The Armor SX5000 is a high solids, Department of Transportation approved, solvent-based Silane-Siloxane water repellent and impregnating sealer for porous concrete and masonry surfaces. The Armor SX5000 will penetrate and chemically bond deep within the substrate to provide long lasting protection against deterioration or staining due to water absorption. The Armor SX5000 will not impair the natural breathing characteristics of treated substrates, nor will it produce a film or coating. The Armor SX5000 will help concrete and masonry surfaces to resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water. The Armor SX5000 will also help to reduce the formation of efflorescence and the growth of mold and mildew.

Uses: Unsealed poured concrete, broom finished concrete, trowel finished concrete, stamped concrete, exposed aggregate concrete, concrete pavers, brick pavers, pavers, clay tile, unglazed tile, cement, brick, stone, and other masonry.
Common Applications: driveway sealer, walkway and sidewalk sealer, patio and pool deck sealer, brick house and chimney sealer, clay tile roof sealer, garage floor sealer, warehouse floor sealer, basement wall and floor sealer, and other concrete and masonry applications.

Benefits:

• Contains up to 10X more active ingredients than similar products.
• Approved in several states by the Department of Transportation as a water repellent sealer.
• Will maintain the natural, unsealed look and feel of the substrate. Will never peel, flake or fade. UV resistant, non-yellowing. No surface film or coating to maintain.
• Resistant to freeze-thaw cycles and de-icing salts.
• Provides excellent resistance to mold, mildew, and fungus.
• Can be applied to interior/exterior, vertical/horizontal, above/below grade surfaces.
• Water and other liquids will bead off the surface of sealed concrete and masonry.
• Breathable, low VOC.

Coverage: 1 gallon covers up to 175-250 Square Feet in one coat, or up to 100 Square feet in 2 coats.

• "BrandInvenitiah Furnishings
• MaterialWood
• Size12x12 Inch
• Finish TypeOil Rubbed
• StyleModern
• Installation TypeInterlocking
• PatternSolid
• ShapeSquare
• Edge StyleSquare Edge

EASY ASSEMBLY: simply unbox the patio tiles, snap or clip it together into your desire space (outdoor pool, walkway, backyard, balcony, patio ) with your hands, NO SPECIAL TOOL NEEDED even over slightly rough surfaces; Simply revert the process, when you want to remove; Furthermore, every single angle of our Deck tiles is well polished, making sure it the most comfort with your finger
CUSTOMIZABLE & CONVENIENT: Our interlocking deck tiles are designed in a perfect size that can be easily customized to fit your space. Patio tiles outdoor interlocking all weather makes it a breeze to create a tailored flooring solution
BEST FIT FOR BOTH INDOOR & OUTDOOR FLOORING, MULITY PURPOSE USE: Invenitiah Furnishings Acacia wood tile remain its natural colors, bringing you a warm feels and perfect fit for both Outdoor and Indoor application like: outdoor pool tiles, balcony flooring; outdoor patio tiles flooring; portable dance floor for outdoor party; outdoor shower tiles; indoor shower mat, over grass outdoor flooring; outdoor party floor; over grass rollout walkway; over grass backyard flooring
WATERPROOF ALL WEATHER: solid acacia wood interlocking deck tiles, being Pre-oiled in combination with high density of plastic net construction, ensure our Deck Tile drain water quickly and can stand under any type of weather condition; We highly recommend you to give our decking tile a good clean with wood oil when season changes (summer/winter come) to enhance its durability

12 Slats Deck Tiles Design
Easy to customize to fit your space, better drainage ability, Keep your space dry, clean, and non-slippery. High density plastic base net provides our deck tile a heavy duty capability, durable under every use cases.

Box Of 9 Tiles, 9 Sq Ft
Each box contains 9 12 x 12 inches deck tiles, cover 9 square feet (1 yard) area. high recommend to use for a square space, and over solid or flat surface (concrete, patio, paver, poolside ).

Interlocking Tiles, Easy Snap
The deck tiles come with round interlocking loop and pegs, making it easy to set up, just snap together. While still stay firm and steady even under not flat surface (patio, garden..).

Waterproof, Non-Slip
Made from Vietnam Solid Acacia wood, Waterproof any kind of weather, perfect for outdoor flooring. The rough acacia wood surface also helps to avoid slippery."

When you are designing a driveway made of pavers, asphalt, or concrete and you want it heated, WarmlyYours has the snow melting solution for you. We all know how disappointing it is to watch the snow fall every winter, knowing that it's only a matter of time before we have to bundle up and head outside to shovel the walkways and salt the stairs. Instead, imagine relaxing by the fireplace in the comfort of your home on a snowy winter day. With WarmlyYours snow melting systems, you can do just that.

• Covers 60 Sq. Ft
• Specs: 12.5 Amps, 19.20 Ohms, 3000 Watts, 240 Volts
• For applications under asphalt, concrete and pavers

Is there an indoor or outdoor space around your home that you wish had more privacy? Our Tiaga Wood Slatted Freestanding Privacy Screen has you covered! The screen measures 73.5 in H x 36 in W making it perfect to partition off home living spaces such as patios, decks, backyards, pools, large rooms, and more! This screen can be freestanding or surface mounted. In order to surface mount this screen on concrete, you will have to purchase (4) 1/4" concrete wedge anchors that are 2 1/4” in length. To surface mount on wood, you will have to purchase (4) 1/4” lag screws that are 3” in length. Each Tiaga Wood Privacy Fence Screen Kit comes unassembled with 1 panel. Please allow approximately 30 minutes for assembly for one panel and 60 minutes to surface mount. This screen is made from premium 100% FSC certified wood. We are proud to offer products made from sustainably managed forest plantations. For staining, painting, and screen upkeep please reference our painting and staining guide. Should you run into any questions, our customer care team located in Charlotte, NC is here to help!

1 PANEL PURCHASE: You will receive 1 panel with your purchase. Purchase as many as necessary to beautify your space!
DIMENSIONS: Each screen measures 73.5 in H x 36 in W.
INSTALLATION VERSATILITY: Each screen can be assembled for a freestanding or surface mounted application; For wood: must purchase (4) 1/4” lag screws that are 3” in length; For concrete: must purchase (4) 1/4" concrete wedge anchors that are 2 1/4” in length
PATENTED DESIGN: Our patented design (U.S. Patent D1,011,052) and convertible foot bracket allow for an aesthetically pleasing screen that is also versatile in its application
MULTI-PURPOSE: Use the freestanding feet or surface mount your screen to partition off indoor or outdoor living spaces like a patio, backyard, balcony, outdoor porch, seating area, and more!
SMOOTH FINISH: Each purchase comes with smooth, finished slats making the DIY assembly safe and easy to handle.
LIGHTWEIGHT: The privacy screen only weighs 25 lbs. This allows for quick and easy assembly.
MOUNTING WARNING: Do not mount privacy screen to pavers, bricks, or asphalt. Surface mounting should only be done with concrete and wood surfaces.
DURABLE FEET: The screen’s wood feet come with a rubber pad to elevate the wood foot, with no ground contact the wood feet last longer without discoloration.
CHARMING NATURAL WOOD: Natural wood grain color variation meaning no two panels have the same grain, color, finish, or wood knots due to natural factors.
LIFE EXPECTANCY: Dependent on environment due to being made of natural wood.
DIY ASSEMBLY IS REQUIRED: This screen kit arrives unassembled and takes roughly 30 minutes to assemble and approximately 60 minutes to surface mount. Please refer to the manufacturer’s Install Guide for more information.
USA BASED: We’re proudly located in Charlotte, NC. For any questions or issues, give our customer care team a call. We’re more than willing to help.
MAINTAIN OPTIMAL COLOR: We recommend applying stain every 6 months to maintain ideal screen color.
ENVIRONMENTALLY FRIENDLY: Crafted from 100% FSC certified lumber. Treated with an environmentally safe water-based stain.
PAINT RECOMMENDATIONS: If you’d like to paint this product, it can be painted any color besides black, sanding the product prior to painting will yield the most even coating.
STAINING RECOMMENDATIONS: Transparent or semi-transparent exterior stains will maintain the natural wood look, while solid stains will cover more of the natural wood grain. If the product goes longer than recommended without staining, it will need to be sanded and may require a semi-solid or solid stain.
OPTIMIZE INITIAL STAIN: To increase the lifespan of the initial screen stain please prevent bushes or other greenery from directly contacting the wood boards.
APPEALING WATER BASED STAIN: Your screen will come with an initial water-based stain. This increases the lifespan of the screen and allows the wood grain to be featured.

You know that spot around your home that would be better if it had more privacy? The Sierra Louvered Privacy Screen is perfect for that! Louvered slats make this screen great for adding class and privacy to your space. This screen measures 73.5 in H x 37.625 in W making it ideal to partition off outdoor and indoor living spaces such as patios, decks, backyards, pools, large rooms and more! This screen is freestanding or can be surface mounted. In order to surface mount this screen on concrete, you will have to purchase (4) 1/4" concrete wedge anchors that are 2 1/4” in length. To surface mount on wood, you will have to purchase (4) 1/4” lag screws that are 3” in length. Each Sierra Wood Privacy Screen Kit comes unassembled with 1 panel. Please allow approximately 30 minutes for assembly of one panel and 60 minutes to surface mount. This screen is made from our premium 100% FSC certified wood. We are proud to offer products made from sustainably managed forest plantations. For staining, painting, and screen upkeep, we suggest staining this product every 6 months to maintain optimal color. If you choose to paint the screen, please refer to our staining and painting guide for more information. Should you run into any questions our customer care team located in Charlotte, NC is here to help!

1 PANEL PURCHASE: You will receive 1 panel with your purchase. Purchase as many as necessary to beautify your space!
VERSATILE INSTALLATION: Each screen can be assembled for a freestanding or surface mounted application; For wood: must purchase (4) 1/4” lag screws that are 3” in length; For concrete: must purchase (4) 1/4" concrete wedge anchors that are 2 1/4” in length
PATENTED DESIGN: Our patented design and convertible foot bracket allow for an aesthetically pleasing screen that is also versatile in its application
DIMENSIONS: Each screen measures 73.5 in H x 37.625 in W.
MULTI-PURPOSE: Use the freestanding feet or surface mount your screen to partition off living spaces like a patio, backyard, balcony, outdoor porch, seating area, large room and more!
SMOOTH FINISH: Each purchase comes with smooth, finished louvered slats making the DIY assembly safe and easy to handle.
UNIQUE DESIGN: The louvered design allows for additional privacy and elegance.
LIGHTWEIGHT: The privacy screen only weighs 30lbs. This allows for easier and quicker installation.
MOUNTING RECOMMENDATION: Do not mount privacy screen to pavers, bricks, or asphalt. Surface mounting should only be down with concrete and wood surfaces.
DURABLE FEET: The screen’s wood feet come with a rubber pad to elevate the wood foot; with no ground contact, the wood feet last longer without discoloration.
CHARMING NATURAL WOOD: Natural, wood grain color variation means no two panels have the same grain, color, finish, or wood knots due to natural factors.
LIFE EXPECTANCY: Dependent on environment due to being made of natural wood.
DIY ASSEMBLY IS REQUIRED: This screen kit arrives unassembled and takes roughly 30 minutes to assemble and approximately 60 minutes to surface mount. Please refer to the manufacturer’s Install Guide for more information.
USA BASED: We’re proudly located in Charlotte, NC. For any questions or issues, give our customer care team a call. We’re more than willing to help.
APPEALING WATER BASED STAIN: Your screen will come with an initial water-based stain. This increases the lifespan of the screen and allows the wood grain to be featured.
ENVIRONMENTALLY FRIENDLY: Crafted from 100% FSC certified lumber. Treated with an environmentally safe water-based stain.
OPTIMIZE INITIAL STAIN: To increase the lifespan of the initial screen stain please prevent bushes or other greenery from directly contacting the wood boards.
PAINT RECOMMENDATIONS: If you’d like to paint this product. It can be painted any color besides black, sanding the product prior to painting will yield the most even coating.
STAINING RECOMMENDATIONS: Transparent or semi-transparent exterior stains will maintain the natural wood look, while solid stains will cover more of the natural wood grain. If the product goes longer than recommended without staining, it will need to be sanded and may require a semi-solid or solid stain.
MAINTAIN OPTIMAL COLOR: We recommend applying stain every 6 months to maintain ideal screen color.

Concrete Sealer X-3 is a water based special blend of polysiloxanes/silanes which crosslink below the surface of the concrete making the concrete surface water and stain repellent allowing spills to be removed more easily. This sealer can either be applied alone or on top of Concrete Sealer X-1 or Concrete Sealer X-2 to provide double protection of the concrete with both deep sealing and a repellent finish. Concrete Sealer X-3 is also available in custom colors.
Concrete Sealer X-3 can be applied on all types of decorative and stained concrete pavers, concrete aggregate driveways and concrete walkways, bricks, clay tiles, mortar, grout and any natural stones. It can be used on above grade plaster and stucco providing a breathable barrier against water, stains and acids and will seal hair line cracks. The sealer can also be used to seal swimming pools and fish ponds to prevent water escaping through the concrete capillaries and pores. It can also be used in dog kennels and agricultural institutions to provide stain resistance which assists in the maintenance of these enclosures.
This concrete sealer leaves a natural finish (no sheen) after application and the surface will not be slippery.
Concrete Sealer X-3Concrete Sealer X-3 has also been proven as an effective anti-graffitti barrier helping to prevent paints, aerosols and crayons from adhering to the wall and allowing easy removal if they do.
Concrete Sealer X-3 is a ready to use sealer and does not require the addition of an activator which means that it does not have a limited pot life unlike some competitive sealers and it has a shelf life of at least 6 months.
Concrete Sealer X-3 is easy to apply using a brush, medium nap roller or low pressure sprayer at any temperature between 40-80°F.
The surface to be treated does not need any special treatment but it must be water, oil and dust free to allow proper penetration of the sealer. Check the surface of your concrete before applying this sealer to make sure it absorbs drops of water within 20-30 seconds, If it beads up then use Eco Concrete Etcher prior to applying this sealer. Coverage rate is approximately 200 to 400 sf/gal/app depending on the concrete porosity and two coats are recommended rather than one thick coat. Application time between coats is 30 minutes maximum and allow to cure for 24 to 48 hours without rain.

When you are designing a driveway made of pavers, asphalt, or concrete and you want it heated, WarmlyYours has the snow melting solution for you. We all know how disappointing it is to watch the snow fall every winter, knowing that it's only a matter of time before we have to bundle up and head outside to shovel the walkways and salt the stairs. Instead, imagine relaxing by the fireplace in the comfort of your home on a snowy winter day. With WarmlyYours snow melting systems, you can do just that.

• Covers 10.75 Sq. Ft at 3" Spacing (recommended)
• Specs: 4.17 Amps, 28.78 Ohms, 500 Watts, 120 Volts
• For applications under asphalt, concrete and pavers

An industrial-grade, water-based, breathable, acrylic sealer that enhances, protects, and provides a clear, low-sheen finish. Cryli-Tek 5500 is the industry’s highest performing decorative sealer. This unique formula leaves the surface with a clear, low sheen, non-yellowing, satin finish. This product has an extremely fast set time and unsurpassed stain resistance. The treated surfaces will resist chipping, flaking, delamination and breakdown with UV light exposure.

APPLICATIONS

Exceptional when used for:

• Substrates: Concrete, stamped concrete, pavers, exposed aggregate, stone
• Applications: Patios, pool decks, driveways, walkways

• BENEFITS
• Easy to clean surface
• Enhanced surface appearance
• Durable satin finish
• Easy to apply
• Low VOC’s
• Reduces dirt pick up
• Prevents mold/mildew growth
• Prevents water ingress
• Resists weathering
• Resists carbonation, weak acids and alkaline solutions
• Wind erosion and general exposure resistant
• Resists UV degradation

• PREPARATION

Avoid contact with skin, eyes and clothing. Wash hands after use and do not take internally. Please refer to the product Safety Data Sheet (SDS) before using. The preparation process should be followed to ensure adequate penetration and optimum performance:
Step 1: The concrete substrate must be structurally sound, thoroughly dry and clean. Wait at least 24-48 hours after rain and/or pressure washing before sealing; concrete should be visibly dry.

• Step 2: Remove all paints, previous sealers and/or adhesives before application.

Step 3: The substrate must be clean of oil, grease, dirt, wax, curing compounds, efflorescence and other contaminants that might interfere with the penetration of the sealer.
Step 4: If acid is used to clean the concrete, neutralize the surface completely and rinse it with water prior to application. Then wait for the concrete to dry out for at least 24-48 hours.

• Step 5: The surface-zone moisture content of the concrete should not exceed 4%wt.
• Step 6: Cover all surrounding areas not intended to be coated.
• Step 7: New concrete must be cured for at least 28 days before sealing.

• APPLICATION
• Step 1: Cryli-Tek® 5500 is ready to use right out of the container. Stir extremely well before use.
• Step 2: Pour the Cryli-Tek® 5500 into a paint tray or bucket. Dip a good quality 3/8" nap roller into the tray or bucket.

Step 3: Roll one coat onto the application area in a thin and uniform manner. Too thick of an application will result in entrapment and subsequent product failure.

• Step 4: Roll out any puddles until the sealer penetrates the substrate.

Step 5: If an additional coat is desired wait at least 4 hours and ensure the first coat has completely dried before applying a second coat. Press on the Cryli-Tek® 5500 with your thumb to verify that no fingerprint impression is left. If no impression is created, then the recoat can be started. Always remember that colder temperatures will require more cure time for the product before recoating can commence. We do not recommend any coatings be placed over this product except multiple coats of this product itself.
Step 6: When the entire application has been treated, let the concrete dry for at least six (6) hours before walking, 24 hours before driving, and protect the concrete from rain for at least 24-48 hours after sealing.

• Step 7: Clean up: Application tools can be cleaned using soap and water.
• Step 8: Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

APPLICATION NOTES:

• Before application test the sealer by applying in an inconspicuous area to ensure the desired coverage and appearance is achieved.
• Do not apply to damp or wet concrete.
• Do not apply too thick of an application.
• Do not use in immersion service or constant chemical exposure areas.
• Extremely porous substrates such as pavers may require additional coats to achieve a slight enhancement.

• TECHNICAL SPECS
• Feature: Decorative sealer
• Chemistry: Acrylic
• Color: Clear
• Finish: Satin, low sheen
• Category: Coating
• Carrier: Water
• Availability: Ready to use
• Packaging: 1 Gallon
• Coverage: 250 sq. ft. per gallon
• Interior/Exterior: Interior/Exterior
• Application Method: Roller
• Application Temperature: 45 F - 90 F
• Number of Coats: 1
• Drying Time (dry to touch): 3-5 Hours
• Drying time (full cure): 24 Hours
• Time before/after rain: 48 Hours
• New Concrete: Yes, at least 28 days after being poured
• Storage/Shelf Life: 1 Year
• Clean up: Soap/water
• Paintable: No
• VOC Content: 80 g/L

This unique fire pit features a robust steel and mesh fire bowl with an attractive natural slate top. The voluminous fire bowl allows for a larger fire while the mesh design ensures a beautiful viewing experience from any angle. This fire pit comes complete with a one-piece mesh spark screen with high-temperature paint. Also included is a screen lift tool and cooking grate.

Features:

• Natural slate top
• 24" diameter x 15.5" deep fire bowl
• Black powder coated finish
• One-piece mesh spark screen with high temperature paint
• Screen lift tool and cooking grate included

Assembled Dimensions: 30" dia. x 32.25"H; Weight: 42 lbs

Carton Dimensions: 32"L x 32"W x 16"H; Weight: 55 lbs
WARNING: The combustion of wood, charcoal, and other fuels can expose you to chemicals including soot, which is known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CAUTION: It is not recommended to use this fire pit on a wooden or other combustible surface or any surface that is not entirely resistant to high heat. However, if you intend to use this item on a wooden deck other combustible surface or any surface that is not entirely resistant to high heat, you must use a non-flammable and heat resistant material such as concrete pavers, brick or stone between the fire pit and the surface.
62240_FS_Manual_2020|Alpina Round Slate Top Fire Pit

An industrial-grade, water-based, silane/siloxane engineered to reduce water and moisture intrusion, while protecting concrete or masonry substrates from chlorides and deicing salts. Siloxa-Tek 8500 is our favorite product to treat nearly any application. A proprietary blend of silane/siloxanes, this clear penetrating sealer not only prevents deicing salt and freeze-thaw damage, but its hydrophobic nature resists moisture intrusion and vapor transmission. This is the go to choice to seal any concrete, brick, or masonry based substrate especially driveways, basements, patios and garages.

APPLICATIONS

Exceptional when used for:

• Applications: Driveways/sidewalks, patios, pool decks, garages, chimneys, roof tiles
• Substrates: Concrete, concrete blocks/cinderblocks, brick, pavers, exposed aggregate, stucco, stone, slate, sandstone

• BENEFITS
• Water beading effect
• Excellent penetration
• Breathable substrate
• Easy application
• Tack free finish
• No appearance change
• Low VOCs
• DOT approved
• Prevents deicing salt/chloride damage
• Prevents Freeze-thaw damage
• Protects from spalling/pitting/cracking
• Resists mold/mildew growth
• Prevents efflorescence
• Reduces dirt pick up
• Resists water vapor transmission
• Resists ASR/Alkali attacks
• Reduces Water ingress
• Reduces Moisture intrusion
• Resists UV radiation

DESCRIPTION

• Siloxa-Tek® 8500 is an advanced, high performance, industrial strength water based concrete/masonry water repellent solution designed to reduce water and moisture intrusion. Approved by the Department of Transportation to protect a wide variety of mineral substrates including architectural concrete, concrete block, split face block, pavers, stucco, porous and dense brick, clay tile, exposed aggregate concrete, sandstone, and slate this unique formula incorporates leading molecular nanotechnology; putting an end to water and moisture migration through any porous cementitious substrate. Siloxa-Tek® 8500 is a uniquely transparent, blended formula with added enzymes and surfactants that aide in accelerating a penetrating disbursement. Thus eliciting a more effective, uniformed reaction between the formula and the concrete / masonry substrate it’s being applied to. Siloxa-Tek® 8500 provides a hydrophobic barrier beneath the surface and seals out moisture while remaining highly vapor permeable and chemically bonding with the substrate. The treated surfaces will show no change in visual appearance from application and the surface that will not chip, flake, delaminate or breakdown with UV light exposure.
• Available in a ready to use gallon or an industry first ultra-concentrated gallon where 1 gallon of Siloxa-Tek 8500 mixes with 4 gallons of water to make 5 gallons of sealer that will treat up to 1250 sq. ft. of concrete per coat.

HOW IT WORKS
A water repellent impregnating sealer is a surface applied, invisible, non-film forming protection system, that can very effectively increase the durability of concrete. Due to the small size of the mono-molecular layer, there is little or no change in its aesthetic appearance. Compared to film forming coating systems, the surface applied water repellent impregnating sealer penetrates the surface pores and capillaries, so they are internally lined but not filled. Water repellent impregnating sealers change the surface tension of mineral substrates that produce a water repellent surface to keep water and aggressive water-soluble salts, such as chlorides and sulfates, out.
In structures on and below grade water should generally be kept out and away to prevent damage. The most pervasive form of concrete damage is surface scaling from freeze-thaw. Other forms of damage include alkali-silica reaction (ASR), chemical intrusion and corrosion of steel reinforcements. Siloxa-Tek® 8500 can block up to 99% of surface moisture. The active ingredients seal the pores within the substrate adequately blocking surface moisture while still maintaining the concretes ability to breathe. It will not significantly modify substrate appearance or traction and will only wear away if the concrete surface itself wears away.
New or existing concrete can be treated and performance can be improved in as little as two applications. Siloxa-Tek® 8500 is a small investment that leads to long-term savings and improved performance.

• PREPARATION

Avoid contact with skin, eyes and clothing. Wash hands after use and do not take internally. Please refer to the product Safety Data Sheet (SDS) before using. The preparation process should be followed to ensure adequate penetration and optimum performance:
Step 1: The concrete substrate must be structurally sound, thoroughly dry and clean. Wait at least 24-48 hours after rain and/or pressure washing before sealing; concrete should be visibly dry.

• Step 2: Remove all paints, previous sealers and/or adhesives before application.

Step 3: The substrate must be clean of oil, grease, dirt, wax, curing compounds, efflorescence and other contaminants that might interfere with the penetration of the sealer.
Step 4: If acid is used to clean the concrete, neutralize the surface completely and rinse it with water prior to application. Then wait for the concrete to dry out for at least 24-48 hours.

• Step 5: The surface-zone moisture content of the concrete should not exceed 4%wt.
• Step 6: Cover all surrounding areas not intended to be coated.
• Step 7: New concrete must be cured for at least 28 days before sealing.

• APPLICATION – READY TO USE
• Step 1: Siloxa-Tek® 8500 Ready to Use is ready to use right out of the container. Stir extremely well before use.

Step 2: If spray applying, pour the Siloxa-Tek® 8500 Ready to Use into a sprayer. If roll applying, pour the Siloxa-Tek® 8500 Ready to Use into a paint tray or bucket and dip a 3/8" nap roller into the tray or bucket.

• Step 3: Spray or roll one coat onto an area of approximately 100 square feet.

Step 4: Immediately apply a second coat to the same 100 square foot area, while the first coat is still wet. You may walk on the first coat to apply the second coat. Apply until the surface is saturated but not to the point of puddling. (Since the Siloxa-Tek® 8500 Ready to Use is a hydrophobic product if you try to apply a second coat after the first coat has dried, the first coat may try to repel the second coat).

• Step 5: Roll or broom out any puddles until the sealer penetrates the substrate.

Step 6: After the first area has been treated move on to the next 100 square foot section and apply two (2) coats following the wet-on-wet application method.
Step 7: When the entire application has been treated with two (2) coats, let the concrete dry for at least six (6) hours before walking, 24 hours before driving, and protect the concrete from rain for at least 24-48 hours after sealing.

• Step 8: Clean up: Application tools can be cleaned using soap and water.
• Step 9: If over-spray occurs it should be cleaned and removed immediately after sealing.
• Step 10: Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

APPLICATION NOTES:

• Before application test the sealer by applying in an inconspicuous area to ensure the desired coverage and appearance is achieved.
• Do not over apply.
• Prevent from getting on glazed and finished surfaces such as glass, aluminum etc. In case of contact flush immediately with water.
• Does not prevent equipment leaks or other leaks such as oil, hydraulic fluid etc. Use the Siloxa-Tek® 8505 or Siloxa-Tek® 8510 for oil repellency and staining resistance.
• Do not use on concrete that has been previously sealed without chemically etching or mechanically scarifying.
• Water repellency may take up to seven (7) days to develop.

• TECHNICAL SPECS
• Feature: Water & salt repellent
• Chemistry: Silane/Siloxane
• Color: Clear
• Finish: Invisible
• Category: Penetrating
• Carrier: Water
• Availability: Ready to Use or Ultra Concentrate: Makes 5 Gallons
• Packaging: 1 Gallon Ready to Use
• Coverage: Ready to Use: 250 sq. ft. per coat
• Interior/Exterior: Interior/Exterior
• Application Method: Sprayer, Roller
• Application Temperature: 45 F - 90 F
• Number of Coats: 2
• Time Between Coats: 5 Minutes
• Drying Time (dry to touch): 6 Hours
• Drying time (full cure): 24 Hours
• Time before/after rain: 48 Hours
• New Concrete: Yes, at least 28 days after being poured
• Storage/Shelf Life: 1 Year
• Clean up: Soap/water
• Paintable: Yes, oil or enamel based paint; first test for compatibility
• VOC Content: 90 g/L

• "BrandInvenitiah Furnishings
• MaterialWood
• Size12x12 Inch
• Finish TypeOil Rubbed
• StyleModern
• Installation TypeInterlocking
• PatternSolid
• ShapeSquare
• Edge StyleSquare Edge

EASY ASSEMBLY: simply unbox the patio tiles, snap or clip it together into your desire space (outdoor pool, walkway, backyard, balcony, patio ) with your hands, NO SPECIAL TOOL NEEDED even over slightly rough surfaces; Simply revert the process, when you want to remove; Furthermore, every single angle of our Deck tiles is well polished, making sure it the most comfort with your finger
CUSTOMIZABLE & CONVENIENT: Our interlocking deck tiles are designed in a perfect size that can be easily customized to fit your space. Patio tiles outdoor interlocking all weather makes it a breeze to create a tailored flooring solution
BEST FIT FOR BOTH INDOOR & OUTDOOR FLOORING, MULITY PURPOSE USE: Invenitiah Furnishings Acacia wood tile remain its natural colors, bringing you a warm feels and perfect fit for both Outdoor and Indoor application like: outdoor pool tiles, balcony flooring; outdoor patio tiles flooring; portable dance floor for outdoor party; outdoor shower tiles; indoor shower mat, over grass outdoor flooring; outdoor party floor; over grass rollout walkway; over grass backyard flooring
WATERPROOF ALL WEATHER: solid acacia wood interlocking deck tiles, being Pre-oiled in combination with high density of plastic net construction, ensure our Deck Tile drain water quickly and can stand under any type of weather condition; We highly recommend you to give our decking tile a good clean with wood oil when season changes (summer/winter come) to enhance its durability

12 Slats Deck Tiles Design
Easy to customize to fit your space, better drainage ability, Keep your space dry, clean, and non-slippery. High density plastic base net provides our deck tile a heavy duty capability, durable under every use cases.

Box Of 9 Tiles, 9 Sq Ft
Each box contains 9 12 x 12 inches deck tiles, cover 9 square feet (1 yard) area. high recommend to use for a square space, and over solid or flat surface (concrete, patio, paver, poolside ).

Interlocking Tiles, Easy Snap
The deck tiles come with round interlocking loop and pegs, making it easy to set up, just snap together. While still stay firm and steady even under not flat surface (patio, garden..).

Waterproof, Non-Slip
Made from Vietnam Solid Acacia wood, Waterproof any kind of weather, perfect for outdoor flooring. The rough acacia wood surface also helps to avoid slippery."

This unique fire pit features a stamped stone-motif metal rim top and a mission-style base all in a hand-applied brushed-bronze finish. This fire pit comes complete with mesh dome spark screen with high heat paint and a wood grate. Also included is a screen lift tool.

• 22.5" black steel fire box with 4" bowl depth
• Brushed bronze paver-design rim
• Decorative mission-style base
• One-piece dome spark screen with high temperature paint
• Screen lift tool and wood grate included
• Simple assembly required

CAUTION: It is not recommended to use this fire pit on a wooden or other combustible surface or any surface that is not entirely resistant to high heat. However, if you intend to use this item on a wooden deck other combustible surface or any surface that is not entirely resistant to high heat, you must use a non-flammable and heat resistant material such as concrete pavers, brick or stone between the fire pit and the surface.

• Assembled Dimensions: 31.75"L, 31.75"W, 13.75"H (20.75"H including screen); Weight: 22.5 lbs
• Fire bowl: 22.5" x 22.5" exterior; 21" x 21" x 4" depth interior
• Carton Dimensions: 28.5"L, 24.5"W, 8"H; Weight: 22.5 lbs

This unique fire pit features a 27.5" antique bronze painted steel fire bowl with an attractive weave pattern, and elegant copper finish outer rails. This fire pit comes complete with mesh fire screen with high heat paint, and powder coated legs. Also included is a screen lift tool.

Features:

• 27.5" antique bronze steel fire bowl with weave pattern
• Copper finish outer rails
• One piece mesh fire screen with high temperature paint
• Screen lift tool included
• Assembled Dimensions: 37.4" Dia. x 21.28" H, Weight: 37 lbs
• Carton Dimensions: 31" L x 30" W x 12" H, Weight: 40 lbs
• WARNING: The combustion of wood, charcoal, and other fuels can expose you to chemicals including soot, which is known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• CAUTION: It is not recommended to use this fire pit on a wooden or other combustible surface or any surface that is not entirely resistant to high heat. However, if you intend to use this item on a wooden deck other combustible surface or any surface that is not entirely resistant to high heat, you must use a non-flammable and heat resistant material such as concrete pavers, brick or stone between the fire pit and the surface.

The attractive Tokia Fire Pit has a 30" high temp painted steel fire bowl in lightly-bronzed black, featuring an elegantly rounded lip and curved legs. This fire pit comes complete with mesh fire screen, a wood grate, and a screen lift tool.

Features:

• 30" high temperature black finish steel fire bowl
• Mesh spark screen with high-temperature paint
• Screen-lift tool and wood grate included
• Assembled Dimensions: 30" dia., 18"H; Weight: 15 lbs

Carton Dimensions: 32"L, 32"W, 7"H; Weight: 20 lbs
WARNING: The combustion of wood, charcoal, and other fuels can expose you to chemicals including soot, which is known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CAUTION: It is not recommended to use this fire pit on a wooden or other combustible surface or any surface that is not entirely resistant to high heat. However, if you intend to use this item on a wooden deck other combustible surface or any surface that is not entirely resistant to high heat, you must use a non-flammable and heat resistant material such as concrete pavers, brick or stone between the fire pit and the surface.

• We strive to realize your dream home design with this Cement Gray Riscado wall tiles.

If you are looking for incorporate impression of landscape straight paths and the contemporary pattern, this breathtaking concrete wall tiles will be well-suited for your interior and exterior home design.

• Made quality in mind, this unique shaped gray concrete wall tiles will serve you as long as you wish them to

PRODUCT FEATURES:

• Cement Tile with a Concrete Coating
• Interior and Exterior Usage
• Freeze & Thaw Resistant, Thermal Shock Resistant
• Number of Pieces Per Box- 8 Units
• Dimensions- W 19.7" x L 1" x H 5.9"

This unique fire pit features a robust 26" x 26" steel and mesh fire bowl with an attractive antique bronze finish and elegant patterned design. The voluminous fire bowl allows for a larger fire while the mesh design ensures a beautiful viewing experience from any angle. This fire pit comes complete with a one-piece mesh spark screen with high-temperature paint. Also included is a screen lift tool and cooking grate.

Features:

• 26" high temperature antique bronze finish steel
• Fire bowl
• One-piece mesh spark screen with high
• Temperature paint
• Screen lift tool and cooking grate included

Assembled Dimensions: 26”L x 26”W x 26"H; Weight: 28 lbs

Carton Dimensions: 28"L, 28"W, 19"H; Weight: 36 lbs

WARNING: The combustion of wood, charcoal, and other fuels can expose you to chemicals including soot, which is known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CAUTION: It is not recommended to use this fire pit on a wooden or other combustible surface or any surface that is not entirely resistant to high heat. However, if you intend to use this item on a wooden deck other combustible surface or any surface that is not entirely resistant to high heat, you must use a non-flammable and heat resistant material such as concrete pavers, brick or stone between the fire pit and the surface.

• The Cement Wall Tile Wave Collection is a great way to underline your home decor with a contemporary aesthetic touch.

Finished with a wavy black texture that adds more depth, this tile is made from durable and high quality cement material, suitable for commercial and residential space use.

• This bold textured wall tile is resistant to freeze, thaw and thermal shock, which makes it perfect for any interior or exterior design.

PRODUCT FEATURES:

• Cement Tile with a Concrete Coating
• Interior and Exterior Usage
• Freeze & Thaw Resistant, Thermal Shock Resistant
• Number of Pieces Per Box- 12 Units
• Dimensions- W 7.9" x L 0.6"-1.2" x H 7.9"

This unique fire pit features a 23" black steel fire box with a stone-look rim top and a decorative mission-style base. This fire pit comes complete with mesh dome spark screen with high heat paint and a wood grate. Also included is a screen lift tool.

• 23" black steel fire box with 4.25" bowl depth
• Stone look tile rim
• Decorative mission style black base
• One-piece dome spark screen with high temperature paint
• Screen lift tool and wood grate included

CAUTION: It is not recommended to use this fire pit on a wooden or other combustible surface or any surface that is not entirely resistant to high heat. However, if you intend to use this item on a wooden deck other combustible surface or any surface that is not entirely resistant to high heat, you must use a non-flammable and heat resistant material such as concrete pavers, brick or stone between the fire pit and the surface.

• Assembled Dimensions: 32"L, 32"W, 18"H; Weight: 30 lbs
• Fire bowl: 22.75" x 22.75" exterior; 21.5" x 21.5" x 4.25" depth - interior

Carton Dimensions: 37"L, 37"W, 7"H; Weight: 34 lbs

• "BrandInvenitiah Furnishings
• MaterialWood
• Size12x12 Inch
• Finish TypeOil Rubbed
• StyleModern
• Installation TypeInterlocking
• PatternSolid
• ShapeSquare
• Edge StyleSquare Edge

EASY ASSEMBLY: simply unbox the patio tiles, snap or clip it together into your desire space (outdoor pool, walkway, backyard, balcony, patio ) with your hands, NO SPECIAL TOOL NEEDED even over slightly rough surfaces; Simply revert the process, when you want to remove; Furthermore, every single angle of our Deck tiles is well polished, making sure it the most comfort with your finger
CUSTOMIZABLE & CONVENIENT: Our interlocking deck tiles are designed in a perfect size that can be easily customized to fit your space. Patio tiles outdoor interlocking all weather makes it a breeze to create a tailored flooring solution
BEST FIT FOR BOTH INDOOR & OUTDOOR FLOORING, MULITY PURPOSE USE: Invenitiah Furnishings Acacia wood tile remain its natural colors, bringing you a warm feels and perfect fit for both Outdoor and Indoor application like: outdoor pool tiles, balcony flooring; outdoor patio tiles flooring; portable dance floor for outdoor party; outdoor shower tiles; indoor shower mat, over grass outdoor flooring; outdoor party floor; over grass rollout walkway; over grass backyard flooring
WATERPROOF ALL WEATHER: solid acacia wood interlocking deck tiles, being Pre-oiled in combination with high density of plastic net construction, ensure our Deck Tile drain water quickly and can stand under any type of weather condition; We highly recommend you to give our decking tile a good clean with wood oil when season changes (summer/winter come) to enhance its durability

12 Slats Deck Tiles Design
Easy to customize to fit your space, better drainage ability, Keep your space dry, clean, and non-slippery. High density plastic base net provides our deck tile a heavy duty capability, durable under every use cases.

Box Of 9 Tiles, 9 Sq Ft
Each box contains 9 12 x 12 inches deck tiles, cover 9 square feet (1 yard) area. high recommend to use for a square space, and over solid or flat surface (concrete, patio, paver, poolside ).

Interlocking Tiles, Easy Snap
The deck tiles come with round interlocking loop and pegs, making it easy to set up, just snap together. While still stay firm and steady even under not flat surface (patio, garden..).

Waterproof, Non-Slip
Made from Vietnam Solid Acacia wood, Waterproof any kind of weather, perfect for outdoor flooring. The rough acacia wood surface also helps to avoid slippery."

Soreno Taupe features soft beige and light brown tones with a subtle pattern for a look reminiscent of natural stone. This large format pavers comes with neutral tones of the surfaces complement any architectural style and color palette. Extend the beauty of your interior space to the outdoors by using Soreno Taupe. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.

This electric snow melting kit includes a cable that provides 21.2 square feet of coverage with 3 spacing between runs of cable. This heating system removes snow and ice in the areas where you need it most without causing damage to decorative surfaces or landscaping. This kit is perfect for embedding (in concrete or in mortar under pavers) in a new walkway, set of outdoor stairs, or a uniquely shaped patio. The kit also includes an NEC-required plaque to mark the location of buried electrical elements.

The WiFi-enabled control with this kit allows for a variety of ways to operate your snow melting system. It can be used like a traditional on/off switch or you can operate it remotely with your smart device. The control is compatible with Amazon Alexa, Google Assistant, SmartThings, Nest, and Ring. Additionally, it can be tied to an If This Then That (IFTTT) account and the IFTTT weather app can allow the control to turn the system on based on real-time weather events.

• Covers 21.2 Sq. Ft at 3" Spacing (recommended)
• Specs: 8.33 Amps, 14.41 Ohms, 1000 Watts, 120 Volts
• For applications under asphalt, concrete and pavers

• "BrandInvenitiah Furnishings
• MaterialWood
• Size12x12 Inch
• Finish TypeOil Rubbed
• StyleModern
• Installation TypeInterlocking
• PatternSolid
• ShapeSquare
• Edge StyleSquare Edge

EASY ASSEMBLY: simply unbox the patio tiles, snap or clip it together into your desire space (outdoor pool, walkway, backyard, balcony, patio ) with your hands, NO SPECIAL TOOL NEEDED even over slightly rough surfaces; Simply revert the process, when you want to remove; Furthermore, every single angle of our Deck tiles is well polished, making sure it the most comfort with your finger
CUSTOMIZABLE & CONVENIENT: Our interlocking deck tiles are designed in a perfect size that can be easily customized to fit your space. Patio tiles outdoor interlocking all weather makes it a breeze to create a tailored flooring solution
BEST FIT FOR BOTH INDOOR & OUTDOOR FLOORING, MULITY PURPOSE USE: Invenitiah Furnishings Acacia wood tile remain its natural colors, bringing you a warm feels and perfect fit for both Outdoor and Indoor application like: outdoor pool tiles, balcony flooring; outdoor patio tiles flooring; portable dance floor for outdoor party; outdoor shower tiles; indoor shower mat, over grass outdoor flooring; outdoor party floor; over grass rollout walkway; over grass backyard flooring
WATERPROOF ALL WEATHER: solid acacia wood interlocking deck tiles, being Pre-oiled in combination with high density of plastic net construction, ensure our Deck Tile drain water quickly and can stand under any type of weather condition; We highly recommend you to give our decking tile a good clean with wood oil when season changes (summer/winter come) to enhance its durability

12 Slats Deck Tiles Design
Easy to customize to fit your space, better drainage ability, Keep your space dry, clean, and non-slippery. High density plastic base net provides our deck tile a heavy duty capability, durable under every use cases.

Box Of 9 Tiles, 9 Sq Ft
Each box contains 9 12 x 12 inches deck tiles, cover 9 square feet (1 yard) area. high recommend to use for a square space, and over solid or flat surface (concrete, patio, paver, poolside ).

Interlocking Tiles, Easy Snap
The deck tiles come with round interlocking loop and pegs, making it easy to set up, just snap together. While still stay firm and steady even under not flat surface (patio, garden..).

Waterproof, Non-Slip
Made from Vietnam Solid Acacia wood, Waterproof any kind of weather, perfect for outdoor flooring. The rough acacia wood surface also helps to avoid slippery."

• "BrandInvenitiah Furnishings
• MaterialWood
• Size12x12 Inch
• Finish TypeOil Rubbed
• StyleModern
• Installation TypeInterlocking
• PatternSolid
• ShapeSquare
• Edge StyleSquare Edge

EASY ASSEMBLY: simply unbox the patio tiles, snap or clip it together into your desire space (outdoor pool, walkway, backyard, balcony, patio ) with your hands, NO SPECIAL TOOL NEEDED even over slightly rough surfaces; Simply revert the process, when you want to remove; Furthermore, every single angle of our Deck tiles is well polished, making sure it the most comfort with your finger
CUSTOMIZABLE & CONVENIENT: Our interlocking deck tiles are designed in a perfect size that can be easily customized to fit your space. Patio tiles outdoor interlocking all weather makes it a breeze to create a tailored flooring solution
BEST FIT FOR BOTH INDOOR & OUTDOOR FLOORING, MULITY PURPOSE USE: Invenitiah Furnishings Acacia wood tile remain its natural colors, bringing you a warm feels and perfect fit for both Outdoor and Indoor application like: outdoor pool tiles, balcony flooring; outdoor patio tiles flooring; portable dance floor for outdoor party; outdoor shower tiles; indoor shower mat, over grass outdoor flooring; outdoor party floor; over grass rollout walkway; over grass backyard flooring
WATERPROOF ALL WEATHER: solid acacia wood interlocking deck tiles, being Pre-oiled in combination with high density of plastic net construction, ensure our Deck Tile drain water quickly and can stand under any type of weather condition; We highly recommend you to give our decking tile a good clean with wood oil when season changes (summer/winter come) to enhance its durability

12 Slats Deck Tiles Design
Easy to customize to fit your space, better drainage ability, Keep your space dry, clean, and non-slippery. High density plastic base net provides our deck tile a heavy duty capability, durable under every use cases.

Box Of 9 Tiles, 9 Sq Ft
Each box contains 9 12 x 12 inches deck tiles, cover 9 square feet (1 yard) area. high recommend to use for a square space, and over solid or flat surface (concrete, patio, paver, poolside ).

Interlocking Tiles, Easy Snap
The deck tiles come with round interlocking loop and pegs, making it easy to set up, just snap together. While still stay firm and steady even under not flat surface (patio, garden..).

Waterproof, Non-Slip
Made from Vietnam Solid Acacia wood, Waterproof any kind of weather, perfect for outdoor flooring. The rough acacia wood surface also helps to avoid slippery."

This is our Hanging Offset Umbrella, sun tent, rain shelter, and more all in one, the parasol gives you instant portable protection from the elements regardless of your activity. The beach umbrella sets up in just three seconds. As a result, you don't have to deal with finicky stakes or willowy tarps should a rainstorm roll in without notice. Just pop open the umbrella and ground stakes for extra stability. Add a new partner to make you happy journey, just take it home !Caution:

• Please Fold And Fasten The Umbrella Or Take It Down In Blustery And Thunderstorm Day To Protect The Umbrella
• Keep The Umbrella Away From Fireworks
• Children Should Be Under The Guidance Of Adults When Using The Umbrella
• Make Sure Lay Sandbags, Blocks, Concrete Or Pavers Onto The Base To Add More Strength To The Umbrella Base

Feature

• Note:Stand Not Included!
• Tilt for more desired angles of shading
• Steel ribs and pole
• Frame with black power coating finish
• Robust tubular handle with crank & Waterproof polyester fabric
• 8 Sturdy power arms and pole & Metal cross base & Safety pin
• Ideal for commercial and residential use
• Stable for a beach umbrella, sun tent, rain shelter
• Steel pole with tilt and crank
• Large octagonal shape measures with airvent
• UV protective and water repellant;Easy-to-operate
• We suggest you to not leave the umbrella open in windy conditions
• 8 firm steel ribs construction support the canopy stably
• Heavy duty steel cross base for stability

Specification

• Color: Beige
• Umbrella Diameter: 10Ft
• Umbrella Cover Material: 180g Water-Proof Polyester
• 8 firm steel ribs construction support the canopy stably
• Umbrella Diameter: 10Ft,Total Height: 8Ft
• Heavy duty steel cross base for stability

This is our Hanging Offset Umbrella, sun tent, rain shelter, and more all in one, the parasol gives you instant portable protection from the elements regardless of your activity. The beach umbrella sets up in just three seconds. As a result, you don't have to deal with finicky stakes or willowy tarps should a rainstorm roll in without notice. Just pop open the umbrella and ground stakes for extra stability. Add a new partner to make you happy journey, just take it home !Caution:

• Please Fold And Fasten The Umbrella Or Take It Down In Blustery And Thunderstorm Day To Protect The Umbrella
• Keep The Umbrella Away From Fireworks
• Children Should Be Under The Guidance Of Adults When Using The Umbrella
• Make Sure Lay Sandbags, Blocks, Concrete Or Pavers Onto The Base To Add More Strength To The Umbrella Base

Feature

• Note:Stand Not Included!

Tilt for more desired angles of shading

Steel ribs and pole

Frame with black power coating finish

Ideal for commercial and residential use

Stable for a beach umbrella, sun tent, rain shelter

Steel pole with tilt and crank

Large octagonal shape measures with airvent

UV protective and water repellant;Easy-to-operate

We suggest you to not leave the umbrella open in windy conditions

8 firm steel ribs construction support the canopy stably

Heavy duty steel cross base for stability

Specification

• Color:Burgundy
• Umbrella Diameter: 10Ft
• Umbrella Cover Material: 180g Water-Proof Polyester
• 8 firm steel ribs construction support the canopy stably
• Total Height: 8Ft
• Heavy duty steel cross base for stability
• Robust tubular handle with crank & Waterproof polyester fabric
• 8 Sturdy power arms and pole & Metal cross base

3CCT Adjustable Color Temperature
This lamp can be adjusted to a minimum color temperature of 3000K to emit a soft and warm glow, neither harsh nor flickering; reduce your stress and promote sleep, is the best choice for bedroom lighting.

• U ser-friendly
• This light is 5%-100% dimmable and compatible with most LED dimmers on the market, making it the perfect choice for lighting up a conference room.

• Dimmer Compatible
• Compatible with LUTRON: DV-600P, PD-6WCL, MACL-153M, 603P;
• Compatible with LEVITON: DSL06, RNL06.

NOTE

• It is recommended to adjust the color temperature before installation; junction box not included.

• Warranty
• This product comes with a 3-year warranty for your rights and benefits as a customer, satisfaction guaranteed.

Specifications

• Wattage: 3.5W
• Voltage: AC120V
• Lifespan: 30000hrs
• CCT: 3000K4000K/5000K selectable
• Finish color: Oil Rubbed Bronze
• Waterproof rating: Wet location

This is our Hanging Offset Umbrella, sun tent, rain shelter, and more all in one, the parasol gives you instant portable protection from the elements regardless of your activity. The beach umbrella sets up in just three seconds. As a result, you don't have to deal with finicky stakes or willowy tarps should a rainstorm roll in without notice. Just pop open the umbrella and ground stakes for extra stability. Add a new partner to make you happy journey, just take it home !Caution:

• Please Fold And Fasten The Umbrella Or Take It Down In Blustery And Thunderstorm Day To Protect The Umbrella
• Keep The Umbrella Away From Fireworks
• Children Should Be Under The Guidance Of Adults When Using The Umbrella
• Make Sure Lay Sandbags, Blocks, Concrete Or Pavers Onto The Base To Add More Strength To The Umbrella Base

Feature

• Note:Stand Not Included!
• Tilt for more desired angles of shading
• Steel ribs and pole
• Frame with black power coating finish

• Ideal for commercial and residential use
• Stable for a beach umbrella, sun tent, rain shelter
• Steel pole with tilt and crank
• Large octagonal shape measures with airvent
• UV protective and water repellant;Easy-to-operate
• We suggest you to not leave the umbrella open in windy conditions
• 8 firm steel ribs construction support the canopy stably
• Heavy duty steel cross base for stability

Specification

• Color:Tan
• Umbrella Diameter: 10Ft
• Umbrella Cover Material: 180g Water-Proof Polyester
• 8 firm steel ribs construction support the canopy stably
• Umbrella Diameter: 10Ft,Total Height: 8Ft
• Heavy duty steel cross base for stability

This Is Our Hanging Offset Umbrella, Sun Tent, Rain Shelter, And More All In One, The Parasol Gives You Instant Portable Protection From The Elements Regardless Of Your Activity. The Beach Umbrella Sets Up In Just Three Seconds. As A Result, You Don't Have To Deal With Finicky Stakes Or Willowy Tarps Should A Rainstorm Roll In Without Notice. Just Pop Open The Umbrella And Ground Stakes For Extra Stability. Add A New Partner To Make You Happy Journey, Just Take It Home !

Feature

• Hanging Umbrella With Crank
• Tilt For More Desired Angles Of Shading
• Steel Ribs And Pole
• Frame With Black Power Coating Finish

• Ideal For Commercial And Residential Use
• Stable For A Beach Umbrella, Sun Tent, Rain Shelter
• Steel Pole With Tilt And Crank
• Large Octagonal Shape Measures With Airvent
• UV Protective And Water Repellant
• Easy-To-Operate
• We Suggest You To Not Leave The Umbrella Open In Windy Conditions
• 8 Firm Steel Ribs Construction Support The Canopy Stably
• Heavy Duty Steel Cross Base For Stability

Specification

• Color: Orange
• Umbrella Diameter: 10Ft
• Total Height: 8Ft
• Pole Material: Steel
• Umbrella Cover Material: 180g Water-Proof Polyester
• Assembly Instruction Included

Caution:

• Please Fold And Fasten The Umbrella Or Take It Down In Blustery And Thunderstorm Day To Protect The Umbrella
• Keep The Umbrella Away From Fireworks
• Children Should Be Under The Guidance Of Adults When Using The Umbrella
• Make Sure Lay Sandbags, Blocks, Concrete Or Pavers Onto The Base To Add More Strength To The Umbrella Base

Soreno Grigio features contemporary smoky gray porcelain tiles for a stylish appearance indoors and out. The gorgeous, in-demand neutral tones of the surfaces complement any architectural style and color palette.Carry the flow of an interior room to the outdoors using Soreno Grigio. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.

Showcase your finest flourishing seedlings in the eco-friendly Contempo Tall Square Planter. Created from a combination of recycled polymer, stone powder and wood dust, this planter is a lightweight, weather-resistant solution to your gardening needs. The use of symmetry and clean lines ensures that Arcadia Garden Products's creations are aesthetically pleasing and visually interesting.

• Square planter
• Safe to drill for drainage
• Color: Terra-cotta
• Materials: Plastic, stone and wood
• Dimensions: W 13" x D 13" x H 28"

Trevi Silver 24 in. x 24 in. Premium Paver Gray Light background with flecks of gray and white for a modern take on a timeless classic. Use them to beautiful floors, patios, pool decks, walkways and other features throughout residential and commercial properties. Unapologetically elegant, Trevi Silver Porcelain Pavers are also impressively durable, frost and stain resistant and they don't require sealing. This porcelain paver offers high slip-resistance and even in hot climates this innovative paver stays bare-foot comfortable. Allowing for supreme design flexibility, This pavers can be set on grass, sand set or installed with mortar over a concrete bed.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.

Trevi Silver 24 in. x 24 in. Premium Paver Gray Light background with flecks of gray and white for a modern take on a timeless classic. Use them to beautiful floors, patios, pool decks, walkways and other features throughout residential and commercial properties. Unapologetically elegant, Trevi Silver Porcelain Pavers are also impressively durable, frost and stain resistant and they don't require sealing. This porcelain paver offers high slip-resistance and even in hot climates this innovative paver stays bare-foot comfortable. Allowing for supreme design flexibility, This pavers can be set on grass, sand set or installed with mortar over a concrete bed.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.

Soreno Taupe features soft beige and light brown tones with a subtle pattern for a look reminiscent of natural stone. This large format pavers comes with neutral tones of the surfaces complement any architectural style and color palette. Extend the beauty of your interior space to the outdoors by using Soreno Taupe. Easy to install, stain resistant and low-maintenance, this large format porcelain paver is a top choice for those who want designer style without sacrificing practicality. Sand set it or place it directly on grass for a casual look or install with mortar over a concrete bed to achieve a more formal feel. Recommended for both interior and exterior design projects including floors, paths, driveways, pool areas and patios, this multitalented porcelain paver will give your installation or remodel a classic, yet modern look.
For SAMPLE ORDERS - Order affordable samples before you place an actual full order. Samples are usually 4inch x 4inch or 6inch x 6inch based on the type of tile. These samples are just a representation of the actual tiles for you to see the color and texture of the tiles. Samples are shipped by Fedex / USPS ground service, sometimes the samples are not in good shape on delivery as they are individually packed and lack the proper safe packaging as the actual tile order. Nevertheless they solve the purpose of showing you the color, texture and the pattern of the tiles.

This electric snow melting kit is designed to be embedded in a driveway to provide 2 heated tire tracks (2" x 30") that will keep your driveway passable even in the dead of winter. Using this tire tracks format of heating is an extremely cost effective way to enjoy the benefits of snow melting as it cuts down on both material costs and operating costs without sacrificing functionality. The included mats have an impressive heat output of 50 watts per square foot for dependable and efficient snow melting performance.

It includes an automatic, configurable snow melting controller with several different operation methods. The control offers a manual override option and an adjustable hold-on timer, which allows heater operation for up to 8 hours after the precipitation event ends to ensure evaporation of the melted snow. This kit also includes an NEC-required plaque and an aerial-mounted snow sensor that provides versatile and cost-effective automatic snow detection.

• Covers 60 Sq. Ft (per mat)
• Specs (per mat): 12.5 Amps, 19.20 Ohms, 3000 Watts, 240 Volts
• For applications under asphalt, concrete and pavers

This Is Our Hanging Offset Umbrella, Sun Tent, Rain Shelter, And More All In One, The Parasol Gives You Instant Portable Protection From The Elements Regardless Of Your Activity. The Beach Umbrella Sets Up In Just Three Seconds. As A Result, You Don't Have To Deal With Finicky Stakes Or Willowy Tarps Should A Rainstorm Roll In Without Notice. Just Pop Open The Umbrella And Ground Stakes For Extra Stability. Add A New Partner To Make You Happy Journey, Just Take It Home !

Feature

• Brand New And High Quality
• Hanging Umbrella With Crank
• Tilt For More Desired Angles Of Shading
• Steel Ribs And Pole
• Frame With Black Power Coating Finish

• Ideal For Commercial And Residential Use
• Stable For A Beach Umbrella, Sun Tent, Rain Shelter
• Steel Pole With Tilt And Crank
• Large Octagonal Shape Measures With Airvent
• UV Protective And Water Repellant
• Easy-To-Operate
• We Suggest You To Not Leave The Umbrella Open In Windy Conditions
• 8 Firm Steel Ribs Construction Support The Canopy Stably
• Heavy Duty Steel Cross Base For Stability

Specification

• Color: Blue
• Umbrella Diameter: 10Ft
• Total Height: 8.4Ft
• Pole Material: Steel
• Umbrella Cover Material: 180g Water-Proof Polyester
• Assembly Instruction Included

Caution:

• Please Fold And Fasten The Umbrella Or Take It Down In Blustery And Thunderstorm Day To Protect The Umbrella
• Keep The Umbrella Away From Fireworks
• Children Should Be Under The Guidance Of Adults When Using The Umbrella
• Make Sure Lay Sandbags, Blocks, Concrete Or Pavers Onto The Base To Add More Strength To The Umbrella Base

Offers economy with good bond strength for most tile projects and is recommended for floor installations. Good for setting Saltillo and other similar clay pavers. Offers good working time to apply and adjust tiles. For increased performance, use Custom® Building Products' ThinSet Admix Concentrate or Thin-Set Mortar Admix when bonding dense tiles (porcelain and glass) or setting over Exterior Grade Plywood (EGP), existing tile and for exterior applications. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and A118.11 when mixed with Thin-Set Admix Concentrate or Thin-Set Mortar Admix.

• 50 lb bag
• White
• For installations over concrete floors
• Mix with Thin-Set Admix Concentrate for higher bond strengths
• Meets ANSI A118.4 and A118.11 when mixed with Thin-Set Admix Concentrate
• Protected by moldgard technology to resist mold & mildew growth.

Suitable Tile Types:

• Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile
• Impervious porcelain and glass tile
• Brick and stone veneer
• Cement-based precast terrazzo
• Natural stone tile.