FREE shipping on orders over $49!* Details
"Stained Trim Painted Door" – search in Products
Sort by:
Price
17 Results
Best Seller
General Finishes Arm-R-Seal Topcoat Semi Gloss Gallonby General Finishes(705)
$88
Arm-R-Seal topcoats are made with only the highest quality urethane resin, making them extremely durable and long lasting. They are formulated to be wiped on with a clock or applied with a foam brush, thus eliminating drops and sags. They penetrate to provide deep down protection and that "natural" look.
Minwax® 40917 Water Based Wipe On Poly Durable Finish, 275 VOC, Clear Satin 1-Ptby Minwax Co Inc(30)
$39
Free Shipping
Minwax® Water Based Wipe-On Poly is a durable, clear finish that combines polyurethane protection with classic, hand-rubbed beauty. Applied with a cloth - no need to worry about drips and brush marks. Great for furniture, railings and trim. Easy water clean-up.
*Furniture, cabinets, woodwork, trim, doors; small floor touch-ups (scratches).
Can I use Minwax® Wipe-On Poly on floors?
*Minwax® Wipe-On Poly provides a durable layer of topcoat protection but it is thinner than regular polyurethanes. It can be used on floors to touch up small areas that are worn or scratched. For new floors or floors that need to be refinished, Minwax® Fast-Drying Polyurethane or Minwax® Super Fast-Drying Polyurethane for Floors should be used.
Can Minwax® Wipe-On Poly be applied over Minwax® Wood Finish™ or other stains?
*Yes. Minwax® Wipe-On Poly is a great way to protect finished or unfinished wood. Be sure to allow wood that has been stained to dry completely before topcoating with Minwax® Wipe-On Poly.
Should Minwax® Wipe-On Poly be sanded between coats?
*Yes. A light sanding with very fine sandpaper (#220) or fine steel wool will remove any fine particles of dust that may have settled on the finish while it was wet. Allow Minwax® Wipe-On Poly to dry 2-3 hours before applying the next coat. If a third coat is desired, repeat the same procedure.
- Size: 1 Pt
- Hand rubbed beauty with polyurethane protection
- Easy water clean-up
- Applied with a cloth - no need to worry about drips and brush marks
- Fast-drying
- Great for furniture, railings and trim.
Specifications
*Sheens: Satin- Application Tool: Lint-free cloth
- Location: Interior wood surfaces
- Recoat: After 2-3 hours
- Dry Time: 24 hours before normal use
- Cleanup: Mineral spirits or paint thinner
- Coats: 2-3
- VOC Content: Maximum VOC of 275 g/L.
*Furniture, cabinets, woodwork, trim, doors; small floor touch-ups (scratches).
- FAQ's
- What is the benefit of using Minwax® Wipe-On Poly versus a traditional polyurethane?
Can I use Minwax® Wipe-On Poly on floors?
*Minwax® Wipe-On Poly provides a durable layer of topcoat protection but it is thinner than regular polyurethanes. It can be used on floors to touch up small areas that are worn or scratched. For new floors or floors that need to be refinished, Minwax® Fast-Drying Polyurethane or Minwax® Super Fast-Drying Polyurethane for Floors should be used.
Can Minwax® Wipe-On Poly be applied over Minwax® Wood Finish™ or other stains?
*Yes. Minwax® Wipe-On Poly is a great way to protect finished or unfinished wood. Be sure to allow wood that has been stained to dry completely before topcoating with Minwax® Wipe-On Poly.
Should Minwax® Wipe-On Poly be sanded between coats?
*Yes. A light sanding with very fine sandpaper (#220) or fine steel wool will remove any fine particles of dust that may have settled on the finish while it was wet. Allow Minwax® Wipe-On Poly to dry 2-3 hours before applying the next coat. If a third coat is desired, repeat the same procedure.
- Directions
- Surface must be dry and free of old finishes in poor condition, wax, grease, polish, dirt or other foreign matter
- Sand to obtain a smooth, uniform surface. Remove all dust with a damp cloth
- If desired, apply stain, such as Minwax® Wood Finish™ Stain, to unfinished interior wood surfaces
- Shake Water Based Wipe-On Poly container well
- Put liberal amount Water Based Wipe-On Poly on a clean, soft, lint-free cloth and rub into the wood
- Allow to dry at least 2-3 hours. Sand entire surface lightly with fine sandpaper (220 grit). Remove all sanding dust
- Apply a second coat in the same manner as the first. A third coat is recommended. Repeat Step 6 before application
- Allow final coat to dry 24 hours before normal use.
Dap® 18542 Alex Flex™ Premium Molding & Trim Sealant, 10.1 Oz, Whiteby Dap Inc.
$19
Free Shipping
Dap® Alex Fkex™ Premium Molding & Trim Sealant is specifically formulated for use on molding & trim applications. It delivers maximum adhesion & flexibility for a crack proof seal. It provides easy tooling, low odor, water clean-up & outstanding paintability. In just 30 minutes, the sealant forms a tough outer skin that’s dry enough to paint over with latex or oil based paints, thereby saving time since the job is finished faster. It provides a long-lasting, durable seal that will not shine through paint. Ideal for achieving a professional look with paint projects when sealing gaps around windows, doors, trim, crown molding, chair rails and baseboards. Cured sealant is mold and mildew resistant. Indoor use. Exceeds ASTM Specification C920, Class 12.5.
- Size: 10.1 Ounce
- Color: White
- Crack proof
- Maximum flexibility and adhesion
- Outstanding Paintability in 30 Minutes
- Won’t shine through paint
- Cured sealant is mold and mildew resistant
- Easy water clean-up
- Waterproof seal
- For indoor use
- Ideal for wood and PVC molding
- Exceeds ASTM C920, Class 12.5
- Made in the USA.
Suggested Uses:
Ideal for Caulking and Sealing:
- Windows and doors
- Crown molding
- Chair rails
- Molding
- Trim
- Vents
- Baseboards
- Corner joints
- Other gaps and cracks.
Outstanding Adhesion to:
- Wood
- Metal
- Brick
- Aluminum
- Glass
- Concrete
- Vinyl
- Masonry
- Most plastics
- Plaster and drywall
- Stucco
- Stone
- Painted surfaces
- Composite Wood
- PVC Molding.
Clean Up:
*Clean up excess uncured sealant with a damp cloth or sponge before it skins over. Wash hands with warm water and soap. Dried material must be cut or scraped away.Loctite® 1507600 Polyseamseal Acrylic Caulk with Silicone, 10 Oz, Whiteby Henkel Corporation(3)
$19
Free Shipping
Loctite® Polyseamseal Acrylic Caulk with Silicone is a high quality acrylic caulk with added silicone to give extra durability and adhesion. Its fast set formulation is paintable within 30 minutes and provides a flexible seal that locks out air, moisture, dirt, dust and insects.
- 10 Oz
- White
- Paintable in 30 minutes
- Quick completion of project
- Ultra low VOC content, Qualifies for LEED® points
- Water-based adhesive
- Non-flammable and environmentally friendly
- Easy cleanup with water (uncured adhesive)
- Eliminates the use of harsh cleaning chemicals
- Low odor, Ideal for indoor projects – no strong solvent odor.
Directions:
Safety Precautions:
*Wear gloves.Preparation:
*The temperature of the product, the surfaces and the working area must be above 40°F (5°C). For best performance, apply sealant at 70°F (21°C). Ensure surfaces to be sealed are clean, dry, structurally sound and free of dust, grease, oil, and other foreign contaminants. Cut off tip of cartridge at a 45° angle to desired bead size (3/8' recommended). Puncture inside seal of cartridge.Application:
*Using a caulking gun, apply steady trigger pressure forcing the sealant onto the surface and into the joint. Maximum joint size should not exceed 5/8' (15.9 mm) x ½' (12.7 mm). A width to depth ratio of 2:1 should be maintained. Smooth bead with a wet finger or tool. Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water. (Note: Clear sealant will extrude white and will turn clear as it dries.)Cleanup:
*Clean tools and uncured adhesive residue immediately with warm water and soap. Cured adhesive may be carefully cut away with a sharp-edged tool.Recommended For:
- Sealing gaps or cracks around windows, door frame, baseboards, walls and molding
- Bonds well to wood, drywall, plaster, metals, brick, concrete, masonry and painted surfaces.
Not Recommended For:
- Do not use for architectural joints, joints subject to heavy abrasion or wear, or tuck pointing
- Not suitable for underwater applications, permanent water immersion or for aquariums
- Do not use on mirrors and metals that will corrode
- Do not apply outdoors when rain or freezing temperatures are expected within 24 hours.
GE M90016 Window & Door Supreme Silicone Sealant, Clear, 9 Ozby Momentive Perform Material(20)
$24
Free Shipping
GE Supreme Silicone Slashes Wait Times, Helps Block Weather and Water. GE Supreme Silicone caulk is making life even easier for consumers and pros with shorter wait times and outstanding durability. In as little as 30 minutes, this caulk is ready for water exposure to get the job done faster, save time and money, and still provide the same reliable protection.
- 10.1 Oz
- Clear
- 30-minute rain-ready
- 100% silicone window & door supreme sealant
- 2 times the stretch of other top selling silicones
- 100% waterproof caulk that can withstand exposure to all weather conditions
- Flexible & shrink/crack proof
- With +/ 50% joint movement capability
- Can withstand the extreme expansion or contraction that can occur with weather fluctuations or movement from a home settling
- Non paintable
- Typical uses includes windows, doors, siding, trim, molding, baseboards, vents, around wires/pipes & other attic/basement applications
- Adheres to most wood, metal, vinyl siding, masonry, brick, concrete, drywall/plaster, glass & plastic.
Black Jack 5576-1-30 Premium Silicone Waterproofing Roof Coating, White, 5-Galby Gardner-Gibson(75)
$436
Free Shipping
Black Jack® 100% Silicone Roof Coating is formulated to deliver superior waterproofing protection to your roof surface. This rubberized coating, forms a chemical bond to the roof surface which provides incredible adhesion and long term waterproofing protection. This product will also withstand areas that pond water, and will hold up in areas where other coatings will fail. The coating dries to a bright white finish, which keeps roof surfaces cooler and has excellent UV resistance. Finally, this high solids formula is quick setting, low odor and can be applied in a wide range of temperatures.
- Size: 5 Gallon
- Color: White
- Premium silicone waterproofing coating
- Ideal for flat roofs
- Best waterproof coating
- High solids formula
- Withstands ponding water
- Rain safe in 60 minutes.
Preparation:
- All surfaces should be clean. Treat rust with proper primer. If mildew is present, surfaces should be cleaned with a proper bleach solution (one part bleach to 2 parts water). To qualify for warranty, it is necessary to power wash (using a wide spray tip) all surfaces before applying this roof coating. A peel test sample should be done on all roofs to verify proper long term adhesion. Applications to TPO, EPDM and Hypalon require a special process, call for more info. Perform Peel Adhesion Test (ASTM D903-98) before applying to any single ply roofing surface.
Application:
- DO NOT apply if heavy dew or rain is expected within 4 hours. Surface and air temperatures must be between 40 °F and 99 °F. Apply on a clear, dry day with a max humidity level of 70%. Use a quality 3/4”nap paint roller. Make sure the morning dew has completely dried on the roof before applying. Step 1. Clean & dry surface. Step 2. Repair cracks and damaged areas. Step 3. Coat surface.
Coating Application Options:
- The recommended application is for 2 coats, applying each coat at 1 gallon per 100 sq/ft. If one coat application is desired, apply 1 coat at 50 sq/ft per gallon. Finished coverage will be the same, covering 250 sq/ft of roof surface.
Coverage:
- 5 gallons will cover approximately 250 sq/ft of roof.
- NOTE: Do not apply to roofs over 110 °F.
Clean-Up:
- Clean tools immediately with mineral spirits.
Precautions:
- For exterior use only. Protect building inlets from product vapors or fumes. DO NOT allow product to freeze. Protective clothing, gloves and eyewear should be used during application of these products. When transporting this product, ensure that lid is tight and pail secure and upright. DO NOT allow pail to tumble as this may cause lid to loosen and leakage to occur. Do not transport on passenger seats or inside the passenger compartment of any vehicle. Store product in the cargo area of vehicle, and secure over protective cloths to prevent damage due to accidental spills. For longest life, store in controlled environment, 45 °F-80 °F. DO NOT store in direct sunlight. DO NOT store at temperatures above 99 °F. Close container after use. DO NOT reuse empty containers. Ponding water creates excessive weight on roofs and may compromise structural integrity leading to a potential collapse hazard. Always follow the National Roofing Contractors Association guidelines to remove ponding water from roof surfaces. Slip Warning: Use extreme caution when walking or working on silicone coated surfaces. Surface is extremely slippery and can create a fall hazard resulting in injury or death. Use OSHA approved fall protection when on roof surfaces.
Drylock 20915 Clear Masonry Waterproofer, 5 Gallonby United Gilsonite Labs(2)
$266
Free Shipping
Unlike ordinary paint that simply adheres to a surface and can be forced off by incoming water pressure, DRYLOK Clear Masonry Waterproofer actually penetrates the pores in that surface, bonding to the masonry and creating an impenetrable barrier. Waterproof interior, exterior, above or below grade walls. DRYLOK Clear Masonry Waterproofer is also perfect for floors, basements, retaining walls, decorative brick and stone facades, and more.
- Size: 5 gallon
- First clear (non-pigmented), abrasion-resistant, high-gloss waterproof coating approved for floor and wall applications
- Patent-pending formula
- Creates a moisture vapor barrier on floors as a finish coat or under latex paint or as a primer prior to applying floor coverings
- Protects against 98 mph wind driven rain on decorative vertical surfaces
- Reduces radon gas penetration
- Stop water – withstands 4 PSI
- Not intended for use with vehicle traffic.
Specifications
- Dry time: 2 hours
- Coats: minimum of 2
- Recoat time: 4 hours
- Coverage: 90-100 square feet per gallon
- Finish: Clear, high-gloss.
Grout Finish FRDGF06-DARK-BROWN Ultimate Grout Sealer Kit, Dark Brownby R & D Chemical Solutions Ltd(2)
$33
Free Shipping
Rejuvenate your wall and floor grout. Grout Finish is the ultimate grout sealer, providing a long lasting seal while achieving perfect color uniformity. Grout Finish is compatible with either sanded or unsanded cement grout joints. Grout finish in kit is a water-based penetrating grout stain and sealer that is designed to revitalize and restore desired color to your grout. Grout Finish seals to form a protective barrier against organic food stains, grease, soil, and other forms of foreign deposit. For use on cement based grouts on showers, counters and floors.
- Color: Dark Brown
- Providing a long lasting seal while achieving perfect color uniformity
- Compatible with either sanded or un-sanded cement grout joint
- Can also be used on epoxy grouts
- Use on showers, countertops, backsplashes and floors
- Cover approximately coverage 50-300 sq.ft.
Includes:
*8 ounce bottle of grout finish- Easy applicator wheel
- Brush applicator for hard to reach areas
- Sponge
Reflectix® CF50550 Foam Sill Sealer, White, 5.5" x 50'by Reflectix Inc(2)
$20
Free Shipping
Reflectix® Sill Sealer is designed to reduce air leakage between the foundation wall and the sill plate. It can additionally be used to seal around window and door frames. The product is applicable for residential and commercial construction, slab on grade, and in crawl spaces or basements. The Reflectix® Sill Sealer is available through Contractor Sales Groups.
- Size: 5.5" x 50'
- Color: White
- Made from ribbed polyethylene foam (total thickness 3/16")
- Designed to reduce air leakage between the foundation wall and sill plate
- Mildew and water resistant
- Also provides protection against sill plate rot
- Roll.
Henry® Company HE289046 Elastocaulk Roof Sealant, White, 1 Gallonby Henry Company(94)
$76
Free Shipping
Henry 289 White Roof Sealant is a white, elastomeric acrylic patching compound specially formulated for repairing and preventing roof leaks prior to coating with an acrylic reflective coating. Henry 289 ElastoCaulk will not crack, craze, or lose adhesion when applied as directed to a smooth, clean, sound roof surface.
- 1 gallon
- Solar-Flex
- Applies to dry or damp (not wet) surfaces
- Applies by brush or trowel for fast application
- Coats with white or tinted acrylic coating
- Doesn't "bleed through" reflective coatings
- Skins over quickly – no delays
- Allows for soap and water cleanup
- Color: White.
Quick Roof UBW410 Ultra Bond Instant Self-Adhesive Roof Repair, 4"x10', Whiteby Cofair Products Inc.(4)
$28
Free Shipping
Quick Roof Ultra Bond Black with Steel-Loc Adhesive is a self-adhesive, peel and stick, Black TPO that permanently repairs: EPDM, TPO, Hypalon,Metal, Modified Asphalt, Vinyl, Fiberglass, Aged & Rigid PVC, OSB, Rigid Extruded Polystyrene, Wood, and Tile. Quick Roof Ultra Bond Black is not to crack, harden or shrink.
- 4" x 10'
- White Ultra Bond with Steel-loc adhesive
- Instant self-adhesive roof repair
- Stops leaks
- Just peel off the release paper & press in place
- Not to crack
- Harden or shrink in addition to instantly stopping leaks.
- EPDM
- TPO
- Hypalon
- Metal
- Modified Asphalt
- Vinyl
- Fiberglass
- Aged & Rigid PVC
- OSB
- Rigid Extruded Polystyrene
- Wood
- Tile.
Liquid Nails® DWP-24 Interior Grade Drywall Adhesive, 28 Ozby PPG Industries Inc.(57)
$20
Free Shipping
This latex-based wall adhesive is specially formulated for interior drywall construction and correcting minor framing irregularities. It acts fast, bonds strong and buffers sound.
- Size: 28 fl. oz.
- Fast grab for easy installation
- Moisture proof
- Minimizes nail popping
- Reduces sound transmission
- Contributes to LEED® certification
- Contributes toward NAHB National Green Building Standard™ certification of the structure
- Exceeds ASTM specification C-557
Recommended For:
- Bonding drywall to wood, studding, rafters, galvanized steel, ceiling systems, aluminum, drywall, other surfaces and foamboard.
Not Recommended For:
- Exterior wall construction.
Coverage:
- Using a 1/4" (.64 cm) bead: 28 fl. oz. cartridge covers 88 lineal ft.
Max VOC:
- 32 GPL.
Henry® Company HE287SF046 Elastomeric Roof Coating, White, 1 Gallonby Henry Company(2)
$71
Free Shipping
Henry 287 SF – Solar Flex® White Elastomeric Coating is a premium, elastomeric, water-based acrylic latex coating. When properly applied, it is highly resistant to disbonding, chalking, mildew, and discoloration.
- 1 gallon
- Color: White
- Elastomeric roof coating
- Meets the energy star guidelines for energy efficiency
- Cool roof rating council rated product id - 0620-0007
- Contains rich, top-quality, non-fibered elastomeric
- Provides bright white with excellent "hide”
- Can be brush-, roller- or spray-applied
- Reflects over 85% of sun's heat and U.V.; prolongs roof life
- Lowers roof and interior temperatures; reduces air conditioning costs
- Resists mildew in humid climates.
3M® 1000NS Fire Barrier Water Tight Sealant, Light Gray, 10.1 Ozby 3M(3)
$38
Free Shipping
The 3M Fire Barrier Water Tight Sealant 1000 NS is a ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. The water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.
- Meets UL Water Leakage Test, W Rating (Class 1 requirements)
- Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
- Offers compression and extension capability of ±31% for dynamic and static construction joints
- Fire resistance tested for construction joint (including curtain wall) systems in accordance with ASTM E 1966 (UL 2079), ASTM E 2307
- Excellent caulk rate and sealant can be applied with conventional caulking equipment
- Non-slump, halogen-free formula provides strong adhesion
- Exceptional weatherability for durability during construction
- Minimizes noise transfer (STC-Rating of 56 when tested in STC 56-rated wall assembly)
- Formulated as a re-enterable and repairable solution
- Sealant is paintable with primer.
Specifications
- Size: 10.1 Oz
- Color: Light Gray
- Product Type: Sealant
- Smoke Seal: Yes.
HENRY® 12234 Wall Base Repair Adhesive, 6 Ozby W.W. Henry Company
$24
Free Shipping
Designed for the repair/reinstallation of a small area of either rubber or vinyl wall base.
- Size: 6 Oz
- Squeeze bottle
- Wall base repair adhesive
- Designed for the repair/reinstallation of a small area of either rubber or vinyl wall base.
DAP 25192 Weldwood Multi-Purpose Ceramic Tile Adhesive, White, 1 Gallonby Dap Inc.(17)
$42
Free Shipping
Use to install ceramic and mosaic tiles on walls, floor and counter tops. Easy to spread, quick-grab formula requires no bracing. Provides excellent water resistance. Nonflammable and easy water clean-up.
- Size: 1 Qt
- Color: White
- Quick grab
- No slippage
- Water resistant
- Nonflammable- VOC compliant
- Exceeds ANSI 136
- 2 types I & II
- Provides excellent water resistance
- Nonflammable and easy water clean-up
- For interior use.
KST Coatings White Acrylic Patching Cement KS0085100-16by KST Coatings(2)
$59
Free Shipping
Patches tough leaks and won't run or sag. After application it retains its flexibility to resist cracking, peeling, and blistering. Stops leaks on damp dry surfaces. Formulated with durable acrylic resin and special reinforcing materials. Seals out water. Mildew-resistant. Blends in on existing white roofs. Recommended for patching cracks, seams, holes, and breaks around: Chimney flashings, air conditioners, parapet walls, vents, stacks, gutters, skylights, and metal seams. Soap and water clean up - while wet.
- No. KS0085100-16
- Container Size: 1 gal
- Actual Contents in Container: .9 gal
- Material: Durable Acrylic Resin & Special Reinforc
- Type: Damp Dry
- Color: White
- Package Quantity: 1
- Package Type: Can
You have searched for Stained Trim Painted Door and this page displays the best product matches we have for Stained Trim Painted Door to buy online in May 2024. We carry millions of home products with free shipping from furniture and decor to lighting and renovation. If you can’t find the product you want in the search results for Stained Trim Painted Door, you can try refining your search. Houzz: a premium shopping experience for all of us.