METechs Global Inc. Transitional Curtain Rods

High quality aluminum alloy tube with bottom weight bar. The profile of the tube is well engineered and made to work with motorized roll-up motor CL338T. This rod kit can also be used for regular manual pull up shade or blinds rods. The diameter of rod is 1-5/8" (40mm).
Note: this rod kit does not fit CL338H models! It works only with CL338T's or METechs CL825E's.

This item can be cut to any length. Just buy the next available longer rod than what you need.

The dual track system is made from two single tracks and dual mounting brackets. Curtains and sheers can be set up and operated either independently or grouped together. Each track can be set up to open/close from left to right, right to left, or center to both sides. Motor can be mounted on the left or right side. The dual track can be mounted anywhere on the ceiling (hardware included), or on the wall (dual brackets sold separately) with adjustable off wall distances between 0.25" to 3.25" for the inner track (usually used for sheers), and between 2.5" to 5.5" for the outer track (usually used for curtains).
This motorized curtain track system is designed for straight line windows, bay windows, 90 degree corner windows, and any customized curved windows. The CL200BT system consists of a remote, ceiling mount brackets, toothed drive belt, curtain carriers, motor, and selected size straight track. METechs has two types of standard curved track options to choose from ; which option you need depends on your window setup. The curved tracks come in 90 degree and 135 degree curves with 20?? (50cm) or 5"(12cm) radius. **Curved track sections are not included in this kit and need to be ordered separately.** The 135 degree curved track works for most bay windows and requires this straight track kit and two 135 degree sections. The 90 degree curved track works for corner window applications and requires this straight track kit and one 90 degree section. The motor power cord is about 3ft long and is designed to be plugged into your wall outlet. The power cord may also be hard wired into your electrical system if needed. The motor can be mounted on the left or right side. It can be operated by remote or timer, wall switch, any dry-contact relay controller, smartphone with an add-on hub, and voice-controlled by Google assistant or Amazon Alexa with an add-on hub (see our other Houzz listings for timer and wall switch or contact METechs for the optional hub).

Aluminum alloy tube with bottom bar is designed to work with tube motor CL338H. The rod kit can also be used for regular manual pull up shade or blinds rods. The diameter of rod is 1-5/8" (40mm). Note: these rods do not fit CL338T motor kit model! It works only with CL338H's and CL835's METechs motors.
The bar can be cut to any length. Just buy the next available longer rod than what you need.