Please help! Sliding glass door

4 years ago

Just purchased a home that the pre homeowner installed a sliding glass door. The rollers are at the top instead of the bottom. I have taking the molding off and have no room at the top for more clearance and the door is a good half inch away from being able to remove

Sort by:Oldest

Comments (4)

sdello
4 years ago
sorry but your post doesn't make a lot of sense. Most sliders I've seen have a ridge on the track at the bottom that the rollers (that look like pulleys) ride on. The roller can be retracted by turning a screw near them. With the roller retracted one can lift the door over the ridge and angle it out.

Not sure how it's possible to assemble the door with the rollers on the top.

Pictures and the make/model of the door would help.
tom33onorato thanked sdello
tom33onorato
Original Author
4 years ago
As you can see, the rollers are at the top of the door and I’m not sure how they installed either??
Related Professionals
Clovis Kitchen & Bathroom Remodelers · Waukegan Kitchen & Bathroom Remodelers · Arlington General Contractors · Welleby Park General Contractors · Joppatowne General Contractors · Rendon Painters · Boca Raton Painters · Brandon Painters · Fox Lake Painters · Franklin Painters · Helena Painters · Kyle Painters · Lehi Painters · Midlothian Painters · Tukwila Painters
tom33onorato
Original Author
4 years ago
Keep trying to show you a picture of the rollers at the top but I guess this site only allows a couple pictures ‍♂️
sdello
4 years ago
sorry I can't see anything as there are no pictures here. Maybe you posted and deleted them before I logged in a again.