Windmill Modern Fully Assembled Ceiling Fans

72 Inch Cattleman Windmill Ceiling Fan | The American Fan-With inspirations from the Wild West, this fan is truly one of a kind. Ol' rusted steel and a solid iron look are perfect for any outdoor space or home. Its hand-painted, barn-metal blades with rustic iron tips, motor, and frame is a nod to the quaint yet classic history of the Old West.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

60 Inch Weathered Rust Grey with Patina Bronze Tips Windmill Ceiling Fan | The Patriot Fan-Beautiful authentic rustic grey ceiling fan will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. The Patina Bronze Tips adds a touch of elegance to this fan. This finish looks amazing with a river rock fireplace, metal, and wood accents. This finish looks great with a galvanized silver motor and frame but also looks amazing with Oil Rubbed Bronze - your choice.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch The Rip Windmill Ceiling Fan -This finish has it ALL - grit, class, and loyalty, just like Rip Wheeler in Yellowstone. We have blended some of our most popular finishes and created this incredible finish. The blades are Patina Copper and Barn Metal with a touch of Rustic Black has that rustic, gritty look and feel. The motor and frame are Rustic Black, a classy and classic Rip look. All our fans offer aluminum and steel materials make it durable and loyal, just like Rip!

Our windmill fans are hand-crafted, American-made, and truly one of a kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements. Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3-speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family-owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more.
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light is available upon request additional fee
• Remote available upon request additional fee
• It can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides unique aluminum lightweight, 18-blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances, and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

96 Inch Weathered Texas Turquoise with Patina Bronze Tips Windmill Ceiling Fan | The American Fan- This beautiful mix of turquoise colors will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish has a ton of character and color and really makes a bold statement in any room. The Patina Bronze Tips adds elegance and character like no other ceiling fan on the market.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Windmill Ceiling Fan Galvanized Silver| The American Fan- Windmill ceiling fan for dining room, house warming, house renovation, horse barn, large room, living room, new home, office, outdoor spaces, vaulted ceiling, ranch house, farmhouse, cabin living, rustic decor, man cave, modern decor, Christmas, windmill ceiling fan

This finish will stay the same over time...It’s the actual raw aluminum and steel metal components. Authentic galvanized silver makes this unique ceiling fan the perfect addition to your indoor or outdoor space. This is a classic finish with a sleek shine from the aluminum blades.

Longevity is key - the finish won't change and the strength of the aluminum blades won’t change, sag or corrode.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

72 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

72 Inch Oil Rubbed Bronze Windmill Ceiling Fan | The American Fan- The look of the Oil Rubbed Bronze finish is designed to simulate aged bronze. This finish is very dark and varies from a deep chocolate brown and has copper undertones. A Windmill Ceiling Fan with an oil-rubbed bronze finish is perfect for rustic or modern living spaces. Oil Rubbed Bronze plumbing and light fixtures and door hardware are very popular and this finish is a great match.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current, and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

60 Inch High Sierra Windmill Ceiling Fan | The American - This classic tooled leather look with textured browns on blades and matte black motor and frame. Powder-coated finish.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Rustic Copper Windmill Ceiling Fan | The American Fan -Transform your living space with this custom Rustic Copper windmill ceiling fan. The finish looks like aged copper that hasn’t quite been there long enough to Patina. The entire fan can be Rustic Copper or just the blades. You choose. This finish looks really nice with an Oil Rubbed Bronze motor and frame. The aged, darker areas on the blades pair well with the Oil Rubbed Bronze.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current, and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

96 Inch Windmill Ceiling Fan Galvanized Silver| The American Fan- Windmill ceiling fan for dining room, house warming, house renovation, horse barn, large room, living room, new home, office, outdoor spaces, vaulted ceiling, ranch house, farmhouse, cabin living, rustic decor, man cave, modern decor, Christmas

This finish will stay the same over time...It’s the actual raw aluminum and steel metal components. Authentic galvanized silver makes this unique ceiling fan the perfect addition to your indoor or outdoor space. This is a classic finish with a sleek shine from the aluminum blades.

Longevity is key - the finish won't change and the strength of the aluminum blades won’t change, sag or corrode.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

Navajo Wool Windmill Ceiling Fan | The Patriot- Weaved together effortlessly, this fan finish is a collection of white, cream, tan and blue hues. It evokes the warmth of rich woven fibers. The handcrafted texture on each blade has an intricately detailed gradience that can only come from the hands of a true artist. This fan finish is a new favorite and would enrich any room.

Our windmill ceiling fans are handcrafted, American-made, and indeed one kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements. Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family owned and operated
• Endless Custom Finishes can match fixtures, paints, lighting, and more.
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are handcrafted, they might have slight variances, and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

The Rip Windmill Ceiling Fan -This finish has it ALL - grit, class, and loyalty, just like Rip Wheeler in Yellowstone. We have blended some of our most popular finishes and created this incredible finish. The blades are Patina Copper and Barn Metal with a touch of Rustic Black has that rustic, gritty look and feel. The motor and frame are Rustic Black, a classy and classic Rip look. All our fans offer aluminum and steel materials make it durable and loyal, just like Rip!

Our windmill fans are hand-crafted, American-made, and truly one of a kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements. Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3-speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family-owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more.
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light is available upon request additional fee
• Remote available upon request additional fee
• It can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides unique aluminum lightweight, 18-blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances, and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

96 Inch Laramie Windmill Ceiling Fan | The American Fan - This fan will take you back to the iconic memory of grandma's old wooden screen door. This fan is hand-painted, weathered, antique white blades with barn-metal motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

84 Inch Cattleman Windmill Ceiling Fan | The American Fan-With inspirations from the Wild West, this fan is truly one of a kind. Ol' rusted steel and a solid iron look are perfect for any outdoor space or home. Its hand-painted, barn-metal blades with rustic iron tips, motor, and frame is a nod to the quaint yet classic history of the Old West.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

66 Inch Weathered Texas Turquoise Windmill Ceiling Fan | The Patriot Fan-This beautiful mix of turquoise colors will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish has a ton of character and color and really makes a bold statement in any room.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

72 Inch Charred Whiskey Barrel Windmill Ceiling Fan | The American -Think of that special end to a roaring fire, and you have this finish. The copper tones from the burning embers engulf the back of the blade on this design and the wood remnants that have turned to charcoal span the face of the blade. This fan is our first multi-finish design, a one-of-a-kind that will add sparkle to any room or outdoor space.

Our windmill ceiling fans are handcrafted, American-made, and indeed one kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72", 84" and 96" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family owned and operated
• Endless Custom Finishes can match fixtures, paints, lighting, and more.
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is handcrafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9" down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

96 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

46 Inch Weathered Barn Red Finish with Patina Bronze Tips Windmill Ceiling Fan | The Patriot-You're sure to make a bold impression when you use Barn Red as part of your Windmill Ceiling Fan design. Barn Red is sure to be a standout piece in any room! If you want the look and feel of old barn wood but the durability of metal this finish is for you. The Patina Bronze Tips adds elegance and character like no other ceiling fan on the market.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

60 Inch Windmill Ceiling Fan Galvanized Silver | The American Fan- Windmill ceiling fan for dining room, house warming, house renovation, horse barn, large room, living room, new home, office, outdoor spaces, vaulted ceiling, ranch house, farmhouse, cabin living, rustic decor, man cave, modern decor, Christmas

This finish will stay the same over time...It’s the actual raw aluminum and steel metal components. Authentic galvanized silver makes this unique ceiling fan the perfect addition to your indoor or outdoor space. This is a classic finish with a sleek shine from the aluminum blades.

Longevity is key - the finish won't change and the strength of the aluminum blades won’t change, sag or corrode.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

72 Inch Weathered Texas Turquoise with Patina Bronze Tips Windmill Ceiling Fan | The Patriot Fan- This beautiful mix of turquoise colors will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish has a ton of character and color and really makes a bold statement in any room. The Patina Bronze Tips adds elegance and character like no other ceiling fan on the market.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

66 Inch The Rip Windmill Ceiling Fan -This finish has it ALL - grit, class, and loyalty, just like Rip Wheeler in Yellowstone. We have blended some of our most popular finishes and created this incredible finish. The blades are Patina Copper and Barn Metal with a touch of Rustic Black has that rustic, gritty look and feel. The motor and frame are Rustic Black, a classy and classic Rip look. All our fans offer aluminum and steel materials make it durable and loyal, just like Rip!

Our windmill fans are hand-crafted, American-made, and truly one of a kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements. Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3-speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family-owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more.
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light is available upon request additional fee
• Remote available upon request additional fee
• It can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides unique aluminum lightweight, 18-blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances, and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

72 Inch Windmill Ceiling Fan Galvanized Silver| The American Fan- Windmill ceiling fan for dining room, house warming, house renovation, horse barn, large room, living room, new home, office, outdoor spaces, vaulted ceiling, ranch house, farmhouse, cabin living, rustic decor, man cave, modern decor, Christmas

This finish will stay the same over time...It’s the actual raw aluminum and steel metal components. Authentic galvanized silver makes this unique ceiling fan the perfect addition to your indoor or outdoor space. This is a classic finish with a sleek shine from the aluminum blades.

Longevity is key - the finish won't change and the strength of the aluminum blades won’t change, sag or corrode.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Cattleman Windmill Ceiling Fan | The American Fan-With inspirations from the Wild West, this fan is truly one of a kind. Ol' rusted steel and a solid iron look are perfect for any outdoor space or home. Its hand-painted, barn-metal blades with rustic iron tips, motor, and frame is a nod to the quaint yet classic history of the Old West.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

72 Inch The Rip Windmill Ceiling Fan -This finish has it ALL - grit, class, and loyalty, just like Rip Wheeler in Yellowstone. We have blended some of our most popular finishes and created this incredible finish. The blades are Patina Copper and Barn Metal with a touch of Rustic Black has that rustic, gritty look and feel. The motor and frame are Rustic Black, a classy and classic Rip look. All our fans offer aluminum and steel materials make it durable and loyal, just like Rip!

Our windmill fans are hand-crafted, American-made, and truly one of a kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements. Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3-speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family-owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more.
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light is available upon request additional fee
• Remote available upon request additional fee
• It can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides unique aluminum lightweight, 18-blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances, and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

72 Inch Barn Metal Windmill Ceiling Fan | The Patriot Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

66 Inch Cattleman Windmill Ceiling Fan | The American Fan-With inspirations from the Wild West, this fan is truly one of a kind. Ol' rusted steel and a solid iron look are perfect for any outdoor space or home. Its hand-painted, barn-metal blades with rustic iron tips, motor, and frame is a nod to the quaint yet classic history of the Old West.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

Weathered Texas Turquoise with Patina Bronze Tips Windmill Ceiling Fan | The Patriot Fan- This beautiful mix of turquoise colors will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish has a ton of character and color and really makes a bold statement in any room. The Patina Bronze Tips adds elegance and character like no other ceiling fan on the market.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

66 Inch High Sierra Windmill Ceiling Fan | The American - This classic tooled leather look with textured browns on blades and matte black motor and frame. Powder-coated finish.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

46 Inch Weathered Rust Grey Windmill Ceiling Fan | The Patriot Fan- Beautiful authentic rustic grey ceiling fan will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish looks great with a galvanized silver motor and frame but also looks amazing with Oil Rubbed Bronze - your choice.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

84 Inch Weathered Texas Turquoise with Patina Bronze Tips Windmill Ceiling Fan | The American Fan- This beautiful mix of turquoise colors will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish has a ton of character and color and really makes a bold statement in any room. The Patina Bronze Tips adds elegance and character like no other ceiling fan on the market.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

72 Inch Heritage Windmill Ceiling Fan | The American - This fan is the quintessential nostalgic pasture windmill look. Tarnished, tin blades with red tips and a rustic, black motor.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

60 Inch Oil Rubbed Bronze Windmill Ceiling Fan | The American Fan- The look of the Oil Rubbed Bronze finish is designed to simulate aged bronze. This finish is very dark and varies from a deep chocolate brown and has copper undertones. A Windmill Ceiling Fan with an oil-rubbed bronze finish is perfect for rustic or modern living spaces. Oil Rubbed Bronze plumbing and light fixtures and door hardware are very popular and this finish is a great match.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current, and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

46 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

96 Inch Cattleman Windmill Ceiling Fan | The American Fan-With inspirations from the Wild West, this fan is truly one of a kind. Ol' rusted steel and a solid iron look are perfect for any outdoor space or home. Its hand-painted, barn-metal blades with rustic iron tips, motor, and frame is a nod to the quaint yet classic history of the Old West.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

60 Inch Weathered Barn Red Finish with Patina Bronze Tips Windmill Ceiling Fan | The Patriot-You're sure to make a bold impression when you use Barn Red as part of your Windmill Ceiling Fan design. Barn Red is sure to be a standout piece in any room! If you want the look and feel of old barn wood but the durability of metal this finish is for you. The Patina Bronze Tips adds elegance and character like no other ceiling fan on the market.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

66 Inch Brushed Metal Windmill Ceiling Fan | The Patriot Fan- You're sure to make a dynamic impression when you use Brushed Metal as part of your Windmill Ceiling Fan design. Brushed metal is one of the five most common metals used in designs today. This finish takes time and patience since it is hand-sanded. It has the look of new corrugated metal panels and even has an artistic look that fits in contemporary and modern spaces. Single Side included or both sides per request additional charge.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.