FREE shipping on orders over $49!* Details
Rev-A-Shelf Contemporary Kitchen Drawer Organizers
Sort by:
Price
32 Results
Best Seller
Wood Trim to Fit Drawer Peg Board Insert With Wooden Pegs, Natural, 30.25"Wby Rev-A-Shelf(950)
$118
Free Shipping
Rev-A-Shelf has made it easy to organize your deep drawers with our wood peg board system. Available in three standard sizes. Each size can be trimmed to fit and with the easy drop-in installation you can take your drawer from drab and messy to chic and orderly within seconds.
- Included: (1) Wood drawer peg board insert and (12) Wood pegs
- Perfect for dishes or other platters
- Trim to a custom fit using a table saw for precise cut
- Recommended for 8" or deeper drawers
- Designed for a drawer that is 30-1/4" or smaller
- Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
Best Seller
Wood Trim to Fit Utility Drawer Insert Organizer, 2.88", 18.5"Wby Rev-A-Shelf(647)
SALE
$77$128
Free Shipping
Organize kitchen drawers with Rev-A-Shelf’'s Wood Utility Tray Insert. The 4WUT Series is made of either our classic Maple hardwood with a UV cured clear finish or our walnut construction with satin finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with various sizes that may be trimmed to fit your drawer size.
- Included: (1) Wood utility tray insert
- Product can simply be dropped into drawer or trimmed to a custom fit (table saw recommended)
- 2-7/8" depth for taller drawers
- Minimum Trim Size: 8-1/8" W x 17"
- Designed for a drawer that is 18-3/4" W or smaller
- Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
Best Seller
Wood Trim To Fit Knife Block Drawer Insert Organizer, Naturalby Rev-A-Shelf(881)
$114
Free Shipping
Rev-A-Shelf's unique 4WDKB-1 Double Knife Block Tray Insert is out of the box ready at 18-1/2” x 22” providing 55 slots to store knives and has a separate compartment for other utensils. The unique design provides more storage than even our traditional Knife Block insert and with its simple drop-in installation valuable counter top space is available to use immediately. Made of our classic hardwood with a UV cured clear finish to ensure an acceptable match to any kitchen cabinet and can be trimmed to any size to fit drawers of various widths and lengths.
- Included: (1) Wood knife block insert
- Product can simply be dropped into drawer or trimmed to a custom fit (table saw recommended)
- Minimum Trim Size: 8-3/4" W x 15" D
- Designed for drawers from 12.5" to 18.5" in Width
- Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
Best Seller
Wood Trim To Fit Cutlery Drawer Insert Organizer, 20.63", 2.88"Hby Rev-A-Shelf(1051)
SALE
$94$105
Free Shipping
Organize kitchen drawers with Rev-A-Shelf’'s Wood Cutlery Tray Insert. The 4WCT Series is made of our classic Maple hardwood with a UV cured clear finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with two sizes that may be trimmed to fit various drawer sizes.
- Included: (1) Wood cutlery drawer insert
- Product can simply be dropped into drawer or trimmed to a custom fit (table saw recommended)
- 2-7/8" depth for taller drawers
- Minimum Trim Size: 14-1/2" W x 15-1/2" D
- Designed for a drawer that is 20-3/4" W or smaller
- Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
Polymer Trim to Fit Drawer Insert Cutlery Organizer, White, 17.5"Wby Rev-A-Shelf(83)
SALE
$31$38
Rev-A-Shelf's drawer inserts are the best if you are looking for a custom look. Why settle for a cutlery insert that just drops in your drawer and moves every time you open and close your drawer. Create a custom fit by trimming to your exact size. Available in multiple sizes, colors and finishes.
- Included: (1) White Rubberized Polystyrene drop-in organizer
- Trim to a custom fit using standard utility knife
- Organize kitchen utensils
- Trays come with protective film that must be removed after cutting to size
- Features a matte finish
- Minimum trim size: 14-3/4" W x 17-3/4" D
- Construction: Molded polymer designed for durability
- Trays can be trimmed with a sturdy straight edge and utility knife. After trimming, insert trays into drawer. No screws needed.
Best Seller
File Drawer Kit for Kitchen/Office Cabinet Organizationby Rev-A-Shelf(181)
$99
Free Shipping
Turn your standard height base 18 drawer/door cabinet into a two-tier file drawer with our file drawer kit. This unique kit features full-extension ball bearing slides and heavy duty chrome plated rails that hold both letter and legal folders. The bottom, side, and rear mounting was designed on the same platform as our successful 5WB2 Series wire baskets. Providing you the sturdiness you expect and easy installation.
- Included: (2) U-Shaped supports brackets, (2) file drawers, mounting hardware
- Slide Type: 100lb Full-Extension Ball-Bearing Slides
- Holds both letter and legal size files
- Depth adjustable from 19.75" to 24"
- Designed for standard height base 18" cabinet
- Door Mount Brackets: Option that is sold separately (RV-DM-FDKIT)
- Construction: Heavy-Duty Metal frame
Best Seller
Medium 30" x 21" Wood Peg Board System w/ 12 Pegs Maple Rev-A-Shelf 4DPS-3021by Rev-A-Shelf(150)
$134
Free Shipping
Rev-A-Shelf has made it easy to organize your deep drawers with our wood peg board system. Available in three standard sizes. Each size can be trimmed to fit and with the easy drop-in installation you can take your drawer from drab and messy to chic and orderly within seconds.
- Included: (1) Wood drawer peg board insert and (12) Wood pegs
- Perfect for dishes or other platters
- Trim to a custom fit using a table saw for precise cut
- Recommended for 8" or deeper drawers
- Designed for a drawer that is 30-1/4" or smaller
- Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
Best Seller
Wood K-Cup Cabinet Drawer Insert Organizer, 16"by Rev-A-Shelf(181)
SALE
$91$107
Free Shipping
Rev-A-Shelf will transform your messy coffee/tea corner into a clean and accessible beverage station. The K-Cup drawer insert can be trimmed for that custom drawer fit. Then drop in to existing drawer for easy install.
- Included: (1) Coffee Pod Drawer Insert
- Product can simply be dropped into drawer or trimmed to a custom fit (table saw recommended)
- Minimum Trim Size: 13" W x 15.58 D
- 5 tiers to hold 30 K-Cups (before trimmed)
- Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
- Can be trimmed to exact size with table saw
Rev-A-Shelf Gut-18w Utility Tray, Gloss White, 21-7/8"by Rev-A-Shelf
$26
Arrange utensils in the kitchen drawer with the Rev-A-Shelf Utility Tray. The UT/GUT Series is available in four styles and four size variations with rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. This single drawer insert is available in glossy or textured finish and white or almond colors
- Glossy white finish
- 21-7/8" W x 21-1/4" D
Rev-A-Shelf Gct-1w Cutlery Tray 11-1/2" W Gloss Whiteby Rev-A-Shelf
$18
Get rid of cluttered drawers with Rev-A-Shelf's Cutlery Trays. The CT/GCT Series is available in four styles and four size variations with rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. This single drawer insert is available in glossy or textured finish and white or almond colors. Glossy white finish. 11-1/2" W x 21-1/4" D x 2-3/8" H
Polymer Trim to Fit Drawer Insert Utility Organizer, White, 21.88"Wby Rev-A-Shelf(12)
SALE
$37$42
Rev-A-Shelf's drawer inserts are the best if you are looking for a custom look. Why settle for a cutlery insert that just drops in your drawer and moves every time you open and close your drawer. Create a custom fit by trimming to your exact size. Available in multiple sizes, colors and finishes.
- Included: (1) White Rubberized Polystyrene drop-in organizer
- Trim to a custom fit using standard utility knife
- Organize kitchen utensils
- Trays come with protective film that must be removed after cutting to size
- Features a matte finish
- Minimum trim size: 18-3/4" W x 17-3/4" D
- Construction: Molded polymer designed for durability
- Trays can be trimmed with a sturdy straight edge and utility knife. After trimming, insert trays into drawer. No screws needed.
Rev-A-Shelf GCT-3W Cutlery Tray Gloss White, 21-7/8"by Rev-A-Shelf
$25
Get rid of cluttered drawers with Rev-A-Shelf's Cutlery Trays. The GCT Series is available in four styles and four size variations with rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. This single drawer insert is available in glossy white finish. 21-7/8" W x 21-1/4" D x 2-3/8" H
Rev-A-Shelf Stainless Steel Tip-Out Tray, 11-1/4", 6581 Seriesby Rev-A-Shelf(12)
$20
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS
Rev-A-Shelf Stainless Steel Tip-Out Tray, 10", 6581 Seriesby Rev-A-Shelf(12)
$18
Free Shipping
- Stainless steel finish.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS
File Drawer Kit for Kitchen/Office Cabinet Organization, 13Wx19.25Dx9.75"Hby Rev-A-Shelf(9)
SALE
$33$38
Organize recipes, coupons, bills and more with Rev-A-Shelf’'s File Drawer System available in both legal and letter size dimensions. The RAS-FD organizer features front and back frames that fasten to the drawer box for complete stability and a versatile T-Rod that creates divided storage for both legal and letter size folders. This durable file drawer system is designed for base 18 and base 21 cabinets but features metal supports that can be trimmed to fit virtually any cabinet drawer.
- Included: (1) File drawer system and mounting hardware
- Holds legal size files
- Designed for base 18" Cabinet drawer
- Construction: Heavy-Duty Metal frame
Rev-A-Shelf Stainless Steel Tip-Out Tray With Hinges, 10", 6581 Seriesby Rev-A-Shelf
$27
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges included (RV6552H)
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS-KIT
- 11-1/4" - Search SKU: RV6581-11SS-KIT
- 13" - Search SKU: RV6581-13SS-KIT
- 14-1/4" - Search SKU: RV6581-14SS-KIT
- 16" - Search SKU: RV6581-16SS-KIT
- 19" - Search SKU: RV6581-19SS-KIT
- 22" - Search SKU: RV6581-22SS-KIT
- 25" - Search SKU: RV6581-25SS-KIT
- 28" - Search SKU: RV6581-28SS-KIT
- 31" - Search SKU: RV6581-31SS-KIT
Rev-A-Shelf LD-2061-32BM-1 Lazy Daisy 32" Diameter Full Circle - Whiteby Rev-A-Shelf
$67
Free Shipping
The fully functional ready to install bottom mount single shelf full circle lazy susan set from the Lazy Daisy Polymer Collection is a simple economical solution for your hard to access corner cabinets. With the required installation hardware included, this polymer ribbed shelf lazy susan set will instantly improve the convenience within your kitchen in both organization and accessibility.Features:
- 32 Inch Full Circle Lazy Susan Shelf with Bottom Mount Hardware
- Ribbed Tray Bottom Design Creates More Stable Organization Surface
- Features Patented Snap Pin Design and Molded Polymer Hubs
- Easily Installs with Just 4 Screws
- Limited Lifetime Warranty
- Meets and Exceeds BHMA Class-I Specifications of 20 Pounds per Square Foot for 75,000 Cycles
Specifications:
- Diameter (Inches): 32
- Minimum Opening Height (Inches): 18
Polymer Trim to Fit Drawer Insert Utility Organizer, White, 14.25"Wby Rev-A-Shelf(5)
$32
Rev-A-Shelf's drawer inserts are the best if you are looking for a custom look. Why settle for a cutlery insert that just drops in your drawer and moves every time you open and close your drawer. Create a custom fit by trimming to your exact size. Available in multiple sizes, colors and finishes.
- Included: (1) White Rubberized Polystyrene drop-in organizer
- Trim to a custom fit using standard utility knife
- Organize kitchen utensils
- Trays come with protective film that must be removed after cutting to size
- Features a matte finish
- Minimum trim size: 11-5/8" W x 17-3/4" D
- Construction: Molded polymer designed for durability
- Trays can be trimmed with a sturdy straight edge and utility knife. After trimming, insert trays into drawer. No screws needed.
4WCTM Top Mount Quadruple 27 Quart Waste Container Maple Rev-A-Shelf 4WCTM-27-4by Rev-A-Shelf(4)
SALE
$158$213
Free Shipping
Standard Close, Top Mount Pull-Out. Fits minimum cabinet width 24". Dimensions: 24" W x 23-1/4" D x 18" H. 4 White bins, 27 quarts per bin. Rev-A-Shelf 4WCTM Series are designed for door mounting only. The 4WCTM Series is designed for absolute sturdiness with rear adjustable mounting brackets for variances in cabinet depth. All 4WCTM Series come fully assembled and are constructed with solid maple wood frames. Units are equipped with heavy duty ball bearing slides with 1in over-travel capable of 150 lb. maximum loads. Includes (4) white trash bins.
Rev-A-Shelf Bread Drawer Cover, Translucent, 16.75"by Rev-A-Shelf(11)
$44
Kit includes: One-piece cover with molded handle & rear stops, 2 plastic sliding rails and mounting screws Textured cover hides scratches. Notch the back of the drawer 3/8" for cover to slide back on recessed unit for easy installation
Drop-In Chrome Cannisters for Rev-A-Shelf 4DPS Peg Boardsby Rev-A-Shelf(1)
SALE
$51$79
Free Shipping
Clean off your counter space by using our canister holder for deep drawers. This easy to install press-in system works with both our 4DPS and 4DPBG peg boards, has a stylish chrome finish, and comes complete with two 55 oz. stainless steel storage containers with durable see-thru plastic lids for easy content reference.
- Included: (2) 55 ounce Stainless Steel canisters and (2) rails
- Cannisters feature rubber seal to keep dry goods fresh longer
- Cannister include wire frame that securely fits into a peg board system to eliminate any movement
- Recommended for 8" or deeper drawers
- Designed to work with any of Rev-A-Shelf peg board systems
- 4DPS and 4DPBG Series peg board system sold separately
- Construction: Heavy gauge plated metal wire construction
Rev-A-Shelf Gct-2w Cutlery Tray 14-1/2" W Gloss Whiteby Rev-A-Shelf
$27
Get rid of cluttered drawers with Rev-A-Shelf's Cutlery Trays. The CT/GCT Series is available in four styles and four size variations with rubberized polystyrene to allow easy trimming for a perfect fit in any drawer. This single drawer insert is available in glossy or textured finish and white or almond colors. Glossy white finish. 14-1/4" W x 21-1/4" D x 2-3/8" H
White Steel Pull Out Waste/Trash Container, 10.63"Wx22"Dx19"Hby Rev-A-Shelf(688)
$85
Free Shipping
Rev-A-Shelf knows waste containers better than anyone in our industry and our RV series is perfect for anyone wanting to replace your existing floor standing trash can and create more space in your kitchen. Available in chrome or white frames and offered in variety of widths and container sizes. All are easy to assemble and glide effortlessly on a sturdy slide system. Look for the optional door mount kit and lids (35 Qrt and 50 Qrt only) that will surely finish your installation, but is not required for operation.
- Included: (1) White 35 quart container with White frame and mounting hardware
- Slide Type: 75lb 3/4 Extension Ball-Bearing Slides
Waste Container bins Included:
- Once installed, unit can be removed for easy cleaning
- Designed for cabinet opening width of 11-1/2" to 15"
- Door Mount Brackets: Option that is sold separately (RV DM KIT)
- Optional Rev-A-Shelf lids available, sold separately
- Construction: Heavy gauge painted metal wire construction
- Mounts to cabinet floor
Rev-A-Shelf Stainless Steel Tip-Out Tray, 19", 6581 Seriesby Rev-A-Shelf(12)
$32
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS
Rev-A-Shelf Stainless Steel Tip-Out Tray With Hinges, 25", 6581 Seriesby Rev-A-Shelf(12)
$49
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges included (RV6552H)
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS-KIT
- 11-1/4" - Search SKU: RV6581-11SS-KIT
- 13" - Search SKU: RV6581-13SS-KIT
- 14-1/4" - Search SKU: RV6581-14SS-KIT
- 16" - Search SKU: RV6581-16SS-KIT
- 19" - Search SKU: RV6581-19SS-KIT
- 22" - Search SKU: RV6581-22SS-KIT
- 25" - Search SKU: RV6581-25SS-KIT
- 28" - Search SKU: RV6581-28SS-KIT
- 31" - Search SKU: RV6581-31SS-KIT
Rev-A-Shelf Stainless Steel Tip-Out Tray, 28", 6581 Seriesby Rev-A-Shelf(12)
$43
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS
Rev-A-Shelf Stainless Steel Tip-Out Tray, 22", 6581 Seriesby Rev-A-Shelf(16)
$27
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS
Rev-A-Shelf Stainless Steel Tip-Out Tray, 25", 6581 Seriesby Rev-A-Shelf(12)
$41
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS
Rev-A-Shelf Stainless Steel Tip-Out Tray, 13", 6581 Seriesby Rev-A-Shelf(12)
$23
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS
Polymer Trim to Fit Glossy Drawer Insert Utility Organizer, 11.5"by Rev-A-Shelf(14)
$32
Rev-A-Shelf's drawer inserts are the best if you are looking for a custom look. Why settle for a cutlery insert that just drops in your drawer and moves every time you open and close your drawer. Create a custom fit by trimming to your exact size. Available in multiple sizes, colors and finishes.
- Included: (1) Glossy White utility tray insert
- Trim to a custom fit using standard utility knife
- Organize kitchen utensils
- Trays come with protective film that must be removed after cutting to size
- Features a glossy finish
- Minimum trim size: 8-5/8" W x 17-3/4" D
- Construction: Molded polymer designed for durability
- Trays can be trimmed with a sturdy straight edge and utility knife. After trimming, insert trays into drawer. No screws needed.
File Drawer Kit for Kitchen/Office Cabinet Organization, 15.88Wx19.25Dx9.75"Hby Rev-A-Shelf
$40
Organize recipes, coupons, bills and more with Rev-A-Shelf’'s File Drawer System available in both legal and letter size dimensions. The RAS-FD organizer features front and back frames that fasten to the drawer box for complete stability and a versatile T-Rod that creates divided storage for both legal and letter size folders. This durable file drawer system is designed for base 18 and base 21 cabinets but features metal supports that can be trimmed to fit virtually any cabinet drawer.
- Included: (1) File drawer system and mounting hardware
- Holds letter size files
- Designed for base 21" Cabinet drawer
- Construction: Heavy-Duty Metal frame
Rev-A-Shelf Stainless Steel Tip-Out Tray, 14-1/4", 6581 Seriesby Rev-A-Shelf
$29
Free Shipping
- Stainless steel finish.
- Installation screws included.
- Hinges not included.
- Does not come with built-in tab stops.
Available sizes:
- 10" - Search SKU: RV6581-10SS
- 11-1/4" - Search SKU: RV6581-11SS
- 13" - Search SKU: RV6581-13SS
- 14-1/4" - Search SKU: RV6581-14SS
- 16" - Search SKU: RV6581-16SS
- 19" - Search SKU: RV6581-19SS
- 22" - Search SKU: RV6581-22SS
- 25" - Search SKU: RV6581-25SS
- 28" - Search SKU: RV6581-28SS
- 31" - Search SKU: RV6581-31SS