Block Tile and SpectraMetal Tile

Engraved Currents pattern - 30" H x 48" W.
Our backsplashes are made from top grade 304 stainless steel to prevent rust or corrosion. All edges are straight and smooth, and the backsplash can be adhered to any smooth surface using commercially available construction adhesives. Simple cleaning using any non-abrasive spray cleaner.

Brushed background pattern with Moroccan pattern - 24" H x 36" W.
Our backsplashes are made from top grade 304 stainless steel to prevent rust or corrosion. All edges are straight and smooth, and the backsplash can be adhered to any smooth surface using commercially available construction adhesives.

Brushed background with engraved Moroccan pattern - 24" H x 36" W.
Our backsplashes are made from top grade 304 stainless steel to prevent rust or corrosion. All edges are straight and smooth, and the backsplash can be adhered to any smooth surface using commercially available construction adhesives.

Our backsplashes are made from top grade 304 stainless steel to prevent rust or corrosion. All edges are straight and smooth, and the backsplash can be adhered to any smooth surface using commercially available construction adhesives. Simple cleaning using any non-abrasive spray cleaner.

BlockTile Ramp Edges without Loops are designed to work as a transition from concrete or other hard surfaces to BlockTile interlocking floor tiles. There are two types of ramp edges for BLOCKTILE loop-to-peg interlocking floor tiles: "Ramp Edges with Loops" and "Ramp Edges without Loops" The names refer to the loops on the long side of the ramp edge. Because the tiles are modular in nature, you have the option to select either type of edge for your installation. There is no right or wrong decision. However, depending on how you start your installation and the type of room in which you are installing the interlocking floor tiles, you may wish to consider selecting one versus the other. Most garage floor installations use ramp edges only on the entrance of the garage in order for the vehicles to smoothly transition from the concrete driveway to the interlocking tile floor. This is recommended in order to extend the life of the interlocking tiles and to minimize the movement of the floating floor. "BlockTile Ramp Edges without Loops are needed when the installation starting point is at the rear of the room being tiled (garage floor, patio floor, deck floor). This is because the floor tiles should be oriented so that the loops are pointing toward the opening of the room and the opposite corner from where you are beginning. If you are creating a custom sized mat, you will need both types of ramp edges plus corners. Just remember that two adjacent sides of the garage floor mat will have loops and the other two sides will NOT have loops. BLOCKTILE ramp edges may only be used with BLOCKTILE interlocking floor tiles. They will not interlock with any other brands. Due to differences resulting from various digital devices, please note that colors represented on your monitor may differ slightly from the actual interlocking floor tiles

• Set includes 12 edge pieces and 2 corner pieces
• Coverage: 12 linear ft.
• Multiple Colors Available
• UV Resistant
• Resists Salt, Oil and Grease
• Light Commercial and Residential
• Made in the USA