- All Products
- Bath
- Tile
- Free Shipping
Thin Glass Tile for Floors
- CIRCULAR GLASS TILE SERIES - OCEAN SKY
- Glass mosaic made of varying sizes of circles in multiple shades of blue.
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Blue, Light blue and White
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- CIRCULAR GLASS TILE SERIES - FOREST
- Glass mosaic made of Blue and Brown in varying sizes of circles
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Blue, Brown and Grey/Green
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Glass Mosaic Inari Gray Pebble, 12 x 12 Inari
- Inari Gray Pebble- White and Multi-Gray Melted Glass Mosaic in Heart Shape.
- Type: Glass Mosaic
- Square-Feet Per Sheet: 0.9791 sqft
- Size of Unit: 11.75x12
- Width: 12 Depth: 12 Thickness: 3/8 inch
- Sold By: Sheet
- ELFancy_Design_sub_272-10-
- MOSAIC LINEAR GLASS TILES - WHITE SHINING
- ** PRICE IS PER SHEET ***
- Glass Tiles 2x8, 2x6, 2x4, 2x12,.on 11 3/4" x 11 3/4 sheet
- Sheet size: 11 3/4" x 11 3/4
- Sq Ft Per Piece 0.96
- Polished white glass in subway layout -
- Suggested Grout Color: Bostik Dimension Diamond H600
- Thickness: 3/8"
- Chip sizes are 2x12, 2x8, 2x6, 2x4.
- Pool Rated: Pool Rated for use in Swimming Pools
- Glass Usage – Installation – Care & Maintenance
- Tile Maintenance and More
Acceptable Thin-Sets (White Color):
- CUSTOM BUILDING PRODUCTS: Premium Glass Tile Thin-Set Mortar
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
- Colors may vary from picture, Pictures are only an indication of color, texture and finish
- Made from glass with a textured stone imitating visual
- Low shade variation gives the tile a uniform appearance
- Adds a splash of contemporary style to your decor
- Mesh sheet makes for easy installation
- To ensure consistency of size and color, please capture all tiles for a project within one order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size
- Installation
- Designed for wall installations
- This tile can be installed using grout
- Able to be used in residential or commercial installation
Specifications
- Width: 12"
- Length: 12"
- Thickness: 5/16"
- Square Foot Per Carton: 10 sq. ft.
- Milano Sea Stack Mosaic
- Sea Stack - Carrara marble and multi-Gray glass in linear offset layout
- Type: Mosaic
- Square-Feet Per Sheet: 0.9791 sqft
- Size of Unit: 11.75 x 12
- Width: 11.75 Depth: 12 Thickness: 3/8 inch
- Sold By: Sheet
- ELFancy_Design_sub_435-10-
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.76
- Thickness: 3/8"
- Colors: Blue
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- VICTORIA METALS SERIES MINI VERSI - FALLS CREEK BLEND
- Victorian Metals aluminum is 98% post-consumer recycled aluminum
- Material: Aluminum and Glass
- Sheet Size: 12" x 12"
- Piece Size: Mixed: 1" x 1", 2" x 2", 1" x 2"
- Thickness: 3/8"
- Color: Falls Creek Blend
- Finish: Etched, Polished and Matte
- Backing: Mesh
- Recommended Usage
This aluminum and glass blend has a combination of shiny etched, polished, and matte textures. The aluminum pieces are hollow on the back for a super light weight feel. When installing, there is no need to fill the entire back cavity as the extrusion lugs on the pieces provide an excellent mechanical bond.
Features:
- The metals are 100% aluminum. The aluminum copper and bronze colors are produced by a staining process. Each piece of metal has an ‘etched’ surface finish and depending on the color, the etching is more prominent on certain colors than others. For example, the etching is more noticeable on the lighter colored metals than the darker. Within the aluminum mosaic blend, there are random inserts of 1x1 glass mosaics. The glass mosaic edges are capped with bronze polished framed pieces to add a unique and contemporary look to the Victoria Metals. The bronze pieces are produced by an anodizing process. During installation, excess grout between the metal caps and glass pieces can be removed with either a soft toothbrush or toothpick.
- The Victoria Metals are 8mm thick. Each piece has a recessed backing and therefore is considerably lighter in weight as oppose to most other metal mosaics that we offers.
- These metal colors will be installed randomly on the sheet from the factory which adds to the character of the product.
Installation Tips:
- Always cut with the finished side down.
- When cutting, feed the product very slowly to avoid grabbing.
- Do not cover or protect the surface with adhesive tape of any kind.
- Care & Maintenance
- Regular cleaning with a neutral tile cleaner and a soft cloth or sponge is recommended. Use cleaning products that don’t leave a residue behind. Rinse with a soft wet cloth. Buff dry with a soft cloth. Do not use acids or cleaners containing acids, oils, corrosive chemicals, or abrasive cleaners.
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.75
- Thickness: 3/8"
- Colors: White
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Color: Multicolor;
- Size: ;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy)|Honed (Matte)|Textured|Tumbled;
- Brown Grey Light Blue Glass Mix Black Marble Mosaic Tile;
- 5/8" square pieces mounted on 12"x12" sturdy mesh tile sheet;
- 18 rows and 18 columns with 324 pieces on each sheet; 5/16" thickness;
- Finish: Glossy, Matt, Textured Glass and Tumbled Antique Non Slip Marble;
- CIRCULAR GLASS TILE SERIES - MINT
- Mint green glass in varying sizes of circles.
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Mint
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- 10.5 x 12.5 Van Gogh Sky Crackle Glass + Stone Mosaic
- Van Gogh Sky - 2x2 arabesque shape white carrara marble mixed with Gray and blue crackle glass mosaic
- Type: Crackle Glass + Stone Mosaic
- Square-Feet Per Sheet: 0.8402 sqft
- Size of Unit: 11x11
- Width: 10.5 Depth: 12.5 Thickness: 3/8 inch
- Sold By: Sheet
- ELFancy_Design_sub_1039-10-
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.75
- Thickness: 3/8"
- Colors: Cappuccino
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.76
- Thickness: 3/8"
- Colors: Burano Lace
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.75
- Thickness: 3/8"
- Colors: Gray
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- CIRCULAR GLASS TILE SERIES - SNOW
- Glass mosaic made of varying sizes of circles in Glossy White glass
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: White
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Made from glass with a textured stone imitating visual
- Low shade variation gives the tile a uniform appearance
- Adds a splash of contemporary style to your decor
- Mesh sheet makes for easy installation
- To ensure consistency of size and color, please capture all tiles for a project within one order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size
- Installation
- Designed for wall installations
- This tile can be installed using grout
- Able to be used in residential or commercial applications
Specifications
- Width: 12"
- Length: 12"
- Thickness: 5/16"
- Square Foot Per Carton: 10 sq. ft.
- VICTORIA METALS SERIES INTERLOCK - MT. STERLING BLEND
- Victorian Metals aluminum is 98% post-consumer recycled aluminum
- Material: Aluminum and Glass
- Sheet Size: 12" x 12"
- Piece Size: Mixed: 5/8" x 2", 5/8"x 4", 5/8" x 6"
- Thickness: 3/8"
- Color: Mt. Sterling Blend
- Finish: Etched, Polished and Matte
- Backing: Mesh
- Recommended Usage
This aluminum and glass blend has a combination of shiny etched, polished, and matte textures. The aluminum pieces are hollow on the back for a super light weight feel. When installing, there is no need to fill the entire back cavity as the extrusion lugs on the pieces provide an excellent mechanical bond.
Features:
- The metals are 100% aluminum. The aluminum copper and bronze colors are produced by a staining process. Each piece of metal has an ‘etched’ surface finish and depending on the color, the etching is more prominent on certain colors than others. For example, the etching is more noticeable on the lighter colored metals than the darker. Within the aluminum mosaic blend, there are random inserts of 1x1 glass mosaics. The glass mosaic edges are capped with bronze polished framed pieces to add a unique and contemporary look to the Victoria Metals. The bronze pieces are produced by an anodizing process. During installation, excess grout between the metal caps and glass pieces can be removed with either a soft toothbrush or toothpick.
- The Victoria Metals are 8mm thick. Each piece has a recessed backing and therefore is considerably lighter in weight as oppose to most other metal mosaics that we offers.
- These metal colors will be installed randomly on the sheet from the factory which adds to the character of the product.
Installation Tips:
- Always cut with the finished side down.
- When cutting, feed the product very slowly to avoid grabbing.
- Do not cover or protect the surface with adhesive tape of any kind.
- Care & Maintenance
- Regular cleaning with a neutral tile cleaner and a soft cloth or sponge is recommended. Use cleaning products that don’t leave a residue behind. Rinse with a soft wet cloth. Buff dry with a soft cloth. Do not use acids or cleaners containing acids, oils, corrosive chemicals, or abrasive cleaners.
- Milano Oompa Carrara Glass and Stone Mosaic
- Oompa Carrara - Pure White Glass & White Carrara Marble in Multi-Size Round Shape.
- Type: Glass and Stone Mosaic
- Square-Feet Per Sheet: 0.9587 sqft
- Size of Unit: 11.75 x 11.75
- Width: 11.75 Depth: 11.75 Thickness: 3/8 inch
- Sold By: Sheet
- Marble and Glass in Pebble look - Ocean
- A blend of Thassos Marble with white glass in a Pebble layout style
- ** Price is per Sheet ***
- Material: Marble and Glass
- Sheet Size: 12" x 12" (1 sq ft per sheet)
- Thickness: 3/8"
- Colors: Blue White Grey
- Finish: Glossy
- Uses: Interior Dry Walls, Interior Floors (Residential), Shower Walls, Shower Floors (Residential)
- Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8"away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
- Maintenance and Care
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- VICTORIA METALS SERIES INTERLOCK - FALLS CREEK BLEND
- Victorian Metals aluminum is 98% post-consumer recycled aluminum
- Material: Aluminum and Glass
- Sheet Size: 12" x 12"
- Piece Size: Mixed: 5/8" x 2", 5/8"x 4", 5/8" x 6"
- Thickness: 3/8"
- Color: Falls Creek Blend
- Finish: Etched, Polished and Matte
- Backing: Mesh
- Recommended Usage
This aluminum and glass blend has a combination of shiny etched, polished, and matte textures. The aluminum pieces are hollow on the back for a super light weight feel. When installing, there is no need to fill the entire back cavity as the extrusion lugs on the pieces provide an excellent mechanical bond.
Features:
- The metals are 100% aluminum. The aluminum copper and bronze colors are produced by a staining process. Each piece of metal has an ‘etched’ surface finish and depending on the color, the etching is more prominent on certain colors than others. For example, the etching is more noticeable on the lighter colored metals than the darker. Within the aluminum mosaic blend, there are random inserts of 1x1 glass mosaics. The glass mosaic edges are capped with bronze polished framed pieces to add a unique and contemporary look to the Victoria Metals. The bronze pieces are produced by an anodizing process. During installation, excess grout between the metal caps and glass pieces can be removed with either a soft toothbrush or toothpick.
- The Victoria Metals are 8mm thick. Each piece has a recessed backing and therefore is considerably lighter in weight as oppose to most other metal mosaics that we offers.
- These metal colors will be installed randomly on the sheet from the factory which adds to the character of the product.
Installation Tips:
- Always cut with the finished side down.
- When cutting, feed the product very slowly to avoid grabbing.
- Do not cover or protect the surface with adhesive tape of any kind.
- Care & Maintenance
- Regular cleaning with a neutral tile cleaner and a soft cloth or sponge is recommended. Use cleaning products that don’t leave a residue behind. Rinse with a soft wet cloth. Buff dry with a soft cloth. Do not use acids or cleaners containing acids, oils, corrosive chemicals, or abrasive cleaners.
Colors:
- Tan - Tan Beige & Light Brown Broken Glass with Rainbow Round Glass Inserts.
- Blue Laguna - Blue Irregular Broken Glass in Light Blue Color
- Royal - Blue , Tan Irregular Broken Glass in Light Blue Color
- Light Grey - Grey Irregular Broken Glass in White & Light Grey Color.
- Material: Glass
- Sheet Size: 11" x 11 1/2"
- SqFt Per Piece: 0.88
- Thickness: 3/8"
- Finish: Glossy
- Interior Dry Walls, Shower Walls, Residential, Commercial, Light Commercial
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
Features
- Made from glass with a smooth glass visual
- Low shade variation gives the tile a uniform appearance
- Will bring a clear, neat look to your room
- Mesh sheet makes for easy installation
- To ensure consistency of size and color, please capture all tiles for a project within one order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size
- Designed for wall installations
- This tile can be installed using grout
- Able to be used in residential or commercial use
Specifications
- Width: 12"
- Length: 12"
- Thickness: 5/16"
- Square Foot Per Carton: 10 sq. ft.
Water Jet Mosaic. White, Grey glass and Carrara marble in water wave shape.
Price per Sheet
- Material: Glass and Carrara Marble
- Piece Size: 11 1/2" x 12 1/2"
- Sq Ft Per Piece: 1
- Thickness: 3/8"
- Colors: White, Grey
- Brighten up your bathroom, kitchen and shower with this series
- Aacceptable for use on shower walls and floors.
- The polyurethane cord backing makes installation easy.
- For use in Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Recommended Thin-Set: MAPEI Adesilex-P10 Premium Glass Tile Mortar mixed with MAPEI Keraply Latex Mortar Additive
Suggested Grout: MAPEI Ultracolor Plus FA, MAPEI FlexColor CQ or BOSTIK Trucolor Rapidcure
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
Maintenance & Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- TAHITIAN PEARL - CARRARA MARBLE IN CROSS WEAVED WITH WHITE PEARL
- Carrara marble mixed with white pearl in cross weaved Design.
- Material: Carrara Marble and Pearl Bridge
- Sheet Size: 12 1/4" x 12 1/4"
- Thickness: 3/8"
- Sq Ft Per Piece: 1.04
- Colors: White Natural
Can install the residential shower when sealed.
Carrara marble is a type of white or blue-grey marble popular for use in sculpture and building decor. It is quarried in the city of Carrara in the province of Massa and Carrara in the Lunigiana, the northernmost tip of modern-day Tuscany, Italy.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
Maintenance & Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Eclipse Dusk 12x12 - Mosaic is a mix of Carrara and Bardiglio marble. This Mosaic comes in a Polished finish.
- Suggested Grout Color: Bostik Trucolor White H152
- Made from glass with a smooth glass visual
- Low shade variation gives the tile a uniform appearance
- Adds a splash of chic styling to your decor
- To ensure consistency of size and color, please capture all tiles for a project within one order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size
- Installation
- Designed for wall installations
- This tile can be installed using grout
- Suitable for residential or commercial applications
Specifications
- Width: 12"
- Length: 12"
- Thickness: 5/16"
- Square Foot Per Carton: 10 sq. ft.
*** PRICE PER SHEET ***
Eco Rocks are made of Terrazzo, that consist of chips of marble, granite, quartz, glass, shell or other suitable materials bonded together by a cement. This material is 100% recycled and is renewable and recyclable.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Terrazzo pebbles
- Piece Size: 12"x12"
- Individual Size: Random
- Sq Ft Per Piece: 1
- Thickness: 3/8"
- Colors: White (Crushed Crystal)
- Finish: Tumbled
- Notes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not
- Considered a defect of the material but a characteristic.
- Installation Guide
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- VICTORIA METALS SERIES MINI VERSI - MT. STERLING BLEND
- Victorian Metals aluminum is 98% post-consumer recycled aluminum
- Material: Aluminum and Glass
- Sheet Size: 12" x 12"
- Piece Size: Mixed: 1" x 1", 2" x 2", 1" x 2"
- Thickness: 3/8"
- Color: Mt. Sterling Blend
- Finish: Etched, Polished and Matte
- Backing: Mesh
- Recommended Usage
This aluminum and glass blend has a combination of shiny etched, polished, and matte textures. The aluminum pieces are hollow on the back for a super light weight feel. When installing, there is no need to fill the entire back cavity as the extrusion lugs on the pieces provide an excellent mechanical bond.
Features:
- The metals are 100% aluminum. The aluminum copper and bronze colors are produced by a staining process. Each piece of metal has an ‘etched’ surface finish and depending on the color, the etching is more prominent on certain colors than others. For example, the etching is more noticeable on the lighter colored metals than the darker. Within the aluminum mosaic blend, there are random inserts of 1x1 glass mosaics. The glass mosaic edges are capped with bronze polished framed pieces to add a unique and contemporary look to the Victoria Metals. The bronze pieces are produced by an anodizing process. During installation, excess grout between the metal caps and glass pieces can be removed with either a soft toothbrush or toothpick.
- The Victoria Metals are 8mm thick. Each piece has a recessed backing and therefore is considerably lighter in weight as oppose to most other metal mosaics that we offers.
- These metal colors will be installed randomly on the sheet from the factory which adds to the character of the product.
Installation Tips:
- Always cut with the finished side down.
- When cutting, feed the product very slowly to avoid grabbing.
- Do not cover or protect the surface with adhesive tape of any kind.
- Care & Maintenance
- Regular cleaning with a neutral tile cleaner and a soft cloth or sponge is recommended. Use cleaning products that don’t leave a residue behind. Rinse with a soft wet cloth. Buff dry with a soft cloth. Do not use acids or cleaners containing acids, oils, corrosive chemicals, or abrasive cleaners.
- Marble and Glass in Pebble look - Blue
- A blend of Marble with white glass in a Pebble layout style
- ** Price is per Sheet ***
- Material: Marble and Glass
- Sheet Size: 12" x 12" (1 sq ft per sheet)
- Thickness: 3/8"
- Colors: White, Blue and Grey
- Finish: Glossy
- Uses: Interior Dry Walls, Interior Floors (Residential), Shower Walls, Shower Floors (Residential)
- Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8"away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
- Maintenance and Care
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Made from glass with a smooth glass visual
- Low shade variation gives the tile a uniform appearance
- Adds a splash of contemporary style to your decor
- Mesh sheet makes for easy installation
- To ensure consistency of size and color, please capture all tiles for a project within one order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size
- Installation
- Designed for wall installations
- This tile can be installed using grout
- Able to be used in residential or commercial locations
Specifications
- Width: 12"
- Length: 12"
- Thickness: 5/16"
- Square Foot Per Carton: 10 sq. ft.
- Calacatta Marble and Glass in Pebble look - Gold
- A blend of Calacatta Marble with white glass in a Pebble layout style
- ** Price is per Sheet ***
- Material: Calacatta Marble and Glass
- Sheet Size: 12" x 12" (1 sq ft per sheet)
- Thickness: 3/8"
- Colors: White, Gold and Grey
- Finish: Glossy
- Uses: Interior Dry Walls, Interior Floors (Residential), Shower Walls, Shower Floors (Residential)
- Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8"away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
- Maintenance and Care
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Aphrodite Dusk: Calacatta white marble and Bardiglio grey marble in heart shape mosaic. This Mosaic comes in a Polished finish.
- Suggested Grout Color: Bostik Trucolor White H152
24-karat gold
Price per Sheet
- Material: 98% recycled Glass and authentic 24k Gold
- Sheet Size: 12 1/4" x 12 1/4"
- Piece Size: 1" x 1"
- Thickness: 1/8"
- Colors: Mix
Made in Spain
Installation Instructions -
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
- Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.
- Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
- Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
- Maintenance & Care -
- Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
- Tile Maintenance and More
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11 3/4"x11.5"
- Individual Size: 2"x6"
- Sq Ft Per Piece: 0.94
- Thickness: 3/8"
- Colors: Burano Lace
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish