And Wells Sinkware Kitchen Fixtures

22 Gauge Single-Bowl Topmount Stainless Steel Sink with Faucet Hole in the middle Matte Finish 15 x 15 x 6-1/4.

• 22 Gauge Drop-in
• Type 304 Premium stainless steel
• Scratch resistant matte finish
• Mirror highlighted rim
• Heavy duty sound absorbent coating & padding
• Intelli-Pressed seamless one-piece construction
• Drain openings: 3 1/2"
• Drain placement: centered
• Mounting hardware included
• Faucet hole on Center
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08

18 gauge undermount, Type 304 Premium stainless steel, Scratch resistant matte finish, Heavy duty sound absorbent coating & padding, Intelli-Pressed seamless one-piece construction, Drain openings: 3 1/2", Drain placement: offset towards back, Mounting hardware included, Flush or 1/4" reveal 2-in-1 cutout template, Limited lifetime warranty, Complies with ASMEA 112.19.3-2008/CSA B45.4-08

20 Gauge Single-Bowl Undermount Stainless Steel Lavatory DuraSatin Finish 19-1/8 x 16-1/8 x 7.

• 20 gauge undermount lavatory
• Type 304 Premium stainless steel
• Exclusive UNIPOLISH polishing technique
• Consistent and uniform DuraSatin finish
• Double layered body with overflow
• Flush or 1/4" reveal 2-in-1 cutout template
• Drain openings: 1-3/4"
• Drain placement: Offset towards back
• Mounting hardware included
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08

This bar sink is made of premium 18-gauge type 304 stainless steel with chrome-nickel composition. It features a traditional brushed matte finish that allows normal wear and tear to blend into its subtle grains, effectively becoming scratch-resistant. A mirror-highlighted rim adds brightness and sophistication to the sink’s minimalist appearance. Heavy-duty rubber pads and coating on underside of each sink bowl muffle the noise of splashing water and absorb condensation due to changes in water temperature. Each stainless steel sink comes with our limited lifetime warranty.

• Premium 18-gauge Type 304 stainless steel body
• 7 inch deep single bowl
• Traditional brushed matte finish, providing a durable, scratch-resistant surface
• Mirror highlighted rim adds sophistication to the minimalist appearance
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: centered
• 2-in-1 flush or ¼-inch reveal cutout template
• Limited lifetime warranty
• Recommended cabinet size: 18 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08
• Certified and listed by UPC/cUPC
• Package includes: 1 Sink bottom protection grid: GWW1210, 1 strainer: S8000

This even double-bowl kitchen sink is made of premium 16-gauge Type 304 stainless steel, the most heavy-duty for residential sinks. The classic symmetric design makes it one of the most popular choices by designers and homeowners. The sink features a traditional brushed matte finish that allows normal wear and tear to blend into its subtle grains, effectively becoming scratch-resistant. A mirror-highlighted rim adds brightness and sophistication to the sink's minimalist appearance. Heavy-duty rubber pads and coating on underside of each sink bowl muffle the noise of splashing water and absorb condensation due to changes in water temperature. Each Wells stainless steel sink comes with our limited lifetime warranty.

• Premium Type 304 stainless steel body
• 16-gauge, most heavy duty practical for residential sinks
• Equal double bowls 9 inches deep
• Traditional brushed matte finish, providing a durable, scratch-resistant surface
• Mirror highlighted rim adds sophistication to the minimalist appearance
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: centered
• 2-in-1 flush or ¼-inch reveal cutout template
• Lifetime limited warranty
• Recommended cabinet size: 36 inches
• Package includes: 2 sink bottom protection grid racks: GWW1314; Free upgrade: 2 deep basket strainers S9900

Bringing a renewed contemporary vibe to your home, this large 10-inch deep single bowl sink is handcrafted with full-weight 16-gauge Type 304 stainless steel, the same material used for commercial kitchen equipment. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining approachable soft edges that facilitate easy cleaning like a traditional sink. Measuring 28 inches inside, the optimal size provides ample space for pots and pans while makes it possible to mount the sink on a 30-inch base. This sink strikes a good balance between capacity and practicality, making it a favorite of many.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep single bowl 28x16 inches inside dimension
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 33 inches

Featuring streamlined contemporary design, this 10-inch deep large 32-inch single bowl sink is handcrafted with 16 gauge premium Type 304 stainless steel, luxuriously heavy-duty for residential sinks. Its depth and span provides ample space for pots and pans and other kitchenware. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining more approachable soft edges that facilitate easy cleaning like a traditional sink.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep single bowl, inside dimension 30 x 17 inches
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 36 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08

Featuring streamlined contemporary style, this 30-inch uneven double bowl sink is handcrafted with 16 gauge premium Type 304 stainless steel, luxuriously heavy-duty for residential sinks. The 5:4 ratio of the two bowls (in width and depth) creates a dynamic visual appeal while facilitating garbage disposal connection to the small bowl and offering useful sizes of both bowls. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining more approachable soft edges that facilitate easy cleaning like a traditional sink.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 9-inch deep left bowl, inside dimension 15-1/4 x 17-3/8 inches
• 7-inch deep right bowl, inside dimension 12-1/4 x 17-3/8 inches
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 33 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08
• Package includes: 2 sink bottom protection grid racks: GCS1517LG & GCS1217; Free upgrade: 2 deep basket strainers S9900

This uneven double-bowl kitchen sink is made of premium 16-gauge Type 304 stainless steel, the most heavy duty for residential sinks. The two bowls are configured in a 30-70 ratio and are 7 and 9 inches in depth, respectively. The large D-shaped bowl on the right provides ample space for pots and pans, while the small bowl holds lighter items and connects the heavy-lifting garbage disposer if you need to. The combination of its curvy profile and usability makes it a popular choice for kitchen designers. The sink features a traditional brushed matte finish that allows normal wear and tear to blend into its subtle grains, effectively becoming scratch-resistant. A mirror-highlighted rim adds brightness and sophistication to the sink's minimalist appearance. Heavy-duty rubber pads and coating on underside of each sink bowl muffle the noise of splashing water and absorb condensation due to changes in water temperature. Drain holes are placed toward the rear of the sink so that the under-counter plumbing takes less space and leaves more room for storage. Each Wells stainless steel sink comes with our limited lifetime warranty.

• Premium Type 304 stainless steel body
• 16-gauge, most heavy duty practical for residential sinks
• Double bowls 7 and 9 inches deep configured in 30-70 ratio, with large D-shaped bowl on the right
• Traditional brushed matte finish, providing a durable, scratch-resistant surface
• Mirror highlighted rim adds sophistication to the minimalist appearance
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards back
• 2-in-1 flush or ¼-inch reveal cutout template
• Lifetime limited warranty
• Recommended cabinet size: 36 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08
• Package includes: 2 sink bottom protection grid racks: GWW1015 & GWW1718; Free upgrade: 2 deep basket strainers S9900

Bringing a renewed contemporary vibe to your home, this unique 10-inch deep butterfly equal double-bowl corner sink is handcrafted with full-weight 16-gauge Type 304 stainless steel, the same material used for commercial kitchen equipment. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining approachable soft edges that facilitate easy cleaning like a traditional sink.The two identical 16x14-inch bowls are configured with a 90-degree angle, to be set symmetrically on a large corner sink base, making a bold statement of distinguished style. With the faucet located between the two bowls, the sink offers ample counter space and convenient access from both sides of the L-shaped counter.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep butterfly equal double bowls configured with 90-degree angle, 16x14 inches inside dimension
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 36x36 inches (corner base)

Featuring streamlined contemporary design, this 9-inch deep 21-inch single bowl sink is handcrafted with 16 gauge premium Type 304 stainless steel, luxuriously heavy-duty for residential sinks. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining more approachable soft edges that facilitate easy cleaning like a traditional sink. Its size makes the sink a multitasker - it can take the role of the main sink for an apartment kitchen, the second sink on a large counter, a prep sink on an island, or even a laundry tub. With its versatile applicability and modern styling, this sink will become an everyday necessity for any home.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 9-inch deep single bowl, inside dimension 19 x 17-3/8 inches
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Complies with ASME A 112.19.3-2008/CSA B45.4-08
• Included Accessories: 1 sink bottom protection grid rack: GCS1917, free upgrade: 1 deep basket strainer S9900

• Series: The Chef's Collection
• Installation Type: Undermount
• Style: Handcrafted
• Finish/Color: Stainless steel/Matte
• Shape: Rectangular
• Gauge: 16
• Number of Faucet Holes: 0
• Drain Placement: Offset
• Material: Stainless steel
• ADA: No
• Sound Dampening: Rubber padded and coated
• Warranty: Lifetime limited warranty
• Overall Dimensions (in): 20.5W x 19D x 9H
• Bowl Dimensions (in): 19W x 17.38D x 9H
• Recommend Cabinet Size (in): 24
• Drain Connection (in): 3.5
• Weight (lbs): 21

18 Gauge Undermount Single-Bowl Stainless Steel Matte Finish 31-1/2 x 21-1/8 x 9.

• 18 gauge undermount
• Type 304 Premium stainless steel
• Scratch resistant matte finish
• Heavy duty sound absorbent coating & padding
• Intelli-Pressed seamless one-piece construction
• Drain openings: 3-1/2"
• Drain placement: offset towards back
• Mounting hardware included
• Flush or 3/16" reveal 2-in-1 cutout template
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08

22 Gauge ADA Topmount Double-Bowl Stainless Steel Matte Finish 33 x 22 x 5.

• 22 gauge topmount
• Type 304 Premium stainless steel
• Scratch resistant matte finish
• Heavy duty sound absorbent coating & padding
• Intelli-Pressed seamless one-piece construction
• Drain openings: 3-1/2"
• Drain placement: Centered
• Number of faucet holes: 3
• Mounting hardware included
• Cutout opening: 32-5/8" x 21-1/2" w/ 1-1/8" radius corners
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08
• ADA compliance
• Package includes: (2) Basket strainers: S8000

18 Gauge Undermount Triple-Bowl Stainless Steel Matte Finish 46 x 20-3/4 x 9.

• 18 gauge undermount
• Type 304 Premium stainless steel
• Scratch resistant matte finish
• Heavy duty sound absorbent coating & padding
• Intelli-Pressed seamless one-piece construction
• Drain openings: 3-1/2"
• Drain placement: offset towards back
• Mounting hardware included
• Flush or 1/4" reveal 2-in-1 cutout template
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08

This large 10-inch deep single-bowl kitchen sink is made of premium 18 gauge Type 304 stainless steel with uncompromised chrome-nickel composition. The streamlined profile, with long gentle curves at the rear and front, embodies a spirit of flow, continuation and simplicity in kitchen design. The depth and span creates ample space for pots, pans and anything else you might use around the kitchen. Without a divider, it’s easy to move things around in the sink. A grand sink with great capacity and appealingness, this sink will be the jewel of your kitchen.
The sink features a traditional brushed matte finish that allows normal wear and tear to blend into its subtle grains, effectively becoming scratch-resistant. A mirror-highlighted rim adds brightness and sophistication to the sink’s minimalist appearance. Heavy-duty rubber pads and coating on underside of each sink bowl muffle the noise of splashing water and absorb condensation due to changes in water temperature. Each Wells stainless steel sink comes with our limited lifetime warranty.

• Premium 18-gauge Type 304 stainless steel body
• 10 inch deep large single bowl
• Traditional brushed matte finish, providing a durable, scratch-resistant surface
• Mirror highlighted rim adds sophistification to the minimalist appearance
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: centered
• 2-in-1 flush or ¼-inch reveal cutout template
• Lifetime limited warranty
• Recommended cabinet size: 33 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08

This uneven double-bowl kitchen sink is made of premium 16 gauge Type 304 stainless steel, the most heavy duty for residential sinks. The two bowls are configured in a 60-40 ratio and are 9 and 7 inches in depth, respectively; its ideal combination of dynamics and usability makes it one of the popular designs on the market. The sink features a traditional brushed matte finish that allows normal wear and tear to blend into its subtle grains, effectively becoming scratch-resistant. A mirror-highlighted rim adds brightness and sophistication to the sink's minimalist appearance. Heavy-duty rubber pads and coating on underside of each sink bowl muffle the noise of splashing water and absorb condensation due to changes in water temperature. Drain holes are placed toward the rear of the sink so that the under-counter plumbing takes less space and leaves more room for storage. Each Wells stainless steel sink comes with our limited lifetime warranty.

• Premium Type 304 stainless steel body
• 16-gauge, most heavy duty practical for residential sinks
• Double bowls 9 and 7 inches deep configured in 60-40 ratio, with large bowl on the left
• Traditional brushed matte finish, providing a durable, scratch-resistant surface
• Mirror highlighted rim adds brightness to the minimalist appearance
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• 2-in-1 flush or ¼ inches reveal cutout template
• Lifetime limited warranty
• Recommended cabinet size: 36 inches
• Package includes: 2 sink bottom protection grid racks: GWW1518-16 & GWW1216-16; Free upgrade: 2 deep basket strainers S9900

Bringing a renewed contemporary vibe to your home, this giant 10-inch deep double bowl sink with an arched apron front is handcrafted with full-weight 16-gauge Type 304 stainless steel, the same material used for commercial kitchen equipment. The two bowls are configured in a 60-40 ratio, an ideal combination of dynamics and usability, making it a popular choice. The arched apron front adds a fine taste of urban rusticness. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining approachable soft edges that facilitate easy cleaning like a traditional sink.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep double bowls configured in 60-40 ratio, 19x16 and 13x16 inches inside dimension respectively
• Arched apron front measures 36x9 inches
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 36 inches

Providing a simple solution for kitchen multitasking, this 32 inches wide 10 inches deep handcrafted large single-bowl stainless steel sink, together with a low profile companion stainless steel colander and rubber wood cutting board, serves as a prep center that allows a lot to be done around the sink while keeping the counter tidy. The bold 45-degree bevelled rim and stepped decks form separate tracks, on which the colander and cutting board ride smoothly; the cutting board can slide underneath the colander when it’s not immediately in use. The intricate lines and geometric shapes of the sink create dazzling reflections on the sink surface. With its beauty and added convenience and efficiency, this prep center is an instant choice for your dream kitchen.

• Handcrafted with full-weight 18-gauge premium Type 304 stainless steel
• 10-inch deep large single bowl; inside dimensions 29-1/2 x 15-3/4
• Bold 45-degree bevelled rim and stepped decks
• Double-sloped turn between bottom and wall of bowl
• Sophisticated lines and shapes create beautiful reflections
• Companion low profile stainless steel colander and rubber wood cutting board
• Fine-grain brushed matte finish, lustrous yet scratch resistant
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 36 inches
• Package includes: Stainless Steel Colander, Rolling mat, Rubber Wood Cutting Board, Basket Strainer

Providing a simple solution for kitchen multitasking, this 33-inch wide 10-inch deep handcrafted large single-bowl stainless steel sink is, together with low profile stainless colander and rubber wood cutting board, serves as a prep center that allows a lot to be done around the sink while keeping the counter tidy. The bold 45-degree bevelled rim and stepped decks form separate tracks, on which the colander and the cutting board ride smoothly; the cutting board can slide underneath the colander when it’s not immediately in use. The intricate lines and geometric shapes of the sink create dazzling reflections on the sink surface, while the arched apron front adds some urban rusticness to the contemporary design. With its beauty and added convenience and efficiency, this prep center is an instant choice for your dream kitchen.

• Handcrafted with full-weight 18-gauge premium Type 304 stainless steel
• 10-inch deep large single bowl; inside dimensions 30 x 16-1/4 inches
• 9-inch farmhouse style arched apron front
• Bold 45-degree bevelled rim and stepped decks
• Double-sloped turn between bottom and wall of bowl
• Sophisticated lines and shapes create beautiful reflections
• Companion low profile stainless steel colander and rubber wood cutting board
• Fine-grain brushed matte finish, lustrous yet scratch resistant
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 33 inches
• Package includes: Stainless Steel Colander, Rolling mat, Rubber Wood Cutting Board, Basket Strainer

This large single-bowl kitchen sink is made of premium 16-gauge Type 304 stainless steel, the most heavy-duty for residential sinks. Its enduring design and its size makes the sink a multitasker - It can take the role of the main sink for an apartment kitchen, the second sink on a large counter, a prep sink on an island, or even a laundry tub. With its lasting style and applicability, this sink will become an everyday necessity for any home.
The sink features a traditional brushed matte finish that allows normal wear and tear to blend into its subtle grains, effectively becoming scratch-resistant. A mirror-highlighted rim adds brightness and sophistication to the sink’s minimalist appearance. Heavy-duty rubber pads and coating on underside of each sink bowl muffle the noise of splashing water and absorb condensation due to changes in water temperature. Each Wells stainless steel sink comes with our limited lifetime warranty.

• Premium Type 304 stainless steel body
• 16-gauge, most heavy-duty practical for residential sinks
• 9 inch deep single bowl
• Traditional brushed matte finish, providing a durable, scratch-resistant surface
• Mirror highlighted rim adds sophistication to the minimalist appearance
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: centered
• 2-in-1 flush or ¼-inch reveal cutout template
• Recommended cabinet size: 27 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08

Featuring streamlined contemporary design, this 7-inch deep 14 x 19-inch elongated bar sink is handcrafted with 16 gauge premium Type 304 stainless steel, luxuriously heavy-duty for residential sinks. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining more approachable soft edges that facilitate easy cleaning like a traditional sink. It can be installed in either directions. Horizontal installation would create a chic asymmetrical feel with a sense of fluidness, due to the non-center placement of the drain hole and the pressed draining channels.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 7-inch deep elongated bar sink, inside dimension 12-1/4 x 17-3/8 inches
• Horizontal or vertical installation
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 18 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08

This D-shaped single-bowl kitchen sink is made of premium 16-gauge Type 304 stainless steel, the most heavy-duty for residential sinks. By extending the traditional rectangular outline into a D-shape, the design creates an elegant curvature while maximizing the sink’s usable space. The faucet can be conveniently installed at the rear left or right corner, leaving the other corner for options such as a soap dispenser or a drinking water faucet. The graceful contour of this sink, combined with its optimal capacity, makes it an instant classic.
The sink features a traditional brushed matte finish that allows normal wear and tear to blend into its subtle grains, effectively becoming scratch-resistant. A mirror-highlighted rim adds brightness and sophistication to the sink’s minimalist appearance. Heavy-duty rubber pads and coating on underside of each sink bowl muffle the noise of splashing water and absorb condensation due to changes in water temperature. Drain hole is placed toward the rear of the sink so that the under-counter plumbing takes less space and leaves more room for storage. Each Wells stainless steel sink comes with our limited lifetime warranty.

• Premium Type 304 stainless steel body
• 16-gauge, most heavy-duty practical for residential sinks
• 9 inch deep D-shaped single bowl
• Traditional brushed matte finish, providing a durable, scratch-resistant surface
• Mirror highlighted rim adds sophistification to the minimalist appearance
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• 2-in-1 flush or ¼-inch reveal cutout template
• Lifetime limited warranty
• Recommended cabinet size: 27 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08
• Package includes: 1 sink bottom protection grid rack: GWW2118, Free upgrade: 1 deep basket strainer S9900

This 9-inch deep large 33-inch single bowl sink with apron front is handcrafted with 16 gauge premium Type 304 stainless steel, luxuriously heavy-duty for residential sinks. Its depth and span provides ample space for pots and pans and other kitchenware, and the farmhouse style apron front adds rusticness to the streamlined contemporary styling. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining more approachable soft edges that facilitate easy cleaning like a traditional sink.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 9-inch deep single bowl, inside dimension 31-1/2 x 17 inches
• 9-inch farmhouse style apron front
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 33 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08

Featuring streamlined contemporary design, this 9-inch deep 17 x 19-inch large bar sink is handcrafted with 16 gauge premium Type 304 stainless steel, luxuriously heavy-duty for residential sinks. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining more approachable soft edges that facilitate easy cleaning like a traditional sink. It can be installed in either directions. Horizontal installation would create a chic asymmetrical feel with a sense of fluidness, due to the non-center placement of the drain hole and the pressed draining channels.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 9-inch deep large bar sink, inside dimension 15-1/4 x 17-3/8 inches
• Horizontal or vertical installation
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 21 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08
• Package includes: 1 sink bottom protection grid rack: GCS1517LG; Free upgrade: 1 deep basket strainer S9900

18 Gauge Undermount Single-Bowl Stainless Steel Matte Finish 32-1/2 x 18-5/8 x 9.

• 18 gauge undermount
• Type 304 Premium stainless steel
• Scratch resistant matte finish
• Heavy duty sound absorbent coating & padding
• Intelli-Pressed seamless one-piece construction
• Drain openings: 3-1/2"
• Drain placement: offset towards back
• Mounting hardware included
• Flush or 3/16" reveal 2-in-1 cutout template
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08

18 Gauge Undermount Double-Bowl Stainless Steel Matte Finish 29-1/8 x 18-1/2 x 8.

• 18 gauge undermount
• Type 304 Premium stainless steel
• Scratch resistant matte finish
• Heavy duty sound absorbent coating & padding
• Intelli-Pressed seamless one-piece construction
• Drain openings: 3-1/2"
• Drain placement: offset towards back
• Mounting hardware included
• Flush or 1/4" reveal 2-in-1 cutout template
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08

Providing a simple solution for kitchen multitasking, this 33-inch wide 10-inch deep handcrafted double-bowl stainless steel sink is set up in a classic 50-50 configuration and serves as a prep center that allows a lot to be done around the sink while keeping the counter tidy. The bold 45-degree bevelled rim and stepped decks form separate tracks, on which the low profile stainless steel colander and rubber wood cutting board ride smoothly; the cutting board can slide underneath the colander when it’s not immediately in use. The intricate lines and geometric shapes of the sink create dazzling reflections on the sink surface, while the arched apron front adds some urban rusticness to the contemporary design. With its beauty and added convenience and efficiency, this prep center is an instant choice for your dream kitchen.

Bringing a renewed contemporary vibe to your home, this medium-sized 10-inch deep single bowl sink is handcrafted with full-weight 16-gauge Type 304 stainless steel, the same material used for commercial kitchen equipment. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining approachable soft edges that facilitate easy cleaning like a traditional sink. A multitasker, it can play the role of the main sink of an apartment kitchen, the second sink on a large counter, a prep sink on an island, or even a laundry tub.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep single bowl 21x16 inches inside dimension
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 27 inches

22 Gauge ADA Topmount Single-Bowl Stainless Steel Matte Finish 25 x 22 x 5.

• 22 gauge topmount
• Type 304 Premium stainless steel
• Scratch resistant matte finish
• Heavy duty sound absorbent coating & padding
• Intelli-Pressed seamless one-piece construction
• Drain openings: 3-1/2"
• Drain placement: Centered
• Number of faucet holes: 3
• Mounting hardware included
• Cutout opening: 24-3/8" x 21-3/8" w/ 1-3/8" radius corners
• Limited lifetime warranty
• Complies with ASMEA 112.19.3-2008/CSA B45.4-08, ADA compliance
• ADA compliant
• Package includes: (1) Basket strainer: S8000

Bringing a renewed contemporary vibe to your home, this large 10-inch deep single bowl sink with an arched apron front is handcrafted with full-weight 16-gauge Type 304 stainless steel, the same material used for commercial kitchen equipment. The arched apron front adds a fine taste of urban rusticness. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining approachable soft edges that facilitate easy cleaning like a traditional sink. The optimal size provides ample space for pots and pans. Without a divider, it’s easy to move things around in the sink.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep single bowl 27x16 inches inside dimension
• Arched apron front measures 30x9 inches
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 30 inches
• Package includes: Basket Strainer: S9900, Sink bottom protection grid: GNC2716

Featuring streamlined contemporary style, this 9-inch deep 33-inch equal double bowl sink is handcrafted with 16 gauge premium Type 304 stainless steel, luxuriously heavy-duty for residential sinks. The classic symmetric design makes it one of the most popular choices by designers and homeowners. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining more approachable soft edges that facilitate easy cleaning like a traditional sink.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 9-inch deep double bowls, both are 15 x 17-1/2 inches (inside dimension)
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 36 inches
• Complies with ASME A 112.19.3-2008/CSA B45.4-08

17 gauge deck/ 18 gauge bowl undermount, Type 304 Premium stainless steel, Exclusive UNIPOLISH polishing technique, Consistent and uniform DuraSatin finish, Deck and bowl circle-welded structure, Flat sink bottom, Heavy duty sound absorbent coating & padding, Stylish 3/16"slope rim, 3/16" reveal cutout template, Drain openings: 3 1/2", Drain placement: offset towards back, Mounting hardware included, Limited lifetime warranty, Complies with ASMEA 112.19.3-2008/CSA B45.4-08

Bringing a renewed contemporary vibe to your home, this large 10-inch deep single bowl sink is handcrafted with full-weight 16-gauge Type 304 stainless steel, the same material used for commercial kitchen equipment. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining approachable soft edges that facilitate easy cleaning like a traditional sink. Measuring 28 inches inside, the optimal size provides ample space for pots and pans while makes it possible to mount the sink on a 30-inch base. This sink strikes a good balance between capacity and practicality, making it a favorite of many.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep single bowl 28x16 inches inside dimension
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 33 inches
• Package includes: Basket Strainer: S9900, Sink bottom protection grid: GNC2816

Bringing a renewed contemporary vibe to your home, this giant 10-inch deep single bowl sink with an arched apron front is handcrafted with full-weight 16-gauge Type 304 stainless steel, the same material used for commercial kitchen equipment. The arched apron front adds a fine taste of urban rusticness. The mindful construction of the reserved radius corners adopts the same modern design scheme as zero-radius sinks, while maintaining approachable soft edges that facilitate easy cleaning like a traditional sink. The enormous sink bowl provides ample space for pots and pans, and anything else you might need around the kitchen. Without a divider, it’s easy to move things around in the sink.

• Handcrafted with premium Type 304 stainless steel
• 16 gauge, luxuriously heavy-duty for residential sinks
• 10-inch deep single bowl 33x16 inches inside dimension
• Arched apron front measures 36x9 inches
• Mindful 3/8-inch reserved radius corners, facilitating easy cleaning
• Fine-grain brushed matte finish
• Sound and condensation absorbent coating and padding
• Mounting hardware included
• Drain openings: 3-1/2 inches diameter
• Drain placement: offset towards rear
• Lifetime limited warranty
• Recommended cabinet size: 36 inches
• Package includes: Basket Strainer: S9900, Sink bottom protection grid: GNC3316

17 gauge deck/ 18 gauge bowl undermount, Type 304 Premium stainless steel, Exclusive UNIPOLISH polishing technique, Consistent and uniform DuraSatin finish, Deck and bowl circle-welded structure, Flat sink bottom, Heavy duty sound absorbent coating & padding, Stylish 3/16"slope rim, 3/16" reveal cutout template, Drain openings: 3 1/2", Drain placement: offset towards back, Mounting hardware included, Limited lifetime warranty, Complies with ASMEA 112.19.3-2008/CSA B45.4-08