- All Products
- Bath
- Tile
- Width: Large Format
Large Format Under 1 Inch Long Glass Round Tile
- Carrara Oompa Carrara 11.75 X 11.75 Elite Mosaic
- 0.96 SqFt Each
- 10 Pieces Per Box
- 9.60 SqFt Per Box
- Product Sold By The Piece
- Oompa Carrara - Pure White Glass & White Carrara Marble in Multi-Size Round Shape.
- Suggested Grout Color: Bostik Dimension Diamond H600
- Type: mosaic
- Size: 11.75" x 11.75"
- Pc/sf/box: 10pc / 9.6sf
- Size: 11.75" x 11.75" sqft/pc: 0.96sqft Width: 11.75 Depth: 11.75
- Newport Scale Loft 9.5x9.75 - Stained Glass Tile. White and Grey full body glass mosaic in fish scale shape.
- Due to sharp edges of tile, not allowed to be installed in a place where bare foot will step on it. Can be used as Swimming pool waterline tile.
- Suggested Grout Color: Bostik Trucolor White H152
- For Swimming Pool Installation, we recommend the following:
- Recommended Thin-Set: MAPEI Adesilex-P10 Premium Glass Tile Mortar mixed with MAPEI Keraply Latex Mortar Additive
- Suggested Grout: MAPEI Ultracolor Plus FA, MAPEI FlexColor CQ or BOSTIK Trucolor Rapidcure
** Price is per Sheet **
- Material: Glass
- Piece Size: 9.5" x 9.75"
- Sq Ft Per Piece: 0.64
- Thickness: 1/8"
- Colors: Mix of light and Dark Green, White
- Finish: Glossy
Suited for: Residential, Commercial, Light Commercial
For use in
Interior Dry Walls, Shower Walls, Pool Liners, Exterior Walls
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
MAINTENANCE & CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- For Swimming Pool Installation, we recommend the following:
- Recommended Thin-Set: MAPEI Adesilex-P10 Premium Glass Tile Mortar mixed with MAPEI Keraply Latex Mortar Additive
- Suggested Grout: MAPEI Ultracolor Plus FA, MAPEI FlexColor CQ or BOSTIK Trucolor Rapidcure
- Dragon Scale Turquoise 9.5 x 9.5 - Turquoise Glass mosaic in dragon scale pattern.
- Suggested Grout Color: Bostik Dimension Diamond H600
- Milano Oompa Carrara Glass and Stone Mosaic
- Oompa Carrara - Pure White Glass & White Carrara Marble in Multi-Size Round Shape.
- Type: Glass and Stone Mosaic
- Square-Feet Per Sheet: 0.9587 sqft
- Size of Unit: 11.75 x 11.75
- Width: 11.75 Depth: 11.75 Thickness: 3/8 inch
- Sold By: Sheet
- CIRCULAR GLASS TILE SERIES - OCEAN SKY
- Glass mosaic made of varying sizes of circles in multiple shades of blue.
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Blue, Light blue and White
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
Blue and Grey glass in varying sizes of circles.
Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4" x 10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Blue Grey
- Finish: Polished
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Suggested Grout Color: Bostik Trucolor White H152
- Dragon Scale Deep Ocean 12 x 12 = A mix of Azul Cielo, Palissandro Blue and Thassos Marble in a scale pattern mosaic.
- Suggested Grout Color: TBD
- CIRCULAR GLASS TILE SERIES - FOREST
- Glass mosaic made of Blue and Brown in varying sizes of circles
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Blue, Brown and Grey/Green
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Dragon Scale Calacatta Grey 9.5 x 9.75 - Dragon scale marble mosaic.
- Suggested Grout Color: TBD
- Growing Growing Grey 12 X 12 Mosaic
- 1.00 SqFt Each
- 13 Pieces Per Box
- 13.00 SqFt Per Box
- Product Sold By The Piece
- Roman Series- Growing Grey 11.5x11.5
- Suggested Grout Color: Bostik Trucolor White H152
- Type: mosaic
- Size: 12" x 12"
- Pc/sf/box: 13pc / 13sf
- Size: 12" x 12" sqft/pc: 1sqft Width: 12 Depth: 12
- Abby Van Gogh Abby 11 X 11 Mosaic
- 0.84 SqFt Each
- 10 Pieces Per Box
- 8.40 SqFt Per Box
- Product Sold By The Piece
- Van Gogh Abby 11x11 (10 sheets/bx) (72 bx/plt) (0.84sf/pc). Need to seal the tile for the residential shower wall installation.
- Suggested Grout Color: Bostik Trucolor White H152
- Type: mosaic
- Size: 11" x 11"
- Pc/sf/box: 10pc / 8.4sf
- Size: 11" x 11" sqft/pc: 0.84sqft Width: 11 Depth: 11
AS MARBLE IS A NATURAL STONE THERE IS VARIATION AND COLOR BETWEEN PRODUCTS. DUE TO DIFFERENT LIGHTING THE IMAGE SHOWN MAY VARY SLIGHTLY IN COLOR. IT IS RECOMMENDED TO ORDER A SAMPLE FIRST.
DUE TO THE COMPLEXITY OF THE WATERJET DESIGN A SAMPLE WILL NOT BE A BLE TO SHOW THE FULL DESIGN. WE RECOMMEND THAT YOU ORDER 1 FULL SHEET TO REALLY SEE THE DESIGN OF THE MATERIAL.
- Material: Marble Crema Marfil
- Color: Light Beige
- Sheet Size: 11.5"x11.75"
- Coverage: 0.94 SF
- Sold By Sheet
- Finish: Polished
- Recommended Installation: Floor, Wall, Accent, Backsplash, Shower
- Scale Ocean- Newport Scale Ocean 9.5 X 9.75 Mosaic
- 0.64 SqFt Each
- 22 Pieces Per Box
- 14.08 SqFt Per Box
- Product Sold By The Piece
- Newport Scale Ocean- 9.5x9.75 . Stained Glass Tile. Pure white and iridescent blue full body mosaic in fish scale shape. 20 pcs per box (72bx/PLT)
- Due to sharp edges of tile, not allowed to be installed in a place where bare foot will step on it.
- Type: mosaic
- Size: 9.5" x 9.75"
- Pc/sf/box: 22pc / 14.08sf
- Size: 9.5" x 9.75" sqft/pc: 0.64sqft Width: 9.5 Depth: 9.75
- CIRCULAR GLASS TILE SERIES - MINT
- Mint green glass in varying sizes of circles.
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Mint
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- CIRCULAR GLASS TILE SERIES - OCEAN BLUE
- Soft turquoise glass in varying sizes of circles
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- SqFt Per Piece: 0.80
- Thickness: 3/8"
- Colors: Ocean Blue
- Finish: Glossy
- Interior Dry Walls, Shower Walls, Shower Floors, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Scale Sky- Newport Scale Sky 9.5 X 9.75 Mosaic
- 0.64 SqFt Each
- 20 Pieces Per Box
- 12.86 SqFt Per Box
- Product Sold By The Piece
- Newport Scale Sky- 9.5x9.75 White and blue full body mosaic in fish scale shape.
- Type: mosaic
- Size: 9.5" x 9.75"
- Pc/sf/box: 20pc / 12.86sf
- Size: 9.5" x 9.75" sqft/pc: 0.64sqft Width: 9.5 Depth: 9.75
- 11 x 11 Van Gogh Abby Crackle Glass + Stone Mosaic
- Van Gogh Abby 11x11 (10 sheets/bx) (72 bx/plt) (0.84sf/pc)
- Type: Crackle Glass + Stone Mosaic
- Square-Feet Per Sheet: 0.8402 sqft
- Size of Unit: 11x11
- Width: 11 Depth: 11 Thickness: 3/8 inch
- Sold By: Sheet
Swimming Pool and Wet area Tiles
Color Stained glass tile mosaic
*** Price per Sheet (1.00 sq ft) ***
- Material: Glass
- Sheet Size: 12" x 12"
- Sq Ft Per Piece: 1.00
- Approximate Piece Size: 2" x 1"
- Thickness: 1/4"
- Colors: Silver Taupe
- Finish: Glossy
- Backing: Paper mount
- Brighten up your pool or shower with this series of Handmade Porcelain mosaics.
- Pool rated and acceptable for use on shower walls.
- Use for Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- CIRCULAR GLASS TILE SERIES - SNOW
- Glass mosaic made of varying sizes of circles in Glossy White glass
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: White
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Aphrodite Onyx - Mix of Green, White and Honey Onyx with Thassos marble in heart-shaped mosaic. (Previously named Aphrodite Spring)
- Suggested Grout Color: Bostik Trucolor White H152
- Dragon Scale Turquoise 9.5 x 9.5 - Turquoise Glass mosaic in dragon scale pattern.
- Suggested Grout Color: Bostik Dimension Diamond H600
- CollectionDragon Scale Glass
- TypeMosaics
- MaterialGlass
- Thickness3/8 in (8.00 mm)
- Weight2.40 Lbs
- Pool RatedPool Rated for use in Swimming Pools
- Country of OriginAsia
- LookScale
- FinishGlossy
- ColorBlue Green
- Marble and Glass in Pebble look - Ocean
- A blend of Thassos Marble with white glass in a Pebble layout style
- ** Price is per Sheet ***
- Material: Marble and Glass
- Sheet Size: 12" x 12" (1 sq ft per sheet)
- Thickness: 3/8"
- Colors: Blue White Grey
- Finish: Glossy
- Uses: Interior Dry Walls, Interior Floors (Residential), Shower Walls, Shower Floors (Residential)
- Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8"away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
- Maintenance and Care
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Diana Octagon Thassos 11.75x11.75 - White Thassos marble and white Pearl in octagon shape mosaic.
- Suggested Grout Color: Bostik Dimension Diamond H600
- Thickness: 8mm
- Fiberglass Mesh Backing for quick and easy installation
- Harmonious color result in unique pieces of art
- Suitable for kitchen / bathroom / wall and etc
- Chemical Resistant
- Fading and Discoloration Resistant
- Frost Resistant
- Mohs Hardness Scale - 6
- Resistant to Temperature Shock
*** Price per Sheet ***
Pearl mosaic with scale pieces
- Material: Pearl
- Sheet Size: 11.25" x 11 25"
- Thickness: 1/16 in (2.00 mm)
- Sq Ft Per Piece: 0.96
- Colors: Dark shade of Pearls
Can install the residential shower when sealed.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
Maintenance & Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- 45 sq ft/sheet Sold in sets of 4
- Made in the USA
- Because these mosaics are made-to-order, please allow for a two week production time.
- Number of pieces per order: 4
- Square feet per order: 1.8
- 45 sq ft/sheet Sold in sets of 4
- Made in the USA
- Because these mosaics are made-to-order, please allow for a two week production time.
- Number of pieces per order: 4
- Square feet per order: 1.8
- Number of Pieces in 1 Quantity: 1
- Total SQ FT in 1 Quantity: 0.96
- Scale Beach Newport Scale Beach 9.5 X 9.75 Mosaic
- 0.64 SqFt Each
- 20 Pieces Per Box
- 12.86 SqFt Per Box
- Product Sold By The Piece
- Suggested Grout Color: Bostik Trucolor White H152
- Type: mosaic
- Size: 9.5" x 9.75"
- Pc/sf/box: 20pc / 12.86sf
- Size: 9.5" x 9.75" sqft/pc: 0.64sqft Width: 9.5 Depth: 9.75
- Penny Marble Calacatta Polished 11 x 11.75 - Calacatta and Thassos Marble in penny shape pieces. Old name: Penny Calacatta Marble
- Suggested Grout Color: Bostik Trucolor White H152
- 45 sq ft/sheet Sold in sets of 4
- Made in the USA
- Because these mosaics are made-to-order, please allow for a two week production time.
- Number of pieces per order: 4
- Square feet per order: 1.8