- All Products
- Bath
- Tile
- Mosaic Tile
- Mosaic Pattern: Diamond
Diamond Mosaic Floor Tile
Please note: Each order sell by carton ( 1 Carton, 5 sheets, approx 4.6 Sq Ft )
- Color: Carrara White Marble (white gray field background with a light gray veining and the patterning is usually soft and feathery);
- Size: 1.77x3.07 inch rhombus pieces mounted on 11 x 10 (0.77 sq. ft.) sturdy mesh tile sheet; 36 stones per sheet; 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- 8.56 square feet, 10 pieces per case. Case weight is 20.94 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.25 in. width x 11.75 in. length x 0.23 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
- 8.56 square feet, 10 pieces per case. Case weight is 22.79 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.13 in. width x 11.75 in. length x 0.23 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and slight variation in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
Pool Rated for use in Swimming Pools
** Price is per Piece **
- Material: Handmade Porcelain
- Piece Size: 11 1/2" x 11 1/2"
- Sq Ft Per Piece: 0.92
- Thickness: 1/4"
- Color: Royal Blue
- Finish: Glossy
For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls, Exterior Floors
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
MAINTENANCE & CARE
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Tile Maintenance and More
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Specifications:
- General Name: Marble Mosaic Tile
- Collection: White Oak Marble
- Name: WOM
- SKU: WOMM6DIA-H
- Type: Mosaic Tile
- Size: 12"x11-1/2"x3/8"
- Chip Size: 5-1/4"x3" Big Diamond
- Finish: Honed
- Application: Wall and Floor
- Botticino Super Light Cream Marble Tile - Tumbled
- Add a touch of imperial grandeur to your space with Botticino Cream Super Light Marble Tile.
- If you want your home's kitchen and bathrooms should reflect your elegant taste, Botticino Cream Marble Tiles offer a perfect solution.
Thula Home is recommending this marble is for both residential and commercial projects including flooring and countertops. Spectacular shine makes marble very attractive in both more seasoned homes and new development.
A modern and luxurious look for both floor and wall applications, this selection of premium marble tile hails from Turkey, the global center of marble tile production. A sophisticated choice for spaces like kitchens, bathrooms, living areas, and beyond.
- Botticino Super Light Cream Marble Tiles' feature:
- Authentic, premium grade Turkish marble; Lightest color beige marble still with richly varied light beige tones.
- Tumbled edges; a tumbled finish that provides an old antiquated finish that the rives can do in million years.
- Great to use in spaces from entranceways, to hallways, to kitchens, bathrooms, and more.
- Versatile applications for marble tile flooring and wall tile; create a subtle tonal backdrop on all kinds of horizontal and vertical surfaces, indoors and out.
- Botticino Cream Marble Tiles do not have mesh backing and epoxy fillers. That shows the durability of this white marble tile.
- Installation options offering more freeze resistance than travertine, these marble tiles are suitable for both floor and wall applications both indoors and out; seal after installation.
- Easy to clean for routine maintenance and spills you catch quickly, warm, soapy water is the best for the job.
- Eco-conscious manufacturing factory uses solar panels for electricity, and diamond saws cut stones by using recycled water.
- Color:Carrara Marble (white background with grey veins) and Nero Marquina Marble (black)
- Thickness:5/16 inch
- Finish:Honed
- Ships From:Southern California or Eastern New Jersey, Usually ships in 1 to 5 business days
Feature:
- First Quality, Carefully Selected, Consistent in size and finish
- Factory Direct, Meets your needs at a very low cost
- Natural Beauty, Natural stone does vary in pattern and color, so each piece will be unique, which is part of what makes natural stone such a beautiful and interesting material. The picture is representative of one piece of stone and your product may look different.
- Stone Center Online offers custom packaging on all orders to ensure your order will arrive ready to be installed and without any problems. We are the only natural stone company that offers this service to you @ no additional charge. You can order small quantities based on your project needs or larger quantities which are readily available in both full pallets and containers.
- Size: 1 3/4 x 3 1/2 inch pieces mounted on 12 1/4 x 12 1/4 (1 sq. ft.) sturdy mesh tile sheet
- 10 rows and 3 columns with 30 stones and 30 dots per sheet
- 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- Size: 10.43 x 10.43 inch;
- Thickness: 5/16 inch;
- Finish: Honed (Matte);
- Mosaic Porcelain Tile Mancala Pebble Series - Sea Pebble
- Pool Rated for use in Swimming Pools
- ** Price per Sheet ***
- Material: Handmade Porcelain
- Piece Size: 11 1/2" x 11 1/2"
- Sq Ft Per Piece: 0.92
- Thickness: 1/4"
- Colors: Multi
- Finish: Glossy
- Suited for: Residential, Commercial, Light Commercial
- For use in
- Pools, Pool Liners
- Interior Dry Walls
- Interior Floors
- Shower Walls, Shower Floors
- Exterior Walls, Exterior Floors
- Pool rated and acceptable for use on shower walls.
- The polyurethane cord backing makes installation easy.
- For use in Pools, Pool Liners, Shower Walls, Interior Dry Walls
- Installation Guide
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials & Methods:
- Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.
- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
- Maintenance & Care
- Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
- Tile Maintenance and More
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Specifications:
- General Name: Marble Mosaic Tile
- Collection: Lantern
- Name: White Oak
- SKU: MM 9202
- Type: Mosaic Tile
- Size: 12"x10-1/2"
- Chip Size: 3"x3" Arabesque
- Finish: Polished
- Application: Wall and Floor
- Size: 10.43 x 10.43 inch;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- Size: 11.34 x 9.84 inch;
- Thickness: 5/16 inch;
- Finish: Honed (Matte);
- Botticino Super Light Cream Marble Tile - Tumbled
- Add a touch of imperial grandeur to your space with Botticino Cream Super Light Marble Tile.
- If you want your home's kitchen and bathrooms should reflect your elegant taste, Botticino Cream Marble Tiles offer a perfect solution.
Thula Home is recommending this marble is for both residential and commercial projects including flooring and countertops. Spectacular shine makes marble very attractive in both more seasoned homes and new development.
A modern and luxurious look for both floor and wall applications, this selection of premium marble tile hails from Turkey, the global center of marble tile production. A sophisticated choice for spaces like kitchens, bathrooms, living areas, and beyond.
- Botticino Super Light Cream Marble Tiles' feature:
- Authentic, premium grade Turkish marble; Lightest color beige marble still with richly varied light beige tones.
- Tumbled edges; a tumbled finish that provides an old antiquated finish that the rives can do in million years.
- Great to use in spaces from entranceways, to hallways, to kitchens, bathrooms, and more.
- Versatile applications for marble tile flooring and wall tile; create a subtle tonal backdrop on all kinds of horizontal and vertical surfaces, indoors and out.
- Botticino Cream Marble Tiles do not have mesh backing and epoxy fillers. That shows the durability of this white marble tile.
- Installation options offering more freeze resistance than travertine, these marble tiles are suitable for both floor and wall applications both indoors and out; seal after installation.
- Easy to clean for routine maintenance and spills you catch quickly, warm, soapy water is the best for the job.
- Eco-conscious manufacturing factory uses solar panels for electricity, and diamond saws cut stones by using recycled water.
Water-jet mosaic composed of Thassos marble and Mother-of-Pearl in a wave-like pattern.
** Price per Sheet **
- Technical –
- Material: Thassos marble and Mother-of-Pearl
- Sheet Size: 8 3/4" x 11"
- Thickness: 3/8"
- Sq Ft Per Piece: 0.67
- Colors: White Natural
- Uses: Residential, Commercial, Light Commercial, Interior Dry Walls
- Can install the residential shower when sealed.
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
- Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.
- Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
- Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
- Maintenance & Care –
- Required to use PH Neutral Cleaner to clean the tile and grout, such as Grout & Tile Neutral Cleaner
- Tile Maintenance and More
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Add a touch of imperial grandeur to your space with Champagne Pearl Tumbled Limestone Tile. If you want your home's kitchen, bathrooms or gardens should reflect your elegant taste, Champagne Pearl Limestone Tiles offer a perfect solution. Tumbled Limestone Tiles are carved by the experts. As a result of that bring elegance in all kinds of spaces from kitchens and bathrooms to living areas. Thula Home Champagne Pearl Limestone Tile reflects an alternative in the ground surface and wall tile. We are recommending this limestone is for both residential and commercial projects including flooring and countertops. Spectacular shine makes limestone very attractive in both more seasoned homes and new development. A modern and luxurious look for both floor and wall applications, this selection of premium limestone tile hails from Turkey, the global center of limestone tile production. A sophisticated choice for spaces like kitchens, bathrooms, living areas, and beyond.
Champagne Pearl Limestone Tile's feature;
- Authentic, premium grade Limestone with White color.
- Tumbled edges; a tumbled finish that provides an old antiquated finish that the rives can do in million years.
- Great to use in spaces from entrance ways, to hallways, to kitchens, bathrooms, gardens and more.
- Versatile applications for limestone tile flooring and wall tile; create a subtle tonal backdrop on all kinds of horizontal and vertical surfaces, indoors and out.
- Champagne Pearl Limestone Tiles do not have mesh backing and epoxy fillers. That shows the durability of this limestone tile.
- Installation options offer to save your time, these limestone tiles are suitable for both floor and wall applications both indoors and out; seal after installation.
- Easy to clean for routine maintenance and spills you catch quickly, warm, soapy water is the best for the job.
- Eco-conscious manufacturing factory uses solar panels for electricity, and diamond saws cut stones by using recycled water.
Samples are generally in 4"x4" size. Thickness might vary depending on the thickness of the actual product. For example, if you are ordering a sample of 18"x18"x1/2" and this particular SKU has another size variation in 12"x12"x3/8" your sample thickness might be either ½" or 3/8" We aim to show you a little bit of color variation in the material. We mostly ship our sample orders with FedEx and it takes around 3-5 business days after your order date. If you would like to order full-size samples that are also possible, please contact us and we will provide the shipping cost for full-size samples.
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.76
- Thickness: 3/8"
- Colors: Blue
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Daisy Blue Daisy Blue 10 X 11.25 Luxury Mosaic
- 0.78 SqFt Each
- 10 Pieces Per Box
- 7.81 SqFt Per Box
- Product Sold By The Piece
- Daisy Series-Daisy Blue 10x11.25 (10pc/bx) (72bx/plt) (0.781sf/pc)
- Suggested Grout Color: Bostik Dimension Diamond H600
- Type: mosaic
- Size: 10" x 11.25"
- Pc/sf/box: 10pc / 7.81sf
- Size: 10" x 11.25" sqft/pc: 0.78sqft Width: 10 Depth: 11.25
- 0.93 square foot per piece, each piece sold individually. Piece weight equals 2.65 lbs.
- Grade 1, first-quality glass tile for floor and wall use
- 10.13 in. width x 12.88 in. length x 0.27 in. thick mesh-mounted mosaic
- Unglazed, smooth finish with a mixed finish and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Imported
- 8.6 square feet, 10 pieces per case. Case weight is 17.6 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.25 in. width x 11.88 in. length x 0.24 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a low sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
- Color: Carrara Marble (white background with grey veins) and Nero Marquina Marble (black)
- Thickness: 5/16 inch
- Finish: Polished
- Ships From: Southern California or Eastern New Jersey, Usually ships in 1 to 5 business days
Feature:
- First Quality, Carefully Selected, Consistent in size and finish
- Factory Direct, Meets your needs at a very low cost
- Natural Beauty, Natural stone does vary in pattern and color, so each piece will be unique, which is part of what makes natural stone such a beautiful and interesting material. The picture is representative of one piece of stone and your product may look different.
- Stone Center Online offers custom packaging on all orders to ensure your order will arrive ready to be installed and without any problems. We are the only natural stone company that offers this service to you @ no additional charge. You can order small quantities based on your project needs or larger quantities which are readily available in both full pallets and containers.
- Color: Carrara White Marble (white gray field background with a light gray veining and the patterning is usually soft and feathery);
- Size: 1.77x3.07 inch rhombus pieces mounted on 11 x 10 (0.77 sq. ft.) sturdy mesh tile sheet; 36 stones per sheet; 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Honed (Matte);
- 11.0 square feet, 10 pieces per case. Case weight is 21.6 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 12.38 in. width x 12.38 in. length x 0.2 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and slight variation in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Indonesia
- MARBLE PEBBLES MOSAICS HEART SHAPE - AMBER
- Light and Dark Emperador mixed with Marfil marble in heart shape mosaic
- Material: Marble
- Sheet Size: 12" x 12"
- Thickness: 3/8"
- Colors: Amber
- Finish: Polished finish
Can install the residential shower when sealed.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
Maintenance & Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Specifications:
- General Name: Marble Mosaic Tile
- Collection: Carrara White Marble
- Name: CWM
- SKU: CWMM1TRI
- Type: Mosaic Tile
- Size: 12"x10-3/4"x3/8"
- Chip Size: Triangle
- Finish: Polished
- Application: Wall and Floor
*** Price is per Sheet (1.17 sq ft) ***
- Material: Nero Marquina Marble and Stainless Steel 304
- Sheet Size: 12" x 14"
- Sq Ft Per Piece: 1.17 sq ft
Approximate Piece Size:
- Thickness: 1/4"
- Recommended Grout Joint: 3/32"
- Stone Characteristics: Clean stones with no geological imperfections or fissures. Filling or patching is not necessary for these stones.
- Color Variation: Background color contains small variations.
- Colors: Black Gold
- Finish: Polished
- Made in: Italy
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Our Collection presents a high degree of shade variance inherent in natural stone products. If consistent color is required, we recommend purchasing 25% more product to achieve the greatest uniformity possible. Should you require a uniform appearance, we suggest looking into porcelain mosaic alternatives
*** PRICE PER SHEET ***
Crackle glass offers a rustic look that can hold up to the most modern designs. This new series is beautifully composed of five pleasing colors and two stylish shapes. Replacing old with new, we have increased durability and technical standards to provide a lasting product. Being lighter, stronger and more cost effective, paired with elegant colors and shapes, we hope to see these items in your home for years to come.
This new series captures the benefits of an eco friendly product in a new, design worthy format
Sealing is required.
- Material: Porcelain and Glass
- Piece Size: 11.5"x9.5"
- Individual Size: 2"x2"
- Sq Ft Per Piece: 0.75
- Thickness: 3/8"
- Colors: White
- Backing: Mesh
- Finish: Polished
Usage:
Use for Interior residential walls, Interior residential floors, Interior commercial, Backsplashes, Shower Wall, Shower Floor, Fireplace surrounding, Exterior WallNotes Terrazzo is an artisanal product; for this reason, there may be slight shades that are not considered a defect of the material but a characteristic.
Installation Guide
Always refer to the TCNA and or the ANSI publications for specific installation standards, always use an accredited licensed contractor experienced in the art of installing mosaic products.
Installation recommendation/Applications
Sealing is required. We recommend a water-based water repellent treatment on all products. The sealer must be suitable for natural stone, and we suggest applying it before and after grouting.
We recommend traditional cementitious grouts, but modern two-component epoxies can also be used by carefully following the manufacturer's instructions.
Applications:
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
Size:
- 1.6 x 1.6 inch pieces and 0.4 inch wide strip pieces mounted on 11.10 x 11.10 (0.86 sq. ft.) sturdy mesh tile sheet
- 3 rows and 6 columns with 90 stones per sheet
- 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Honed (Matte);
- Premium Grade Carrara White Marble Square Ventura Carlyle Geometry Mosaic Tiles. Italian Carrara Venato Bianco Carrera White Marble Honed 2 inch Square Ventura Carlyle Geometry Mosaic Wall and Floor Tiles are perfect for any interior projects. The 2 inch Carrara White Marble Square Ventura Diamond Mosaic tiles can be used for a kitchen backsplash, bathroom flooring, shower surround, dining room, entryway, spa. Our timeless Matte White Carrera Marble Carlyle Geometry Linear Mosaic tiles with a large selection of coordinating products is available and include arabesque, fish scale, penny round, herringbone, basketweave mosaics, 12x12, 18x18, 12x26, subway tiles, moldings, borders, and more.
- Recycled Glass
- 11 sheets per pack
- White Finish
- Shape: Diamond
- Mesh-mounted
- Glazed, Glossy Finish
- Vitreous tile has water absorption of more than 0.5% but less than 3% for indoor use and some outdoor applications
- V2 slight variation
- Made from marble with a geometric tile visual
- Polished finish with a high sheen and slight variation in tone gives the tile a slightly varied appearance
- Impervious flooring has water absorption of less than 0.5%
- Completely frost resistant for indoor or some outdoor applications; use a latex-modified thinset for acceptable bond strength
- This is a GREENGUARD Indoor Air Quality Certified and GREENGUARD Children and Schools Certified product
- To ensure consistency of size and color, please capture all tiles for a project within one order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes
- Ceramic/porcelain, LVT and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size
- Installation
- Designed for multiple applications, including floors and walls
- Comes mounted on mesh-backed sheets for a simplified installation and professional finish
- Able to be used in residential or commercial locations
Size: 2.17 x 3.74 inch pieces, 0.4 inch wide strips and 0.4 inch dots mounted on 12 x 11.14 (0.93 sq. ft.) sturdy mesh tile sheet8 rows and 3 columns with 80 stones per sheet1/16 inch grout width;
Thickness: 5/16 inch;
Finish: Polished (Glossy);
Premium Grade Athens Silver Cream White Wood Vein Haisa Light Marble Diamond Lattice Mosaic Tiles w/ Thassos White Athens Gray. Athens Silver Cream Light Haisa Marble Polished Diamond Lattice Mosaic Wall and Floor Tiles are perfect for any interior projects. The Athens Silver Cream Global Grey Marble Diamond Lattice Mosaic tiles can be used for a kitchen backsplash, bathroom flooring, shower surround, dining room, entryway, spa. Our timeless Glossy Athens Silver Cream Wooden Grain Marble Diamond Lattice Mosaic tiles with a large selection of coordinating products is available and include arabesque, fish scale, penny round, herringbone, basketweave mosaics, 12x12, 18x18, 12x40, subway tiles, moldings, borders, and more.
- 9.0 square feet, 10 pieces per case. Case weight is 22.5 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.5 in. width x 12.13 in. length x 0.25 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- WARNING: Silica dust is harmful if inhaled. Exposure to silica dust from cutting, grinding, or polishing can cause acute lung injury, silicosis or cancer. Wear a respirator when cutting, grinding, or polishing. Use wet cutting methods and do not dry cut. Children should not be present during cutting, grinding or polishing.
- Country of Origin: Thailand
- With the ceramic mosaic wall tile, it's easy to add a splash of contemporary styling to your decor
- This attractive tile features diamond patterned pieces of glazed ceramic arranged on a 12-1/4" x 12-13/16" mesh sheet that makes installation a much easier process
- With trendy shades, this glossy ceramic creates a distinct pattern for various install projects in bathrooms, kitchens and other residential or commercial spaces
- Grade 1, ceramic mosaic tile
- Glossy finish with a high sheen and a slight variation in tone
- Semi-Vitreous flooring has water absorption of more than 3% but less than 7% for indoor use
- Not frost resistant
- This is a Greenguard Indoor Air Quality Certified and Greenguard Children and Schools Certified product
- MARBLE PEBBLES MOSAICS HEART SHAPE - CALACATTA GOLD HONED
- Calacatta Gold Honed Calacatta and Thassos Marble in heart shape pieces
- Material: Marble
- Sheet Size: 12"x12"
- Thickness: 3/8"
- Colors: Gold, White and Grey
- Finish:Honed finish
Can install the residential shower when sealed.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish