Hammered and 5-Inch Cabinet and Drawer Hardware

Add a bold new look to your cabinets or drawers with these stylish pulls, guaranteed to impress and leave your guests in awe. Each pull is individually packaged to prevent damage to the finish. Standard #8-32 x 1-inch installation screws are included.
Length: 5 inches - Width: 3/4 inches - Projection: 7/8 inches - Screw Spacing: 3-3/4 inches - Finish: Oil Rubbed Bronze

• Farmhouse Wrought Iron Cabinet Pull 4inch
• Dimensions- 5 1/4"L overall x 1 1/2"W overall (4" long pull.)

About as simple as it gets. With such a simple design it can work in many styles of d?cor. These pulls have a simple bent pull attached to hammered back plates. Color matching hammered slotted screws included.

Price is for 10 pulls.

• Manufacturer: Cosmas
• MPN: 702-4HB
• Color/Finish: Hammered Bronze
• Type: Pull
• Hole Centers/Spacing: 4"
• Length: 5-1/4"
• Width: 5/8"
• Projection: 1-1/8"
• Mounting Hardware: 8/32" thread x 1" long screws included

Unique textures that will beautify your cabinetry. Choose timeless, handmade beauty from any of Sietto’s lines, and elevate your décor from distinctive to one-of-a-kind.

• Farmhouse 4" Iron Straight Pull HPS64 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 3/16"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

Unique textures that will beautify your cabinetry. Choose timeless, handmade beauty from any of Sietto’s lines, and elevate your décor from distinctive to one-of-a-kind.

Unique textures that will beautify your cabinetry. Choose timeless, handmade beauty from any of Sietto’s lines, and elevate your décor from distinctive to one-of-a-kind.

Beautiful profile parts with a lightly hammered textued and profiled edge. Pull sizes include 128mm, 160mm, 320mm, and 320mm Wide. Overall lengths are 5 1/2", 6 3/4", and 12 1/2" respectively. Pull width is 1/2" and projection is 1 1/4". The 320/W pull has a 2 5/8" width with a 1 1/4" projection. Available in Light Bronze and White Bronze.

Beautiful profile parts with a lightly hammered textued and profiled edge. Pull sizes include 128mm, 160mm, 320mm, and 320mm Wide. Overall lengths are 5 1/2", 6 3/4", and 12 1/2" respectively. Pull width is 1/2" and projection is 1 1/4". The 320/W pull has a 2 5/8" width with a 1 1/4" projection. Available in Light Bronze and White Bronze.

Unique textures that will beautify your cabinetry. Choose timeless, handmade beauty from any of Sietto’s lines, and elevate your décor from distinctive to one-of-a-kind.

• Farmhouse 4" Iron Twisted Pull HPT64 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 3/16"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

Beautiful profile parts with a lightly hammered textued and profiled edge. Pull sizes include 128mm, 160mm, 320mm, and 320mm Wide. Overall lengths are 5 1/2", 6 3/4", and 12 1/2" respectively. Pull width is 1/2" and projection is 1 1/4". The 320/W pull has a 2 5/8" width with a 1 1/4" projection. Available in Light Bronze and White Bronze.

Price is for 10 pulls.

• Manufacturer: Cosmas
• MPN: 702-96HB
• Color/Finish: Hammered Bronze
• Type: Pull
• Hole Centers/Spacing: 3-3/4"
• Length: 5-1/16"
• Width: 5/8"
• Projection: 1-1/8"
• Mounting Hardware: 8/32" thread x 1" long screws included

Beautiful profile parts with a lightly hammered textued and profiled edge. Pull sizes include 128mm, 160mm, 320mm, and 320mm Wide. Overall lengths are 5 1/2", 6 3/4", and 12 1/2" respectively. Pull width is 1/2" and projection is 1 1/4". The 320/W pull has a 2 5/8" width with a 1 1/4" projection. Available in Light Bronze and White Bronze.

Beautiful profile parts with a lightly hammered textued and profiled edge. Pull sizes include 128mm, 160mm, 320mm, and 320mm Wide. Overall lengths are 5 1/2", 6 3/4", and 12 1/2" respectively. Pull width is 1/2" and projection is 1 1/4". The 320/W pull has a 2 5/8" width with a 1 1/4" projection. Available in Light Bronze and White Bronze.

Beautiful profile parts with a lightly hammered textued and profiled edge. Pull sizes include 128mm, 160mm, 320mm, and 320mm Wide. Overall lengths are 5 1/2", 6 3/4", and 12 1/2" respectively. Pull width is 1/2" and projection is 1 1/4". The 320/W pull has a 2 5/8" width with a 1 1/4" projection. Available in Light Bronze and White Bronze.

Hickory Hardware's Craftsman collection takes its inspiration from the works of manual laborers who have produced creations with their own hands. This Craftsman pull is a strong, robust pull for your projects or rooms that need powerful statements. It will fortify the hearty interior design that you have created for your home.

• Spanish Spade 4" Iron Twisted Pull HPT34 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Spanish Fleur De Lis Slim 10" Iron Twisted Pull HPT110 (rear mount pull)
• Dimensions: 11 1/4"L x 1 3/4"D x 1 1/2"W or 1 3/16"W (depending on back plate configuration.) Overall
• Center to center hole may vary 1/16" due to the handmade nature of the product. Handle is 10" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. High quality handle. Made in USA.

• Farmhouse Wrought Iron Cabinet Pull 4inch
• Dimensions- 5 1/4"L overall x 1 1/2"W overall (4" long pull.)

About as simple as it gets. With such a simple design it can work in many styles of d?cor. These pulls have a simple bent pull attached to hammered back plates. Color matching hammered slotted screws included.

• Spanish Club 4" Iron Twisted Pull HPT14 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

The Arts & Crafts cabinet pull coordinates beautifully with craftsman and transitional styles and features an attractive hammered design.

• Includes 1-inch screws for easy and quick installation.
• 3-inch and 96-millimeter hole spacing makes it the perfect fit for any cabinet, dresser or drawer.
• Measures 5 1/8 inches by 3/4 inch overall with a 7/8-inch projection.

Spec sheet for Arts & Crafts 3-inch/96-millimeter Cabinet Pull

• Rustic Star 4" Iron Twisted Pull HPT54 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Rustic Diamondback 4" Iron Twisted Pull HPT44 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Spanish Fleur De Lis 4" Iron Twisted Pull HPT14 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

These mortise cup closet door pulls are constructed of stamped steel and they come in a chrome plated finish. The outside diameter of these pulls measures 2-1/8 in. and they have a depth of 5/16 in.. These mortise cups rest flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and they are used by a variety of manufacturers. This item includes 5 pulls and 10 nails per pull. *Installation Tip: To avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place.

• These stamped steel mortise cup pulls are designed for use on by-passing closet door systems
• These closet door pulls have a 2-1/8 in. outside diameter and a depth of 5/16 in.
• Chrome plated finish
• Stamped steel construction
• Includes small fasteners

• HPR40 (4"model)
• Dimensions: 1"wide x 5 3/4"long x 1 3/4"deep overall (handle is 4" long) Wax finish is recommended for interior use only.

These 4" cabinet pulls are hand crafted one at a time in our studio. 3/8" bar attached to a full hammered 11 ga. thick back plate. Comes with color matched hammered slotted screws. Your choice of finish. This design is offered in other sizes which can be found in our other listings.