FREE shipping on orders over $49!* Details
"Porcelain Fireplace Tiles" – search in Products
Sort by:
Price
8,072 Results
Arte White Porcelain Floor and Wall Tileby Merola Tile(597)
$11.40/sq ft.
As the original encaustic-look porcelain tile that started the patterned tile trend, our Arte White Porcelain Floor and Wall Tile draws inspiration from artisan cement tiles. Crafted in Spain, this porcelain tile features a large floral old-world pattern in rich charcoal black that frames dueling arcs in the center, offering subtle contrast and dimension to the decoration. Set on the highest-quality solid snow white base glaze, the contrasting design features a weathered, speckled look, replicating the beauty of its cement muse. The floral, geometric pattern blends into virtually any design theme, making this an exceptional product for modern installations and historic renovations. Its impervious and frost-resistant features make it an ideal choice for both indoor and outdoor residential installations including kitchens, bathrooms, showers, entryways and patios. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 10.88 square feet, 16 pieces per case. Case weight is 43.68 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 9.75 in. width x 9.75 in. length x 0.4 in. thick
- Glazed, slightly textured finish with a low sheen and uniform appearance in tone
- PEI Rating III is suitable for medium-duty residential floors including kitchens, halls, corridors, balconies, terraces and areas used more often with normal footwear and small amounts of dirt
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Porc-A-Fix Porcelain Touchup Repair Glaze For Toto , White(34)
$28
Free Shipping
TOTO Porcelain Glaze Enamel Steel Touch-Up Paint. Enamel Steel Tough porcelain glaze makes scratches and chips practically disappear. A unique, one step process to repair unsightly chips, scratches, and other imperfections in porcelain tubs, sinks, toilets includes porcelain on steel, cast iron, ceramic. Replacement chips or scratches in porcelain, enamel glaze on TOTO Plumbing Fixtures.
Porc-a-Fix is the only porcelain repair product with specific color matches to the major porcelain bathroom fixture manufacturers. Porc-a-Fix is a unique, one-step process to repair unsightly chips, scratches, and other imperfections in porcelain tubs, sinks, toilets, washers, dryers, kitchen appliances and tile. This includes porcelain on steel, cast iron or clay ceramic. Available in all the current colors and shades of white, Porc-a-Fix is also available in the colors the manufacturers stopped producing 10, 15, 20 even 25 years ago, but which are still prevalent in bathrooms and kitchens around the world today. Each package contains 1/2 ounce (15cc) of touch-up material, brush top applicator, finishing paper and complete instructions. PORC-a-FIX is simple to apply, as there is no mixing of ingredients or long waiting periods, will retain a high gloss that lasts and lasts.
Porc-a-Fix is the only porcelain repair product with specific color matches to the major porcelain bathroom fixture manufacturers. Porc-a-Fix is a unique, one-step process to repair unsightly chips, scratches, and other imperfections in porcelain tubs, sinks, toilets, washers, dryers, kitchen appliances and tile. This includes porcelain on steel, cast iron or clay ceramic. Available in all the current colors and shades of white, Porc-a-Fix is also available in the colors the manufacturers stopped producing 10, 15, 20 even 25 years ago, but which are still prevalent in bathrooms and kitchens around the world today. Each package contains 1/2 ounce (15cc) of touch-up material, brush top applicator, finishing paper and complete instructions. PORC-a-FIX is simple to apply, as there is no mixing of ingredients or long waiting periods, will retain a high gloss that lasts and lasts.
Porc-a-Fix is the only porcelain repair product with specific color matches to the major porcelain bathroom fixture manufacturers. Porc-a-Fix is a unique, one-step process to repair unsightly chips, scratches, and other imperfections in porcelain tubs, sinks, toilets, washers, dryers, kitchen appliances and tile. This includes porcelain on steel, cast iron or clay ceramic. Available in all the current colors and shades of white, Porc-a-Fix is also available in the colors the manufacturers stopped producing 10, 15, 20 even 25 years ago, but which are still prevalent in bathrooms and kitchens around the world today. Each package contains 1/2 ounce (15cc) of touch-up material, brush top applicator, finishing paper and complete instructions. PORC-a-FIX is simple to apply, as there is no mixing of ingredients or long waiting periods, will retain a high gloss that lasts and lasts.
FEATURES:
TOTO Porcelain Glaze Enamel Steel Touch-Up Paint. Enamel Steel Tough porcelain glaze makes scratches and chips practically disappear. A unique, one step process to repair unsightly chips, scratches and other imperfections in porcelain tubs, sinks, toilets includes porcelain on steel, cast iron, ceramic. Replacement chips or scratches in porcelain, enamel glaze on TOTO Plumbing Fixtures.Porc-a-Fix is the only porcelain repair product with specific color matches to the major porcelain bathroom fixture manufacturers. Porc-a-Fix is a unique, one-step process to repair unsightly chips, scratches, and other imperfections in porcelain tubs, sinks, toilets, washers, dryers, kitchen appliances and tile. This includes porcelain on steel, cast iron or clay ceramic. Available in all the current colors and shades of white, Porc-a-Fix is also available in the colors the manufacturers stopped producing 10, 15, 20 even 25 years ago, but which are still prevalent in bathrooms and kitchens around the world today. Each package contains 1/2 ounce (15cc) of touch-up material, brush top applicator, finishing paper and complete instructions. PORC-a-FIX is simple to apply, as there is no mixing of ingredients or long waiting periods, will retain a high gloss that lasts and lasts.
FEATURES:
- Porc-a-fix Porcelain repair touches up glaze kit
- Color: Toto Cotton White, Gray
- Non-yellowing / High Gloss / No Mixing of Ingredients
- Repairs: Chips, Cracks, and Scratches in Porcelain and Enamel
- 15cc bottle for chips, scratches or cracks
Hudson Edge Light Green Porcelain Floor and Wall Tileby Merola Tile(5)Sponsored
$22.17/sq ft.
Offering a mosaic look, our Hudson Edge Light Green Porcelain Floor and Wall Tile features a smooth, glossy finish, providing decorative appeal that adapts to a variety of stylistic contexts. With its impervious, frost-resistant features, this mosaic is an ideal selection for both indoor and outdoor commercial and residential installations, including kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Hudson Collection. Tile is the better choice for your space!
- 10.6 square feet, 10 pieces per case. Case weight is 17 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 12.25 in. width x 12.25 in. length x 0.25 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
Metro 1" Hex Glossy White w/Single Flower Porcelain Floor and Wall Tileby Merola Tile(52)
$15.98/sq ft.
Transform your space into a tribute to retro design with our Metro Hex Glossy White with Single Flower Porcelain Floor and Wall Mosaic Tile. As a modern deviation from the classic mosaic, this fresh option is a throwback to traditional retro design with a contemporary feel. Glossy white hexagons are accented by contrasting glossy black hexagons arranged into the shape of a flower on an interlocking mesh to create a seamless installation. This minimalistic geometric porcelain mosaic is unique yet simplistic enough to integrate into any design, ranging from traditional style renovations to modern home projects. Its impervious and frost-resistant features make this an ideal tile for both indoor and outdoor residential use, including backsplashes, bathrooms, showers, kitchens and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Metro Collection. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 8.6 square feet, 10 pieces per case. Case weight is 17.6 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.25 in. width x 11.88 in. length x 0.24 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has no available COF wet rating. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
Mosaic Handmade Porcelain Penny Round Tile for Floors Walls, Deep Ocean Blueby Flooring Supply Shop
*** Price per Sheet ***
For use in
Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
$34
Free Shipping
- MOSAIC PORCELAIN PENNY ROUND - DEEP OCEAN BLUE
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: Mixed Blue
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Best Seller
Oh My Dog Porcelain Floor and Wall Tileby Merola Tile(3)Sponsored
$17.75/sq ft.
Capturing the appearance of a patterned look, our Oh My Dog Porcelain Floor and Wall Tile features a mixed textured finish, providing decorative appeal that adapts to a variety of stylistic contexts. Containing 13 different print variations that are randomly distributed throughout each case, this white square tile offers a one-of-a-kind look. With its impervious, frost-resistant features, this tile is an ideal selection for both indoor and outdoor residential installations, including kitchens, bathrooms, backsplashes, showers, hallways and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Oh My Collection. Tile is the better choice for your space!
- 10.88 square feet, 16 pieces per case. Case weight is 45.81 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 9.75 in. width x 9.75 in. length x 0.4 in. thick
- Glazed, mixed texture with a mixed finish and slight variation in tone
- PEI Rating III is suitable for medium-duty residential floors including kitchens, halls, corridors, balconies, terraces and areas used more often with normal footwear and small amounts of dirt
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Porcelain Trims 3"x12" Bullnose Tile, Calacatta Gold Matteby Flooring Supply Shop
$22
Free Shipping
Porcelain Trims Calacatta Gold Matte Bullnose 3"x12" - White Gold
*** PRICE IS PER PIECE ***
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
*** PRICE IS PER PIECE ***
- Material: Porcelain
- Sheet Size: 3" x 12"
Thickness:
- Colors: White Gold
- Finish: Matte finish
Technical Specification
- Abrasion Resistance - 0.42 wet
- DIN 51130 - R9
- Frost Resistant - Resistant
- MOHS (Scratch Resistant) - N/A
- PEI Rating - 4
- Shade Variation - V3 (moderate variation)
- Staining Resistance - >Class 3
- Thermal Shock - Resistant
- Type of Porcelain - Color Body
- Water Absorption - ~0.08% .
2. Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
5. Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Greenby The Mosaic Factory(36)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Green with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Hudson Penny Round Vintage Yellow Porcelain Floor and Wall Tileby Merola Tile(363)
$20.68/sq ft.
Offering a mosaic look, our Hudson Penny Round Vintage Yellow Porcelain Floor and Wall Tile features a smooth, glossy finish, providing decorative appeal that adapts to a variety of stylistic contexts. With its impervious, frost-resistant features, this mosaic is an ideal selection for both indoor and outdoor commercial and residential installations, including kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Hudson Collection. Tile is the better choice for your space!
- 10.5 square feet, 10 pieces per case. Case weight is 18.02 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.88 in. width x 12.63 in. length x 0.21 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
Glazed Porcelain Mosaic Tile Sheet Sevilla 6"x1" Finger Glossy Gray, Sampleby The Mosaic Factory
$9
Free Shipping
This glazed porcelain mosaic tile is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. The tiles can also be peeled off the mesh and installed individually, mixed with other colors. This tile can be installed in wet areas as well as dry areas. Please note that the images shown are actual photographs of the tiles, however, shade and size variations are inherent characteristics in all mosaic tile products. These variations are a trademark of hand-crafted quality and adds to the unique beauty of your individual mosaic. Product Specifications
- Color: Gray with speckles
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light TrafficSize Options
- 'Sample' = Is a cut piece of a sheet (approx. 1/4) for color and texture reference
- 'Set of 10 sheets' = A case of 10 sheets (covering approx 9.5 sq. ft.)
- Samples are non-returnable
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs.
Faenza Azul Ceramic Floor and Wall Tileby Merola Tile(48)
SALE
$13.94/sq ft.$15.75/sq ft.
It is easy to picture sun-drenched streets of Spain when looking at our Faenza Azul Ceramic Floor and Wall Tile. Save time and labor spent arranging smaller square tiles and instead install these durable ceramic slabs, which have nine squares separated by scored grout lines. This breathtaking blue glaze features a collection of encaustic-inspired designs. Imitations of the scuffs and spots that are the marks of well-loved, worn, century-old tile and the rich red tones peeking through are the perfect contrast to the faded shades of denim blue. These rustic scuffs and spots convince that this tile is truly aged. There are 3 different variations of scuffs and pattern arrangements available that are randomly scattered throughout each case, offering a sporadic patchwork look. Designed by interior architect and furniture designer Francisco Segarra, this tile is a true reflection of vintage industrial design. The scored grout lines can be grouted with the color of your choice to further customize your installation. Bring rustic charm to your interior with this easy-to-maintain look.
- 12.0 square feet, 10 pieces per case. Case weight is 48.32 lbs.
- Grade 1, first-quality ceramic tile for floor and wall use
- 13 in. width x 13 in. length x 0.39 in. thick
- Glazed, slightly textured finish with a low sheen and moderate variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Semi-Vitreous tiles have water absorption of more than 3% but less than 7% for indoor use
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla 3.5"x0.5" Mini KitKat Matte Whiteby The Mosaic Factory(42)
$14.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Matte
- Individual tile size (WxH): 3.6"x 0.47"
- Sheet size (WxH): 11.1"x 12.1" (0.94 sq. ft.)
- Thickness: 8 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Best Seller
Metro 2" Hex Glossy White Porcelain Floor and Wall Tileby Merola Tile(3)Sponsored
$16.48/sq ft.
Offering a mosaic look, our Metro 2 in. Hex Glossy White Porcelain Floor and Wall Tile features a smooth, glossy finish, providing decorative appeal that adapts to a variety of stylistic contexts. With its impervious features, this white hexagon mosaic is an ideal selection for both indoor and outdoor residential installations, including bathrooms, backsplashes, showers, hallways and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Metro Collection. Tile is the better choice for your space!
- 10.0 square feet, 10 pieces per case. Case weight is 24.3 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.13 in. width x 12.63 in. length x 0.25 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
Mosaic Porcelain Tile Mancala Pebble Series Floor Wall Pool Bathroom Shower, Skyby Flooring Supply Shop(2)
$58
Free Shipping
MOSAIC PORCELAIN TILE MANCALA PEBBLE SERIES - Sky Jewel
Pool Rated for use in Swimming Pools
High polished, hand-made, heart-shaped porcelain pieces. Colors blended with blue, green and white pieces.
** Price is per Piece **
For use in
Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
MAINTENANCE & CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Pool Rated for use in Swimming Pools
High polished, hand-made, heart-shaped porcelain pieces. Colors blended with blue, green and white pieces.
** Price is per Piece **
- Material: Handmade Porcelain
- Piece Size: 11 1/2" x 11 1/2"
- Sq Ft Per Piece: 0.92
- Thickness: 1/4"
- Colors: Sky Jewel
- Finish: Glossy
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls, Exterior Floors
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
MAINTENANCE & CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
10.47"x12" Porcelain Mosaic Tile Sheet Paris Rhombus Glossy Whiteby The Mosaic Factory(18)
$15.42/sq ft.
Set of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 1.90"x 3.19"
- Sheet size (WxH): 10.47"x 12.00" (0.87 sq. ft.)
- Thickness: 5 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shade Variation
- PEI Rating
Miracle Sealants 511 Impregnator Penetrating Sealer, 2 Gallonsby Miracle Sealants(28)
$252
Free Shipping
511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery. INDEPENDENT LABORATORY TESTS SHOW 511 IMPREGNATOR OUTPERFORMS COMPETITIVE PRODUCTS.
500 - 4,000 square feet per gallon. 511 Impregnator is V.O.C. Compliant where applicable.
AVAILABLE SIZES
- WATER, STAIN SLIP PROTECTION FOR
- Granite
- Travertine
- Quartz
- Stucco
- Slate
- Terrazzo
- Agglomerate
- Glazed Tile
- Ceramic Tile
- Porcelain Tile
- Polished Tile
- Polished Granite
- Polished Marble
- Sanded Grout
- Quarry Tile
SPECIAL FEATURES
- Interior and Exterior Use
- Weather Resistant
- OK for Food Areas
- Superior Coverage
- Easy-to-Use
- U.V. Transparent
- Less Expensive
500 - 4,000 square feet per gallon. 511 Impregnator is V.O.C. Compliant where applicable.
AVAILABLE SIZES
- Quart
- Gallon
- Due TO VOC Regulations 511 Impregnator Gallon Size Cannot Be Shipped to Fallowing State:
- AK, AZ, CA, CO, CT, DC, DE, GU, HI, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, PR, RI, UT, VA, VI, VT, WI.
- You Can Buy 4 Quarts Instead.
- Please For more quantity orders or any questions please feel free to contact us.
Best Seller
Heritage Hex Indigo Porcelain Floor and Wall Tileby Merola Tile(18)
$16.48/sq ft.
Capturing the rustic appearance of natural stone in a durable porcelain material, our Heritage Hex Indigo Porcelain Floor and Wall Tile brings the irreplaceable beauty of nature into any living space. This matte hexagon tile features natural mineral-like pattern variations in faded light and dark blue hues, replicating the appearance of aged stone. Composed of rich detail and a slightly textured surface, this unique porcelain tile offers decorative, rustic beauty through realistic scuffs and spots that are the marks of well-loved, worn, century-old tile. This trendsetting display of stone-look design is visually appealing and versatile, and blends beautifully with a range of styles from vintage industrial to modern day. Its impervious, frost-resistant and durable features make this an ideal choice for both commercial and residential indoor and outdoor installations including, kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 7.5 square feet, 25 pieces per case. Case weight is 28.99 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 7 in. width x 8 in. length x 0.35 in. thick
- Glazed, mixed texture with a mixed finish and moderate variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Fingers 6"x1" Glossy Whiteby The Mosaic Factory(29)
$21.37/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Hudson Kite Glacier Porcelain Floor and Wall Tileby Merola Tile
$22.94/sq ft.
Our Hudson Kite Glacier Porcelain Floor and Wall Mosaic Tile instantly elevates spaces through a refreshing combination of geometric design and vivid color. Featuring a reactive glaze, these diamond-shaped tiles have soothing hues of light and dark blue that blend to white around the edges. This floor and wall mosaic creates a unique sporadic design through a pleasing mixture of cool-toned tints with additional dimension added by the smooth, high-gloss finish. Its impervious and frost-resistant features make this porcelain mosaic tile an ideal choice for both commercial and residential indoor and outdoor installations including, kitchens, backsplashes, bathrooms, showers, entryways, fireplace facades and patios. Please note that although we strive to ensure the accuracy of our product content, the reactive glazing creates a stunning one-of-a-kind look which may result in noticeable color variation between different dye lots. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 8.56 square feet, 10 pieces per case. Case weight is 22.79 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.13 in. width x 11.75 in. length x 0.23 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and slight variation in tone
- PEI Rating III is suitable for medium-duty residential floors including kitchens, halls, corridors, balconies, terraces and areas used more often with normal footwear and small amounts of dirt
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
Llama Flower Loire Noce Porcelain Floor and Wall Tileby Merola Tile(1)Sponsored
$15.21/sq ft.
Inspired by a floral look, our Llama Flower Loire Noce Porcelain Floor and Wall Tile features a slightly textured, matte finish, providing decorative appeal that adapts to a variety of stylistic contexts. Containing 23 different print variations that are randomly distributed throughout each case, this brown hexagon tile offers a one-of-a-kind look. With its impervious, frost-resistant features, this tile is an ideal selection for both indoor and outdoor commercial and residential installations, including kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Llama Collection. Tile is the better choice for your space!
- 11.5 square feet, 25 pieces per case. Case weight is 50.64 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 8.63 in. width x 9.88 in. length x 0.38 in. thick
- Glazed, slightly textured finish with a low sheen and slight variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Arte Soft Grey Porcelain Floor and Wall Tileby Merola Tile(1)
SALE
$11.40/sq ft.$12.96/sq ft.
As the original encaustic-look porcelain tile that started the patterned tile trend, our Arte Soft Grey Porcelain Floor and Wall Tile draws inspiration from artisan cement tiles. Crafted in Spain, this porcelain tile features a large floral old-world pattern in off-white that frames dueling arcs in the center, offering subtle contrast and dimension to the decoration. Set on the highest-quality light grey base glaze, the contrasting design features a weathered, speckled look, replicating the beauty of its cement muse. The floral, geometric pattern blends into virtually any design theme, making this an exceptional product for modern installations and historic renovations. Its impervious, frost resistant, and durable features make it an ideal choice for both commercial and residential indoor and outdoor installations including, kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios, and fireplace facades. This tile is a perfect choice on its own or coordinated with other products in the Arte series. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde, and PVC.
- 10.88 square feet, 16 pieces per case. Case weight is 43.68 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 9.75 in. width x 9.75 in. length x 0.4 in. thick
- Glazed, smooth finish with a low sheen and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla KitKat Finger 6"x1" Glossy Turquoiseby The Mosaic Factory(36)
$21.89/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Turquoise
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.95 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Heritage Hex Carbon Porcelain Floor and Wall Tileby Merola Tile(18)
$16.48/sq ft.
Capturing the rustic appearance of natural stone in a durable porcelain material, our Heritage Hex Carbon Porcelain Floor and Wall Tile brings the irreplaceable beauty of nature into any living space. This matte hexagon tile features natural mineral-like pattern variations in faded light and dark charcoal grey hues, replicating the appearance of aged stone. Composed of rich detail and a slightly textured surface, this unique porcelain tile offers decorative, rustic beauty through realistic scuffs and spots that are the marks of well-loved, worn, century-old tile. This trendsetting display of stone-look design is visually appealing and versatile, and blends beautifully with a range of styles from vintage industrial to modern day. Its impervious, frost-resistant and durable features make this an ideal choice for both commercial and residential indoor and outdoor installations including, kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 7.5 square feet, 25 pieces per case. Case weight is 28.99 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 7 in. width x 8 in. length x 0.35 in. thick
- Glazed, mixed texture with a mixed finish and moderate variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Best Seller
Glazed Porcelain Mosaic Tile Sheet Sevilla 6"x1" Maxi KitKat Matte Whiteby The Mosaic Factory(8)
$16.98/sq ft.
Price is for a lot of 60 sheets - only available per increments of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: White
- Material: Porcelain
- Finish: Matte
- Individual tile size (WxH): 5.7"x 0.8"
- Sheet size (WxH): 11.7"x 11.8" (0.96 sq. ft.)
- Thickness: 8 mm
- Grout joint: 3 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
- Sample
- It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
- When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
- Shipping and order quantity
- Due to the delicate nature of this tile, this item is only available for shipment on a pallet with a freight carrier.
- Therefore this item can only be ordered per increments of 60 sheets (6 boxes).
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
Carrara Marble 2x4 Subway Brick Mosaic Tile Polished Venato Carrera, 1 sheetby Stone Center Online(89)
$13.98/sq ft.
Free Shipping
Featuring a classic design with a luxurious twist, the Italian Carrara Venato Polished Mosaic Wall and Floor Tiles are an elegant choice for any interior/exterior remodeling projects. These 2"x4" tiles can be used for your kitchen backsplash, bathroom flooring, shower surround, countertop, dining room, entryway, corridor, balcony, spa, pool or fountain.
Features:
- Carrara White Marble 2"x4" brick pieces mounted on 12"x12" sturdy mesh tile sheet
- 3 rows and 6 columns with 18 stones on each sheet; 5/16" thickness; Polished finish
- Carefully Selected; Consistent in size and finish
- Factory Direct
- Price per sheet (1 sq.ft.)
- Number of Pieces Included: 1
- Sq. ft. in 1 Quantity: 1
- Mesh Backing
Fantasy Hex Pink Porcelain Floor and Wall Tileby Merola Tile(29)
SALE
$12.89/sq ft.$15.04/sq ft.
Capturing the appearance of a patterned look, our Fantasy Hex Pink Porcelain Floor and Wall Tile features a slightly textured, matte finish, providing decorative appeal that adapts to a variety of stylistic contexts. With its impervious, frost-resistant features, this white hexagon tile is an ideal selection for both indoor and outdoor commercial and residential installations, including kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Fantasy Collection. Tile is the better choice for your space!
- 11.5 square feet, 25 pieces per case. Case weight is 50.64 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 8.63 in. width x 9.88 in. length x 0.38 in. thick
- Glazed, slightly textured finish with a low sheen and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Kings Star Nero Ceramic Floor and Wall Tileby Merola Tile(113)
SALE
Sponsored$13.94/sq ft.$15.89/sq ft.
Old-world European elegance radiates from our Kings Star Nero Ceramic Floor and Wall Tile, imported from Spain. Save time and labor spent arranging smaller square tiles and instead install these durable ceramic slabs, which have four squares separated by scored grout lines. The defining feature of this encaustic-inspired tile is the unique, low-sheen glaze in beige tones with centered black stars in each square. Variation throughout each tile mimics an authentic aged appearance. Designed by interior architect and furniture designer Francisco Segarra, this tile is a true reflection of vintage industrial design. Realistic imitations of scuffs and spots that are the marks of well-loved, worn, century-old tile bring rustic charm to your interior. These rustic scuffs and spots convince that this tile is truly aged. There are 9 different variations available that are randomly scattered throughout each case. The scored grout lines can be grouted with the color of your choice to further customize your installation.
- 10.95 square feet, 5 pieces per case. Case weight is 51.28 lbs.
- Grade 1, first-quality ceramic tile for floor and wall use
- 17.63 in. width x 17.63 in. length x 0.42 in. thick
- Glazed, slightly textured finish with a low sheen and moderate variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Semi-Vitreous tiles have water absorption of more than 3% but less than 7% for indoor use
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Not frost resistant
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Mosaic Handmade Porcelain Penny Round Tile for Floors Walls, Shadowby Flooring Supply Shop
*** Price per Sheet ***
For use in
Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
$34
Free Shipping
- MOSAIC PORCELAIN PENNY ROUND - SHADOW
- Pool Rated for use in Swimming Pools
*** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11.5"x12.25"
- Individual Size: 3/4"
- Sq Ft Per Piece: 0.98
- Thickness:.25"
- Colors: Mixed Blue and Brown
- Finish: Matte
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
MAINTENANCE and CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout and Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Heritage Hex Snow Porcelain Floor and Wall Tileby Merola Tile(18)
$16.48/sq ft.
Capturing the rustic appearance of natural stone in a durable porcelain material, our Heritage Hex Snow Porcelain Floor and Wall Tile brings the irreplaceable beauty of nature into any living space. This matte hexagon tile features natural mineral-like pattern variations in off-white and light grey hues, replicating the appearance of aged stone. Composed of rich detail and a slightly textured surface, this unique porcelain tile offers decorative, rustic beauty through realistic scuffs and spots that are the marks of well-loved, worn, century-old tile. This trendsetting display of stone-look design is visually appealing and versatile, and blends beautifully with a range of styles from vintage industrial to modern day. Its impervious, frost-resistant and durable features make this an ideal choice for both commercial and residential indoor and outdoor installations including, kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 7.5 square feet, 25 pieces per case. Case weight is 28.99 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 7 in. width x 8 in. length x 0.35 in. thick
- Glazed, mixed texture with a mixed finish and moderate variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Best Seller
Heritage Hex Shadow Porcelain Floor and Wall Tileby Merola Tile(18)
$16.48/sq ft.
Capturing the rustic appearance of natural stone in a durable porcelain material, our Heritage Hex Shadow Porcelain Floor and Wall Tile brings the irreplaceable beauty of nature into any living space. This matte hexagon tile features natural mineral-like pattern variations in faded light and dark grey hues, replicating the appearance of aged stone. Composed of rich detail and a slightly textured surface, this unique porcelain tile offers decorative, rustic beauty through realistic scuffs and spots that are the marks of well-loved, worn, century-old tile. This trendsetting display of stone-look design is visually appealing and versatile, and blends beautifully with a range of styles from vintage industrial to modern day. Its impervious, frost-resistant and durable features make this an ideal choice for both commercial and residential indoor and outdoor installations including, kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 7.5 square feet, 25 pieces per case. Case weight is 28.99 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 7 in. width x 8 in. length x 0.35 in. thick
- Glazed, mixed texture with a mixed finish and moderate variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Colmena Hex Matte White Porcelain Floor and Wall Tileby Merola Tile
$38.08/sq ft.
Transform your space into a tribute to retro design with our Colmena Hex Matte White Porcelain Floor and Wall Mosaic Tile. As a modern deviation from the classic mosaic, this fresh option is a throwback to traditional retro design with a contemporary feel. Matte white hexagons with rounded edges are arranged on an interlocking mesh to create a seamless installation. This minimalistic geometric porcelain mosaic is unique yet simplistic enough to integrate into any design, ranging from traditional style renovations to modern home projects. Its impervious and durable features make this an ideal tile for both indoor and outdoor use, including backsplashes, bathrooms, showers, kitchens, fireplace facades, patios and entryways. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde and PVC.
- 4.75 square feet, 5 pieces per case. Case weight is 8.35 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.5 in. width x 11.63 in. length x 0.16 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a low sheen and uniform appearance in tone
- PEI Rating I is suitable for light-duty residential floors, bathrooms and bedrooms without direct access from outside; no scratching dirt can be present
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has no available COF wet rating. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Japan
Carrara Marble Hexagon Mosaic Tile Venato Carrera White 3 inch Honed, 1 sheetby Stone Center Online(201)
$18.82/sq ft.
Free Shipping
Blending the contemporary style of geometric pattern and the traditional elegance of Italian Carrara white marble, this tile is a dream for the bathroom in need of a versatile look. Mounted on sturdy mesh, the tile is ideal as a kitchen backsplash, bathroom flooring, shower surround, countertop, or in a pool, spa or fountain.
Features:
- Carrara White Marble 3" (from point to point) hexagon pieces mounted on a sturdy mesh tile sheet
- 5 rows and 4 columns with 20 stones on each sheet; 5/16" thickness; Honed finish
- Carefully Selected
- Consistent in size and finish
- Factory Direct
- Price per sheet (0.92 sq.ft.)
- Number of Pieces Included: 1
- Sq. ft. in 1 Quantity: 1
- Mesh Backing
Americana Boston North Porcelain Floor and Wall Tileby Merola Tile(7)
$16.48/sq ft.
Offering a simplistic look, our Americana Boston North Porcelain Floor and Wall Tile features a medium textured, matte finish, providing decorative appeal that adapts to a variety of stylistic contexts. Containing 20 different print variations that are randomly distributed throughout each case, this brown square tile offers a one-of-a-kind look. With its impervious, frost-resistant features, this tile is an ideal selection for both indoor and outdoor residential installations, including kitchens, bathrooms, backsplashes, showers, hallways and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Americana Collection. Tile is the better choice for your space!
- 11.0 square feet, 20 pieces per case. Case weight is 45.88 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 8.75 in. width x 8.75 in. length x 0.45 in. thick
- Glazed, medium textured finish with a low sheen and slight variation in tone
- PEI Rating III is suitable for medium-duty residential floors including kitchens, halls, corridors, balconies, terraces and areas used more often with normal footwear and small amounts of dirt
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is ADA approved for slip resistance with a DCOF value of 0.42 or higher.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Spain
Best Seller
Metro 1" Hex Matte White w/Flower Porcelain Floor and Wall Tileby Merola Tile(37)Sponsored
$16.48/sq ft.
Transform your space into a tribute to retro design with our Metro Hex Matte White with Flower Porcelain Floor and Wall Mosaic Tile. As a modern deviation from the classic mosaic, this fresh option is a throwback to traditional retro design with a contemporary feel. Matte white hexagons are accented by contrasting matte black hexagons arranged into flower shapes on an interlocking mesh to create a seamless installation. This minimalistic geometric porcelain mosaic is unique yet simplistic enough to integrate into any design, ranging from traditional style renovations to modern home projects. Its impervious and frost-resistant features make this an ideal choice for indoor and outdoor installations, including backsplashes, bathrooms, showers, kitchens, and fireplace facades. Tile is the better choice for your space. This tile is made from natural ingredients, making it a healthy choice as it is free from allergens, VOCs, formaldehyde, and PVC.
- 8.6 square feet, 10 pieces per case. Case weight is 18.15 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.25 in. width x 11.88 in. length x 0.24 in. thick mesh-mounted mosaic
- Glazed, slightly textured finish with a low sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has no available COF wet rating. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
Spiral Black and White Porcelain Floor and Wall Tileby Merola Tile(16)
$17.44/sq ft.
Offering a mosaic look, our Spiral Black and White Porcelain Floor and Wall Tile features a smooth, mixed finish, providing decorative appeal that adapts to a variety of stylistic contexts. With its impervious, frost-resistant features, this mosaic is an ideal selection for both indoor and outdoor commercial and residential installations, including kitchens, bathrooms, backsplashes, showers, hallways, entryways, patios and fireplace facades. This tile is a perfect choice on its own or paired with other products in the Spiral Collection. Tile is the better choice for your space!
- 11.3 square feet, 10 pieces per case. Case weight is 19.22 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 12.63 in. width x 12.63 in. length x 0.22 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a mixed finish and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
11.8"x11.8" Glazed Porcelain Mosaic Barcelona 1" Square Glossy Olive Greenby The Mosaic Factory
$16.87/sq ft.
Free Shipping
Set of 60 sheets
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
Shade Variation
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
This porcelain mosaic tile from The Mosaic Factory is sophisticated, stylish, and suitable for any wall application, including but not limited to kitchen backsplashes, bathrooms, fireplaces, and pools. Sheets of tile are backed on mesh for easy installation. Glossy tiles can also be installed on bathroom floors (not shower floors) and other low traffic residential area's. Matte tiles can also be used on residential shower floors. Slip resistant tiles (The Mosaic Factory London series) can also be used in commercial high traffic areas like entrances, restrooms, and kitchen floors. The tiles can also be peeled off the mesh and installed individually, mixed with other colors.
Product Specifications
- Color: Olive Green
- Material: Porcelain
- Surface: Glossy
- Individual tile size (WxH): 1"x 1"
- Sheet size (WxH): 11.8"x 11.8" (0.97 sq. ft.)
- Thickness: 5 mm
- Grout joint: 2.5 mm
- Sheet backing: Mesh - ready for installation
- Impervious to liquids and vapors
- Resistant to fading, staining, and discoloration
- Shade variation: V1 - Uniform Appearance
- PEI rating: PEI 2 - Light Traffic
It is highly recommended to order a sample. Order multiple samples of the same product if it is a product with high shade variation. Sample is a cut piece of a sheet for color and texture reference. Samples are non returnable and non refundable.
When measuring your project and ordering the product quantity make sure you order at least 10% extra for cuts, trimming, damaged pieces, and future repairs The installation is similar to the installation of wall tiles.
Shade Variation
V1 - Uniform Appearance - Differences among pieces from the same production run are minimal V2 - Slight Variation - Clearly distinguishable differences in texture and/or pattern within similar colors V3 - Moderate Variation - While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example 'that little bit of color' on one piece of tile may be the primary color on the next pieces. V4 - Substantial Variation - Random color differences from tile to tile, so that one tile may have totally different colors from that of other tiles. Thus the final installation will be unique.
PEI Rating
PEI is a measurement of the “abrasion resistance” of a tile, meaning how much “rubbing” does it take to physically impact the look of the tile. The test is scored on a scale and each value represents a durability to withstand increasingly more demanding traffic. PEI 1, Very Light Traffic - These tiles can be used on all indoor wall applications, for countertops such as bathrooms, and very light traffic residential bathroom floors. These tiles are not recommended for any area that will have any constant or heavy floor traffic. We do not recommend these to be used on floors at all. PEI 2, Light Traffic - These tiles can be used on all indoor wall applications, interior countertops applications and light traffic residential bathroom floors. These tiles should not be used in areas such as kitchens, entry ways, stairs or areas with heavy traffic. We recommend these only to be used on floors were you would normally walk barefoot / without shoes.
You have searched for Porcelain Fireplace Tiles and this page displays the best product matches we have for Porcelain Fireplace Tiles to buy online in April 2024. We carry millions of home products with free shipping from furniture and decor to lighting and renovation. If you can’t find the product you want in the search results for Porcelain Fireplace Tiles, you can try refining your search. Houzz: a premium shopping experience for all of us.