Rev-A-Shelf Kitchen Storage and Organization

Rev-A-Shelf's redesigned Two-Tier baskets make other 2-shelf units fail in comparison. With the heavy gage construction, ball-bearing slides on both baskets and multiple mounting points, this is the best two-tier unit available. With 100lb slides on each basket you don't have to worry about overloading or bending. Multiple sized width and depths are available, so you are sure to find the exact unit that fits your exact cabinet size. Optimize the performance, by adding the optional door mount kit to add a truly one-step opening/closing process (sold separately

• 5WB-DMKIT).
• Included: (1) top basket, (1) bottom basket, (2) u-shape supports, (2) rear mounting brackets and hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Both shelves operates independently
• 22" depth maximizes your kitchen cabinet
• U-shape brackets ensure proper alignment and easier installation
• (3) height adjustments on top basket
• Designed for a cabinet opening width of 8-1/2" to 12"
• Door Mount Brackets: Option that is sold separately (5WB-DMKIT)
• Adjustable Frame Height: 16-3/4" to 19"
• Construction: Heavy gauge plated metal wire construction
• Mounts to cabinet floor, rear and faceframe of cabinet

If you're tired of cluttered, unorganized and hard to access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative series of pull-out organizers are available in a variety of sizes (depth, height and width) and are available in a variety of style to accommodate any type of kitchen. From baking sheets, spices, cutting boards, utensils and even knife organization. No kitchen is complete without one of these organizers and it will change how you use your kitchen. All units require a full-height cabinet (where no drawer is above) and cabinet door must attach to gain the full features of the unit.

• Included: (1) Wood organizer, adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Fully assembled and fits into an existing full height cabinet
• Adjustable and/or removeable shelves
• Adjustable rub bushings for a precise fit
• Once installed simply attach your own cabinet door
• Designed for a full-height 9" cabinet with a 7" W or larger opening
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Mounts to cabinet floor and attach existing cabinet door

Rev-A-Shelf's chrome pull-out baskets are simple but effective in organizing most anyone's kitchen. Available in different widths and depths, this family of pull-outs are sure to work not only in your kitchen, but reduced depth versions are perfect for vanity applications. Simple to install and built to last with the heavy duty construction.

• Included: (1) wire basket and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Don't settle for what looks like similar baskets that don't pull-out all the way
• 18" depth perfect for under the sink or even vanity cabinets
• This will not mount to the side of a cabinet, only to the floor of the cabinet
• Stack multiple units in a tall pantry cabinet
• Designed for a cabinet opening width of 8-1/2" to 12"
• Door Mount Brackets: Option that is sold separately (5WB-DMKIT)
• Construction: Heavy gauge plated metal wire construction
• Mounts to cabinet floor

Rev-A-Shelf has kept design and flexibility in mind with this heavy-duty appliance lift system. The lifting mechanism makes lifting heavy or awkward appliances, into a breeze with its spring loaded supports. 3 different settings depending on the weight and simply add your own shelf to match either your countertop or kitchen decor.

• Included: (1) Heavy Duty Lift (Assist) System and mounting hardware
• This unit does not feature Soft-Close dampener (Model # RAS-ML-HDSC does)
• Full height cabinet with 24" depth is required to work properly
• (3) weight rating settings that will hold up to 60lbs
• Shelf is not Included: and is provided by customer
• Recommended for 12" to 21" opening for optimal functionality
• Construction: Heavy-Duty Metal frame
• Weight Rating: 60lbs
• Mounts to interior sides of cabinet

Simple but effective. Why fight with your baking sheets or platters and just organize them. Perfect for those small cabinets either above your refrigerator or the skinny cabinets next to your oven.

• Included: (1) Chrome organizer with mounting hardware
• Use by itself or multiple to create ultimate organization
• Will work in either a upper or lower cabinet
• No more stacking or pushing around your baking sheets
• Easily view what you have and keep nice platters from getting scratched
• Construction: Heavy gauge plated metal wire construction
• Mounts to cabinet floor

Rev-A-Shelf's fillers revolutionized otherwise wasted space in your kitchen. Normally a "filler" or extra space is simply covered up with a decorative front for either your wall (upper) or base (lower) cabinets, but with Rev-A-Shelf's line of fillers, it turns that otherwise wasted space into usable space. Fillers are intended to be installed in-between (2) cabinets in new kitchen cabinet construction and will not work in existing kitchen cabinets. Fillers are available in different widths and heights. (always good to consult with a kitchen designer to incorporate into your new kitchen.)

• Included: (1) Wood filler, (3) adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Once installed simply attach your matching panel or door
• Fillers do not go inside of a cabinet, they install in-between cabinets
• Adjustable and/or removeable shelves (middle shelf is fixed)
• Designed for exactly a 3" W x 30" H opening
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Comes fully-assembled and ready to install

If you're tired of cluttered, unorganized and hard to access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative series of pull-out organizers are available in a variety of sizes (depth, height and width) and are available in a variety of style to accommodate any type of kitchen. From baking sheets, spices, cutting boards, utensils and even knife organization. No kitchen is complete without one of these organizers and it will change how you use your kitchen. All units require a full-height cabinet (where no drawer is above) and cabinet door must attach to gain the full features of the unit.

• Included: (1) Wood knife block organizer, (4) flexible plastic cutting mats, (1) stainless-steel bin, (1) Set of adjustable rub bushings, chrome rails and mounting hardware
• Slide Type: 110lb Full-Extension BLUMOTION Slides w/Soft-Close
• Fully assembled and fits into an existing full height cabinetKnife block features flexible rods to securely hold knives
• (4) multi-colored flexible cutting mats
• Once installed simply attach your own cabinet door
• Designed for a full-height 9" cabinet with a 5-1/2" W or larger opening

Rev-A-Shelf's fillers revolutionized otherwise wasted space in your kitchen. Normally a "filler" or extra space is simply covered up with a decorative front for either your wall (upper) or base (lower) cabinets, but with Rev-A-Shelf's line of fillers, it turns that otherwise wasted space into usable space. Fillers are intended to be installed in-between (2) cabinets in new kitchen cabinet construction and will not work in existing kitchen cabinets. Fillers are available in different widths and heights. (always good to consult with a kitchen designer to incorporate into your new kitchen.)

• Included: (1) Wood filler, (3) adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Once installed simply attach your matching panel or door
• Fillers do not go inside of a cabinet, they install in-between cabinets
• Adjustable and/or removeable shelves
• Designed for exactly a 6" W x 30" H opening
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Comes fully assembled and ready to install

Rev-A-Shelf's chrome pull-out baskets are simple but effective in organizing most anyone's kitchen. Available in different widths and depths, this family of pull-outs are sure to work not only in your kitchen, but reduced depth versions are perfect for vanity applications. Simple to install and built to last with the heavy duty construction.

• Included: (1) wire basket and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Don't settle for what looks like similar baskets that don't pull-out all the way
• 22" depth maximizes your kitchen cabinet
• This will not mount to the side of a cabinet, only to the floor of the cabinet
• Stack multiple units in a tall pantry cabinet
• Designed for a cabinet opening width of 14-1/2" to 18"
• Door Mount Brackets: Option that is sold separately (5WB-DMKIT)
• Construction: Heavy gauge plated metal wire construction
• Mounts to cabinet floor

If you're tired of cluttered, unorganized, and hard-to-access cabinets, then look no further than Rev-A-Shelf's Bakeware Organizer. This fully assembled bakeware organizer will bring your heavy platters and baking dishes right to your fingertips with its heavy-duty soft-close slides. Change it up and use one side for baking sheets and/or platters and the other side for large rolls of foil or stretch wrap. The unit works best in a full-height cabinet where no drawer is above, but will work in a shorter cabinet, but note that some taller items may not fit as well. Available in (2) widths and the Included: door mount brackets to attach your existing cabinet door, this unit will surely make your kitchen tasks much easier.

• Included: (1) Wood organizer, adjustable dividers and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides w/Soft-Close
• Fully assembled and fits into an existing full height cabinet
• Adjustable rub bushings for a precise fit
• Organize cookie sheets, platter, baking pans, etc.
• NOTE: Unit is designed to work in a full-height cabinet, but will work in a door/drawer, but height of baking sheets can be limited
• Designed for a cabinet opening width of 8-1/2" to 9"
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Mounts to cabinet floor and attach existing cabinet door

Do you need that one item in the back of your wall cabinet, and the only way to access it is to pull everything out? Stop the madness with Rev-A-Shelf's pullout shelving system, whose open design ensures you can effortlessly find everything. Available in varying heights and sizes, they door mount giving you a uniquely customized look and easy operation.

• Included: (1) Wood organizer, (2) adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides w/Soft-Close
• Adjustable and/or removeable shelves
• Wood organizer simply fits into existing cabinet
• Adjustable rub bushings for a precise fit
• Once installed simply attach your own cabinet door
• Designed for a 12" W x 30" H wall cabinet with a 8-1/2" opening
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Comes fully assembled and ready to install

If you're tired of cluttered, unorganized and hard to access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative series of pull-out organizers are available in a variety of sizes (depth, height and width) and are available in a variety of style to accommodate any type of kitchen. From baking sheets, spices, cutting boards, utensils and even knife organization. No kitchen is complete without one of these organizers and it will change how you use your kitchen. All units require a full-height cabinet (where no drawer is above) and cabinet door must attach to gain the full features of the unit.

• Included: (1) Wood organizer, adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 110lb Full-Extension BLUMOTION Slides w/Soft-Close
• Fully assembled and fits into an existing full height cabinet
• Adjustable and/or removeable shelves
• Bottom and side mounting give this unit rock solid stability
• Once installed simply attach your own cabinet door
• Designed for 1/3/4", 1-1/2" and 1-5/8" Faceframe cabinets
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Mounts to cabinet floor, interior sides and attach existing cabinet door

The simple but effective wood pullout drawer by Rev-A-Shelf brings hard to reach items to your fingertips. This wood drawer features Blummotion undermount soft-close slides for smooth operation and comes with wood pegs and metal dividers to help store and organize items. Fully assembled and simple installation with only 4-screws.

• Included: (1) Tall Wood drawer, wood pegs, metal dividers and mounting hardware
• Slide Type: 110lb Full-Extension BLUMOTION Slides w/Soft-Close
• Perfect for small appliances or heavier items
• Drawer height is 8" H
• Mount to the floor of your cabinet
• Furniture grade dovetail construction
• Designed for a 21" opening
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Mounts to cabinet floor

Rev-A-Shelf's redesigned Two-Tier baskets make other 2-shelf units fail in comparison. With the heavy gage construction, ball-bearing slides on both baskets and multiple mounting points, this is the best two-tier unit available. With 100lb slides on each basket you don't have to worry about overloading or bending. Multiple sized width and depths are available, so you are sure to find the exact unit that fits your exact cabinet size. Optimize the performance, by adding the optional door mount kit to add a truly one-step opening/closing process (sold separately

• 5WB-DMKIT).
• Included: (1) top basket, (1) bottom basket, (2) u-shape supports, (2) rear mounting brackets and hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Both shelves operates independently
• 18" depth perfect for under the sink or even vanity cabinets
• U-shape brackets ensure proper alignment and easier installation
• (3) height adjustments on top basket
• Designed for a cabinet opening width of 8-1/2" to 12"
• Door Mount Brackets: Option that is sold separately (5WB-DMKIT)
• Adjustable Frame Height: 16-3/4" to 19"
• Construction: Heavy gauge plated metal wire construction
• Mounts to cabinet floor, rear and faceframe of cabinet

Rev-A-Shelf introduces the 4WP Series Swing-Out Wood Pantry System. Created for both Base and Tall 36� Pantry cabinets, the series features amenities the competitors just don't offer: From an industrial piano hinge, adjustable inside door and pantry shelves with chrome rails, to the flexibility of being able to add or remove stylish chrome bars to the top of the units for additional shelf space on both doors and swing-out pantry. The solid construction consists of 1/2� Maple that has a UV cured, clear finish to ensure a beautiful match to any cabinet. The complete kit includes two swing-out units and two door storage units with adjustable mounting brackets.

• Included: (2) Wood swing out pantries (2) door mount units with (6) adjustable shelves and mounting hardware
• Due to size/weight item normally ships via LTL carrier
• Minimum cabinet height without top rails is 45-3/4"
• NOTE: Most tall pantry cabinets will not include wood divider piece and must be provided by customer
• Adjustable shelves
• Designed for a cabinet with (2) doors at least 12" W x 45" H
• Door mount brackets: Adjustable door mount bracket that are Included: and required for operation
• Construction: Maple Wood construction with a clear coat finish for durability

Create a pantry behind decorative panels with Rev-A-Shelf's tall 432 fillers. Available for 6" applications and comes in 2 common sizes of 39" and 45" heights. Can be used alone or in conjunction with others to meet your 84", 90" and 96" height requirements. These fillers are loaded with features from the adjustable door mount brackets (Included:), full-extension ball-bearing slides, beautiful chrome accent rails and the adjustable shelves or stainless steel backer will make this a must have for otherwise wasted space.

• Included: (1) Wood filler, (5) adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 150lb Full-Extension Ball-Bearing Slides
• Once installed simply attach your matching panel or door
• Fillers do not go inside of a cabinet, they install in-between cabinets
• Adjustable shelves
• Designed for exactly a 6" opening that is 30" tall
• Stack 2 together for taller applications (mending plate Included:)
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Comes fully assembled and ready to install

Rev-A-Shelf's polymer lazy susans are revered as the best on the market. Whether you are replacing an old unit or just adding a lazy susans to your corner cabinet. You will not be disappointed with the high quality design and the durable rotating hardware that makes installation simple.

• Included: (2) Shelf White Kidney-Shaped Polymer set with telescoping shaft and mounting hardware
• Independently rotating molded Polymer hardware
• Kidney Lazy susans do not attach to any door
• Shelves are adjustable once installed
• Telescoping shaft adjust from 26"H to 31" H
• Designed for Corner Base Cabinets
• Construction: Injection molded polymer plastic designed for durability
• Shelf Weight Rating: 20 lbs. per sqft

Rev-A-Shelf's fillers revolutionized otherwise wasted space in your kitchen. Normally a "filler" or extra space is simply covered up with a decorative front for either your wall (upper) or base (lower) cabinets, but with Rev-A-Shelf's line of fillers, it turns that otherwise wasted space into usable space. Fillers are intended to be installed in-between (2) cabinets in new kitchen cabinet construction and will not work in existing kitchen cabinets. Fillers are available in different widths and heights. (always good to consult with a kitchen designer to incorporate into your new kitchen.)

• Included: (1) Wood filler, (5) adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides w/Soft-Close
• Once installed simply attach your matching panel or door
• Fillers do not go inside of a cabinet, they install in-between cabinets
• Adjustable and/or removeable shelves (middle shelf is fixed)
• Adjustable shelves
• Designed for exactly a 6" W x 42" H opening
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Comes fully-assembled and ready to install

If you're tired of cluttered, unorganized and hard to access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative series of pull-out organizers are available in a variety of sizes (depth, height and width) and are available in a variety of style to accommodate any type of kitchen. From baking sheets, spices, cutting boards, utensils and even knife organization. No kitchen is complete without one of these organizers and it will change how you use your kitchen. All units require a full-height cabinet (where no drawer is above) and cabinet door must attach to gain the full features of the unit.

• Included: (1) Wood organizer, (2) adjustable shelves with Chrome rails, (3) removable Stainless Steel Bins and mounting hardware
• Slide Type: 110lb Full-Extension BLUMOTION Slides w/Soft-Close
• Fully assembled and fits into an existing full height cabinet
• Adjustable and/or removeable shelves
• Adjustable rub bushings for a precise fit
• Once installed simply attach your own cabinet door
• Designed for a full height 9" cabinet with a 5.5" opening
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Mounts to cabinet floor and attach existing cabinet door

If you're tired of cluttered, unorganized and hard to access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative series of pull-out organizers are available in a variety of sizes (depth, height and width) and are available in a variety of style to accommodate any type of kitchen. From baking sheets, spices, cutting boards, utensils and even knife organization. No kitchen is complete without one of these organizers and it will change how you use your kitchen. All units require a full-height cabinet (where no drawer is above) and cabinet door must attach to gain the full features of the unit.

• Included: (1) Wood organizer, Paper Towel bar and Chrome rails and mounting hardware
• Slide Type: 110lb Full-Extension BLUMOTION Slides w/Soft-Close
• Wood organizer simply fits into existing full-height cabinet
• Adjustable shelves
• Designed for full height 12" base cabinets
• Door mount brackets: Adjustable door mount brackets are included and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Comes fully assembled and ready to install
• Limited Lifetime Warranty
• Slide Type: 110lb Full-Extension BLUMOTION Slides w/Soft-Close
• Fully assembled and fits into an existing full height cabinetFits standard large rolls of paper towels for easy accessibility
• Bottom shelf will accommodate larger items
• Once installed simply attach your own cabinet door
• Designed for a full-height 12" cabinet with a 8-1/2" W or larger opening

Organization is one thing every good chef has in common and now you can too with the use of our chrome lid organizer for deep drawers. Designed to work with our 4DPS and 4DPBG peg boards. This easy press-in rack keeps up to six lids organized, in reach, and when used in combination with our 5DCD-1-CR pot and pan holder you have a complete cooking station at your fingertips.

• Included: (1) Chrome drop-in organizer
• Wire frame securely fits into a peg board system to eliminate any movement
• Deep drawer is recommended for larger lids
• Recommended for 8" or deeper drawers
• Designed to work with any of Rev-A-Shelf peg board systems
• 4DPS and 4DPBG Series peg board system sold separately
• Construction: Heavy gauge plated metal wire construction

The simple but effective wood pullout drawer by Rev-A-Shelf brings hard to reach items to your fingertips. Simple installation and now features undermount Soft-close slide system. Maple wood material with dove-tail construction. Various sizes available depending on your particular cabinet size and application.

• Included: (1) Wood drawer and mounting hardware
• Slide Type: 35lb 3/4 Extension w/Soft-Close
• Perfect for small appliances or heavier itemsReduced depth for unique applications
• Furniture grade dovetail construction
• This will not mount to the side of a cabinet, only to the floor of the cabinet
• Designed for a cabinet opening of 11-1/2" W or larger

If you're tired of cluttered, unorganized and hard to access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative series of pull-out organizers are available in a variety of sizes (depth, height and width) and are available in a variety of style to accommodate any type of kitchen. From baking sheets, spices, cutting boards, utensils and even knife organization. No kitchen is complete without one of these organizers and it will change how you use your kitchen. All units require a full-height cabinet (where no drawer is above) and cabinet door must attach to gain the full features of the unit.

• Included: (1) Wood organizer, adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 110lb Full-Extension BLUMOTION Slides w/Soft-Close
• Fully assembled and fits into an existing standard cabinet
• Adjustable and/or removeable shelves
• Adjustable rub bushings for a precise fit
• Shorter height for a door/drawer application.
• Designed for a full-height 9" cabinet with a 5-1/2" W or larger opening
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Mounts to cabinet floor and attach existing cabinet door

Rev-A-Shelf's polymer lazy susans are revered as the best on the market. Whether you are replacing an old unit or just adding a lazy susans to your corner cabinet. You will not be disappointed with the high quality design and the durable rotating hardware that makes installation simple.

• Included: (3) Polymer Shelves, (1) telescoping post and screw pack
• Independently rotating molded Polymer hardware
• Injection molded plastic supports
• Longer shaft for taller corner cabinets
• Shelves are adjustable once installed from 38" to 46"
• Designed for a tall 39" to 46" H corner wall cabinet
• Construction: Injection molded polymer plastic designed for durability
• Shelf Weight Rating: 20 lbs. per sqft

If you're tired of cluttered, unorganized and hard to access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative series of pull-out organizers are available in a variety of sizes (depth, height and width) and are available in a variety of style to accommodate any type of kitchen. From baking sheets, spices, cutting boards, utensils and even knife organization. No kitchen is complete without one of these organizers and it will change how you use your kitchen. All units require a full-height cabinet (where no drawer is above) and cabinet door must attach to gain the full features of the unit.

• Included: (1) Wood organizer, adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides w/Soft-Close
• Fully assembled and fits into an existing full height cabinet
• Adjustable and/or removeable shelves
• Adjustable rub bushings for a precise fit
• Once installed simply attach your own cabinet door
• Designed for a full-height 9" cabinet with a 5-1/2" W or larger opening
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Mounts to cabinet floor and attach existing cabinet door

Store cleaning supplies in a convenient spot under the sink with Rev-A-Shelf's wood door storage organizer. The 4SBSU Series is made of our classic Maple hardwood with a UV cured clear finish to ensure an acceptable match to any cabinet. This handy stow-away is available in three sizes for sink base 30", 36" & 42".

• Included: (1) Wood organizer with Chrome rails, removable Polymer bin and mounting hardware
• Removable Polymer bin for easy cleaning
• Mounts to the inside of cabinet door
• Designed for a 42" W sink cabinet with 17.5" opening
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability

Rev-A-Shelf's 5300 Pullout Pantry Series is the answer to your full access (frameless) cabinetry needs. The series now offers increased basket depths for 24" deep cabinetry and comes in five different widths and four height ranges. Available in a beautiful maple or contemporary gray solid bottom to match every kitchen style, the 5300 Series glides quietly on 250 lb. rated full-extension, soft-close slide system. Features micro-adjustable door mounting and all kits are packaged with frame, baskets and hardware.

• Included: (6) Gray Solid bottom baskets, (1) Frame, (1) 200lb slide system, (2) door mount brackets, hardware
• Slide Type: 250lb Full-Extension Progressive Slides w/Soft-Close
• Basket Dims: 8" W x 20.81" D x 3.6" H
• Adjustable frame height: 73-5/8" to 80-3/4"
• Due to size/weight item normally ships via LTL carrier
• Optional extender brackets (57-EXTEND-1) allows you to move top basket all the way up (Sold separately)
• Designed for a cabinet opening of 8-1/2" to 12"
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Heavy-Duty Metal frame with solid bottom surface
• Professional installation recommended

Organize kitchen drawers with Rev-A-Shelf's Wood Utility Tray Insert. The 4WUT Series is made of either our classic Maple hardwood with a UV cured clear finish or our walnut construction with satin finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with various sizes that may be trimmed to fit your drawer size.

• Included: (1) Wood utility tray insert
• Product can simply be dropped into drawer or trimmed to a custom fit (table saw recommended)
• 2-7/8" depth for taller drawers
• Minimum Trim Size: 21-5/16" W x 17" D
• Designed for a drawer that is 33-1/4" W or smaller
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Can be trimmed to exact size with table saw

Obtrusive plumbing shouldn't dictate your storage space. Update with a Rev-A-Shelf's chrome wire pullout. Outfitted with our unique U-Shaped frame that fits around the peskiest of pipes.

• Included: (1) Chrome pullout and mounting hardware
• Slide Type: 90lb Full-Extension Undermount Slides w/Soft-Close
• Unique U-Shaped frame fits plumbing and garbage disposal
• Includes adjustable side and bottom mount brackets
• Stack multiple baskets to maximize organization
• If side mounting (instead of floor mounting) to interior of cabinet, shelf can be mounted to a width of 29-11/16" to 32"
• Designed for a Cabinet opening width of 29-3/8" to 33"
• Door mount brackets: Adjustable door mount brackets are Included:, but are not required to operate
• Construction: Heavy gauge plated metal wire construction
• Shelves can either mount to cabinet floor or interior side of cabinet

Simple but effective. Why fight with your baking sheets or platters and just organize them. Perfect for those small cabinets either above your refrigerator or the skinny cabinets next to your oven. Simple 4 screw installation.

• Included: (1) Chrome organizer with mounting hardware
• Use by itself or multiple to create ultimate organization
• Will work in either a upper or lower cabinet
• No more stacking or pushing around your baking sheets
• Easily view what you have and keep nice platters from getting scratched
• Construction: Heavy gauge plated metal wire construction
• Mounts to cabinet floor

Rev-A-Shelf's Lazy Daisy polymer susans feature a unique patented snap pin that make installation a breeze. Most susans are made from durable polypropylene plastic and plastic hub is molded right into the tray. Available in single, 2-shelf and 3-shelf models offered in both White and Almond colors.

• Included: (2) White Full-Circle Polymer shelves with bottom mount hardware
• Independently rotating molded Polymer hardware
• Shelves are not adjustable and are fixed
• 12-3/4" clearance from the bottom of the top shelf and the surface of the bottom shelf
• Designed for Corner Wall Cabinets
• Construction: Injection molded polymer plastic designed for durability
• Shelf Weight Rating: 20 lbs. per sqft
• Simple (4) screw installation

Maximize your corner cabinet space with Rev-A-Shelf's 53472 Series Kidney Shaped Lazy Susans. These Lazy Susans feature solid bottom shelves in beautiful maple or gray or contemporary Orion gray finishes. and include aluminum swivel bearings. All making the corner cabinet functional again.

• Included: (1) 32" Solid Bottom Kidney Susan Shelf, (1) Aluminum swivel bearing
• Hardware Type: Rotating bearing that mounts to a shelf
• Kidney Lazy susans do not attach to any door
• Designed for Corner Base Cabinets
• Construction: Heavy-Duty Metal frame with solid bottom surface
• Shelf Weight Rating: 20 lbs. per sqft
• Mounts to the floor or a shelf of a cabinet

Do you need that one item in the back of your wall cabinet, and the only way to access it is to pull everything out? Stop the madness with Rev-A-Shelf's pullout shelving system, whose open design ensures you can effortlessly find everything. Available in varying heights and sizes, they door mount giving you a uniquely customized look and easy operation.

• Included: (1) Wood organizer, (2) adjustable shelves with Chrome rails and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides w/Soft-Close
• Adjustable and/or removeable shelves
• Wood organizer simply fits into existing cabinet
• Adjustable rub bushings for a precise fit
• Designed for a 12" W x 36" H wall cabinet with a 8-1/2" opening
• Door mount brackets: Adjustable door mount brackets are Included: and required for operation
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability
• Comes fully assembled and ready to install

Revolutionize the way you store your pots, pans, and lids with Rev-A-Shelf's Two-Tier Cookware Organizer. The 5CW2 features independently operating shelves that accommodate a variety of cookware sizes and brands. The top tier organizes lids and the bottom tier features adjustable dividers to store a variety of larger pots and pans. Made with a heavy duty chrome plated wire frame and 100 lb. rated full-extension ball-bearing slides. The bottom, side, and rear mounting provide you the sturdiness you expect and easy installation. Optional Door mounting kit available with the 5WB-DMKIT.

• Included: (1) Chrome two-tier cookware organizer, dividers and mounting hardware
• Slide Type: 100lb Full-Extension Ball-Bearing Slides
• Both shelves operates independently
• U-shape brackets ensure proper alignment and easier installation
• Top shelf will accommodate 14 lids (depending on sizes)
• Adjustable dividers to accommodate different sizes of cookware
• Designed for a Base 24 with a 21" opening
• Door Mount Brackets: Option that is sold separately (5WB-DMKIT)
• Adjustable Frame Height: 16-3/4" to 19"
• Construction: Provides both durability and elegance with its heavy gauge wire construction
• Mounts to cabinet floor, rear and faceframe of cabinet

Rev-A-Shelf's wood door storage bins are perfect for almost anywhere in your home. On a cabinet door, pantry door, under the sink, or even on a wall. Beautiful wood construction and attractive chrome rails make it a nice piece.

• Included: (1) Wood bin with chrome rails and mounting hardware
• Perfect for spices or other household items
• Mounts to the inside of cabinet door
• Designed for 18" W wall/base cabinet with 15" W opening
• Optional Aluminum standards for unlimited adjustability (6232-26-4528-52, sold separately)
• Construction: Fully Assembled Maple Wood construction with a clear coat finish for durability

Rev-A-Shelf's polymer lazy susans are revered as the best on the market. Whether you are replacing an old unit or just adding a lazy susan to your corner cabinet. You will not be disappointed with the high quality design and the durable rotating hardware that makes installation simple.

• Included: (2) Polymer Shelves, (1) telescoping post and screw pack
• Independently rotating molded Polymer hardware
• Injection molded plastic supports
• Shelves are adjustable once installed
• Telescoping shaft adjust from 26"H to 31" H
• Designed for a standard 30" tall corner wall cabinet
• Construction: Injection molded polymer plastic designed for durability
• Shelf Weight Rating: 20 lbs. per sqft