Cedar Stains and Varnishes

Highlights:

• Size: 5 Gallon
• Color: Clear
• 275 VOC G/L
• Penetrates deep into wood for long lasting protection
• Restores natural beauty to weathered wood
• Protects against sun and moisture
• For wood decks, siding, shakes, shingles, furniture and playsets
• Use on pressure treated pine, cedar and redwood that has weathered for one year
• Mildew resistant finish
• Protects from the inside out
• Designed to revitalize weather-beaten, dried-out decks and restore the rich, warm appearance of natural wood
• Protects against damages caused by moisture and ultraviolet rays, and provides a mildew-resistant finish that won't crack, peel or flake
• Soap and water cleanup
• Can

Highlights:

• Size: 5 Gallon
• Finish: Clear
• For fences, decks & siding
• A clear, penetrating finish that protects exterior wood from water damage
• A rich oil that enhances the natural beauty of exterior wood
• Easy application with garden sprayer, brush, or roller
• Film resists mildew
• For vertical or horizontal wood surfaces
• Can

• Size: 1 gallon
• Cedar
• Semi-Transparent
• Penetrating, acrylic/oil formula offers great protection
• Stain + Sealant in One protects and beautifies in one step
• Enhanced waterproofing protection
• Advanced SunBlock UV defense ensures long lasting, beautiful color
• Exclusive Scuff Guard technology protects the surface
• Provides a mildew resistant coating
• Backed by the Good Housekeeping Seal
• Weather-Ready Application – allows greater opportunities for staining. You can clean and stain on the same day, even after rain.

• 1 Gallon
• Prevents water damage.
• Beads & waterproofs.
• Allows wood to gray naturally.
• Exceeds all federal waterproofing standards for wood, concrete and brick:
• Wood: exceeds industry standard ASTM D-4446 for waterproofing wood.
• Concrete: exceeds federal specification TT-C-555B for resistance to wind-driven rain.
• Brick: exceeds federal specification SS-W-110C for water repellency on brick.
• Use on: decks & fences, brick patios, concrete driveways, exterior surfaces.
• Use when mildew/biological factors are not a problem.

Directions for use:

• Allow 30 days before applying on new pressure treated lumber.
• Be sure that both surface and air temperatures are about 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.
• Perform the splash test. Sprinkle water on various sections of surface to be sealed. If water absorbs and darkens color of surface within five seconds, surface is porous and considered ready to be treated. If water beads up or otherwise sits on top of surface, then surface does not need protection at this time.
• Cover plants and shrubs. Move all objects that could come in contact with overspray. Wet overspray of product can be removed by flushing immediately with water. Dried overspray can be removed with paint thinner or mineral spirits.
• Do not use in below grade application where water pressure is a problem, or on painted or recently stained surfaces.
• DO NOT USE AS AN ADDITIVE TO PAINT
• Protect product from freezing. Do not store below 32°F. In case of accidental freezing, call The Thompson's Company Help Line.

Application:

• Do not mix with other waterproofing products; variations in the final appearance may result.
• Do not thin.
• Concrete/Stucco must be completely cured (minimum of thirty days) and dry.
• Shake contents well before use.
• A small trial patch should be tried before application over the entire surface.
• Only one light coat is necessary in most applications.
• Apply by brush, roller, dipping, or sprayer. A garden "pump-up" style sprayer is the simplest method. Product will appear milky white during application, but will dry clear. If puddling of product occurs, remove within 15 minutes by redistributing to dry areas or wiping off.
• Use only with adequate ventilation.
• Darkening of the surface and tackiness will result if over-applied or if overnight temperature falls below 40°F within 48 hours of application.

• Size: 1 Gallon
• Color: Natural Cedar
• One coat application
• NeverWet® Properties Inside
• Superior water repellency
• Ready for use in 48 hours
• Mildew resistant coating
• Coverage: up to 250 sq ft per gallon with one coat.

Additional Info:

Application:

• Color: Light Base
• Size: 1 Gallon
• Finish: Solid Matte
• Provides a more dirt and mildew resistant finish than standard flat-finish stains
• Ideal for all vertical and, especially, for high-traffic horizontal surfaces
• Water-repellent
• Exceptional UV resistance to slow color fade
• Self-priming on most bare or previously coated surfaces
• Water based technology
• Soap and water clean up.

Specifications:

• Transparency: Solid
• Sheen: Low Luster
• Technology: Water based
• Usage: All types of exterior wood, except exotic hardwood
• Recommended for: Decks, Siding, Trim, Shakes, Shingles, Fences, Logs, Garage Doors, Outdoor Furniture
• Clean Up: Soap and Water
• Dry Time: (At 77º F (25º C) and 50% relative humidity) Dries to touch in approximately 3 hours, To light foot traffic in 24 to 48 hours, Wait 72 hours before replacing furniture
• Number of coats: 2