Bushere & Son Iron Studio Inc. 5-Inch Cabinet and Drawer Hardware

• Farmhouse 4" Iron Twisted Pull HPT64 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 3/16"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Farmhouse Wrought Iron Cabinet Pull 4inch
• Dimensions- 5 1/4"L overall x 1 1/2"W overall (4" long pull.)

About as simple as it gets. With such a simple design it can work in many styles of d?cor. These pulls have a simple bent pull attached to hammered back plates. Color matching hammered slotted screws included.

• Farmhouse Wrought Iron Cabinet Pull 4inch
• Dimensions- 5 1/4"L overall x 1 1/2"W overall (4" long pull.)

About as simple as it gets. With such a simple design it can work in many styles of d?cor. These pulls have a simple bent pull attached to hammered back plates. Color matching hammered slotted screws included.

• Spanish Fleur De Lis Slim 10" Iron Twisted Pull HPT110 (rear mount pull)
• Dimensions: 11 1/4"L x 1 3/4"D x 1 1/2"W or 1 3/16"W (depending on back plate configuration.) Overall
• Center to center hole may vary 1/16" due to the handmade nature of the product. Handle is 10" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. High quality handle. Made in USA.

• Rustic Star 4" Iron Twisted Pull HPT54 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Farmhouse 4" Iron Straight Pull HPS64 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 3/16"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Spanish Club 4" Iron Twisted Pull HPT14 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Spanish Spade 4" Iron Twisted Pull HPT34 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• HPR40 (4"model)
• Dimensions: 1"wide x 5 3/4"long x 1 3/4"deep overall (handle is 4" long) Wax finish is recommended for interior use only.

These 4" cabinet pulls are hand crafted one at a time in our studio. 3/8" bar attached to a full hammered 11 ga. thick back plate. Comes with color matched hammered slotted screws. Your choice of finish. This design is offered in other sizes which can be found in our other listings.

• Rustic Diamondback 4" Iron Twisted Pull HPT44 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.

• Spanish Fleur De Lis 4" Iron Twisted Pull HPT14 (rear mount pull)
• Dimensions: 5 3/8"L x 1 3/4"D x 1 1/2"W or 1 1/4"W (depending on back plate configuration.) Overall
• Center to center hole is approx. 3 7/8". May vary 1/16" due to the handmade nature of the product. Handle is 4" long.

These iron cabinet pulls are forged, bent and tapped from a solid 3/8" square iron bar one at a time. Thick 1/8" hammered mounting plates included for that unique look on your cabinets. The back plate may be used in 2 different configurations. Or you don't even have to use the plates at all for a simple look. This is a rear mount handle. Mounting bolts included with each order. Made in USA.