Aspen Industries Inc. and LEGACY HEATING Fire Pit Accessories

• Welded 5/8High Grade Carbon Steel Bar Stock
• 7" tall
• High heat-resistant electrostatically applied, weather resistant black finish
• Creates "Core of Heat"

Optional Char Guard Upgrade15.25" x 15.25" footprint (measured tine to cross tine) Basic TeePee makes it easy to stack wood for campfire or infer pit. The "tepee" is a classic way to start a fire. Aspen Industries' TeePee Fire Pit Grate makes it easy to lean kindling or firewood in a tepee shaped cone. This creates a small area core of heat at the bottom. When you start kindling in the bottom, it will get to the wood around it and as the wood burns and falls into the middle the "core of heat", it maintains the hot wood embers. Made of welded 5/8High grade steel bar and electrostatically finished with high heat, weather-resistant black paint.

• Manufactured by Aspen Industries Masterflame brand by Aspen Industries

• � Front or back opens for attending fire
• � Height is proportional (1/2 of diameter)
• � Welded 1/4" x 1" solid steel flat bar
• � 8 x 8 per square inch mesh of 23 gauge steel wire
• � Choice of high grade Carbon Steel, Hybrid Option or all Stainless Steel

For round-shaped fire pits, covers and prevents sparks and embers from flying out of the pit - even in the wind. Helps prevent accidents, contains incendiary sparks, ash and soot. Both ends of "clam shell" designed screen pivot open, allowing access to tend fire. Handle on each side for easy access. Available from 24" to 60" diameter (no fractions). Made of welded 1/4" x 1" solid steel flat bar framework and fine steel mesh screen (8 x 8 per sq. inch; 23 gauge steel wire). High heat-resistant electrostatically applied, weather-resistant black finish. Choice of welded high grade steel (mesh screen and framework), hybrid (high grade carbon steel framework, stainless steel mesh screen and stainless steel hardware) or all stainless steel (304 stainless steel framework, stainless steel mesh screen and stainless steel hardware).

Made in the U.S.A. Most orders ship within 10 to 14 working days. 24� to 30� diameter pivot screens ship ground; 31� diameter and larger ship freight on pallet.

To determine fire pit screen size: Measure pit diameter and add 4 inches. (Example: Inside pit diameter is 24". Add in the 4" so screen size would be 28" diameter screen. Be sure the specified dimension includes the additional 4�.)
Note: The pivot screen's outer diameter requirement is approximately 1-1/2" wider than the screen size. Master Flame Fire Pit Safety Screens manufactured by Aspen Industries, Inc. Master Flame brand by Aspen Industries.

The Master Flame Fire Pit Screen is a smart addition to your patio. With a weather-resistant finish and two decorative doors built into the screen, this handy piece keeps embers contained and helps prevent accidents. The traditional black finish and decorative handles give this screen the classic style that Aspen Industries Inc. is known for.

To determine fire pit screen size: Measure pit diameter and add 4 inches. (Example: For a pit diameter of 49", add 4" for a screen size of 53".

• Made in the United States of America
• Color: Black
• Materials: Carbon steel
• Comes with steel mesh screen (8 x 8 per sq. inch; 23-gauge steel wire)
• Dimensions of steel bar: 0.25" x 1"
• Overall dimensions: W 33" x D 33" x H 17"

• � Square Fire Pit Screen with door for attending fire
• � Height is approximately 17" unless Specified
• � Welded 1/4" x 1" solid steel flat bar
• � 8 x 8 per square inch mesh of 23 gauge steel wire
• � Choice of high grade Carbon Steel, Hybrid Option or all Stainless Steel

For square-shaped fire pits, prevents sparks and embers from flying out of the pit - even in the wind. Helps prevent accidents, contains incendiary sparks, ash and soot. Hinged door (screen panel) built into the spark screen allow access and simple fire management. Available in 24" to 60" square sizes (no fractions). All hinged screens are approximately 17� in height. Made of welded 1/4" x 1" solid steel flat bar framework and fine steel mesh screen (8 x 8 per sq. inch; 23 gauge steel wire). High heat-resistant electrostatically applied, weather-resistant black finish. Choice of welded high grade steel (mesh and framework), hybrid (high grade carbon steel framework, stainless steel mesh screen and stainless steel hardware) or all stainless steel (304 stainless steel framework, stainless steel mesh screen and stainless steel hardware).

Made in the U.S.A.

Most orders ship within 10 to 14 working days. Screens up to 28� square ship ground and screens 29� and larger ship freight on a pallet. To determine square screen size: Measure pit dimensions and add 2" to the length and 2" to the width.(Example: Pit opening is 43� x 43�. Add 2" to both length and width and you should order at least a 45� x 45� square screen. Be sure the specified dimension includes the additional 2� in each direction.) Manufactured by Aspen Industries, Inc. Master Flame brand by Aspen Industries.

• Square Fire Pit Screen with door for attending fire
• Height is approximately 17" unless Specified
• Welded 1/4" x 1" solid steel flat bar
• 8 x 8 per square inch mesh of 23 gauge steel wire
• Choice of high grade Carbon Steel, Hybrid Option or all Stainless Steel

For square-shaped fire pits, prevents sparks and embers from flying out of the pit - even in the wind. Helps prevent accidents, contains incendiary sparks, ash and soot. Hinged door (screen panel) built into the spark screen allow access and simple fire management. Available in 24" to 60" square sizes (no fractions). All hinged screens are approximately 17" in height. Made of welded 1/4" x 1" solid steel flat bar framework and fine steel mesh screen (8 x 8 per sq. inch; 23 gauge steel wire). High heat-resistant electrostatically applied, weather-resistant black finish. Choice of welded high grade steel (mesh and framework), hybrid (high grade carbon steel framework, stainless steel mesh screen and stainless steel hardware) or all stainless steel (304 stainless steel framework, stainless steel mesh screen and stainless steel hardware).

Made in the U.S.A.

Most orders ship within 10 to 14 working days. Screens up to 28 square ship ground and screens 29 and larger ship freight on a pallet. To determine square screen size: Measure pit dimensions and add 2" to the length and 2" to the width.(Example: Pit opening is 43 x 43. Add 2" to both length and width and you should order at least a 45 x 45 square screen. Be sure the specified dimension includes the additional 2 in each direction.) Manufactured by Aspen Industries, Inc. Master Flame brand by Aspen Industries.

• � Lift Off Dome (Use poker to remove dome screen to attend fire)
• � Approximately 17� Height
• � Welded 1/4" x 1" solid steel flat bar
• � 8 x 8 per square inch mesh of 23 gauge steel wire
• � Choice of high grade Carbon Steel, Hybrid Option or all Stainless Steel

For round-shaped pits, prevents sparks and embers from flying out of the pit - even in the wind. Helps prevent accidents, contains incendiary sparks, ash and soot. Two handles make it easy to lift off or tip upward to remove (use poker and take precaution when hot). Available from 24" to 60" diameter (no fractions). All dome screens are approximately 17� in height. Made of welded 1/4" x 1" solid steel flat bar framework and fine steel mesh screen (8 x 8 per sq. inch; 23 gauge steel wire). High heat-resistant electrostatically applied, weather-resistant black finish. Choice of welded high grade steel (mesh screen and framework), hybrid (high grade carbon steel framework, stainless steel mesh screen and stainless steel hardware) or all stainless steel (304 stainless steel framework, stainless steel mesh screen and stainless steel hardware).
_Made in the U.S.A.

Most orders ship within 10 to 14 working days. 24� to 30� diameter dome screens ship ground; 31� diameter and larger ship freight on pallet.
To determine fire pit screen size: Measure pit diameter and add 4 inches. (Example: Inside pit diameter is 24". Add in the 4" so screen size would be 28" diameter screen. Be sure the specified dimension includes the additional 4�.)

Manufactured by Aspen Industries, Inc. Master Flame brand by Aspen Industries.iameter dome screens ship ground; 31� diameter and larger ship freight on pallet.
To determine fire pit screen size: Measure pit diameter and add 4 inches. (Example: Inside pit diameter is 24". Add in the 4" so screen size would be 28" diameter screen. Be sure the specified dimension includes the additional 4�.)

Manufactured by Aspen Industries, Inc. Master Flame brand by Aspen Industries.