FREE shipping on orders over $49!* Details
"Carriage Garage Door" – search in Products
Sort by:
Price
43 Results
1/2"x16" Torsion Spring Winding Rodsby Prime-Line Products(1003)
$25
This pair of torsion spring winding rods is constructed of hard drawn wire and come in 1/2 in. outside diameters x 16 in. lengths. When adjusting or replacing garage door torsion springs, it is important that these tasks are not attempted with any other tools other than with these rods. Failure to use these rods when replacing or making adjustments to torsion springs may result in personal injury and property damage. This item consists of two identical 1/2 in. x 16 in. rods which are designed specifically for increasing (winding) and decreasing (unwinding) the tension on garage door torsion springs, and they are the only tools recommended for this purpose. Note: Winding cones should be wound and unwound 1/4 turn at a time. Not for use on winding cones larger than 33/64 in. in diameter.
- Used to wind and unwind tension on torsion springs
- 16 in. length
- 1/2 in diameter
- Steel construction
- Only use these tools when winding or unwinding a tension spring
- Easy to use
- Sold as a pair
- For further dimensional information, please see the line drawing
Roll Grip Handle, 5-1/2" Holes On Centerby Prime-Line Products(9)
$24
This garage door lift handle is constructed from galvanized steel. It has 5-1/2 in. hole centers and a 4 in. open grip and can be used in a vertical or horizontal position. This style handle replaces most handles currently in use.
- Replaces most lift handles currently in use
- Can be used in vertical or horizontal positions
- 4 in. open grip
- Galvanized steel construction
- For further dimensional information, please see the line drawing
Door Rollers, 1-7/8" Diameter Plastic, 2Packby Prime-Line Products
$18
This garage door roller is constructed from high impact plastic. It performs well in all weather environments with quiet, trouble free operation. The roller has a 1-7/8 in. diameter and a 3-1/2 in. stem length.
- Outstanding performance in all weather environments
- 3-1/2 in. stem length
- 1-7/8 in. diameter wheel
- High impact plastic roller
- For further dimensional information, please see the line drawing
4", Pulley with Strap and Axle Boltby Prime-Line Products(40)
$22
This is a 4 in. heavy-duty galvanized steel pulley, with galvanized steel strap. Made of case hardened steel race with steel ball bearings. Comes factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to support steel cables up to 3/16 in. diameter.
- Used to support 3/16 in. steel cables
- Comes factory lubricated
- Pulley with strap and axle bolt
- Heavy duty galvanized steel
- 4 in. outside diameter roller
- Can be used at stationary or spring pulley positions
- Easy to install
- For further dimensional information, please see the line drawing
AS600BACK Swing Gate Operator Solar Compatible Gate Opener and Backup Kitby Aleko Products(3)
$573
Free Shipping
Product Description:
- ALEKO AS600 Single Swing Gate Operator is designed for residential and commercial
- Applications. It is aimed to improve your comfort level and it allows you to stay warm and dry in your vehicle.This Single Sing Opener will handle dual swinging gate up to 10 ft in length and weighing up to 660 lbs. ALEKO AS600 has a powerful 24VDC motor, which provides exceptional staring torque and feature soft start and stop operation.This promotes longer gate and operator life, as well as dependable performance. No power? No problem! Optional Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss. To simplify installation, ALEKO AS600 Single Swing Gate Operator may be installed with low-cost, low-voltage wiring or in remote locations using our optional 10W and/or 20W Solar Panel.
What is in the Box:
- 1 (One) Actuator
- 1 (One) Control Box
- 2 (Two) 8 1/2'' x x11'' Warning Sings
- 2 (Two) Release keys
- 2 (Two) 433MHz remotes LM122
- 1 (One) Set of accessories and mounting hardware for easy installation
- 1 (One) User Manual with step by step installation instructions
- 1 ALEKO LM135 24V Adapter/Battery Charger
- 1 Set 2x12AH Batteries LM125
- 1 ALEKO LM130 Battery Box for 2x12AH Batteries
- Wire is Sold Separately
3" dia., Case-Hardened Steel. Pulley with Straps and Axle Bolts, 2Packby Prime-Line Products(430)
$25
This pulley and strap is constructed from heavy duty galvanized steel. It features a case hardened steel race and comes factory lubricated. It can be used at stationary or spring pulley positions.
- Used at stationary or spring pulley positions
- Comes lubricated from the factory
- 5/16 in. channel, from inside wall to inside wall
- Heavy duty galvanized case-hardened steel
- 2-pack
- Steel ball bearing ensure a smooth and fluid operation
- Pulley with strap and axle measures 3 in. diameter
- For further dimensional information, please see the line drawing
Garage and Shed Lock, tamper-proofby Prime-Line Products(142)
$31
This is a heavy gauge zinc plated steel lock. Features a tamperproof cover plate. It can be used with surface mount or mortise bolt keepers. Used with a variety of locks.
- Heavy gauge steel construction
- 2 keepers allows for surface mount or mortise use
- Requires the use of a padlock
- Tamperproof cover plate
- For further dimensional information, please see the line drawing