Right-Hand Entry Doorknob Sets

**Important Note** Please Read: If your installation requires a 2 3/4" Backset Latch you must request it at time of purchase or you will receive a 2 3/8" Backset latch with your order.**

This lock is a stand alone ID card access door lock. It is designed for all kinds of doors including residential homes, apartments, warehouses, airports, and office buildings. It fits most predrilled 2-3/8" or 2-3/4" backset knob-lock doors. Programming cards is very easy and takes only a few minutes. Programming cards is done by lock, no extra equipment needed. One card can be programmed to many locks. A card also can be deleted from locks. One lock can be programmed for up to 500 cards. Works with most 125khz frequency RFID cards (cards sold seperately).

The lock will mechanically automatically lock itself when the door is closed. From outside, you can turn the handle but the door will be locked. The only way to unlock the door from outside is by key or cards. From inside, just turn the handle and unlock the door. It works like a regular lock, no key or cards needed.

Main Features:

• Novel and sleek appearance
• Simple installation instead of ball style mechanical lock
• Use standby key to open lock in case of emergency
• Alert for wrong card
• Up-to-date material for stable and durable performance

Technical parameters:

• Suitable for door thickness: 35~50mm_ and standard 2 3/8" backset (2 3/4" backset is available upon request)
• Requires 4 AA 1.5V alkaline batteries (included)
• Service life of battery: approx. 20,000 times (up to two years)
• It will alarm for low power supply and can still open for approx. 50 times

Product Dimensions:

Outside:

• Length: 7 7/8"
• Width: 2 1/2"
• Depth: 1"
• Latch center to top: 4 1/2"
• Latch center to bottom: 3 3/8"

Inside:

• Length: 4"
• Width: 2 1/4"
• Depth: 3/8"
• Latch center to top: 2 1/4"
• Latch center to bottom: 1 3/4"

Package Content:

One Keyless Electronic RFID MID300 right hand lock retail box

Note:

ID cards are sold separately

How to select the correct lock:

Left-hand or right-hand lock: when looking at the door from OUTSIDE, hinges on left indicate a left hand door, hinges on right indicate a right hand door.
There are two popular backset sizes for pre-drilled doors. Measure from the handle center to the edge of the door: one size is 2-3/8" the other size is 2-3/4 ".

Keypad Entry Lock with Flex Lock with Plymouth Knob from the Plymouth Collection Interior screws are exposed Flexibility to choose; switch from automatic relocking to unlocked as needed Provides additional layers of keyless security and protection inside your home or office Ideal for garage entry doors, home offices, computer rooms, utility rooms, etc. Easily replace most existing locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box. Faceplates (Part 16-211): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates (Part 10-063): Supplied with Square Corner and Round Corner Full Lip Strike Plates (Dimensions: 2-1/4" x 1-5/8")

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The simple elegance of the Classic Deadbolt offers beauty and durability that will compliment a variety of architectural styles. Made of solid, forged brass for durability and beauty.

• Exterior and interior trim deadbolt, deadbolt latch and kit, screws to install and two keys.
• Solid forged brass for fine detail
• Complete set for one door (both sides) with 2-3/8" backset
• Perfect for restoration and easy to install on modern pre-drilled doors
• Hand assembled in USA
• 5-year warranty
• FUNCTION: SINGLE CYLINDER
• CATEGORY: Deadbolt
• ADA Rated: NO
• Door Handing (Right-Handed, Left-Handed, Non handed): Non-handed
• Projection (in.): Exterior: .72, Interior: 1.65
• Backset (in.): 2.375
• Cross Bore (in.): 2 1/8"
• Door-thickness: 1 3/4" - 2 1/4"
• Restock: 0.25
• Max Height: 2.625
• Max Width: 2.625
• Thumb Turn Diameter: 1.375
• Thumb Turn Projection: 1.65
• Trim Ring Diameter: 2.625
• Assembled Depth (With 1.75in door thickness) : 4.12
• Edge Bore Hole Diameter : 1
• Door Bore Hole Diameter: 2.125
• Strike Height: 2.25
• Strike Width: 1
• Deadbolt Throw Length: 1

Keyhole: Keyhole Alike

Keypad Entry Function with Flex Lock: This knobset is temporarily unlocked from the exterior with either the keypad or a key and then automatically relocks after five seconds. From the interior the knob is always free to open the door but does not unlock the knobset. The flex lock interior thumbturn activates and deactivates the autolock feature allowing the lock to remain unlocked if needed. This knobset is ideal for utility closets, storage rooms, basement stairways, cleaning supply closets, etc. Schlage Works for You Features: Interior screws are exposed Flex lock allows the automatic locking feature to be enabled and disabled with ease Automatic lock mode activates the lock after 5 seconds; no need to remember to relock the door Easily replace most existing locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box Faceplates (Part 16-211): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates (Part 10-063): Supplied with Square Corner and Round Corner Full Lip Strike Plates (Dimensions: 2-1/4" x 1-5/8") The handing is adjustable for both left and right handed applications Specifications: Backset: Adjustable for either 2-3/4" or 2-3/8" Crossbore: 2-1/8" Edgebore: 1" Door Thickness: 1-1/2", 1-3/4", 1-3/8", 1-5/8" Cylinder: 5 Pin Schlage C Battery Size: 9V Battery Life: 3 Years

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The precise lines of the Quadrato Entry Set provide a crisp display of modern simplicity. With meticulous corners and mathematical symmetry, the hammered texture adds keen visual interest to this square set. The superior clarity and dimensional, prismatic effect of the Quadrato Crystal knob will add visual drama to any space. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/4" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 52-3/16" Handle Projection: 2-7/16" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

• The Studio Deadbolt coordinates well with any architectural style. Made of solid, forged brass for durability and beauty.
• Exterior and interior trim deadbolt, deadbolt latch and kit, screws to install and two keys.
• Solid forged brass for fine detail
• Complete set for one door (both sides) with 2-3/8" backset
• Perfect for restoration and easy to install on modern pre-drilled doors
• Hand assembled in USA
• 5-year warranty
• FUNCTION: SINGLE CYLINDER
• CATEGORY: Deadbolt
• ADA Rated: NO
• Door Handing (Right-Handed, Left-Handed, Non handed): Non-handed
• Projection (in.): Exterior: .63
• Backset (in.): 2.375
• Cross Bore (in.): 2 1/8"
• Door-thickness: 1 3/4" - 2 1/4"
• Restock: 0.25
• Max Height: 4
• Max Width: 2.5
• Thumb Turn Diameter: 1.375
• Thumb Turn Projection: 1.55
• Assembled Depth (With 1.75in door thickness) : 3.94
• Edge Bore Hole Diameter : 1
• Door Bore Hole Diameter: 2.125
• Strike Height: 2.25
• Strike Width: 1
• Deadbolt Throw Length: 1

Keyhole: Keyhole Alike

Keypad Entry Function with Flex Lock: This knobset is temporarily unlocked from the exterior with either the keypad or a key and then automatically relocks after five seconds. From the interior the knob is always free to open the door but does not unlock the knobset. The flex lock interior thumbturn activates and deactivates the autolock feature allowing the lock to remain unlocked if needed. This knobset is ideal for utility closets, storage rooms, basement stairways, cleaning supply closets, etc. Schlage Works for You Features: Interior screws are exposed Flex lock allows the automatic locking feature to be enabled and disabled with ease Automatic lock mode activates the lock after 5 seconds; no need to remember to relock the door Easily replace most existing locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box Faceplates (Part 16-211): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates (Part 10-063): Supplied with Square Corner and Round Corner Full Lip Strike Plates (Dimensions: 2-1/4" x 1-5/8") This knobset is usable for both left and right handed applications Specifications: Backset: Adjustable for either 2-3/4" or 2-3/8" Crossbore: 2-1/8" Edgebore: 1" Door Thickness: 1-1/2", 1-3/4", 1-3/8", 1-5/8" Cylinder: 5 Pin Schlage C Battery Size: 9V Battery Life: 3 Years

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The meticulous corners and mathematical symmetry of the Quadrato Entry Set provide a crisp display of modern simplicity. The linen texture recollects a fabric favored by travelers for over a century, as well as an artist’s canvas. Add the Circolo brass knob, with its pure cylindrical shape, to impart a simple yet elegant finishing touch. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/4" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 5-1/8" Handle Projection: 2-1/8" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

Finish: Lifetime Polished Brass (003)

Equipped with Classic Lever, Right Handed.

Function: RH Keyed Entry

Performance Features

• Bethpage Sectional Trim
• Solid forged brass
• Deadbolt and latch bolt are also constructed of solid brass
• Deadbolt is furnished with specially designed reinforcing strike constructed of high grade steel for ultimate strength and durability
• Designed for easy installation in standard pre-bored wood or metal doors
• Accommodates door thickness of 1.75". Conversion kit available for 2.0" and 2.25" thick doors.

The Mission Deadbolt harkens to the Spanish Colonial period of the Western frontier, with an instantly recognizable square corner. Made of solid, forged brass for durability and beauty.

• Exterior and interior trim deadbolt, deadbolt latch and kit, screws to install and two keys.
• Solid forged brass for fine detail
• Complete set for one door (both sides) with 2-3/8" backset
• Perfect for restoration and easy to install on modern pre-drilled doors
• Hand assembled in USA
• 5-year warranty
• FUNCTION: SINGLE CYLINDER
• CATEGORY: Deadbolt
• ADA Rated: NO
• Door Handing (Right-Handed, Left-Handed, Non handed): Non-handed
• Projection (in.): Exterior: .713
• Backset (in.): 2.375
• Cross Bore (in.): 2 1/8"
• Door-thickness: 1 3/4" - 2 1/4"
• Restock: 0.25
• Max Height: 3.375
• Max Width: 2.5
• Thumb Turn Diameter: 1.375
• Thumb Turn Projection: 1.55
• Assembled Depth (With 1.75in door thickness) : 3.94
• Edge Bore Hole Diameter : 1
• Door Bore Hole Diameter: 2.125
• Strike Height: 2.25
• Strike Width: 1
• Deadbolt Throw Length: 1

Keyhole: Keyhole Alike

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

Cambridge Combo Set with Entry Set and Deadbolt Features: Kwikset Keyway Grade 3 Security 5 Pin 2-Way Latch Adjustable 2-3/8" or 2-3/4" Backset Fits Doors 1-3/8" to 1-3/4" Thick Radius Corner Latch and Strikes Fire Rated 3 Hours Reversable for Right and Left Hand Doors Specifications: Knob Length: 2.8125" Knob Height: 2.625" Deadbolt Length: 0.9375" Deadbolt Height: 2.5"

The Dynasty Colorado front door handleset will bring both beauty and functionality to your front door. Features include, Schlage C keyway, easy homeowner installation, adjustable backset fits either 2-3/8 or 2-3/4 inch. Beautiful Aged Oil Rubbed Bronze finish. Backed by a 10 year factory warranty. Fits either right or left hand door. Tahoe knob inside.

• Collection: Colorado
• Interior Design: Tahoe
• Function: Single Cylinder
• Door Handing: Reversible
• Backset: Adjustable 2-3/8" or 2-3/4"
• Latch Face Plate: 1" x 2-1/4" Square
• Strike Plate: 2-1/4" Full Lip Square Corner
• Keyway: Schlage C 5 Pin
• Door Thickness: 1-3/8" thru 1-3/4"
• Material: Zinc Alloy
• ANSI Grade: Grade 3
• Country Of Manufacturer: Philippines

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The precise lines of the Quadrato Entry Set provide a crisp display of modern simplicity. With meticulous corners and mathematical symmetry, this square entry set is a versatile choice. Add the Circolo brass knob, with its pure cylindrical shape, to impart a simple yet elegant finishing touch. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/4" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 5-1/8" Handle Projection: 1-5/8" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

Weslock R7600--H1SL20 Right Hand Carlow Single Cylinder Handleset Trim for Stonebriar or Wiltshire with Adjustable Backset and Round Corner Strikes Oil Rubbed Bronze Finish

• Item Class Desc: Right Hand Carlow Single Cylinder Handleset Trim for Stonebriar or Wiltshire
• Molten Bronze Series: Molten Bronze Series
• Backset: Adjustable Backset
• Strike: Round Corner Strikes
• Function: Single Cylinder Trim
• Design: Carlow Stonebriar / Wiltshire
• Handing: Right Hand
• Grade: Grade 2
• Cylindrical Door Locks
• Meets ANSI A 156.2 Grade II lock standards
• Removable knobs/levers prevents scratching during installation
• Panic proof privacy/keyed entry - one turn of interior knob/lever unlocks and opens door
• Push button locking in rosette
• Manufacturer Warranty: Limited Lifetime Mechanical Warranty, Limited 10 Year Finish Warranty

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The meticulous corners and mathematical symmetry of the Quadrato Entry Set provide a crisp display of modern simplicity. The linen texture recollects a fabric favored by travelers for over a century, as well as an artist’s canvas. Add the Circolo brass knob, with its pure cylindrical shape, to impart a simple yet elegant finishing touch. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/4" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 5-1/8" Handle Projection: 2-1/8" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The precise lines of the Quadrato Entry Set provide a crisp display of modern simplicity. With meticulous corners and mathematical symmetry, the hammered texture adds keen visual interest to this square set. The superior clarity and dimensional, prismatic effect of the Quadrato Crystal knob will add visual drama to any space. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/4" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 52-3/16" Handle Projection: 2-7/16" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

The Carre Tall Plate offers an effortless design that brings a touch of glamor without compromising versatility. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The meticulous corners and mathematical symmetry of the Quadrato Entry Set provide a crisp display of modern simplicity. The linen texture recollects a fabric favored by travelers for over a century, as well as an artist’s canvas. The superior clarity and dimensional, prismatic effect of the Quadrato Crystal knob will add visual drama to any space. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/4" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 5-1/4" Handle Projection: 1-7/16" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The precise lines of the Quadrato Entry Set provide a crisp display of modern simplicity. With meticulous corners and mathematical symmetry, this square set gains depth and subtle flair from its organic leather texture. Add the perfect geometrical notes of the Quadrato Brass knob and feel the heft of the shape while turning this knob. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/8" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 5" Handle Projection: 2-1/16" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The precise lines of the Quadrato Entry Set provide a crisp display of modern simplicity. With meticulous corners and mathematical symmetry, this square entry set is a versatile choice. Add the perfect geometrical notes of the Quadrato Brass knob and feel the heft of the shape while turning this knob. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/8" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 5-1/8" Handle Projection: 1-5/8" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

Viaggio hardware is made in Europe and hand-assembled in the US. Each piece is created from solid-forged brass, and then precision polished for the sleekest looks. All Viaggio Hardware comes standard with luxury concealed screw mechanism for a clean installation, leaving no visible fasteners. The precise lines of the Quadrato Entry Set provide a crisp display of modern simplicity. With meticulous corners and mathematical symmetry, this square set gains depth and subtle flair from its organic leather texture. Add the perfect geometrical notes of the Quadrato Brass knob and feel the heft of the shape while turning this knob. All Viaggio products are made with longevity and durability in mind so they can be enjoyed for generations to come. Combo Pack: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key in the deadbolt and can be locked and unlocked from the interior using the thumbturn. This entry set would be ideal for the front entry of a home. Features: Made from solid forged brass and precision polished for superior quality Features concealed screw mechanism (CSM) for clean, uncomplicated style Easy to install and works with modern pre-drilled doors 1 inch hardened steel bolt for security Schlage C keyway Manufactured in Europe, assembled in the USA Lifetime Mechanical Warranty Includes: Two (2) knob and plate assemblies – one (1) preassembled One (1) strikeplate One (1) faceplate One (1) latch One (1) plastic anti-rotation block One (1) CSM subplate One (1) CSM spindle One (1) brass bushing One (1) plastic bushing tool One (1) nylon washer One (1) hex wrench One (1) cylinder escutcheon One (1) thumb turn escutcheon One (1) cylinder One (1) 6.5mm Spin Ring One (1) DB strikeplate with One (1) DB faceplate One (1) DB latch Mounting hardware Specifications: Backset: 2-3/8" Cross Bore: 2-1/8" Edge Bore: 1" Door Thickness: 1-3/8" to 1-3/4" Handing: Right Handle Length: 5" Handle Projection: 2-1/16" Trim Width: 2-1/2" Trim Height: 2-1/2" Product Weight: 3 lbs Latch Faceplate: Square Corner

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The simple elegance of the Classic Deadbolt offers beauty and durability that will compliment a variety of architectural styles. Made of solid, forged brass for durability and beauty.

• Exterior and interior trim deadbolt, deadbolt latch and kit, screws to install and two keys.
• Solid forged brass for fine detail
• Complete set for one door (both sides) with 2-3/8" backset
• Perfect for restoration and easy to install on modern pre-drilled doors
• Hand assembled in USA
• 5-year warranty
• FUNCTION: SINGLE CYLINDER
• CATEGORY: Deadbolt
• ADA Rated: NO
• Door Handing (Right-Handed, Left-Handed, Non handed): Non-handed
• Projection (in.): Exterior: .72, Interior: 1.65
• Backset (in.): 2.375
• Cross Bore (in.): 2 1/8"
• Door-thickness: 1 3/4" - 2 1/4"
• Restock: 0.25
• Max Height: 2.625
• Max Width: 2.625
• Thumb Turn Diameter: 1.375
• Thumb Turn Projection: 1.65
• Trim Ring Diameter: 2.625
• Assembled Depth (With 1.75in door thickness) : 4.12
• Edge Bore Hole Diameter : 1
• Door Bore Hole Diameter: 2.125
• Strike Height: 2.25
• Strike Width: 1
• Deadbolt Throw Length: 1

Keyhole: Keyhole Alike

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.

Weslock R7604--H1SL20 Right Hand Carlow Interconnected Handleset Trim for Stonebriar or Wiltshire with Adjustable Backset and Round Corner Strikes Oil Rubbed Bronze Finish

• Item Class Desc: Right Hand Carlow Interconnected Handleset Trim for Stonebriar or Wiltshire
• Molten Bronze Series: Molten Bronze Series
• Backset: Adjustable Backset
• Strike: Round Corner Strikes
• Function: Interconnect Trim
• Design: Carlow Stonebriar / Wiltshire
• Handing: Right Hand
• Grade: Grade 2
• Cylindrical Door Locks
• Meets ANSI A 156.2 Grade II lock standards
• Removable knobs/levers prevents scratching during installation
• Panic proof privacy/keyed entry - one turn of interior knob/lever unlocks and opens door
• Push button locking in rosette
• Manufacturer Warranty: Limited Lifetime Mechanical Warranty, Limited 10 Year Finish Warranty

The clean, crisp lines of the Fifth Avenue Tall Plate enhance the look of your door with a timeless design that will suit any home decor. These tall plates are ideal for doors that are taller in height providing an aesthetically pleasing plate-to-door ratio. This tall plate is available with any Grandeur Hardware knob, lever and finish to help you mix and match your door hardware.

• Made of solid, forged brass for long lasting durability
• Ideal for doors that are 84 inches or higher, where a standard height plate would not look to scale
• Drilling template and mounting hardware included for easy installation
• Available in 6 designer finishes from Grandeur Hardware

If the hinges are located on the right side of the door, then you will need a right-hand door knob. This means the privacy pin will be located on the left side of the knob.