Miseno and Wyndham Collection Kitchen Fixtures

MWD007 Key Features: Stainless Steel Construction: Miseno's Solid Stainless family of faucets are 100% T304 steel alloy inside and out. The smooth interior surfaces prevent build-up and actually prevent lead from ever entering the water stream, providing a health benefit over its brass counterpart. The exterior of this faucet is brushed or polished, but never plated, so the finish will never fade, nor will it rust. Drip-Free Ceramic Cartridge: Miseno uses only the highest quality ceramic valve cartridges to guarantee drip-free performance for the life of the faucet. Lifetime Warranty: Miseno water dispenser faucets are covered by a Limited Lifetime Warranty on both finish and function. Our finishes resist tarnishing, and our faucets are engineered to rival the biggest names in the industry. Reverse Osmosis Compatible: This faucet can be used with a reverse osmosis system MWD007 Features: Single hole installation Smooth single handle operation ADA compliant MWD007 Specifications: Height: 12" (mounting surface to highest part of the faucet) Spout Height: 8-7/8" (mounting surface to spout outlet) Spout Reach: 6" (center of faucet body to center of spout outlet) Flow Rate: 1.8 gallons-per-minute Faucet Holes: 1 (number of holes required for faucet installation) Max Deck Thickness: 3"

MK6557 Key Features: Solid Brass Construction: In the faucet world, there's no substitute for brass. This Miseno faucet features solid brass construction in the faucet body and handle, which will resist corrosion for years to come. Drip-Free Ceramic Cartridge: Miseno uses only the highest quality ceramic valve cartridges to guarantee drip-free performance for the life of the faucet. Pulldown Hose: Maximizes the spray head's maneuverability while boasting the beauty of a pre-rinse coil. Swivel Head: Miseno's 360° swivel spout provides tremendous versatility for all your kitchen faucet needs, while not sacrificing durability. Lifetime Warranty: Miseno kitchen faucets are covered by a Limited Lifetime Warranty on both finish and function. Our finishes resist tarnishing, and our faucets are engineered to rival the biggest names in the industry. MK6557 Features: Single-hole installation Smooth singlehandle operation All brass support bar - Holds faucet head in place when not pulled out Finish matched brass escutcheon plate included Two spray settings include an aerated stream and a circular cleaning spray ADA and low lead compliant WaterSense certified MK6557 Specifications: Height: 22-5/16" (mounting surface to highest part of the faucet) Spout Height: 8-3/8" (mounting surface to spout outlet) Spout Reach: 8-13/16" (center of faucet body to center of spout outlet) Flow Rate: 1.8 gallons-per-minute Faucet Holes: 1, 3 (number of holes required for faucet installation) Max Deck Thickness: 2-5/8" Escutcheon Width: 10"

MSS3221SR6040 Key Features: Stainless Steel Construction: Miseno sinks are constructed of 16-gauge, T-304 Stainless Steel. This is the same thickness and quality used in commercial kitchens and is guaranteed not to chip, crack or blemish. Sound Dampening: Cheap stainless sinks have one annoyance, they like to ring when bumped. A lot. Miseno sinks use a combination of rubber pads and sound absorbent acrylic undercoating that makes for a very quiet dishwashing experience. Satin Finish: Miseno stainless steel is finished to a fine satin luster that will keep your sink looking as good as the day you bought it. Fingerprints and water spots stay invisible, which makes clean up a snap. Multi-Basin Design: This sink features a double basin with a 60/40 split, providing increased versatility for any task. The offset basin style allows the faucet to be mounted to behind the smaller right basin, providing room for the larger left basin to extend farther back into the counter space than a standard split allows. Lifetime Warranty: Miseno kitchen sinks are covered by a Limited Lifetime Warranty on both finish and function. Our finishes are engineered to resist tarnishing, and the quality materials and craftsmanship guarantee flawless performance for as long as you own your home. MSS3221SR6040 Specifications: Installation Type: Undermount (sink is mounted via included steel clips which affix to the underside of the counter) Sink Height: 9" (bottom most to top most point on sink) Overall Length: 32-1/8" (left outer rim to the right outer rim) Overall Width: 20-5/8" (back outer rim to the front outer rim) Basin Length (Left): 15-1/2" (left inner rim to the right inner rim) Basin Width (Left): 18-3/4" (back inner rim to the front inner rim) Basin Depth (Left): 9" (center of basin to the rim) Basin Length (Right): 13-3/8" (right inner rim to the left inner rim) Basin Width (Right): 16-3/8" (back inner rim to the front inner rim) Basin Depth (Right): 7" (center of basin to the rim) Cabinet Space Required: 36" (accounts for the undermount lip and clips needed for install)

MSS2421SRTM Key Features: Stainless Steel Construction: Miseno sinks are constructed of T-304 Stainless Steel. This is the same quality used in commercial kitchens, and is guaranteed not to chip, crack or blemish. Sound Dampening: Cheap stainless sinks have one annoyance, they like to ring when bumped. A lot. Miseno sinks use a combination of rubber pads and sound absorbent acrylic undercoating that makes for a very quiet dish washing experience. Satin Finish: Miseno stainless steel is finished to a fine satin luster that will keep your sink looking as good as the day you bought it. Fingerprints and water spots stay invisible, which makes clean up a snap. 16-Gauge Thickness: This sink is made of 16-gauge steel which is the same material used in commercial kitchens worldwide. It is 25% thicker than their 18-gauge counterparts. The extra material also provides a sturdier fixture that will stand the test of time far better than flimsy alternatives. Extra Deep Basins: The extra deep basins are perfect for parents or young professionals by helping keep dirty dishes below the counter line. Lifetime Warranty: Miseno kitchen sinks are covered by a Limited Lifetime Warranty on both finish and function. Our finishes are engineered to resist tarnishing, and the quality materials and craftsmanship guarantees flawless performance for as long as you own your home. MSS2421SRTM Specifications: Installation Type: Dualmount (sink can be mounted from top or bottom of counter) Number of Bowls: 1 (maximizes usable workspace in the sink) Sink Height: 10" (measured from bottom most to top most point on sink) Overall Length: 24" (measured from the left outer rim to the right outer rim) Overall Width: 21" (measured from the back outer rim to the front outer rim) Basin Length: 21" (measured from the left inner rim to the right inner rim) Basin Width: 16" (measured from the back inner rim to the front inner rim) Basin Depth: 10" (measured from the center of basin to the rim) Cabinet Space Required: 27" (accounts for the undermount lip and clips needed for install) Drain Opening: 3-1/2" (standard opening size for nearly all garbage disposal including InSinkErator)

MK191 Features: Single hole installation (Can be installed on 3 hole configurations with included deck plate) Smooth single handle operation Pull-out spray head on a 24” hose provides increased versatility Sprayer features push button controls to move from an aerated stream to a powerful spray Pause button - able to stop the flow of water from the spray head without turning off the faucet Spout swivels 360 degrees to cover the entire sink Faucet function and finish are covered under Miseno’s Limited Lifetime warranty MK191 Construction: Faucet body constructed from solid brass The gold standard in plumbing - brass is ultra durable as it is highly corrosion resistant and handles variable temperatures better than any other metal Drip-free ceramic disc mixing valve cartridge Premium finishes Reflective finishes are plated and brushed finishes use a process called Physical Vapor Deposition (PVD) - both of which are guaranteed to last a lifetime Integrated 20" braided supply lines The braiding adds flexibility and durability, while the integration into the faucet saves valuable installation time, as well as a trip to the hardware store MK191 Specifications: Overall Height: 17-11/16” (mounting surface to highest part of faucet) Spout Height: 8-1/4” (mounting surface to spout outlet) Spout Reach: 9” (center of faucet body to center of spout outlet) Handle Operation: 90-degree (45-degrees back; 45-degrees forward) Flow Rate (at Max PSI): 1.8 gallons-per-minute Faucet Holes Required: 1 (3 hole, 8" center configurations can be covered by utilizing deck plate) Minimum Backsplash Clearance: 3" Maximum Deck/Counter Thickness: 2-3/8” Deck Plate (Escutcheon) Width: 10-1/8” MK191 Codes and Standards: This faucet meets or exceeds the following codes/standards WaterSense cUPC/IAPMO listed NSF 61-9 ASME A112.18.1/ CSA B125.1 ADA

Miseno MCI97-4TM Features: Constructed of porcelain enameled cast iron Triple basin sink with a 40/20/40 split increases versatility Designed for drop in installations Basins are undercoated to prevent dish clatter and cabinet condensation Rear drain location increases storage space underneath Covered under Miseno's limited lifetime warranty Miseno MCI97-4TM Specifications: Height: 8" (measured from the bottom of sink to the top of the rim) Length: 43" (measured from the left outer rim to the right outer rim) Width: 22" (measured from the back outer rim to the front outer rim) Basin Depth (Left): 8" (measured from the center of basin to the rim) Basin Length (Left): 14" (measured from the left inner rim to the right inner rim) Basin Width (Left): 16" (measured from the back inner rim to the front inner rim) Basin Depth (Center): 5" (measured from the center of basin to the rim) Basin Length (Center): 8" (measured from the left inner rim to the right inner rim) Basin Width (Center): 13" (measured from the back inner rim to the front inner rim) Basin Depth (Right): 8" (measured from the center of basin to the rim) Basin Length (Right): 14" (measured from the left inner rim to the right inner rim) Basin Width (Right): 16" (measured from the back inner rim to the front inner rim) Number of faucet Holes: 4 Basin Split: 40/20/40 Installation Type: Drop In

MK191 Features: Single hole installation (Can be installed on 3 hole configurations with included deck plate) Smooth single handle operation Pull-out spray head on a 24” hose provides increased versatility Sprayer features push button controls to move from an aerated stream to a powerful spray Pause button - able to stop the flow of water from the spray head without turning off the faucet Spout swivels 360 degrees to cover the entire sink Faucet function and finish are covered under Miseno’s Limited Lifetime warranty MK191 Construction: Faucet body constructed from solid brass The gold standard in plumbing - brass is ultra durable as it is highly corrosion resistant and handles variable temperatures better than any other metal Drip-free ceramic disc mixing valve cartridge Premium finishes Reflective finishes are plated and brushed finishes use a process called Physical Vapor Deposition (PVD) - both of which are guaranteed to last a lifetime Integrated 20" braided supply lines The braiding adds flexibility and durability, while the integration into the faucet saves valuable installation time, as well as a trip to the hardware store MK191 Specifications: Overall Height: 17-11/16” (mounting surface to highest part of faucet) Spout Height: 8-1/4” (mounting surface to spout outlet) Spout Reach: 9” (center of faucet body to center of spout outlet) Handle Operation: 90-degree (45-degrees back; 45-degrees forward) Flow Rate (at Max PSI): 1.8 gallons-per-minute Faucet Holes Required: 1 (3 hole, 8" center configurations can be covered by utilizing deck plate) Minimum Backsplash Clearance: 3" Maximum Deck/Counter Thickness: 2-3/8” Deck Plate (Escutcheon) Width: 10-1/8” MK191 Codes and Standards: This faucet meets or exceeds the following codes/standards WaterSense cUPC/IAPMO listed NSF 61-9 ASME A112.18.1/ CSA B125.1 ADA

MK191 Features: Single hole installation (Can be installed on 3 hole configurations with included deck plate) Smooth single handle operation Pull-out spray head on a 24” hose provides increased versatility Sprayer features push button controls to move from an aerated stream to a powerful spray Pause button - able to stop the flow of water from the spray head without turning off the faucet Spout swivels 360 degrees to cover the entire sink Faucet function and finish are covered under Miseno’s Limited Lifetime warranty MK191 Construction: Faucet body constructed from solid brass The gold standard in plumbing - brass is ultra durable as it is highly corrosion resistant and handles variable temperatures better than any other metal Drip-free ceramic disc mixing valve cartridge Premium finishes Reflective finishes are plated and brushed finishes use a process called Physical Vapor Deposition (PVD) - both of which are guaranteed to last a lifetime Integrated 20" braided supply lines The braiding adds flexibility and durability, while the integration into the faucet saves valuable installation time, as well as a trip to the hardware store MK191 Specifications: Overall Height: 17-11/16” (mounting surface to highest part of faucet) Spout Height: 8-1/4” (mounting surface to spout outlet) Spout Reach: 9” (center of faucet body to center of spout outlet) Handle Operation: 90-degree (45-degrees back; 45-degrees forward) Flow Rate (at Max PSI): 1.8 gallons-per-minute Faucet Holes Required: 1 (3 hole, 8" center configurations can be covered by utilizing deck plate) Minimum Backsplash Clearance: 3" Maximum Deck/Counter Thickness: 2-3/8” Deck Plate (Escutcheon) Width: 10-1/8” MK191 Codes and Standards: This faucet meets or exceeds the following codes/standards WaterSense cUPC/IAPMO listed NSF 61-9 ASME A112.18.1/ CSA B125.1 ADA

MK036 Key Features: Stainless Steel Construction: Miseno's Solid Stainless family of faucets are 100% T304 steel alloy inside and out. The smooth interior surfaces prevent build-up and actually prevent lead from ever entering the water stream, providing a health benefit over its brass counterpart. The exterior of this faucet is brushed or polished, but never plated, so the finish will never fade, nor will it rust. Drip-Free Ceramic Cartridge: Miseno uses only the highest quality ceramic valve cartridges to guarantee drip-free performance for the life of the faucet. Swivel Head: Miseno's 360° swivel spout provides tremendous versatility for all your kitchen faucet needs, while not sacrificing durability. Lifetime Warranty: Miseno kitchen faucets are covered by a Limited Lifetime Warranty on both finish and function. Our finishes resist tarnishing, and our faucets are engineered to rival the biggest names in the industry. MK036 Features: Single hole installation Smooth single handle operation Pull-out spray head enhances versatility ADA and low lead compliant WaterSense certified MK036 Specifications: Height: 10-5/8" (mounting surface to highest part of the faucet) Spout Height: 8-1/4" (mounting surface to spout outlet) Spout Reach: 9-5/8" (center of faucet body to center of spout outlet) Flow Rate: 1.8 gallons-per-minute Faucet Holes: 1 (number of holes required for faucet installation) Max Deck Thickness: 2"

MK191 Features: Single hole installation (Can be installed on 3 hole configurations with included deck plate) Smooth single handle operation Pull-out spray head on a 24” hose provides increased versatility Sprayer features push button controls to move from an aerated stream to a powerful spray Pause button - able to stop the flow of water from the spray head without turning off the faucet Spout swivels 360 degrees to cover the entire sink Faucet function and finish are covered under Miseno’s Limited Lifetime warranty MK191 Construction: Faucet body constructed from solid brass The gold standard in plumbing - brass is ultra durable as it is highly corrosion resistant and handles variable temperatures better than any other metal Drip-free ceramic disc mixing valve cartridge Premium finishes Reflective finishes are plated and brushed finishes use a process called Physical Vapor Deposition (PVD) - both of which are guaranteed to last a lifetime Integrated 20" braided supply lines The braiding adds flexibility and durability, while the integration into the faucet saves valuable installation time, as well as a trip to the hardware store MK191 Specifications: Overall Height: 17-11/16” (mounting surface to highest part of faucet) Spout Height: 8-1/4” (mounting surface to spout outlet) Spout Reach: 9” (center of faucet body to center of spout outlet) Handle Operation: 90-degree (45-degrees back; 45-degrees forward) Flow Rate (at Max PSI): 1.8 gallons-per-minute Faucet Holes Required: 1 (3 hole, 8" center configurations can be covered by utilizing deck plate) Minimum Backsplash Clearance: 3" Maximum Deck/Counter Thickness: 2-3/8” Deck Plate (Escutcheon) Width: 10-1/8” MK191 Codes and Standards: This faucet meets or exceeds the following codes/standards WaterSense cUPC/IAPMO listed NSF 61-9 ASME A112.18.1/ CSA B125.1 ADA

MK281A Features: Single hole installation (Can be installed on 3 hole configurations with included deck plate) Smooth single handle operation Pre-rinse spout design provides increased versatility Sprayer features a rocker switch to move from an aerated stream to a powerful spray Spout swivels 360 degrees to cover the entire sink Faucet function and finish are covered under Miseno’s Limited Lifetime warranty MK281A Construction: Faucet body constructed from solid brass The gold standard in plumbing - brass is ultra durable as it is highly corrosion resistant and handles variable temperatures better than any other metal Drip-free ceramic disc mixing valve cartridge Premium finishes Reflective finishes are plated and brushed finishes use a process called Physical Vapor Deposition (PVD) - both of which are guaranteed to last a lifetime Integrated 20" braided supply lines The braiding adds flexibility and durability, while the integration into the faucet saves valuable installation time, as well as a trip to the hardware store MK281A Specifications: Overall Height: 24-5/8” (mounting surface to highest part of faucet) Spout Height: 7-3/8” (mounting surface to spout outlet) Spout Reach: 9-15/16” (center of faucet body to center of spout outlet) Handle Operation: 90-degree (45-degrees back; 45-degrees forward) Flow Rate (at 60 PSI): 1.75 gallons-per-minute Faucet Holes Required: 1 (3 hole, 8" center configurations can be covered by utilizing deck plate) Minimum Backsplash Clearance: 3" Maximum Deck/Counter Thickness: 2-1/8” Deck Plate (Escutcheon) Width: 10-1/8” MK281A Codes and Standards: This faucet meets or exceeds the following codes/standards WaterSense cUPC/IAPMO listed NSF 61-9 NSF/ANSI 372 ASME A112.18.1 M/A 112.18.1 ADA

MK381PB Construction: The gold standard in plumbing - brass is ultra durable as it is highly corrosion resistant and handles variable temperatures better than any other metal Drip-free ceramic disc mixing valve cartridge Reflective finishes are plated and brushed finishes use a process called Physical Vapor Deposition (PVD) - both of which are guaranteed to last a lifetime MK381PB Features: Smooth Spray Technology: This spray setting offers a broader, lighter spray to gently rinse produce and greatly reduce splashing for easy sink cleaning. Faucet function and finish are covered under Miseno’s Limited Lifetime warranty Single hole installation Smooth single handle operation Pull-down spray head on a 24" long hose provides increased versatility Sprayer features a rocker switch to move from an aerated stream to Smooth Spray setting Spout swivels 360 degrees to cover the entire sink Faucet includes optional escutcheon plate to cover additional faucet holes MK381PB Specifications: Height: 16-7/16" Spout Height: 8-1/4" Spout Reach: 8-9/16" Flow Rate: 1.8 GPM Faucet Holes: 1 Maximum Deck Thickness: 2" Compliant with the following codes and standards: IAPMO/cUPC NSF 61-9 NSF/ANSI 372 ADA

Miseno MCI98-0UM Features: Constructed of porcelain enameled cast iron Triple basin sink with a 40/20/40 split increases versatility Designed for undermount installations Basins are undercoated to prevent dish clatter and cabinet condensation Rear drain location increases storage space underneath Covered under Miseno's limited lifetime warranty Miseno MCI98-0UM Specifications: Height: 8" (measured from the bottom of sink to the top of the rim) Length: 42" (measured from the left outer rim to the right outer rim) Width: 19" (measured from the back outer rim to the front outer rim) Basin Depth (Left): 8" (measured from the center of basin to the rim) Basin Length (Left): 14" (measured from the left inner rim to the right inner rim) Basin Width (Left): 16" (measured from the back inner rim to the front inner rim) Basin Depth (Center): 5" (measured from the center of basin to the rim) Basin Length (Center): 8" (measured from the left inner rim to the right inner rim) Basin Width (Center): 13" (measured from the back inner rim to the front inner rim) Basin Depth (Right): 8" (measured from the center of basin to the rim) Basin Length (Right): 14" (measured from the left inner rim to the right inner rim) Basin Width (Right): 16" (measured from the back inner rim to the front inner rim) Basin Split: 40/20/40 Minimum Cabinet Size: 44-1/2" Installation Type: Undermount

MSS3322SRTM Key Features: Stainless Steel Construction: Miseno sinks are constructed of T-304 Stainless Steel. This is the same quality used in commercial kitchens, and is guaranteed not to chip, crack or blemish. Sound Dampening: Cheap stainless sinks have one annoyance, they like to ring when bumped. A lot. Miseno sinks use a combination of rubber pads and sound absorbent acrylic undercoating that makes for a very quiet dish washing experience. Satin Finish: Miseno stainless steel is finished to a fine satin luster that will keep your sink looking as good as the day you bought it. Fingerprints and water spots stay invisible, which makes clean up a snap. 16-Gauge Thickness: This sink is made of 16-gauge steel which is the same material used in commercial kitchens worldwide. It is 25% thicker than their 18-gauge counterparts. The extra material also provides a sturdier fixture that will stand the test of time far better than flimsy alternatives. Extra Deep Basins: The extra deep basins are perfect for parents or young professionals by helping keep dirty dishes below the counter line. Lifetime Warranty: Miseno kitchen sinks are covered by a Limited Lifetime Warranty on both finish and function. Our finishes are engineered to resist tarnishing, and the quality materials and craftsmanship guarantees flawless performance for as long as you own your home. MSS3322SRTM Specifications: Installation Type: Top-Mount/Undermount (sink can be mounted from top or bottom of counter) Number of Bowls: 1 (maximizes usable workspace in the sink) Sink Height: 10" (measured from bottom most to top most point on sink) Overall Length: 33" (measured from the left outer rim to the right outer rim) Overall Width: 22" (measured from the back outer rim to the front outer rim) Basin Length: 30" (measured from the left inner rim to the right inner rim) Basin Width: 17" (measured from the back inner rim to the front inner rim) Basin Depth: 10" (measured from the center of basin to the rim) Cabinet Space Required: 36" (accounts for the undermount lip and clips needed for install) Drain Opening: 3-1/2" (standard opening size for nearly all garbage disposal including InSinkErator)

Miseno MNO182015SR Features: Covered by Miseno's limited lifetime and 5 year limited commercial warranty Constructed from 18 gauge stainless steel Undermount installation - sink will install under the countertop Single basin design for maximum work space Sound absorbent construction to prevent dish clatter and under cabinet condensation Center drain location provides optimal draining capability Miseno MNO182015SR Specifications: Sink Length: 20" Sink Width: 15" Sink Height: 10-3/16" Basin Dimensions: 18" L x 13" W x 10-3/16" D

Miseno MNO183322SRTM4 Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Dual installation – sink can be installed under the countertop or be dropped into a cutout in the countertop Single basin design for maximum work space Sink comes pre-drilled with 4 faucet holes for faucets with 8" faucet centers Center drain location provides optimal draining capability All mounting hardware required for assembly is included Miseno MNO183322SRTM4 Specifications: Sink Length: 33" (left to right) Sink Width: 22" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 28-11/16" L x 16" W x 9" D Faucet Holes: 4 Faucet Centers: 8" (distance between the installation holes for the faucet handles) Minimum Cabinet Size: 33" Drain Connection: 3-1/2"

Miseno MNO182318SR Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Undermount installation – sink will install under the countertop Single basin design for maximum work space Center drain location provides optimal draining capability All mounting hardware required for assembly is included Miseno MNO182318SR Specifications: Sink Length: 23" (left to right) Sink Width: 18" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 21" L x 16" W x 9" D Minimum Cabinet Size: 25" Drain Connection: 3-1/2"

Miseno MNO183018SR Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Undermount installation – sink will install under the countertop Single basin design for maximum work space Center drain location provides optimal draining capability All mounting hardware required for assembly is included Miseno MNO183018SR Specifications: Sink Length: 31" (left to right) Sink Width: 18" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 29" L x 16" W x 9" D Minimum Cabinet Size: 33" Drain Connection: 3-1/2"

Miseno MNO183322SRTM1 Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Dual installation – sink can be installed under the countertop or be dropped into a cutout in the countertop Single basin design for maximum work space Sink comes pre-drilled with one faucet hole for use with a single hole faucet Center drain location provides optimal draining capability All mounting hardware required for assembly is included Miseno MNO183322SRTM1 Specifications: Sink Length: 33" (left to right) Sink Width: 22" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 28-11/16" L x 16" W x 9" D Faucet Holes: 1 Faucet Centers: 0" (distance between the installation holes for the faucet handles) Minimum Cabinet Size: 33" Drain Connection: 3-1/2"

Miseno MNO182421SRTM1 Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Dual installation – sink can be installed under the countertop or be dropped into a cutout in the countertop Single basin design for maximum work space Sink comes pre-drilled with one faucet hole for use with a single hole faucet Center drain location provides optimal draining capability Coordinates with products from the Sault line All mounting hardware required for assembly is included Miseno MNO182421SRTM1 Specifications: Sink Length: 25" (left to right) Sink Width: 22" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 21" L x 16" W x 9" D Faucet Holes: 1 Faucet Centers: 0" (distance between the installation holes for the faucet handles) Minimum Cabinet Size: 25" Drain Connection: 3-1/2"

Miseno MNO3318FC1 Key Features: Fireclay Construction: This very hard and extremely durable material is created by fusing high density clay with enamel glaze at extremely high temperatures (1600°+ degrees). The result is a non-porous, scratch and chip resistant surface, which is highly resistant to acids and alkalis that are commonly found in the kitchen. Small Radius Corners: This Miseno sink is manufactured with small-radius corners, giving it a modern-style appearance. The tight corners create a nearly-flat basin bottom, that adds to its simple elegance. Lifetime Warranty: Miseno kitchen sinks are covered by a Limited Lifetime Warranty on both finish and function. The finishes are engineered to resist tarnishing, and the quality materials and craftsmanship guarantees flawless performance for as long as you own your home. Natural Sound Dampening: Although Miseno does not add specialized pads or sprays to kill the sound in the fireclay sinks, the solid cast construction results in a fixture that limits vibration and therefore the sound effects as you clang dishes about or run water onto the basin floor. MNO3318FC1 Specifications: Height: 10" (bottom of sink to the top of the rim) Length: 33" (left outer rim to the right outer rim) Width: 18" (back outer rim to the front outer rim) Basin Depth: 9 1/8" (center of basin to the rim) Basin Length: 31-3/16" (left inner rim to the right inner rim) Basin Width: 16-1/4" (back inner rim to the front inner rim) Minimum Cabinet Size: 31" Installation Type: Farmhouse Drain Placement: Center Faucet Holes: 0 (number of holes pre-drilled for faucet installation) Material: Fireclay Number of Basins: 1 (maximizes usable workspace in the sink) Sink Shape: Rectangular Manufacturer Warranty: Limited Lifetime Drain Connection: 3-1/2"

Miseno MNO182216UM Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Undermount installation – sink will install under the countertop Single basin design for maximum work space Center drain location provides optimal draining capability All mounting hardware required for assembly is included Miseno MNO182216UM Specifications: Sink Length: 23-3/8" (left to right) Sink Width: 17-3/4" (front to back) Sink Height: 8" (top to bottom) Basin Dimensions: 21-7/16" L x 15-13/16" W x 8" D Minimum Cabinet Size: 26" Drain Connection: 3-1/2"

MSS183119WS Key Features: Chef's Style Workstation: This unique sink features a tiered track system that allows the prep accessories to slide from side to side. This maximizes the workable space in your sink and on your counter. Optional Prep Accessories: Stainless steel colander, solid wood cutting board, matching stainless steel basin racks, rolling mat, and basket strainer drain. Stainless Steel Construction: Miseno sinks are constructed of 18-gauge, T-304 Stainless Steel. This is the same thickness and quality used in commercial kitchens and is guaranteed not to chip, crack or blemish. Sound Dampening: Miseno sinks use a combination of rubber pads and sound absorbent acrylic undercoating that makes for a very quiet dishwashing experience. Satin Finish: Miseno stainless steel is finished to a fine satin luster that will keep your sink looking as good as the day you bought it. Fingerprints and water spots stay invisible, which makes clean up a snap. Lifetime Warranty: Miseno kitchen sinks are covered by a Limited Lifetime Warranty on both finish and function. Our finishes are engineered to resist tarnishing, and the quality materials and craftsmanship guarantee flawless performance for as long as you own your home. MSS163219WS Specifications: Installation Type: Undermount (sink is mounted via included steel clips which affix to the underside of the counter) Number of Bowls: 1 (maximizes usable workspace in the sink) Sink Height: 9" (measured from bottom-most to the topmost point on the sink) Overall Length: 32" (measured from the left outer rim to the right outer rim) Overall Width: 19" (measured from the back outer rim to the front outer rim) Basin Length: 29-1/2" (measured from the left inner rim to the right inner rim) Basin Width: 16-1/2" (measured from the back inner rim to the front inner rim) Basin Depth: 8.5" (measured from the center of the basin to the rim) Cabinet Space Required: 36" Drain Opening: 3-1/2" (standard opening size for nearly all garbage disposal including InSinkErator)

Miseno MNO182119UM Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Undermount installation – sink will install under the countertop Single basin design for maximum work space Rear drain location increases available space under the sink All mounting hardware required for assembly is included Miseno MNO182119UM Specifications: Sink Length: 23-3/16" (left to right) Sink Width: 20-15/16" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 21-3/16" L x 19" W x 9" D Minimum Cabinet Size: 26" Drain Connection: 3-1/2"

Miseno MNO182826UM Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Undermount installation – sink will install under the countertop Single basin design for maximum work space Rear drain location increases available space under the sink All mounting hardware required for assembly is included Miseno MNO182826UM Specifications: Sink Length: 29-3/4" (left to right) Sink Width: 18" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 27-13/16" L x 16" W x 9" D Minimum Cabinet Size: 32" Drain Connection: 3-1/2"

Miseno MNO183016UM5050 Features: Covered under Miseno's limited lifetime warranty Constructed of stainless steel Undermount installation – sink will install under the countertop Sink features dual basins with a 50/50 split Rear drain location increases available space under the sink All mounting hardware required for assembly is included Miseno MNO183016UM5050 Specifications: Sink Length: 32-5/16" (left to right) Sink Width: 18-1/2" (front to back) Sink Height: 9" (top to bottom) Basin Dimensions: 14-5/8" L x 16-5/8" W x 9" D Basin Dimensions (Left): 14-5/8" L x 16-5/8" W x 9" D Basin Dimensions (Right): 14-5/8" L x 16-5/8" W x 9" D Minimum Cabinet Size: 36" Drain Connection: 3-1/2"

Farmhouse 36" Single Basin Stainless Steel Kitchen Sink with Apron Front - Drain Assembly and Fitted Basin Rack Included Free.

Stainless steel sink drain and fitted basin rack included free. Constructed of 16 gauge T304 stainless steel; the same grade used in commercial kitchens world wide. Outer Dimensions: 35-7/8" (Left-to-Right) x 20-3/4" (Back-to-Front) x 10" (Height). Interior Dimensions: 33" (Left-to-Right) x 16" (Back-to-Front) x 10" (Height). Sound dampening technology; a combination of rubber pads and a sound absorbing acrylic spray are applied to the bottom of the sink, leading to an extremely quiet performance.
Product SKU/Model: MNO163620F

MNO3020AFC Key Features: Fireclay Construction: This very hard and extremely durable material is created by fusing high density clay with enamel glaze at extremely high temperatures (1600°+ degrees). The result is a non-porous, scratch and chip resistant surface, which is highly resistant to acids and alkalis that are commonly found in the kitchen. Extra Deep Basins: The extra deep basins are perfect for parents or young professionals by helping keep dirty dishes below the counter line, or soaking large pots and pans. Small Radius Corners: This Miseno sink is manufactured with small-radius corners, giving it a modern-style appearance. The tight corners create a nearly-flat basin bottom, that adds to its simple elegance. Lifetime Warranty: Miseno kitchen sinks are covered by a Limited Lifetime Warranty on both finish and function. Our finishes are engineered to resist tarnishing, and the quality materials and craftsmanship guarantees flawless performance for as long as you own your home. MNO3020AFC Specifications: Height: 10-1/8" (bottom of sink to the top of the rim) Length: 30-3/8" (left outer rim to the right outer rim) Width: 18-1/4" (back outer rim to the front outer rim) Basin Depth: 9" (center of basin to the rim) Basin Length: 28-7/8" (left inner rim to the right inner rim) Basin Width: 16-3/4" (back inner rim to the front inner rim) Minimum Cabinet Size: 31" Installation Type: Farmhouse Drain Connection: 3-1/2" (standard opening size for nearly all garbage disposal including InSinkErator) Drain Placement: Center Faucet Holes: 0 (number of holes pre-drilled for faucet installation) Material: Fireclay Number of Basins: 1 (maximizes usable workspace in the sink) Sink Shape: Rectangular Manufacturer Warranty: Limited Lifetime

Farmhouse 33" Single Basin Stainless Steel Kitchen Sink with Apron Front - Drain Assembly and Basin Rack Included Free.

Stainless steel sink drain and fitted basin rack included free. Constructed of 16 gauge T304 stainless steel; the same grade used in commercial kitchens world wide. Outer Dimensions: 32-7/8" (Left-to-Right) x 20-3/4" (Back-to-Front) x 10" (Height). Interior Dimensions: 30" (Left-to-Right) x 16" (Back-to-Front) x 10" (Height). Sound dampening technology; a combination of rubber pads and a sound absorbing acrylic spray are applied to the bottom of the sink, leading to an extremely quiet performance.
Product SKU/Model: MNO163320F

Miseno MNO001NV Features: Covered under a limited lifetime warranty Constructed from copper Farmhouse installation – sink will require special cabinets with an exposed front Single basin design for maximum workspace Center drain location provides optimal draining capability Hand-hammered by master artisans with years of skill and experience passed down from generations Fingerprints do not show as they will on stainless steel and other metals For basic cleaning simply use a mild soap and water, other cleaners are not necessary Miseno MNO001NV Specifications: Sink Length: 33" (from left to right) Sink Width: 22" (from front to back) Sink Height: 10-1/2" (from bottom to top) Basin Dimensions: 28" L x 17" W x 10" D Minimum Cabinet Size: 36" Drain Connection: 3-1/2

Miseno MCI44-0UM-LD Features: Constructed of porcelain enameled cast iron Double basin sink with a 50/50 split increases versatility Low-Divide sinks allow you to prep and clean more easily, without bumping a divide that's too high Designed for undermount installations Basins are undercoated to prevent dish clatter and cabinet condensation Rear drain location increases storage space underneath Covered under Miseno's limited lifetime warranty Miseno MCI44-0UM-LD Specifications: Height: 10" (measured from the bottom of sink to the top of the rim) Length: 43" (measured from the left outer rim to the right outer rim) Width: 20" (measured from the back outer rim to the front outer rim) Basin Depth (Left): 10" (measured from the center of basin to the rim) Basin Length (Left): 19" (measured from the left inner rim to the right inner rim) Basin Width (Left): 16-1/2" (measured from the back inner rim to the front inner rim) Basin Depth (Right): 10" (measured from the center of basin to the rim) Basin Length (Right): 19" (measured from the left inner rim to the right inner rim) Basin Width (Right): 16-1/2" (measured from the back inner rim to the front inner rim) Basin Split: 50/50 Minimum Cabinet Size: 45-1/2" Installation Type: Undermount

Miseno MCI36-4TM Features: Constructed of porcelain enameled cast iron Double basin sink with a 60/40 split increases versatility Designed for drop in installations Basins are undercoated to prevent dish clatter and cabinet condensation Rear drain location increases storage space underneath Covered under Miseno's limited lifetime warranty Miseno MCI36-4TM Specifications: Height: 10" (measured from the bottom of sink to the top of the rim) Length: 36" (measured from the left outer rim to the right outer rim) Width: 22" (measured from the back outer rim to the front outer rim) Basin Depth (Left): 8" (measured from the center of basin to the rim) Basin Length (Left): 18" (measured from the left inner rim to the right inner rim) Basin Width (Left): 18-1/2" (measured from the back inner rim to the front inner rim) Basin Depth (Right): 8" (measured from the center of basin to the rim) Basin Length (Right): 13" (measured from the left inner rim to the right inner rim) Basin Width (Right): 16-1/2" (measured from the back inner rim to the front inner rim) Basin Split: 60/40 Minimum Cabinet Size: 38-1/2" Installation Type: Drop In

Miseno MCI37-0UM Features: Constructed of porcelain enameled cast iron Double basin sink with a 60/40 split increases versatility Designed for undermount installations Basins are undercoated to prevent dish clatter and cabinet condensation Rear drain location increases storage space underneath Covered under Miseno's limited lifetime warranty Miseno MCI37-0UM Specifications: Height: 10" (measured from the bottom of sink to the top of the rim) Length: 36" (measured from the left outer rim to the right outer rim) Width: 22" (measured from the back outer rim to the front outer rim) Basin Depth (Left): 8" (measured from the center of basin to the rim) Basin Length (Left): 18" (measured from the left inner rim to the right inner rim) Basin Width (Left): 18-1/2" (measured from the back inner rim to the front inner rim) Basin Depth (Right): 8" (measured from the center of basin to the rim) Basin Length (Right): 13" (measured from the left inner rim to the right inner rim) Basin Width (Right): 16-1/2" (measured from the back inner rim to the front inner rim) Basin Split: 60/40 Minimum Cabinet Size: 38-1/2" Installation Type: Undermount