Bathtubs

The pSpace skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 54" width is perfect for small baths where a tub is desired and is an excellent replacement for existing 54" tubs for remodeling purposes. In many cases the smaller size allows for replacing an existing shower stall with a full tub to convert your bathroom to a full bath. The heavy acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easy with mild soap and water, no scrubbing or harsh chemical cleaners required. The one piece molded skirt has a smooth panel for a clean, smooth and simple tub design. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSpace tub provides a generous rectangular tub opening with a 13.5" water depth and an integral tile flange for a leak free installation. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The pSpace skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easy with mild soap and water, no scrubbing or harsh chemical cleaners required. The one piece molded skirt has a smooth panel for a clean, smooth and simple tub design. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSpace tub provides a generous rectangular tub opening with a 13.5" water depth and an integral tile flange for a leak free installation. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The OVO skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a designer panel for a modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 66" size is longer than the standard width for residential tubs allowing additional space in the bath and frequently used for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The OVO tub provides a generous rectangular tub opening with a 13.5" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The GRACE acrylic free standing tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 81" X 31" size is large for a free standing tub allowing for ample space in the bath while giving your bath the unique design statement only a free standing bath can offer. The free standing style provides a clean and efficient use of space in your master bath allowing for an open environment unrestricted by walls and barriers. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The GRACE tub has a convenient center drain configuration, a 12.5" water depth, with a unique modern oval slipper design. The GRACE tubs are available in 16 vibrant exterior colors to highlight or coordinate your bath. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The OVO acrylic Undermount tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 57.5" size is a convenient undermount size allowing for ample space in the bath and frequently used for new construction or remodeling undermount applications. The undermount style mounts under the tub deck to provide a clean and efficient appearance and removes any barrier from stepping down into the tub. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The OVO tub has a convenient end drain configuration and a 13.5" water depth in the large rectangular interior. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The PRO skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a designer panel for a modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 66" size is longer than the standard width for residential tubs allowing additional space in the bath and frequently used for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The PRO tub provides a generous sculpted tub opening with molded arm rests and a 12.5" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The pCHI skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy-formed acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 60" width is perfect for bath remodels or new construction while providing a deep and luxurious bathing area. The heavy acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. The one-piece molded skirt has a simple clean design to enhance the tub appearance. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The CHI tub provides a generous rectangular tub opening with a 17.63" water depth and an integral tile flange for a leak-free installation. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pSPACE skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 54" width is perfect for small baths where a tub is desired and is an excellent replacement for existing 54" tubs for remodeling purposes. In many cases, the smaller size allows for replacing an existing shower stall with a full tub to convert your bathroom to a full bath. The heavy acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. The one-piece molded skirt has a smooth panel for a clean, smooth and simple tub design. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSPACE tub provides a generous rectangular tub opening with a 13.5" water depth and an integral tile flange for a leak-free installation. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The PRO skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The PRO tub provides a generous contoured tub opening with molded armrests and a 13" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The CHI acrylic drop-in tub from Valley Acrylic is attractive, durable, functional, and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 60" size is a convenient size allowing for ample space in the bath and is frequently used for new construction or remodeling drop-in applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The CHI tub has a convenient end drain configuration and a 17.5" water depth in the large rectangular interior. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The JUSTINIAN acrylic free standing tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 55" X 29" size is compact for a free standing tub yet allows for ample space in the bath while giving your bath the unique design statement only a free standing bath can offer. The JUSTINIAN tub has a reinforced faucet deck at one end allowing for a deck mounted roman tub faucet installation, a floor standing faucet would not be required. The free standing style provides a clean and efficient use of space in your master bath allowing for an open environment unrestricted by walls and barriers. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The JUSTINIAN tub has a convenient end drain configuration, a 15" water depth, with a unique modern rectangular design. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The PRO skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a designer panel for a modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The PRO tub provides a generous contoured tub opening with molded armrests and a 12.5" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pSPACE skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. The one-piece molded skirt has a smooth panel for a clean, smooth and simple tub design. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSPACE tub provides a generous rectangular tub opening with a 14.25" water depth and an integral tile flange for a leak-free installation. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The OVO skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a designer panel for a modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The OVO tub provides a generous rectangular tub opening with a 13.5" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pCHI skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The one-piece molded skirt has a designer panel for a modern design to enhance the tub appearance and an integral tile flange makes installation simple. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pCHI tub provides a generous rectangular tub opening with a 17.63" water depth. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The CHI acrylic Undermount tub from Valley Acrylic is attractive, durable, functional, and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 57.5" size is a convenient undermount size allowing for ample space in the bath and is frequently used for new construction or remodeling undermount applications. The undermount style mounts under the tub deck to provide a clean and efficient appearance and removes any barrier from stepping down into the tub. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The CHI tub has a convenient end drain configuration and a luxurious 17.75" water depth in the large rectangular interior. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The CHI acrylic drop-in tub from Valley Acrylic is attractive, durable, functional, and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 60" size is a convenient size allowing for ample space in the bath and is frequently used for new construction or remodeling drop-in applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The CHI tub has a convenient end drain configuration and a 17.5" water depth in the large rectangular interior. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The CHI acrylic drop-in tub from Valley Acrylic is attractive, durable, functional, and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 60" size is a convenient size allowing for ample space in the bath and is frequently used for new construction or remodeling drop-in applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The CHI tub has a convenient end drain configuration and a 17.5" water depth in the large rectangular interior. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The STARK skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 72" size is longer than the standard width for residential tubs allowing additional space in the bath and frequently used for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The STARK tub provides a generous sculpted tub opening with molded arm rests and a 13.75" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pCHI skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The one-piece molded skirt has a designer panel for a modern design to enhance the tub appearance and an integral tile flange makes installation simple. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pCHI tub provides a generous rectangular tub opening with a 17.63" water depth. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The CHI acrylic Undermount tub from Valley Acrylic is attractive, durable, functional, and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 57.5" size is a convenient undermount size allowing for ample space in the bath and is frequently used for new construction or remodeling undermount applications. The undermount style mounts under the tub deck to provide a clean and efficient appearance and removes any barrier from stepping down into the tub. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The CHI tub has a convenient end drain configuration and a luxurious 17.75" water depth in the large rectangular interior. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The PRO acrylic drop in tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 66" size is larger than a standard tub allowing for ample space in the bath and frequently used for new construction or remodeling drop in applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The PRO tub has a sculpted large intgerior with molded arm rests and a 12.5" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The PRO skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 66" size is longer than the standard width for residential tubs allowing additional space in the bath and frequently used for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The PRO tub provides a generous sculpted tub opening with molded arm rests and a 12.5" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pOVO skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The one-piece molded skirt has a designer panel for a modern design to enhance the tub appearance and an integral tile flange makes installation simple. The 66" size is considered an oversized width for residential tubs making this product perfect for upgrading your tub or bath to a larger soaking tub. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pOVO tub provides a generous rectangular tub opening with a 13.5" water depth. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The OVO acrylic drop in tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 60" size is a convenient size allowing for ample space in the bath and frequently used for new construction or remodeling drop in applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The OVO tub has a convenient end drain configuration and a 13.5" water depth in the large rectangular interior. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pPRO skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The one-piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation simple. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pPRO tub provides a generous contoured tub opening with molded armrests and a 13" water depth. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pPRO skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The one-piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation simple. The 66" size is considered an oversized width for residential tubs making this product perfect for upgrading your current tub or new construction. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pPRO tub provides a generous contoured tub opening with molded armrests and a 13" water depth. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pSTARK skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The one-piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation simple. The 72" size is considered an oversized width for residential tubs making this product perfect for upgrading your tub or for new construction. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSTARK tub provides a generous rectangular tub opening with molded armrests and a 14" water depth. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pSPACE skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 54" width is perfect for small baths where a tub is desired and is an excellent replacement for existing 54" tubs for remodeling purposes. In many cases, the smaller size allows for replacing an existing shower stall with a full tub to convert your bathroom to a full bath. The heavy acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. The one-piece molded skirt has a smooth panel for a clean, smooth and simple tub design. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSPACE tub provides a generous rectangular tub opening with a 13.5" water depth and an integral tile flange for a leak-free installation. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pSPACE skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. The one-piece molded skirt has a smooth panel for a clean, smooth and simple tub design. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSPACE tub provides a generous rectangular tub opening with a 14.25" water depth and an integral tile flange for a leak-free installation. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

Above Floor Rough-In tub will allow for extra space under the tub to move drain plumbing to the appropriate location to match the tub outlet. This application is excellent for remodeling where the old drain is in a slab floor, or where floor joists would need to be cut to move the drain. Please see the specification sheet for more details and specifications on the tub. The pSTARK skirted acrylic tub from Valley Acrylic is attractive, durable, functional, and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The one-piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation simple. The 72" size is considered an oversized width for residential tubs making this product perfect for upgrading your tub or for new construction. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The pSTARK tub provides a generous rectangular tub opening with molded armrests and a 14" water depth. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The STARK skirted acrylic tub from Valley Acrylic is attractive, durable, functional and easy to install in under a day. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The one piece molded skirt has a smooth front panel for a simple modern design to enhance the tub appearance and an integral tile flange makes installation a simple. The 60" size is considered the standard width for residential tubs making this product perfect for new construction or remodeling applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The STARK tub provides a generous rectangular tub opening with molded armrests and a 13.75" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The BORDEAUX acrylic drop in tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The Bordeaux tub features an attractive and generous sculpted interior and a convenient faucet deck for ease and convenience in mounting the faucet. The extra large 70" size is longer than the standard width for residential tubs allowing additional space in the bath and frequently used for new construction or remodeling drop in applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The BORDEAUX tub has a convenient central drain and a luxurious 17" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The LAVISH acrylic free standing tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 70" X 33" size is large for a free standing tub and allows for ample space in the bath while giving your bath the unique design statement only a free standing bath can offer. The LAVISH tub has a reinforced faucet deck at one side allowing for a deck mounted roman tub faucet installation, a floor standing faucet would not be required. The free standing style provides a clean and efficient use of space in your master bath allowing for an open environment unrestricted by walls and barriers. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The LAVISH tub has a convenient Center drain configuration, a 14.75" water depth, with a unique modern oval design. The LAVISH tub is available in 16 vibrant exterior colors to accentuate or complement your bath design. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The CHI acrylic Undermount tub from Valley Acrylic is attractive, durable, functional, and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequently to maintain a warm bath. The 57.5" size is a convenient undermount size allowing for ample space in the bath and is frequently used for new construction or remodeling undermount applications. The undermount style mounts under the tub deck to provide a clean and efficient appearance and removes any barrier from stepping down into the tub. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners are required. This easy-to-clean nonporous acrylic surface resists the growth of mold, mildew, and mineral deposits providing a safe and hygienic bathing fixture for your family. The CHI tub has a convenient end drain configuration and a luxurious 17.75" water depth in the large rectangular interior. Valley Acrylic, a Woman-Owned Business, creates handmade products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.

The PRO acrylic drop in tub from Valley Acrylic is attractive, durable, functional and easy to install. Valley Acrylic tubs are built using a proprietary layering technology to reinforce and insulate the tubs far better than other tubs available today. The process starts with a heavy acrylic sheet with a resin and fiberglass mixture backing then a thick layer of real Canadian wood is applied to the tub which is then coated with another layer of the proprietary resin. This gives the tub better heat retention and insulation than other acrylic, gel coat, or steel tub products on the market while giving unparalleled strength and rigidity. The proprietary layered technology insulates the tub rather than absorbing heat from the water like cast iron which saves energy and water by retaining more heat and making the addition of hot water less frequent to maintain a warm bath. The 60" size is a convenient size allowing for ample space in the bath and frequently used for new construction or remodeling drop in applications. The heavy 3mm thick acrylic layer provides a high gloss surface that is scratch, fade, and crack resistant providing a clean and attractive appearance through the entire long life of the tub. The vibrant surface of the Acrylic tubs cleans up easily with mild soap and water, no scrubbing or harsh chemical cleaners required. This easy to clean nonporous acrylic surface resists the growth of mold, mildew and mineral deposits providing a safe and hygienic bathing fixture for your family. The PRO tub has a sculpted large intgerior with molded arm rests and a 12.5" water depth. Valley Acrylic, a Woman Owned Business, creates hand made products that are eco-friendly and manufactured in a Certified Zero Waste factory in Mission, BC, Canada.