Windmill Modern Ceiling Fans with 50 to 60 Inch Blades

Built with a sleek, carefully crafted design, Chisel redefines dramatic style. Made of sturdy solid wood blades, Chisel is available in Matte Black This light requires , Watt Bulbs (Not Included) UL Certified.

Springer is a statement-making ceiling fan with a rustic flair. The 12-blade, 60" ceiling fan was inspired by the form and function of a windmill and is ideal for Farmhouse, Industrial and Transitional interior settings. A full function remote control with batteries is included along with a dual mount canopy that accommodates flat or sloped ceilings.
12-blade, 60" statement-making ceiling fan was inspired by the form and function of a windmill;Powerful and quiet DC Motor;Features Distressed Walnut finished blades;Springer ceiling fan with a rich Architectural Bronze finish and Distressed Walnut blades;Beautiful and expansive in design, the indoor ceiling fan ideal for use in great rooms, living rooms, bedrooms and bonus rooms;A full function six-speed remote with batteries and reverse direction control is included;Springer ceiling fan adds form and function by providing increased air circulation in rooms;Oversized, texture die cast hanger ball reduces noise and wobble vibrations;Ideal for Farmhouse, Industrial and Transitional interior settings;As a general rule of thumb, lighting experts suggest this fan is ideal in a room size that is larger than 400-square feet;Dual mount canopy that accommodates flat or sloped ceilings (sloped -22 degrees);Airflow: 6485 CFM Energy consumption: 32 watts (excluding lights) Airflow efficiency: 201 cfm/watt Fan on a downrod;A 1" x 8" downrod is included. Longer accessory downrods can be ordered separately;UL dry location listed;Limited Lifetime Warranty

• ILLUMINATION
• Bulb(s) Included?: No

• STYLE
• Finish: Architectural Bronze
• Collection: Ceiling Fans
• Wire/Cord Length(inches): 80
• Material: Steel
• Control Included?: Remote Control With Hand Held Transmitter
• Blade Finish: Distressed Walnut
• Blade Pitch: 22°
• Fan Speeds: 6 Speed, Remote Control Reverse
• Motor RPM: 32

• ADDITIONAL INFO
• Dry rated
• Safety Rating: cULus
• Voltage: 120 V
• Weight: 37.55 lbs.
• Warranty: Limited Lifetime

52``Ceiling Fan from Chisel collection in Graphite finish.. No bulbs included. Built with a sleek, carefully crafted design, Chisel redefines dramatic style. Made of sturdy solid wood blades, Chisel is available in Matte Black with Walnut blades, Matte White with Weathered Wood blades and Graphite with Driftwood blades. Chisel is DAMP rated, making it perfect for both interior and outdoor settings. No UL Availability at this time.

THE CATALINA COLLECTION:

• Boasting superb craftsmanship, the Catalina collection boldly fills a space with stunning rustic appeal. Designed with intuitive mechanics in mind, this fixture creates an arresting airborne illusion.
• A sloping hood meets an alternating-sloping ring along the center column. Before sloping further, slanted wooden blades shoot out from the ring to convey a farmhouse look and feel. From the blade ring hangs a tapered cage framework made up of two rings and supporting pillars that houses a clear hammered glass shade snouted at the base by artistically curved arms. A wavy diffusion results from the rushing contrasting blades.
• Available in Olde Bronze and Black Iron as 5-blade ceiling fans.

PRODUCT INFORMATION:

• MODEL NUMBER: BWP9181, UHP9181
• PRODUCT COLLECTION: Catalina
• INSTALL LOCATION: Indoor / Outdoor
• FIXTURE TYPE: Ceiling Fan
• FIXTURE FINISH: Black Iron
• BLADE FINISH: Toasted Oak
• FIXTURE MATERIAL: Steel
• BLADE MATERIAL: Acrylic
• AIR MOVEMENT: Non -Reversible
• FAN MOTOR: 3 Speed, Manual Reverse
• FAN CONTROLS: Wall Control

ABOUT THE DESIGN:

• DESIGN FEATURES: Light Kit Included

SHADE CHARACTERISTICS:

• FIXTURE FORM/SHAPES: Circular
• FINISH TONES: Iron

ELECTRICAL AND INSTALLATION:

• FIXTURE BODY: 19-1/2''H x 52"W x 52"D
• DOWNROD LENGTH: 4.5 in
• CEILING OR WALL PLATE DIMS: 2.5"x 6.5"x 6.5"
• FIXTURE WEIGHT (IN LBS): 20.94 lbs
• LOCATION RATING: Wet Locations
• SLOPED CEILING COMPATIBLE: Yes
• VOLTAGE: 110/120 V
• LIGHT KIT INCLUDED: Yes
• BULB TYPE: LED, Integrated LED, 17W (bulbs included)
• LIGHT KIT SHADE DESCRIPTION: Clear hammered Glass

STYLE INFLUENCES:

• MODERN FARMHOUSE: Blends classic farmhouse elements with modern design, featuring clean lines, neutral colors, and rustic finishes.
• TRANSITIONAL: Merges traditional and contemporary, balancing comfort and sophistication with a neutral palette.
• CRAFTSMAN: Emphasizes handcrafted woodwork, quality materials, and sturdy construction, often with a warm, earthy palette.
• FARMHOUSE: Rustic and homey, with a focus on simplicity, practicality, and warmth, often using reclaimed woods and vintage pieces.

PRODUCT TAGS:

quiet light kit lighting interior bedroom living room livingroom flush remote energy star exterior outside out door porch large blade small fixture patio home house entry front back side door yard moisture water led ceiling fane

THE CATALINA COLLECTION:

• Boasting superb craftsmanship, the Catalina collection boldly fills a space with stunning rustic appeal. Designed with intuitive mechanics in mind, this fixture creates an arresting airborne illusion.
• A sloping hood meets an alternating-sloping ring along the center column. Before sloping further, slanted wooden blades shoot out from the ring to convey a farmhouse look and feel. From the blade ring hangs a tapered cage framework made up of two rings and supporting pillars that houses a clear hammered glass shade snouted at the base by artistically curved arms. A wavy diffusion results from the rushing contrasting blades.
• Available in Olde Bronze and Black Iron as 5-blade ceiling fans.

PRODUCT INFORMATION:

• MODEL NUMBER: BWP9180, UHP9180
• PRODUCT COLLECTION: Catalina
• INSTALL LOCATION: Indoor / Outdoor
• FIXTURE TYPE: Ceiling Fan
• FIXTURE FINISH: Olde Bronze
• BLADE FINISH: Walnut
• FIXTURE MATERIAL: Steel
• BLADE MATERIAL: Acrylic
• AIR MOVEMENT: Non -Reversible
• FAN MOTOR: 3 Speed, Manual Reverse
• FAN CONTROLS: Wall Control

ABOUT THE DESIGN:

• DESIGN FEATURES: Light Kit Included

SHADE CHARACTERISTICS:

• FIXTURE FORM/SHAPES: Circular
• FINISH TONES: Bronze

ELECTRICAL AND INSTALLATION:

• FIXTURE BODY: 19-1/2''H x 52"W x 52"D
• DOWNROD LENGTH: 4.5 in
• CEILING OR WALL PLATE DIMS: 2.5"x 6.5"x 6.5"
• FIXTURE WEIGHT (IN LBS): 20.94 lbs
• LOCATION RATING: Wet Locations
• SLOPED CEILING COMPATIBLE: Yes
• VOLTAGE: 110/120 V
• LIGHT KIT INCLUDED: Yes
• BULB TYPE: LED, Integrated LED, 17W (bulbs included)
• LIGHT KIT SHADE DESCRIPTION: Clear hammered Glass

STYLE INFLUENCES:

• MODERN FARMHOUSE: Blends classic farmhouse elements with modern design, featuring clean lines, neutral colors, and rustic finishes.
• TRANSITIONAL: Merges traditional and contemporary, balancing comfort and sophistication with a neutral palette.
• CRAFTSMAN: Emphasizes handcrafted woodwork, quality materials, and sturdy construction, often with a warm, earthy palette.
• FARMHOUSE: Rustic and homey, with a focus on simplicity, practicality, and warmth, often using reclaimed woods and vintage pieces.

PRODUCT TAGS:

quiet light kit lighting interior bedroom living room livingroom flush remote energy star exterior outside out door porch large blade small fixture patio home house entry front back side door yard moisture water led ceiling fane

Wanted to get fresh air while having the breeze in hot weather? This 52" reversible LED ceiling fan brings you wind and breeze in summer and improves the air circulation in winter if you make it spin reversely. The cylindrical and straight lines pairing with the windmill-shaped blades complete it as a modern industrial ceiling fan. It comes with simple handy remote control for you to adjust among 6 different speeds.

Features:

• 6-speed motor delivers ultra-powerful air movement with quiet performance;
• Features reversible airflow function for summer/winter operation;
• Adjustable color temperatures from cool white (6000K) to warm white (3000K) to natural light (4000K);
• The timer function sets the fan to turn off automatically at 1/2/4 hours;

Wanted to get fresh air while having the breeze in hot weather? This 52" reversible LED ceiling fan brings you wind and breeze in summer and improves the air circulation in winter if you make it spin reversely. The cylindrical and straight lines pairing with the windmill-shaped blades complete it as a modern industrial ceiling fan. It comes with simple handy remote control for you to adjust among 6 different speeds.

Features:

• 6-speed motor delivers ultra-powerful air movement with quiet performance;
• Features reversible airflow function for summer/winter operation;
• Adjustable color temperatures from cool white (6000K) to warm white (3000K) to natural light (4000K);
• The timer function sets the fan to turn off automatically at 1/2/4 hours;

The 56" Schaffer four-blade ceiling fan blends a streamlined design with mixed metal elements and a wire mesh housing, suitable for modern and urban industrial spaces. The Architectural Bronze ceiling comes with brushed bronze accents. A remote control with batteries is included.

Ceiling Fan in the Oiled Bronze, reversible maple/dark walnut blades, 3 Lights Opal glass, 3*13W CFL's included

• ENERGY INFORMATION AT HIGH SPEED
• Airflow: 5206 Cubic Feet Per Minute
• Electricity Use: Watts (excludes lights)
• Airflow Efficiency: Cubic Feet Per Minute Per Watt

• ILLUMINATION
• Bulb Type: LED
• Socket Type: Medium
• # of bulbs: 3
• Max Wattage: 39
• Bulb(s) Included?: Yes
• Dimmable: No

• STYLE
• Finish: Oiled Bronze
• Collection: Dalton
• Downrod Included: Yes
• Shade: White Glass
• Glass: White
• Material: Metal
• Pull Chain Included?: Yes
• Light Kit Included: Yes(Removeable )
• Control Included?: No
• Blade Count: 5
• Blades Included: Yes
• Blade Pitch: 12°
• Blade Size(inches): 52
• Blade Materials: Plywood
• Fan Speeds: 3
• Motor Type: AC

• ADDITIONAL INFO
• Voltage: 120
• Weight: 17.49 lbs.

THE ROCKPORT COLLECTION:

• The Rockport collection highlights a sleek contemporary design with a creative edge. Bundling style with top-notch performance is the cornerstone of this design.
• From a canopy casing, a thin stem drops down until it bulges out into a bulky oval column. Entering the peaks of the oval column at a slanting angle are two alternating fan blades neatly disguised inside arched wireframes. The frames are further clothed in canvas to protect the blades from fading as a result of the elements. Beneath the frames, the oval column then retracts into a shade housing while a white opal glass diffuser pops at the bottom of the fixture.
• Available in Aged Nickel, Architectural Bronze, and Black Iron as ceiling fans.

PRODUCT INFORMATION:

• MODEL NUMBER: BWP9082, UHP9082
• PRODUCT COLLECTION: Rockport
• INSTALL LOCATION: Indoor / Outdoor
• FIXTURE TYPE: Ceiling Fan
• FIXTURE FINISH: Black Iron
• BLADE FINISH: Charcoal
• FIXTURE MATERIAL: Steel
• BLADE MATERIAL: Canvas
• AIR MOVEMENT: Non -Reversible
• FAN MOTOR: 3 Speed, Manual Reverse
• FAN CONTROLS: Hand Held Remote With Wall Holder

ABOUT THE DESIGN:

• DESIGN FEATURES: Light Kit Included, Unique Blades, Two Blade Design

SHADE CHARACTERISTICS:

• FIXTURE FORM/SHAPES: Circular
• FINISH TONES: Iron

ELECTRICAL AND INSTALLATION:

• FIXTURE BODY: 14-7/8''H x 54"W x 54"D
• DOWNROD LENGTH: 6 in
• CEILING OR WALL PLATE DIMS: 2.19"x 6.31"x 6.31"
• FIXTURE WEIGHT (IN LBS): 16.1 lbs
• LOCATION RATING: Damp Locations
• SLOPED CEILING COMPATIBLE: Yes
• VOLTAGE: 110/120 V
• LIGHT KIT INCLUDED: Yes
• BULB TYPE: LED, Integrated LED, 18W (bulbs included)
• LIGHT KIT SHADE DESCRIPTION: White Opal Glass

STYLE INFLUENCES:

• MODERN: Focuses on simplicity and functionality with clean lines and minimal ornamentation. Geometric, oversized shapes break up otherwise airy spaces.
• MINIMALIST: Emphasizes simplicity and functionality, with a focus on space, light, and form, often using monochromatic color schemes.
• MID CENTURY MODERN: Characterized by clean lines, organic forms, and minimal ornamentation, with a focus on functionality and simplicity from the mid-20th century.
• TRANSITIONAL: Merges traditional and contemporary, balancing comfort and sophistication with a neutral palette.

PRODUCT TAGS:

quiet light kit lighting interior bedroom living room livingroom flush remote energy star exterior outside out door porch large blade small fixture patio home house entry front back side door yard moisture water led ceiling fane

52 Inch The Rip Windmill Ceiling Fan -This finish has it ALL - grit, class, and loyalty, just like Rip Wheeler in Yellowstone. We have blended some of our most popular finishes and created this incredible finish. The blades are Patina Copper and Barn Metal with a touch of Rustic Black has that rustic, gritty look and feel. The motor and frame are Rustic Black, a classy and classic Rip look. All our fans offer aluminum and steel materials make it durable and loyal, just like Rip!

Our windmill fans are hand-crafted, American-made, and truly one of a kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements. Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3-speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family-owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more.
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light is available upon request additional fee
• Remote available upon request additional fee
• It can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides unique aluminum lightweight, 18-blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances, and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

THE MENDOCINO COLLECTION:

• The Mendocino collection introduces a welcoming country mood anywhere it is installed. Artistically crafted, the design embodies rustic appeal with a gorgeous edge without sacrificing function.
• The fixtures drop from an inverted drain plunger stem before flowing out into a canopy cap. The cap then supports a shape similar to a serving pot that anchors fan blades reminiscent of boat oars all around it. To maintain a straight aim, the oar handles are secured through parallel and perpendicular brackets. The four graciously spaced oars lead into a contrasting base compartment sheltering a white opal glass shade that conceals an LED light source for subtle illumination.
• Available in Architectural Bronze, Midnight Black, and Matte White as ceiling fans.

PRODUCT INFORMATION:

• MODEL NUMBER: BWP9012, UHP9012
• PRODUCT COLLECTION: Mendocino
• INSTALL LOCATION: Indoor / Outdoor
• FIXTURE TYPE: Ceiling Fan
• FIXTURE FINISH: Matte White
• BLADE FINISH: Distressed White
• FIXTURE MATERIAL: Steel
• BLADE MATERIAL: Acrylic
• AIR MOVEMENT: Non -Reversible
• FAN MOTOR: 6 Speed Remote reverse
• FAN CONTROLS: Hand Held Remote With Wall Holder

ABOUT THE DESIGN:

• DESIGN FEATURES: Light Kit Included, Unique Blades

SHADE CHARACTERISTICS:

• FIXTURE FORM/SHAPES: Circular
• FINISH TONES: White

ELECTRICAL AND INSTALLATION:

• FIXTURE BODY: 16-1/16''H x 56"W x 56"D
• DOWNROD LENGTH: 6 in
• CEILING OR WALL PLATE DIMS: 2.19"x 6.31"x 6.31"
• FIXTURE WEIGHT (IN LBS): 18.74 lbs
• LOCATION RATING: Damp Locations
• SLOPED CEILING COMPATIBLE: Yes
• VOLTAGE: 110/120 V
• LIGHT KIT INCLUDED: Yes
• BULB TYPE: LED, Integrated LED, 24W (bulbs included)
• LIGHT KIT SHADE DESCRIPTION: Opal Glass

STYLE INFLUENCES:

• URBAN LOFT: Features open spaces, high ceilings, and a mix of industrial and contemporary elements, often in a city environment.
• RUSTIC: Emphasizes rugged, natural beauty, often using raw and unfinished elements like wood and stone.
• MODERN FARMHOUSE: Blends classic farmhouse elements with modern design, featuring clean lines, neutral colors, and rustic finishes.
• MID CENTURY MODERN: Characterized by clean lines, organic forms, and minimal ornamentation, with a focus on functionality and simplicity from the mid-20th century.

PRODUCT TAGS:

quiet light kit lighting interior bedroom living room livingroom flush remote energy star exterior outside out door porch large blade small fixture patio home house entry front back side door yard moisture water led ceiling fane

THE ADELAIDE COLLECTION:

Creatively combining interesting metal with wood tones, the Adelaide collection goes beyond elegance. As a rustic display of splendor, the tenet of the collection is a neat faux-wood ring sequence that revolves around a lighting array.
The faux wood of this collection is creatively achieved, leveraging textured metal and hand-finishing techniques. As a non-porous material, this not only ensures longevity of the materials, but is also representative of modern forms which mimic woods. The hanging fixtures in this collection most often sport three of these wood-look circular bands neatly gapped and linked through perpendicularly bolted slats. The largest of the chandeliers use just one wood band, with bowing metal arms taking a more prominent focus. Bathroom fixtures feature the wood band beneath the glass and bulbs, as though the light emerges from nature. In all cases, when paired with vintage bulbs this collection easily advances a vintage allure.
As one of our largest collections, the Adelaide is available in Galvanized Steel and Charcoal as ceiling fixtures, pendants, bath fixtures, chandeliers, and ceiling fans.

PRODUCT INFORMATION:

• MODEL NUMBER: BWP9031, UHP9031
• PRODUCT COLLECTION: Adelaide
• INSTALL LOCATION: Indoor
• FIXTURE TYPE: Ceiling Fan
• FIXTURE FINISH: Charcoal
• BLADE FINISH: Graphite
• FIXTURE MATERIAL: Steel
• BLADE MATERIAL: Acrylic
• AIR MOVEMENT: Non -Reversible
• FAN MOTOR: 3 Speed, Manual Reverse
• FAN CONTROLS: Hand Held Remote With Wall Holder

ABOUT THE DESIGN:

• DESIGN FEATURES: Light Kit Included, Cage

SHADE CHARACTERISTICS:

• FIXTURE FORM/SHAPES: Circular
• FINISH TONES: Charcoal

ELECTRICAL AND INSTALLATION:

• FIXTURE BODY: 18-1/8''H x 23-1/2"W x 23-1/2"D
• DOWNROD LENGTH: 6 in
• CEILING OR WALL PLATE DIMS: 2.0625"x 7.3125"x 7.3125"
• FIXTURE WEIGHT (IN LBS): 24.8 lbs
• LOCATION RATING: Damp Locations
• SLOPED CEILING COMPATIBLE: Yes
• VOLTAGE: 110/120 V
• LIGHT KIT INCLUDED: Yes
• BULB TYPE: LED, E26 Medium Base, 5.5W (bulbs included)
• LIGHT KIT SHADE DESCRIPTION: N/A

STYLE INFLUENCES:

• MODERN FARMHOUSE: Blends classic farmhouse elements with modern design, featuring clean lines, neutral colors, and rustic finishes.
• MODERN: Focuses on simplicity and functionality with clean lines and minimal ornamentation. Geometric, oversized shapes break up otherwise airy spaces.
• MINIMALIST: Emphasizes simplicity and functionality, with a focus on space, light, and form, often using monochromatic color schemes.
• CONTEMPORARY: Focuses on the present moment, featuring clean lines, open spaces, and minimal ornamentation.

PRODUCT TAGS:

• Quiet light kit lighting interior bedroom living room livingroom flush remote energy star home house large blade small fixture led ceiling fane

THE PROVINCETOWN COLLECTION:

• The Provincetown collection showcases a whimsical blend of traditional inspiration and modern application. The fan design incorporates a modern-stained center column as elongated blades feature an organic wood stain to optimize the natural allure.
• From the stepped canopy ceiling plate, a sturdy straight stem drops down, then extends further down into an enlarged column head. As the column expands downward, it meets a cylindrical column. Along the central circumference of the column, slightly slanted blades emerge. Below the blades, the column begins to retreat and ends as a shade compartment. The window-partitioned compartment encases white opal glass sheltering an LED light source.
• Available in Matte White, Architectural Bronze, and Midnight Black as ceiling fans.

PRODUCT INFORMATION:

• MODEL NUMBER: BWP9002, UHP9002
• PRODUCT COLLECTION: Provincetown
• INSTALL LOCATION: Indoor / Outdoor
• FIXTURE TYPE: Ceiling Fan
• FIXTURE FINISH: Midnight Black
• BLADE FINISH: Toasted Oak
• FIXTURE MATERIAL: Steel
• BLADE MATERIAL: Plywood
• AIR MOVEMENT: Non -Reversible
• FAN MOTOR: 3 Speed, Manual Reverse
• FAN CONTROLS: Hand Held Remote With Wall Holder

ABOUT THE DESIGN:

• DESIGN FEATURES: Light Kit Included

SHADE CHARACTERISTICS:

• FIXTURE FORM/SHAPES: Circular
• FINISH TONES: Black

ELECTRICAL AND INSTALLATION:

• FIXTURE BODY: 15-5/8''H x 54"W x 54"D
• DOWNROD LENGTH: 6 in
• CEILING OR WALL PLATE DIMS: 2.19"x 6.31"x 6.31"
• FIXTURE WEIGHT (IN LBS): 20.94 lbs
• LOCATION RATING: Damp Locations
• SLOPED CEILING COMPATIBLE: Yes
• VOLTAGE: 110/120 V
• LIGHT KIT INCLUDED: Yes
• BULB TYPE: LED, Integrated LED, 24W (bulbs included)
• LIGHT KIT SHADE DESCRIPTION: White Opal Glass

STYLE INFLUENCES:

• MODERN: Focuses on simplicity and functionality with clean lines and minimal ornamentation. Geometric, oversized shapes break up otherwise airy spaces.
• MINIMALIST: Emphasizes simplicity and functionality, with a focus on space, light, and form, often using monochromatic color schemes.
• TRANSITIONAL: Merges traditional and contemporary, balancing comfort and sophistication with a neutral palette.
• CONTEMPORARY: Focuses on the present moment, featuring clean lines, open spaces, and minimal ornamentation.

PRODUCT TAGS:

quiet light kit lighting interior bedroom living room livingroom flush remote energy star exterior outside out door porch large blade small fixture patio home house entry front back side door yard moisture water led ceiling fane

52 Inch Windmill Ceiling Fan Galvanized Silver| The American Fan- Windmill ceiling fan for dining room, house warming, house renovation, horse barn, large room, living room, new home, office, outdoor spaces, vaulted ceiling, ranch house, farmhouse, cabin living, rustic decor, man cave, modern decor, Christmas, windmill ceiling fan

This finish will stay the same over time...It’s the actual raw aluminum and steel metal components. Authentic galvanized silver makes this unique ceiling fan the perfect addition to your indoor or outdoor space. This is a classic finish with a sleek shine from the aluminum blades.

Longevity is key - the finish won't change and the strength of the aluminum blades won’t change, sag or corrode.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

THE ROCKPORT COLLECTION:

• The Rockport collection highlights a sleek contemporary design with a creative edge. Bundling style with top-notch performance is the cornerstone of this design.
• From a canopy casing, a thin stem drops down until it bulges out into a bulky oval column. Entering the peaks of the oval column at a slanting angle are two alternating fan blades neatly disguised inside arched wireframes. The frames are further clothed in canvas to protect the blades from fading as a result of the elements. Beneath the frames, the oval column then retracts into a shade housing while a white opal glass diffuser pops at the bottom of the fixture.
• Available in Aged Nickel, Architectural Bronze, and Black Iron as ceiling fans.

PRODUCT INFORMATION:

• MODEL NUMBER: BWP9081, UHP9081
• PRODUCT COLLECTION: Rockport
• INSTALL LOCATION: Indoor / Outdoor
• FIXTURE TYPE: Ceiling Fan
• FIXTURE FINISH: Architectural Bronze
• BLADE FINISH: Mushroom
• FIXTURE MATERIAL: Steel
• BLADE MATERIAL: Canvas
• AIR MOVEMENT: Non -Reversible
• FAN MOTOR: 3 Speed, Manual Reverse
• FAN CONTROLS: Hand Held Remote With Wall Holder

ABOUT THE DESIGN:

• DESIGN FEATURES: Light Kit Included, Unique Blades, Two Blade Design

SHADE CHARACTERISTICS:

• FIXTURE FORM/SHAPES: Circular
• FINISH TONES: Bronze

ELECTRICAL AND INSTALLATION:

• FIXTURE BODY: 14-7/8''H x 54"W x 54"D
• DOWNROD LENGTH: 6 in
• CEILING OR WALL PLATE DIMS: 2.19"x 6.31"x 6.31"
• FIXTURE WEIGHT (IN LBS): 16.1 lbs
• LOCATION RATING: Damp Locations
• SLOPED CEILING COMPATIBLE: Yes
• VOLTAGE: 110/120 V
• LIGHT KIT INCLUDED: Yes
• BULB TYPE: LED, Integrated LED, 18W (bulbs included)
• LIGHT KIT SHADE DESCRIPTION: White Opal Glass

STYLE INFLUENCES:

• MODERN: Focuses on simplicity and functionality with clean lines and minimal ornamentation. Geometric, oversized shapes break up otherwise airy spaces.
• MINIMALIST: Emphasizes simplicity and functionality, with a focus on space, light, and form, often using monochromatic color schemes.
• MID CENTURY MODERN: Characterized by clean lines, organic forms, and minimal ornamentation, with a focus on functionality and simplicity from the mid-20th century.
• TRANSITIONAL: Merges traditional and contemporary, balancing comfort and sophistication with a neutral palette.

PRODUCT TAGS:

quiet light kit lighting interior bedroom living room livingroom flush remote energy star exterior outside out door porch large blade small fixture patio home house entry front back side door yard moisture water led ceiling fane

52 Inch Rustic Copper Windmill Ceiling Fan | The American Fan -Transform your living space with this custom Rustic Copper windmill ceiling fan. The finish looks like aged copper that hasn’t quite been there long enough to Patina. The entire fan can be Rustic Copper or just the blades. You choose. This finish looks really nice with an Oil Rubbed Bronze motor and frame. The aged, darker areas on the blades pair well with the Oil Rubbed Bronze.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current, and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

This Windmill 52" Outdoor Ceiling Fan from Quorum has a finish of Galvanized and fits in well with any Transitional style decor.

• ILLUMINATION
• Bulb(s) Included?: No

• STYLE
• Finish: Galvanized
• Collection: Windmill
• Material: Mixed
• Blade Count: 10
• Blade Finish: Weathered Oak , Weathered Oak
• Blade Pitch: 30°
• Motor RPM: 84, 74, 31
• Motor Size: DC-165Mmm

• ADDITIONAL INFO
• Dry rated
• Weight: 35.2 lbs.
• Warranty: Limited Lifetime

This Windmill 52" Outdoor Ceiling Fan from Quorum has a finish of Oiled Bronze and fits in well with any Transitional style decor.

• ILLUMINATION
• Bulb(s) Included?: No

• STYLE
• Finish: Oiled Bronze
• Collection: Windmill
• Material: Mixed
• Blade Count: 10
• Blade Finish: Weathered Oak , Weathered Oak
• Blade Pitch: 30°
• Motor RPM: 84, 74, 30
• Motor Size: DC-165Mmm

• ADDITIONAL INFO
• Damp rated
• Weight: 38.72 lbs.
• Warranty: Limited Lifetime

Vision Max 56" Rubbererized White Finish, Rubberized White Blades
Similar to the popular Clarity hugger ceiling fan series, the 56" Vision Max by Monte Carlo is sleek and modern, but comes with a downrod to bring the fan down into the room when ceiling space allows. It's offered in three finish combinations to suite virtually any decor requirement. The fan"s integrated 15W LED downlight has a light output of 1,100 lumens and a color temperature of 2,700K and a CRI of 80+. Damp-rated for indoor/outdoor use, the Vision Max also comes with a four-speed wall control with LED dimmer.

• ENERGY INFORMATION AT HIGH SPEED
• Airflow: 5459 Cubic Feet Per Minute
• Electricity Use: Watts (excludes lights)
• Airflow Efficiency: Cubic Feet Per Minute Per Watt

• ILLUMINATION
• Bulb Type: LED
• Socket Type: Integrated Array LED 15 Watt
• Max Wattage: 15
• Bulb(s) Included?: Yes

• STYLE
• Finish: Rubberized White
• Collection: Vision Max
• Canopy(inches): D: 5.25
• Wire/Cord Length(inches): 78
• Downrod Included: 1 -4.5"
• Shade: Frosted Acrylic"Acrylic
• Material: Mixed
• Control Included?: Yes
• Blade Count: 3
• Blade Finish: Rubberized White
• Blade Size(inches): 56

• ADDITIONAL INFO
• Damp rated
• Safety Rating: C-UL-US
• Voltage: 120
• Weight: 19.8 lbs.

This Windmill 52" Outdoor Ceiling Fan from Quorum has a finish of Oiled Bronze and fits in well with any Transitional style decor.

• ILLUMINATION
• Bulb(s) Included?: No

• STYLE
• Finish: Oiled Bronze
• Collection: Windmill
• Material: Mixed
• Blade Count: 10
• Blade Finish: Weathered Oak , Weathered Oak
• Blade Pitch: 30°
• Motor RPM: 84, 74, 31
• Motor Size: DC-165Mmm

• ADDITIONAL INFO
• Dry rated
• Weight: 35.86 lbs.
• Warranty: Limited Lifetime

52 Inch Cattleman Windmill Ceiling Fan | The American Fan-With inspirations from the Wild West, this fan is truly one of a kind. Ol' rusted steel and a solid iron look are perfect for any outdoor space or home. Its hand-painted, barn-metal blades with rustic iron tips, motor, and frame is a nod to the quaint yet classic history of the Old West.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Oil Rubbed Bronze Windmill Ceiling Fan | The Patriot- The look of the Oil Rubbed Bronze finish is designed to simulate aged bronze. This finish is very dark and varies from a deep chocolate brown and has copper undertones. A Windmill Ceiling Fan with an oil-rubbed bronze finish is perfect for rustic or modern living spaces. Oil Rubbed Bronze plumbing and light fixtures and door hardware are very popular and this finish is a great match.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements. Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

Brushed Metal Windmill Ceiling Fan | The Patriot Fan- You're sure to make a dynamic impression when you use Brushed Metal as part of your Windmill Ceiling Fan design. Brushed metal is one of the five most common metals used in designs today. This finish takes time and patience since it is hand-sanded. It has the look of new corrugated metal panels and even has an artistic look that fits in contemporary and modern spaces. Single Side included or both sides per request additional charge.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch Patina Copper Windmill Ceiling Fan | The American Fan- This sophisticated finish has a hammered look with gorgeous patina blue/green veins throughout. You choose the level of patina you want your custom fan to have. This finish makes a gorgeous statement in a room and pairs very nicely with deep grays and stained finishes.

Our windmill fans are hand-crafted, American-made, and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Weathered Texas Turquoise Windmill Ceiling Fan | The Patriot Fan-This beautiful mix of turquoise colors will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish has a ton of character and color and really makes a bold statement in any room.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch Heritage Windmill Ceiling Fan | The American - This fan is the quintessential nostalgic pasture windmill look. Tarnished, tin blades with red tips and a rustic, black motor.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Barn Metal Windmill Ceiling Fan | The Patriot Fan-Our most popular finish is Barn Metal. This finish looks and feels just like a rusty, old windmill. Each Windmill fan is handcrafted and unique but to make it one of kind is this hand-painted finish. You choose how much rust you want and where you want it. There are many variations with this finish. It also looks great with a Matte Black motor and frame.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch Matte Black Windmill Ceiling Fan | The American Fan - Matte Black is becoming the finish of choice especially when it comes to decor. Black is a classic design color that never goes out of style. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.
Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72”, 84” and 96” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

Matte Silver Windmill Ceiling Fan | The Patriot Fan - This Matte finish is a duller finish with less shine. If you want the unpolished look of a windmill in the pasture but not the tarnished look this is the finish for you. Matte is a description used to characterize finishes that lack the mirror and shine properties of gloss.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch Tarnished Tin Finish Windmill Ceiling Fan | The Patriot Fan-A hands-down highlight to any rustic, farmhouse or modern space, tarnished tin provides the look and feel of old corroded metal just like the old windmills you see in open pastures.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch Navajo Wool Windmill Ceiling Fan | The American- Weaved together effortlessly, this fan finish is a collection of white, cream, tan and blue hues. It evokes the warmth of rich woven fibers. The handcrafted texture on each blade has an intricately detailed gradience that can only come from the hands of a true artist. This fan finish is a new favorite and would enrich any room.

Our windmill ceiling fans are handcrafted, American-made, and indeed one kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72", 84" and 96" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family owned and operated
• Endless Custom Finishes can match fixtures, paints, lighting, and more.
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is handcrafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9" down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.

52 Inch Weathered Rust Grey Windmill Ceiling Fan | The Patriot Fan- Beautiful authentic rustic grey ceiling fan will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish looks great with a galvanized silver motor and frame but also looks amazing with Oil Rubbed Bronze - your choice.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned, and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling
• We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

52 Inch Weathered Barn Red Finish Windmill Ceiling Fan | The Patriot Fan-You're sure to make a bold impression when you use Barn Red as part of your Windmill Ceiling Fan design. Barn Red is sure to be a standout piece in any room! If you want the look and feel of old barn wood but the durability of metal this finish is for you.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

Weathered Texas Turquoise with Patina Bronze Tips Windmill Ceiling Fan | The Patriot Fan- This beautiful mix of turquoise colors will be a showstopper in any room. Each blade is hand-painted and weathered to look and feel like old barn wood. This finish has a ton of character and color and really makes a bold statement in any room. The Patina Bronze Tips adds elegance and character like no other ceiling fan on the market.

Our windmill fans are hand-crafted, American made and truly one of a kind. We are a Texas, family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum allowing for stress-free installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barns and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52”, 60”, 66”, 72” diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• 3 speed, reversible, quiet, gearless AC motor
• CFM rating from 3000-4500
• Free consultation and advice
• Accessory Kit includes everything needed for installation
• Family owned and operated
• Endless Custom Finishes – we can match fixtures, paints, lighting, and more
• Fan weight is approximately 40 to 50lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Remote available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested and balanced with your blades and down rod. We remove the blades for shipping (smaller fans blades can be remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70”x70”x20”).

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9” down rod (any size down rod can be requested), wall switch, ceiling canopy, ceiling mount, screws and wire nuts, and 3-speed, reversible motor.

60 Inch Brahman Tinge With Rustic Red Tips Windmill Ceiling Fan | The American- Forged from the strength of Brahman Cattle, bring life on the farm indoors with this exquisite fan design. The rich grey blades with swipes of grey and black tones match the hide of Brahman Cattle almost identically. The rusted red tips add a flare of nostalgia; you can practically feel the texture of a classic old red barn. This fan finish is a fast favorite and would add WOW to any room.

Our windmill ceiling fans are handcrafted, American-made, and indeed one kind. We are a Texas family-owned and operated business. Each fan is constructed of durable steel and lightweight aluminum, allowing for stress-free Installation and perfect for interior or exterior placements.

Our windmill ceiling fans work well in many settings - dining rooms, great rooms, bedrooms, barnes and barndominiums, new builds and renovations, offices, outdoor spaces, vaulted ceilings, ranch houses, farmhouses, cabin living, rustic decor, man caves, modern decor, businesses, restaurants and event spaces.

• Easy Installation - standard ceiling supports and electrical
• Each fan is unique and one of a kind
• Hand-crafted and American made
• Eighteen Blades for optimal balance (14 blades on the 46")
• Available in 46", 52", 60", 66", 72", 84" and 96" diameter sizing
• Efficient motor integration design
• None or minimal assembly required
• Constructed only of quality steel and aluminum. Absolutely no molded plastic and particle board!
• Variable Speed, Geared Motor (Constant gear noise)

Includes wall mount variable speed control box/converter, 115 Volt AC input converts to DC current and uses normal electrical wire to fan. Must be used with this motor. Dimensions 5” x 2¼” depth x 3 ¾”width.

• CFM rating from 3000-7000
• Free consultation and advice
• Accessory Kit includes everything needed for Installation
• Family owned and operated
• Endless Custom Finishes can match fixtures, paints, lighting, and more.
• Fan weight is approximately 50-65lbs depending on the size and finish
• Outdoor damp rated
• Up Light available upon request additional fee
• Can be used on a flat or sloped ceiling

We are the only Windmill Ceiling Fan Company that provides the unique aluminum lightweight, 18 blade design, and custom finishes.

Note: Our fans are not mass-produced. Each of our windmill ceiling fans is handcrafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.

Every fan is built, assembled, tested, and balanced with your blades and down rod. We remove the blades for shipping (smaller fan blades can remain attached upon request). We number each blade and number the frame so you will get the same balanced effect when reattached. Our fans are shipped all over the US and internationally in custom packaging (70" x70" x20").

Each fan is shipped with everything you need to hang and operate the fan, instructions, 9" down rod (any size down rod can be requested), c channel steel ceiling mount, and wall control box/converter.