- Product Description
- Product Specifications
- Shipping and Returns
DOT LP is arguably the world’s smallest architectural LED ultra-wide flood luminaire for panel-mount appli cations. For installation into panels of up to 18mm (0.7”) thickness of wood, metal, tile, hardie, or other.
Ideal for decorative and accent lighting.
Consisting of milled titanium, DOT LP is suitable for IP 67 installation in extreme environments such as marine, arctic, and desert conditions. Features a minuscule 9mm x 9mm (0.35” x 0.35”) aperture with tough PMMA lens that is optically superior to glass, for optimum 136º beam angle uniformity and efficient throw distance.
Because of its tiny size - with fixture dimensions of only 19mm x 19mm (0.75” x 0.75”) - DOT LP is virtually ‘all light and no fixture’, making it as appropriate for use in historic projects, as it is in modern design projects.
DOT LP features the best-selling MINIMIS patent-pending lens+LED module which is fully water resistant. Each module is tested - under power - in full water immersion and exposed to -17ºC before insertion in the DOT LP fixture housing, eliminating the need for gaskets that can crack and fail.
Installation is easy. Drill a clean 17mm Ø hole in any material of up to 18mm thickness. Feed pigtail through hole. On other side of panel, thread included neoprene washer and backing thumb-nut onto the threaded body of DOT LP, and lightly tighten into place. Connect to a 12vDC power source (available through MINIMIS) according to instructions an local and federal electrical codes.
Ideal for decorative and accent lighting.
Consisting of milled titanium, DOT LP is suitable for IP 67 installation in extreme environments such as marine, arctic, and desert conditions. Features a minuscule 9mm x 9mm (0.35” x 0.35”) aperture with tough PMMA lens that is optically superior to glass, for optimum 136º beam angle uniformity and efficient throw distance.
Because of its tiny size - with fixture dimensions of only 19mm x 19mm (0.75” x 0.75”) - DOT LP is virtually ‘all light and no fixture’, making it as appropriate for use in historic projects, as it is in modern design projects.
DOT LP features the best-selling MINIMIS patent-pending lens+LED module which is fully water resistant. Each module is tested - under power - in full water immersion and exposed to -17ºC before insertion in the DOT LP fixture housing, eliminating the need for gaskets that can crack and fail.
Installation is easy. Drill a clean 17mm Ø hole in any material of up to 18mm thickness. Feed pigtail through hole. On other side of panel, thread included neoprene washer and backing thumb-nut onto the threaded body of DOT LP, and lightly tighten into place. Connect to a 12vDC power source (available through MINIMIS) according to instructions an local and federal electrical codes.
Color temperatures available:
- Warm white (2800º to 3200º Kelvin)
- Pure white (5800º to 6300º Kelvin)
- IP67 fixture for wet areas indoor or outdoor.
- Retail: $100 USD
DOT LP
DOT LP is arguably the world’s smallest architectural LED ultra-wide flood luminaire for panel-mount appli cations. For installation into panels of up to 18mm (0.7”) thickness of wood, metal, tile, hardie, or other.
Ideal for decorative and accent lighting.
Consisting of milled titanium, DOT LP is suitable for IP 67 installation in extreme environments such as marine, arctic, and desert conditions. Features a minuscule 9mm x 9mm (0.35” x 0.35”) aperture with tough PMMA lens that is optically superior to glass, for optimum 136º beam angle uniformity and efficient throw distance.
Because of its tiny size - with fixture dimensions of only 19mm x 19mm (0.75” x 0.75”) - DOT LP is virtually ‘all light and no fixture’, making it as appropriate for use in historic projects, as it is in modern design projects.
DOT LP features the best-selling MINIMIS patent-pending lens+LED module which is fully water resistant. Each module is tested - under power - in full water immersion and exposed to -17ºC before insertion in the DOT LP fixture housing, eliminating the need for gaskets that can crack and fail.
Installation is easy. Drill a clean 17mm Ø hole in any material of up to 18mm thickness. Feed pigtail through hole. On other side of panel, thread included neoprene washer and backing thumb-nut onto the threaded body of DOT LP, and lightly tighten into place. Connect to a 12vDC power source (available through MINIMIS) according to instructions an local and federal electrical codes.
Ideal for decorative and accent lighting.
Consisting of milled titanium, DOT LP is suitable for IP 67 installation in extreme environments such as marine, arctic, and desert conditions. Features a minuscule 9mm x 9mm (0.35” x 0.35”) aperture with tough PMMA lens that is optically superior to glass, for optimum 136º beam angle uniformity and efficient throw distance.
Because of its tiny size - with fixture dimensions of only 19mm x 19mm (0.75” x 0.75”) - DOT LP is virtually ‘all light and no fixture’, making it as appropriate for use in historic projects, as it is in modern design projects.
DOT LP features the best-selling MINIMIS patent-pending lens+LED module which is fully water resistant. Each module is tested - under power - in full water immersion and exposed to -17ºC before insertion in the DOT LP fixture housing, eliminating the need for gaskets that can crack and fail.
Installation is easy. Drill a clean 17mm Ø hole in any material of up to 18mm thickness. Feed pigtail through hole. On other side of panel, thread included neoprene washer and backing thumb-nut onto the threaded body of DOT LP, and lightly tighten into place. Connect to a 12vDC power source (available through MINIMIS) according to instructions an local and federal electrical codes.
Color temperatures available:
- Warm white (2800º to 3200º Kelvin)
- Pure white (5800º to 6300º Kelvin)
- IP67 fixture for wet areas indoor or outdoor.
- Retail: $100 USD
- Product Description
- Product Specifications
- Shipping and Returns
DOT LP is arguably the world’s smallest architectural LED ultra-wide flood luminaire for panel-mount appli cations. For installation into panels of up to 18mm (0.7”) thickness of wood, metal, tile, hardie, or other.
Ideal for decorative and accent lighting.
Consisting of milled titanium, DOT LP is suitable for IP 67 installation in extreme environments such as marine, arctic, and desert conditions. Features a minuscule 9mm x 9mm (0.35” x 0.35”) aperture with tough PMMA lens that is optically superior to glass, for optimum 136º beam angle uniformity and efficient throw distance.
Because of its tiny size - with fixture dimensions of only 19mm x 19mm (0.75” x 0.75”) - DOT LP is virtually ‘all light and no fixture’, making it as appropriate for use in historic projects, as it is in modern design projects.
DOT LP features the best-selling MINIMIS patent-pending lens+LED module which is fully water resistant. Each module is tested - under power - in full water immersion and exposed to -17ºC before insertion in the DOT LP fixture housing, eliminating the need for gaskets that can crack and fail.
Installation is easy. Drill a clean 17mm Ø hole in any material of up to 18mm thickness. Feed pigtail through hole. On other side of panel, thread included neoprene washer and backing thumb-nut onto the threaded body of DOT LP, and lightly tighten into place. Connect to a 12vDC power source (available through MINIMIS) according to instructions an local and federal electrical codes.
Ideal for decorative and accent lighting.
Consisting of milled titanium, DOT LP is suitable for IP 67 installation in extreme environments such as marine, arctic, and desert conditions. Features a minuscule 9mm x 9mm (0.35” x 0.35”) aperture with tough PMMA lens that is optically superior to glass, for optimum 136º beam angle uniformity and efficient throw distance.
Because of its tiny size - with fixture dimensions of only 19mm x 19mm (0.75” x 0.75”) - DOT LP is virtually ‘all light and no fixture’, making it as appropriate for use in historic projects, as it is in modern design projects.
DOT LP features the best-selling MINIMIS patent-pending lens+LED module which is fully water resistant. Each module is tested - under power - in full water immersion and exposed to -17ºC before insertion in the DOT LP fixture housing, eliminating the need for gaskets that can crack and fail.
Installation is easy. Drill a clean 17mm Ø hole in any material of up to 18mm thickness. Feed pigtail through hole. On other side of panel, thread included neoprene washer and backing thumb-nut onto the threaded body of DOT LP, and lightly tighten into place. Connect to a 12vDC power source (available through MINIMIS) according to instructions an local and federal electrical codes.
Color temperatures available:
- Warm white (2800º to 3200º Kelvin)
- Pure white (5800º to 6300º Kelvin)
- IP67 fixture for wet areas indoor or outdoor.
- Retail: $100 USD
At Houzz we want you to shop for DOT LP with confidence. You can read real customer reviews for this or any other product and even ask questions and get answers from us or straight from the brand. When you buy DOT LP or any product product online from us, you become part of the Houzz family and can expect exceptional customer service every step of the way. If you have questions about or any other product for sale, our customer service team is eager to help.
Browse over 25 million home design photos on Houzz