I switched my lawn tractor over from 10W30 conventional oil to 10W30 full synthetic this year. The mower is about 5 years old. I cut a 1/2 acre lot about once a week.
I have noticed that it seems to be going through a little oil now, since I have needed to add an ounce or two periodically. It does not appear to be leaking anywhere so I am assuming that it is being burned. The oil I am using is: Pennzoil SAE 10W30 Full Synthetic meeting ILSAC GF-4, SM.
My manual says that synthetic works for more starting temperature ranges then conventional oil and requires oil to meet GF-2 SJ/CF or higher (not sure what all that means).
Any ideas on why I might be going through the extra oil all of a sudden. My tractor is a Craftsman 944.605160 16.5 Hp OHV with a Briggs & Stratton motor IC707 0230E1 031017ZE.
Appreciate your thoughts on this.
mownie
cranheim
Related Professionals
Palm Springs Landscape Architects & Landscape Designers · Americus Landscape Contractors · Desert Hot Springs Landscape Contractors · Firestone Landscape Contractors · Gainesville Landscape Contractors · Louisville Landscape Contractors · Morrisville Landscape Contractors · Muttontown Landscape Contractors · The Villages Landscape Contractors · Vallejo Landscape Contractors · Markham Landscape Contractors · Dayton Window Contractors · Farragut Window Contractors · Glendale Heights Window Contractors · Winnetka Window Contractorswalt2002
cranheim
rcmoser
optsyeagleOriginal Author
engine_tech
mbsl98
optsyeagleOriginal Author
broke_not