
Price per Sheet (1.57 sq ft)
- Material: Glass mosaic made of 98% recycled glass tile from Spain
- Sheet Size: 12 1/4" x 18 1/2"
- Sq Ft Per Piece: 1.57
- Piece Size: 1" x 1"
- Thickness: 1/8"
- Colors: Blue
- Finish: Glossy
- Backing: Polyurethane Cord
- Brighten up your pool or shower with this series of 100% recycled glass mosaics.
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Pools, Pool Liners, Exterior Walls
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Swimming Pool and Wet area Tiles
Color Stained glass tile mosaic
*** Price is per Sheet (0.96 sq ft) ***
- Material: Glass
- Sheet Size: 11.75" x 11.75"
- Sq Ft Per Piece: 1.00
- Approximate Piece Size: 1" x 1"
- Thickness: 1/4"
- Colors: green, blue and iridescent black stained glass mosaic
- Finish: Glossy
- Brighten up your pool or shower with this series of Handmade Porcelain mosaics.
- Pool rated and acceptable for use on shower walls.
- Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- MOSAIC GLASS TILE OVAL SHAPE - MIX OF GREEN, BLUE AND TAUPE
- Swimming Pool and Wet area Tiles
- Material: Glass
- Sheet Size: 12" x 12"
- Sq Ft Per Piece: 1.00
- Approximate Piece Size: 2" x 1"
- Thickness: 1/4"
- Colors: Green, Blue and Taupe
- Finish: Glossy
- Backing: Paper mount
- Brighten up your pool or shower with this series of Handmade Porcelain mosaics.
- Pool rated and acceptable for use on shower walls.
- Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Thickness: 8mm
- Fiberglass Mesh Backing for quick and easy installation
- Harmonious color result in unique pieces of art
- Suitable for kitchen / bathroom / floor / wall and etc
- Chemical Resistant
- Fading and Discoloration Resistant
- Frost Resistant
- Mohs Hardness Scale - 6
- Resistant to Temperature Shock
Color:
- Pure and textured tinted aquamarine glass
Recommended Use:
- Residential
- Interior & Exterior
- Floor & Wall
- Countertops
- Backsplashes
- Tub Surrounds & Showers
- Fireplaces
- Vanities
- Swimming Pools
- Number of Pieces Included: 10
- Sq. ft. per 1 Quantity: 10
- Mesh Backing