Fully Assembled Ceiling Fans with Black Blades

Swish shatters the mold for traditional ceiling fans. It was designed by this century's most famous industrial designer, Karin Rashid. Its soft, sensual style creates a chic atmosphere for modern interiors. The LED light of the Swish also comes with 32 levels of adjustable brightness. Swish has a DC motor which makes it both energy efficient and completely noise free.

Sweeping arcs define this fan, designed for contemporary and refreshing upgrades. The central housing is domical, from which a trio of uniquely curved fan blades smoothly rotate. Available in Satin Nickel with Silver blades and Black with two-tone Walnut/Black blades, the Cupola also features an LED integrated dome shape or a 2 lamp light kit with a domical glass to create a perfect sphere.

The Basic-Max ceiling fan features the ability to be installed three different ways: close mount, standard stem, and optional stems up to 72" long.

60 Inch High Sierra Windmill Ceiling Fan | The American - This classic tooled leather look with textured browns on blades and matte black motor and frame. Powder-coated finish.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

72 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

96 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

46 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

66 Inch High Sierra Windmill Ceiling Fan | The American - This classic tooled leather look with textured browns on blades and matte black motor and frame. Powder-coated finish.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

60 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

84 Inch High Sierra Windmill Ceiling Fan | The American - This classic tooled leather look with textured browns on blades and matte black motor and frame. Powder-coated finish.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

84 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

66 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

High Sierra Windmill Ceiling Fan | The American - This classic tooled leather look with textured browns on blades and matte black motor and frame. Powder-coated finish.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

Clean and sleek, Hover Flush is a stunning modern upgrade for any project. Available in Brushed Nickel, Graphite, Matte White, Metallic Matte Bronze or Matte Black, Hover comes equipped with integrated LED lighting and DC motor technology to deliver excellent energy efficiency. Hover Flush is so versatile; it can be used for both indoor and outdoor spaces.

• Style: Modern
• Finish: Metallic Matte Bronze
• Glass: Etched Opal
• Material: Steel

• Light Kit Included: Yes
• Light Kit Included Removable: No
• Install Sloped Ceiling: No
• Bulb(s) Included: Yes
• Light Source: Integrated LED
• Number of Bulbs: LED
• Bulb Information: 16w LED *Included
• Dimmable: Yes, CL Type Dimmer (SSL7A)
• Max Wattage: 16.00
• Voltage: 120v
• Lumens: 1320
• Color Temp: 3000.0000
• CRI: 90
• Life Span: 50000.0000

• Safety Rating: C-US Wet Rated
• Motor Type: DC
• Fan Speed: 6 Speed
• Reversing Control: Yes
• Blades Included: Yes
• Blade Count: 3
• Blade Sweep: 72
• Blade Finishes: Walnut
• Blade Material: Composite
• Blades Reversible: No
• Blade Pitch: 14
• Fan Control Included: Yes
• Receiver Included (For Fan Control): Yes
• Wifi Control Included: Yes
• Wifi Control Optional: No
• Control Type (See Installation Instructions for HIRO Details): HIRO Control - 6 Speed Reversing
• Performance Specifications: See Product Documentation PDF

72 Inch Barn Metal Windmill Ceiling Fan | The Patriot Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

72 Inch Barn Metal Windmill Ceiling Fan | The Patriot Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch Barn Metal Windmill Ceiling Fan | The Patriot Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

60 Inch Barn Metal Windmill Ceiling Fan | The American Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

66 Inch Barn Metal Windmill Ceiling Fan | The Patriot Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

46 Inch Barn Metal Windmill Ceiling Fan | The American Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Barn Metal Windmill Ceiling Fan | The American Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

60 Inch Barn Metal Windmill Ceiling Fan | The Patriot Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

66 Inch Barn Metal Windmill Ceiling Fan | The American Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

Experience an ideal blend of style and function with the Braden Collection 44-Inch 3-Blade Matte Black LED Mid-Century Modern Indoor Hugger Ceiling Fan.Three reversible plywood blades are coated in black and distressed ebony finishes for extra design versatility. The fan's center is coated in a beautiful matte black finish to accentuate its modern character.A remote control with batteries is included so you can adjust full-range dimming and fan speed without breaking a sweat. A wall bracket is also included for convenient remote storage. The fan features a larger AC motor that permits it to move more air than a traditional ceiling fan. The reversible motor offers year-round comfort by allowing you to choose from cooling downdrafts for summer or warming updrafts for winter.For ideal illumination, a dimmable LED module light source is included (18w, 3000K, 90CRI). The light source is dimmable to 10% and offers cost/energy-saving benefits. A white opal glass shade covers the light source.The ceiling fan's sleek design is ideal for any bedroom, great room, living room, or sitting room in mid-century modern, modern, and transitional style settings. Light experts recommend installing this fan in a room size that ranges from 226 to 400-square feet. Great for rooms with low ceiling heights.It's time to breathe new life into the mundane every day with timeless and truly transformative lighting. Make your purchase today to begin your journey to a whole new lighting experience. Progress Lighting products are designed for exceptional quality, reliability, and functionality.

Lighting Information:

• Bulb type: LED
• Number of bulbs: 1
• Bulb(s) included
• Bulb wattage: 18
• Hardwire