FREE shipping on orders over $49!* Details
- All Products
- Home Improvement
- Building Materials
- Molding & Millwork
- Molding & Trim
- Type: Window & Door Trim
Window and Door Trim
Decorative Door Header Appliqueby American Pro Decor by Outwater(6)
$50
Free Shipping
A beautiful addition to embellish any entry door. Door Crosshead enhance a door or window to become the focal point of a room or wall.
- Door Header Size: 31-1/2"W x 7-3/4"H x 1-3/4"Proj.
- Manufacturer's Model# 5APD10273
- Made from high density polyurethane
- Light weight and durable
- Impervious to moisture and insects
- Easy to install using common woodworking tools
- Can be adhered using a premium polyurethane construction adhesive
- Use painters caulk to finish nails or screw holes and joints
- Primed in white and ready to paint or faux finish
- Can be painted with any high quality acrylic latex or oil-based paint
- Won't rot or mold
- Designs have a sharp, clean deep relief and show fine quality in details
Teak Pinrail L-Typeby SeaTeak(17)
$74
Free Shipping
Teak pinrails offer a beautiful, nautical finish to your cabin or Kitchen. These decorative teak guardrails prevent the contents of your shelving from falling forward. Can also be used as trim. Constructed with 100% Solid Teak.
Exterior Moulding / Cornicheby Baugrup / Ace Foam Designs LLC(1)
$285
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
2"H x 1/2"P x 94 1/2"L, (1/2" Repeat), Alexandria Rope Window & Door Casingby Ekena Millwork(6)
SALE
$17$32
Free Shipping
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from high-density urethane, giving each piece unique details that mimic traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look.
- Can be cut, drilled, screwed, or nailed
- Similar density to that of pine
- Beautiful details and design
- Factory primed and ready for paint
- Can be painted or faux finished
- Lightweight for easy installation
4 7/8"H x 1 5/8"P x 94 1/2"L Elsinore Window & Door Casingby Ekena Millwork(4)
$55
Free Shipping
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from high-density urethane, giving each piece unique details that mimic traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look.
- Can be cut, drilled, screwed, or nailed
- Similar density to that of pine
- Beautiful details and design
- Factory primed and ready for paint
- Can be painted or faux finished
- Lightweight for easy installation
Door Surround Fluted Casing, Rosette for Casing, Rosette for Casingby American Pro Decor by Outwater
$22
- Pilaster accessories work in conjunction with its matching Pilasters. They are attactive, simple and easy to install. They are come primed in white.
- Our polyurethane pilasters, capitals and plinths are light, sturdy and simple to install using standard woodworking tools
- It features a pronounced detail design
- Lightweight and easy to handle
- Factory primed white and ready to paint. Deep relief will not be lost when painted over
- Impervious to moisture, making it suitable for use in humid environments such as kitchens, bathrooms, basements, and porches
- Does not splinter or crack like wood or MDF
- Can be adhered using a premium polyurethane construction adhesive
- Use painters caulk to finish nails or screw holes and joints
- Can be painted with any high quality acrylic latex or oil-based paint
- Won't rot or mold
- Works only with its matching moulding profile
3-5/8" Plain Recycled Polystyrene Case Moulding, 4-Packby American Pro Decor by Outwater(4)
$251
Our Plain Case Moulding profiles have a sharp, clean deep relief and crisp line details to enhance the look of any room. It provides a Modern appearance. Made from Recycled Polystyrene.
- 3-5/8 in. High x 1-1/8 in. Projection x 96 in. long
- High impact and durable recycled polystyrene (RPS) casing window and door moulding
- Other Pack Options: ( 5-PACK Model# 5APD11353) (6-PACK Model# 5APD11354) (SAMPLE PC Model# 5APD11182)
- Outstanding quality made from 100% recycled polystyrene
- Light weight and durable
- Easy to install using common woodworking tools
- Use painters caulk to finish nails or screw holes and joints
- Can paint with any high quality acrylic latex paint
- Won't rot or mold
- Meticulously extruded to show care about in line details
- Has a sharp, clean and smooth surface
- 4-piece pack, (32 lineal ft. of moulding)
Exterior Moulding / Cornicheby Baugrup / Ace Foam Designs LLC
$413
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
Exterior Window Sill Decorationby Baugrup / Ace Foam Designs LLC(1)
$263
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
EWQR11 Quarter Round 1/2" Moulding Trim, 1/2" x 1/2", Sapele Mahogany, 94"by NewMouldings
$40
- Unfinished Solid Hardwood
- In Stock Ready to Ship
- Thickness: 1/2 in.
- Width: 1/2 in.
- Length: 8 foot lengths.
- Application: Base Shoe, Quarter Round, Floor Trim, Stair Trim
Exterior Moulding / Cornicheby Baugrup / Ace Foam Designs LLC
$259
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
Exterior Window Sill Decorationby Baugrup / Ace Foam Designs LLC(1)
$246
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
7"Wx96"Hx2 1/4"D With 13 1/4" Attached Plinth, Fluted Pilaster, Eachby Ekena Millwork(51)
SALE
$138$270
Free Shipping
Pilasters are a type of door and window trim that are used to frame the vertical sides of doors and windows. Most often, they are used on front doors, but they are also used on garage doors and windows for texture and style. Originally created as a subtle alternative to columns, pilasters share the same basic shape as columns, with a plinth block on top of the pilaster section, which can be fluted, smooth, or paneled. The type of pilaster you choose should match your home exterior and personal style, and is sure to increase the value of your home and give it a distinctive look. Style and function Any door or window trim adds style and function to your home. Door and window trim can be a tasteful accent for your home exterior and can also hide any flaws from the door or window installation. Pilasters are a distinctive type of trim that comes in a few main varieties. The fluted pilaster is meant to resemble the columns used in Greek and Roman architecture, which were usually fluted. It is still considered the most elegant style for columns and pilasters. New functions, new materials While the look of the fluted pilaster is the same as the Classical fluted columns, the materials have changed.
- Low maintenance product
- A low cost way to add architectural detail
- Outstanding addition to your home
- Just paint and you're ready for installation
High relief details
- Quality craftsmanship
Exterior Moulding / Cornicheby Baugrup / Ace Foam Designs LLC
$348
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
WM217 - 1 3/4"H x 5/8"P x 96"L Shingle Moulding, PVCby Ekena Millwork
$205
Free Shipping
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
2 7/8"H x 3/4"P x 94 1/2"L Monique Window & Door Casingby Ekena Millwork(25)
SALE
$26$31
Free Shipping
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from high-density urethane, giving each piece unique details that mimic traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look.
- Can be cut, drilled, screwed, or nailed
- Similar density to that of pine
- Beautiful details and design
- Factory primed and ready for paint
- Can be painted or faux finished
- Lightweight for easy installation
WM265 - 1 1/2"H x 1/4"P x 96"L Lattice Moulding, PVCby Ekena Millwork(96)
SALE
$23$29
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
5 1/2"H x 3/8"P x 96"L Beaded Planking Moulding, PVCby Ekena Millwork
SALE
$43$54
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
WM947 - 1 1/4"H x 3/8"P x 96"L Door Stop Moulding, PVCby Ekena Millwork(15)
SALE
$25$32
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
Exterior Window Sill Decorationby Baugrup / Ace Foam Designs LLC
$256
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
LWM187 - 2"H x 5/8"P x 96"L Drip Cap Moulding, PVCby Ekena Millwork(15)
$36
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
2 1/2"H x 1/2"P x 94 1/2"L, (4 1/8" Repeat), Bedford Window & Door Casingby Ekena Millwork(3)
SALE
$23$28
Free Shipping
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from high-density urethane, giving each piece unique details that mimic traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look.
- Can be cut, drilled, screwed, or nailed
- Similar density to that of pine
- Beautiful details and design
- Factory primed and ready for paint
- Can be painted or faux finished
- Lightweight for easy installation
Calabasas Molding for Indirect Lightingby Inviting Home Inc(1)
$96
Free Shipping
Molding for indirect lighting; 3-1/8"H x 2"P x 3-3/4"F; molding sold in length of 6'6"; applications: crown door trim chair rail panel baseboard; (4 piece minimum required)
The Calabasas molding concept designed by top designer Ulf Moritz consists out of 2 modernist profiles (ODC373 and ODC374). The installation of one or more of these profiles strengthens the existing architecture of your interior. These moldings are made of a higher density polyurethane material which makes them not only suitable for walls and ceilings but also as a board. Manufactured to easily accept LED lighting Calabasas molding yields even balanced light dispersion without scalloping. Noted for its refined versatility enabling this molding to be utilized equally well for up or down lighting applications Calabasas molding produces an unparalleled segue between light and shadow creating an air of freedom openness and depth unattainable through any comparable design. In addition Calabasas molding can also be used just as readily as a traditional cornice molding without lighting if desired or even as door trim or base molding.
The Calabasas molding concept designed by top designer Ulf Moritz consists out of 2 modernist profiles (ODC373 and ODC374). The installation of one or more of these profiles strengthens the existing architecture of your interior. These moldings are made of a higher density polyurethane material which makes them not only suitable for walls and ceilings but also as a board. Manufactured to easily accept LED lighting Calabasas molding yields even balanced light dispersion without scalloping. Noted for its refined versatility enabling this molding to be utilized equally well for up or down lighting applications Calabasas molding produces an unparalleled segue between light and shadow creating an air of freedom openness and depth unattainable through any comparable design. In addition Calabasas molding can also be used just as readily as a traditional cornice molding without lighting if desired or even as door trim or base molding.
Calabasas Molding Specifications:
- Outstanding quality molding made from high density polyurethane and designed specifically for installation with indirect lighting environmentally friendly material is hypoallergenic and fully recyclable no CFC no PVC no formaldehydes
- Rope or LED lighting can be easily fixed from inside the molding or on the wall behind the molding
- Water and humidity resistant
- Crown molding is pre-primed with water-based white paint
- Has tough extremely smooth surface
- Complimentary flexible molding available
- Metal dies used for consistent quality and perfect part to part match for hassle free installation
3 1/2"H x 1 3/8"P x 94 1/2"L, (5 7/8" Repeat), Dover Window & Door Casingby Ekena Millwork(2)
$46
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from high-density urethane, giving each piece unique details that mimic traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look.
- Can be cut, drilled, screwed, or nailed
- Similar density to that of pine
- Beautiful details and design
- Factory primed and ready for paint
- Can be painted or faux finished
- Lightweight for easy installation
Exterior Window Trimby Baugrup / Ace Foam Designs LLC
$255
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
3-5/8" Plain Recycled Polystyrene Case Moulding, 5-Packby American Pro Decor by Outwater(4)
SALE
$213$260
Free Shipping
Our Plain Case Moulding profiles have a sharp, clean deep relief and crisp line details to enhance the look of any room. It provides a Modern appearance. Made from Recycled Polystyrene.
- 3-5/8 in. High x 1-1/8 in. P x 96 in. L
- 5-piece pack (40-lineal feet of moulding)
- Other Pack Options: ( 4-PACK Model# 5APD10750) (6-PACK Model# 5APD11354) (SAMPLE PC Model# 5APD11182)
- High impact and durable recycled polystyrene (RPS) casing window and door moulding
- Outstanding quality made from 100% recycled polystyrene
- Light weight and durable
- Easy to install using common woodworking tools
- Use painters caulk to finish nails or screw holes and joints
- Can paint with any high quality acrylic latex paint
- Won't rot or mold
- Meticulously extruded to show care about in line details
- Has a sharp, clean and smooth surface
Exterior Moulding / Cornicheby Baugrup / Ace Foam Designs LLC
$276
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
Exterior Window Trimby Baugrup / Ace Foam Designs LLC
$225
Free Shipping
Exterior decorative moulding / corniche, made from EPS Foam and precoated with the unique BAUCOAT exterior grade acrylic coating. Items are delivered in standard 8" (96 in) long bars, as shown in section, without bevel cuts or corner pre-cuts. All bevel cuts and adjustments are made on site with a handsaw or circular saw. Joints are made with approved adhesives and may be additionally overlapped with a thin alkali resistant fiber glass mesh. Profiles are ready for application with any approved EPS adhesive on the existing wall, according to manufacturer's instructions. Ready for primer/sealer and paint. Items are decorative only and cannot be used as structural and are not intended to carry loads (other than snow load).
2 7/8"H x 1/2"P x 2"TP x 96"L Moulding, PVCby Ekena Millwork(1)
$69
Free Shipping
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
6 5/16"x6 15/16" Left and Right End Cap Set, Fade-Resistant Vinyl, Wineberryby Mid-America
$36
Free Shipping
Clean lines and crisp angles and texture provide the exacting finishing touch for Dentil Trim. Includes one left and one right end cap plus hardware.
- Backed by a limited lifetime warranty
- Maintenance-free. No scraping, sanding or painting needed
- Made in the USA
- Engineered and manufactured to exacting standards
- Won�t crack, split, or fade
- Lightweight product
Polystyrene Screen Trim Moulding, Set of 5, 1/4"x3/4"x96 ", Crystal Whiteby Inteplast Building Products
$166
Free Shipping
Inteplast Crystal White Mouldings are the ideal way for you to add style and beauty to your home. Our mouldings are lightweight and come prefinished making them an easy weekend project. Inteplast Crystal White Mouldings come in a wide variety of profiles that give you the appearance of expensive, hand-finished moulding giving you the perfect accent for your room.
- Prefinished, no sanding, priming, painting or staining needed
- Crystal white finish in a convenient 96-inches long
- Moisture-resistant, ideal for use in bathrooms, laundry rooms and kitchens
- Resistant to damage from insects
- Easy to cut, nail and install
- No warps or voids - use with confidence
3"W x 3"H x 1/2"P Standard Sedgwick Rosette with Beveled Edgeby Ekena Millwork(13)
SALE
$17$28
Upgrade your trim quickly and easily with professional looking results. Use our rosettes as a decorative addition with any window or doorway moulding and casing. Used as a transition piece or corner block, they are easy to install and eliminate the need to miter difficult angles on moulding.
- Lightweight, easy to install on walls, fireplaces, doors, furniture and more
- Install casing or panel moulding easily using rosettes for corner blocks
- Perfect for interior or exterior applications
- Easy to cut and install with common adhesive
- Waterproof, dent resistant, durable PVC that lasts a lifetime
5"H x 1 1/2"P x 94 1/2"L Bradford Traditional Casing Faciaby Ekena Millwork
$91
Free Shipping
Our beautiful casing adds a decorative, historic, feel to walls, ceilings, and furniture pieces. They are made from high-density urethane, giving each piece unique details that mimic traditional plaster and wood designs, but at a fraction of the weight. This means a simple and easy installation for you. These are also commonly used for an inexpensive wainscot look.
- Can be cut, drilled, screwed, or nailed
- Similar density to that of pine
- Beautiful details and design
- Factory primed and ready for paint
- Can be painted or faux finished
- Lightweight for easy installation
5/8"H x 5/8"P x 96"L Stop Moulding, PVCby Ekena Millwork(23)
$32
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
Weston Rope Molding, Largeby Inviting Home Inc.
$67
Free Shipping
Large Weston decorative rope molding 5"H x 7/8"P x 8'00"L molding sold in 8 foot length can be used as chair-rail door & window trim 4 piece minimum order required chair-rail molding specifications: - outstanding quality chair-rail molding made from high density polyurethane: environmentally friendly material is hypoallergenic and fully recyclable no CFC no PVC no formaldehyde; - front surface of this molding has extra durable and smooth surface; - chair-rail molding is pre-primed with water-based white paint; - lightweight durable and easy to install using common woodworking tools; - metal dies were used for consistent quality and perfect part to part match for hassle free installation; - this chair-rail molding has sharp deep and highly defined design; - matching flexible molding available; - chair-rail molding can be finished with any quality paints; Polyurethane is a high density material--it's extremely lightweight and easy to install (and comes primed and ready to paint). It is a green material meaning its CFC and formaldehyde free. It is also moisture resistant--so it won't shrink flex or mold. What's also great about Polyurethane is that it's completely customizable and can be treated as wood (you can saw it nail it screw it and sand it). In addition our polyurethane material comes primed and ready to paint. There is a four piece minimum requirement for this molding purchase.
WM176 - 1 5/8"H x 5/8"P x 96"L Brick Mould, PVCby Ekena Millwork
SALE
$30$38
General purpose mouldings, such as lattice, stop, decorative, quarter round and others are used in many different applications. General purpose mouldings can be used to combine 2 window units, cover corner wall cracks, complement accent moulding pieces and complete door units. General purpose mouldings come in many different shapes and sizes.
- Will not rot, crack, splinter or split
- Resistant to moisture, no mold and mildew
- Impervious to insects
- Does not require painting if not desired
- Paint prep is minimal, and no sanding is required
- Outstanding for exterior or interior use
