Art3d LLC Metal Wall and Floor Tile

Art3d metal wall tiles are made of brushed aluminum with a durable scratch, splash and heat resistant polyurethane finish. Create a high end, professional look with these affordable tiles. With a peel and stick backing, these self-adhesive tiles transform a space with little work. These easy to cut tiles don't require spacers or grout and bend to create perfect corners with less cutting and no wasted off cuts. Lightweight tiles are easy to work with and allow maximum adhesion. Perfect for a bathroom or kitchen backsplash or feature wall. Each tile measures around 3-inches x 6-inches x 0.15-inches deep (75 x 150 x 4mm). Art3d brushed metal tile can be installed in minutes over a clean and sleek surface without any mess

If cutting tiles, one of the following tools will be needed:

• Jig saw or chop saw (recommended)
• Hack saw
• Hole saw or coping saw (for circular cuts or electrical outlet cutouts only).
• Number of Pieces Per 1 Quantity: 32
• Square Feet Per 1 Quantity: 4
• Individual Tile

• Easy DIY peel and stick Aluminum PVC Composite Tile/Sticker is made of an adhesive substrate topped with a PVC composite panel.
• The distressed wood surface add the timeless look of wood to your walls without the hassle of a contractor.

The tiles are thin and light, they can be installed in minutes over a clean and flat surface without any mess or specialized tools, and never crack with time.
They will remain on your walls for as long as you wish them to be. The tiles are resistant to the heat of stove tops and the humidity of bathrooms (do not use in shower).
For cutting, below tools are recommended

- Jig saw or chop saw (Top recommended)

• Hack saw
• Hole saw or coping saw (for circular cuts or electrical outlet cutouts only).

• Ideal surfaces to install Art3d peel and stick Metal Tiles
• Painted gypsum (after a 21-day curing time for fresh paint)

• Smooth ceramic tile
• Wall panel (acrylic)
• Wall linoleum
• Mirror
• Wallpaper

Art3d Peel and Stick Metal Backsplash Tile Sticker is made of Aluminum PVC Composite with self-adhesive substrate. It has the characteristics of high-impact, water and moisture proof, heat resistant, stain resistant, anti-scratch and easy to maintain. Aluminum mosaic tiles are a favorite among designers and architects worldwide because of their durability, clean and unobtrusive look and smooth structure. The glue, grout those hassles don't involved for installation, just peel and stick, cut with tin snips simply, it's typically designed for kitchen, bathroom, fireplace, living room, fireplace, stair riser etc. where requires a gorgeous and fast transformation.

• For cutting, below tools are recommended
• Jig saw or chop saw (Top recommended)
• Hack saw
• Hole saw or coping saw (for circular cuts or electrical outlet cutouts only).

• Below are some of ideal surfaces to install Peel and Stick Tiles:
• Painted gypsum (after a 21-day curing time for fresh paint)
• Smooth ceramic tile
• Wall panel (acrylic)
• Wall linoleum
• Mirror
• Wallpaper (if some corners are peeling, just peel them off and install over them).

Not recommended surfaces:

Dusty and Porous Surfaces:

• Stucco wall, brick wall, stone wall, unfinished wall (gypsum or plaster), unpainted plywood
• Uneven Surfaces and Walls with Reliefs (raised or textured) A dented, damaged surface or one with reliefs, like uneven ceramic backsplash tiles is not recommended