• 3-Speed Turntable (33 1/3, 45 & 78 RPM)
• Fabric Covered Turntable
• Belt Driven
• Bluetooth Input
• Pitch Control
• Aux In
• RCA Out
• Headphone Jack
• Stereo Sound

Features:

• Built-in Digital Sound Processor
• Front-mounted power meter and back panel adjustable gain
• Volume control limiter protects the woofers
• Low-level and high-level pass-through input/outputs
• Class D technology combines the best qualities of both class A and B amp
• Low distortion with high efficiency
• Includes a variable high-cut filter that routes higher frequencies to main speakers
• Improves the overall sound quality of home theater surround sound systems
• Remote control included
• OSD Audio 's SMP500DSP Class D Subwoofer Amp is designed for use with higher wattage passive subwoofers such as in-wall subs that require external power. This is a highly efficient Class D subwoofer amp that serves up 1000W of power peak and 400W RMS @ 4 ohms for deep, crisp, clean low-frequency sound effects in dedicated home theater systems and media rooms. Compact but powerful, the SMP500DSP includes a built-in Digital Signal Processor, DSP for high performance at low clock frequencies and improves bass response of subs with a variable high-cut filter with a front panel control knob that routes higher frequencies to main speakers. Compatible with new and old-school source equipment includes both signal, low level and speaker, high level pass through input/outputs for greater flexibility. Loaded with high-end features at an affordable price, the SMP500DSP includes front-mounted power meter, auto power on/off and dual 110/220 voltage.
• You'll experience deep, rich and crisp bass while watching your favorite movies, especially action and adventure flicks. A big bang for the buck, features include a front-mounted power meter, back panel adjustable gain and volume control limiter to protect the woofers as well as low-level and high-level pass-through input/outputs to cover newer and old school sound systems. Combining the best qualities of both class A and B amp technologies, distortion is low while efficiency is high, and the SMP500DSP Mono Amp also includes a variable high cut filter that routes higher frequencies to main speakers. This allows subs to concentrate on the low-frequency sound effects for which they are designed and keeps low bass away from your surround speakers for much cleaner highs and midrange.

Specifications:

• Amplifier Type: Subwoofer
• Amplifier Class: Digital Class D, 93% Efficient
• Channels: 1
• Power Handling: 200W(RMS/ 500W(MAX Per Channel @ 8 Ohm
• Power Handling: 400W(RMS/ 1000W(MAX Per Channel @ 4 Ohm
• Adjustable Low Pass Crossover: 20Hz-250Hz/0.5 Hz Increments
• Selectable Crossover Slopes: 12, 18, 24, 30, 36 or 48 dB
• Impedance: 8 Ohm and 4 Ohm Stable
• Signal to Noise Ratio: 95 dB
• 12V Trigger Mode
• Inputs: Speaker, High Level/Signal, Low Level RCA
• Outputs: Speaker, High Level/Signal, low Level RCA
• Variable Crossover: 40Hz-160Hz
• Selectable Phase Points: 0 to 315�
• Mode Select: Sub/LFE, Bypass LPF
• Automatic Source Switching
• DSP, Digital Signal Processing: Yes
• DSP Memory Store: Select and Store up to 3 Memory Banks
• Rack Mountable: Yes, Mounts Included
• Remote Control: Yes
• Dimensions, L x H x D: 17.13" x 2.16" x 11"
• Weight: 8.4 lbs.
• Warranty: 2 Years
• Black

Features:

• Heavy-duty weather-resistant outdoor subwoofer for backyards, porches and patios
• IP66 rated and protected from dirt, dust and sprinklers
• Rated at an 300W to deliver powerful low frequency sound effects - Subwoofer Amplifier needed
• Down-firing port with 10" polypropylene cone woofer
• Antique bronze finish blends easily in the backyard lighting landscapes
• Withstand rain, snow and high temperatures

Specifications:

• Speaker Type: 10" Outdoor Subwoofer
• Woofer: 10" Polypropylene Cone with Rubber Surround
• Frequency Response: 50Hz - 300Hz
• Power Handling: 300 Watts
• Sensitivity: 86 dB
• Impedance: 4 Ohms
• 3FT Speaker Cable Included
• Sold As: Single
• Unit Dimensions: (L x H x D) 6.5" x 12" x 16.5"
• Weight: 15 lbs.
• Warranty: 2 Years
• *PLEASE NOTE: A subwoofer amplifier is need to power this subwoofer!*

• Audio amplifier unit with Bluetooth for wireless connectivity to any Bluetooth enabled device
• Covered under Kohler's 1 year limited warranty
• Designed for use with the DTV+ bathing systems
• Integrated port to connect to the K-99695 system control module
• Can be connected with up to 4 Kohler SoundTile speakers, or any 4 or 8 ohm speaker system
• Two 3.5 mm input jacks for non Bluetooth capable audio devices
• One 3.5 mm audio out jack
• Can be set on a shelf or installed in a wall mount configuration
• Height: 4-1/4"
• Width: 5-5/8"
• Projection (Depth): 3-3/16"

Specifications:

• Finish: N/A
• Depth: 3.188"
• Height: 4.25"
• Manufacturer Warranty: 1 Year Limited
• Mounting Hardware Included: Yes
• Voltage: 110
• Width: 5.625"

Features:

• Add a powered subwoofer to new or existing home theaters or media rooms without running cable to the subwoofer
• Includes a 5.8 GHz digital wireless transmitter and built-in dual diversity antennas for fast and reliable transmission
• Undetectable latency, 16ms for pin-point bass response on movie and music soundtracks
• Flexible placement allows you to locate a powered sub anywhere there is an electrical outlet
• Equipped with multi-channel selection to dial in the most reliable frequency
• Transmits a reliable signal up to 150 feet distance between transmitter and receiver, line of sight
• Compact profile keeps kit out of sight
• Includes transmitter, receiver, 5.9V DC adapter, mounting bracket and user guide
• OSD Audio 's NERO-WSA Wireless Subwoofer Transmitter and Receiver kit lets you add pristine sounding bass to home theaters and media rooms without having to run cable from your amp or receiver to the subwoofer itself. Subwoofers tend to be the most difficult speakers to place, but with the NERO-WSA, you 'll get full-range wireless connectivity with the less-crowded 5.8 GHz frequency and dual diversity antenna switch-off for 360-degrees of reception capability. NERO-WSA will not interfere with Wi-Fi or other wireless protocols, and our wireless subwoofer kit includes an upgraded chip set for reliability and instant transmission with undetectable latency so bass notes are synced with the music or movie soundtracks. Installation is simple. The NERO-WSA transmitter connects to your amp or receiver's subwoofer RCA output, then sends a wireless signal over to the kit 's receiver which is connected to your powered subwoofer's LFE/Mono input. When the transmitter and receiver are within 150 feet of each other, the low frequency sound is transmitted to the subwoofer via the 5.8 GHz broadcast frequency for the most reliable and steady signal.
• Why Choose a Wireless Sub?
• A subwoofer is a dedicated bass speaker designed to handle the low frequency effects in audio systems. The ".1" in a 2.1, 5.1 or higher surround sound system, the subwoofer plays a critical role in transforming ordinary sound into a spine-tingling experience, especially on action and adventure films. Because subwoofers handle such low frequencies, you 'll often feel the bass as much as you hear it.
• Where you place the subwoofer will depend on your room 's acoustics and your own personal taste but placement flexibility is key. Sometimes, the best sound is experienced when the subwoofer is located in a corner, away from the TV and receiver, but this means running cable in the wall, underneath the floor or along the base boards�not always an easy task. OSD Audio 's NERO-WSA bypasses this step so you can place your sub anywhere near a power outlet.
• How Far Is the Range of the NERO-WSA Wireless Subwoofer Kit?
• Our NERO-WSA has a line-of-site range of 150 ft., although each environment varies and metal objects and obstacles can affect transmission. The 5.8 GHz frequency works best at line of sight, but you can hide the subwoofer transmitter/receiver in another room or behind a sofa; however, transmission range may drop.

Specifications:

• 5.8 GHz operating frequency for reliable bass audio
• Upgraded chip set for reliability and a near-zero delay
• Up to 150 ft operation distance between transmitter and receiver, line of sight.
• Audio Output Level: 2V
• Latency: 16 ms
• Typical Range - Line of Sight: 150FT
• Audio frequency range: 18Hz - 22kHz
• Frequency Response: 18Hz-22KHz
• Audio Distortion: 80dB
• Kit Includes: Transmitter, Receiver, 2 DC Adapters, and mounting bracket
• Dimensions:, W x D x H 4.5" x 2.9" x 1.1"
• Warranty: 2 Years
• Black

Features:

• Mounting bracket is designed to mount either vertically or horizontally
• Available with 70V switch for commercial installations
• Gold-plated spring compression binding posts for optimum connectivity
• Sturdy ABS polymer frame
• Power-coated rust-resistant grille

Specifications:

• Speaker Type: 6.5" Indoor/ Outdoor Patio Speakers, 70V Optional
• Woofer: 6.5" Polypropylene
• Tweeter: 1" Silk Dome
• Frequency Response: 37Hz to 22kHz
• Power handling: 150W
• Sensitivity: 91 dB
• Impedance: 8 Ohms w/ Optional 70V Transformer Built-In
• 70V Selectable Taps: 4 Watts, 8 Watts, 16 Watts and 30 Watts
• Inputs: Gold-Plated Spring-Loaded Binding Posts
• Weather Resistant: All-Weather Versatility; IPX6 Rated
• Silicone-sealed Internal Cabinetry and Driver
• Powder-coated Rust-resistant Steel Grille
• 18dB per octave Electro-Acoustic Crossover Design
• Handles Temperature Fluctuations From -20F to 200F
• Install-friendly Mounting Brackets Included
• Unit Dimensions: (L x H x D) 7.6" x 12" x 8.6"
• Sold As: Pair
• Wireless: No
• Colors Available: Black or White
• Weight: 9 lbs. Each Speaker
• Warranty: 1 year
• Voted Best Outdoor Speaker of 2018 by Wirecutter*

• Built-in Bluetooth Receiver
• USB Playback
• TF Card Playback
• Hands Free Calling
• Rechargeable Lithium Ion Battery

Specifications:

• 8" Polypropylene Cone Woofer with Sealed Voice Coil
• 1" Coaxial Polyamide Dome
• 8 Ohm
• Frequency Response 35Hz - 20kHz
• 200 Watts
• 91dB
• H 12" x W 11 1/2" x D 14"
• 30 lbs
• Aerospace-grade, multi-layer composite cabinetry
• Sandstone Brown & Granite Grey
• Sold as a pair
• 1 year warranty

Features

• Controls the volume in the dedicated room/zone
• The Wall mounted volume controller works with almost any audio system
• Low distortion and ruler flat frequency response
• Three color choices, all installation materials included

Specifications

• Volume Control Type: 300W Impedance Matching Rotary Knob Style
• Power Handling: 300W Peak; 150W RMS Per Channel
• Frequency Response: 20Hz - 20kHz
• Total Attenuation: 52 dB (Max)
• Steps: 12 (Make Before Break)
• Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers
• *Can be Used as Non-Impedance Matching if Leaving Default on Jumper Setting at 1X
• Wiring Requirement: Up to 14 Gauge Wire
• Removable Input and Output "Quick Connect" Phoenix Connectors
• Fits in a Standard Single Gang Box - See LV1 for Mounting Bracket
• Unit Dimensions: (L x H x D) 1.62" x 2.5" x 2.5"
• What's Included: White, Ivory and Almond Plates, Inserts, Screws, and Knob
• Additional Colors Available: Black or Brown
• Warranty: 5 Years

Specifications:

• Speaker Type: 6.5" Angled LCR Dolby Atmos Ready Ceiling Speaker
• Woofer: 6.5" Polypropylene Cone with Rubber Surround, Fixed at a 15 Angle
• Tweeter: 1" Pivoting Silk Dome
• Frequency Response: 50Hz - 22kHz
• Power Handling: 150W
• Sensitivity: 92 dB
• Impedance: 8 Ohms
• Dolby Atmos - Ready for True 3D Surround Sound
• Can be Placed Within a Foot of the Wall
• Spray Paintable Snap-In Grille Included
• Inputs: Gold-plated 5-way Binding Posts
• Install-friendly Dog Ear Installation Brackets
• Diameter & Depth: 10.5" x 5"
• Cutout Diameter: 8.12"
• Sold As: Single
• Warranty: 10 Years

Features:

• A compact and powerful digital subwoofer amplifier for home theater applications
• Efficient Class D digital technology runs cool under demanding loads
• Rated at 500W peak power and 250W continuous RMS
• Includes front-panel variable low-pass filter for balanced and accurate bass
• Additional front panel controls include phase and volume
• Multiple input options for older and newer receivers and pre-amps
• Auto sensing feature turns off amp when signal is undetected
• Dual voltage switchable, 120V/230V
• 2-Year Warranty
• OSD Audio 's SMP300 is a Class D digital mono subwoofer that delivers up to 500W of peak power to beef up the bass in your home theater or audio sound system. Designed for use with passive subwoofers such as in-wall subs that require external power, the SMP300 provides continuous, stable power but measures only 3" high so it can fit inside any equipment rack or cabinet. Moderately priced with high-end features, this compact sub amp enhances the low frequency sound effects on music and movie soundtracks so you 'll experience highly accurate bass and a more intense surround sound experience. The SMP300 includes variable low pass filter control for balanced and seamless sound quality as well as variable phase control for additional fine tuning. Multiple connection options include LFE input, line-level and speaker-level inputs to cover newer and old school source equipment.
• Why Do You Need Subwoofer Amp?
• A powered subwoofer has its own internal amplifier. A passive subwoofer requires external power, and most in-wall subs are passive. After all, it 's not so easy to install a 100-pound powered subwoofer inside a wall. That 's where an amp like the SMP300 comes into play. This amp not only adds necessary power but routes LFE away from your surround speakers, which in turn gives you much cleaner highs and midrange. This subwoofer amp does much more than supply power. It also improves the overall sound quality of your entire surround sound system.
• Variable Low Pass Filter
• A front-panel variable low pass filter allows you to adjust the upper frequency limit of the subwoofer to control the overlap of the subwoofer 's upper frequencies and the main speakers ' lower frequencies. This results in bass that complements the sound from the main speakers rather than overpowers.
• Variable Phase Control
• The SMP300 also includes a front-panel variable phase control knob that operates over a range from 0 degrees to 180 degrees and allows you to match the arrival times of the sound waves from the subwoofer and the main speakers. This fine-tuning results in bass that is less muddy or thumpy but rather smooth and detailed. Many amp subwoofers in this price range include a variable phase switch that does not offer the same amount of audio precision.
• Includes Class D Amp Technology
• The SMP300 uses Class D digital amplifier technology that combines the best qualities of both Class A and B amp protocols into a highly efficient compact chassis that is ideal for budget-minded users who want a feature-rich digital sub amp that does not run hot or take up a lot of space.

Specifications:

• Amplifier Type: Subwoofer
• Amplifier Class: Digital Class D
• Channels: 1
• Power Handling: 150W(RMS/ 300W(MAX Per Channel @ 8 Ohm
• Power Handling: 250W(RMS/ 500W(MAX Per Channel @ 4 Ohm
• Frequency Response: 20Hz-160Hz +/-1 dB THD: 1%
• Variable Crossover: 35Hz-180Hz
• Variable Phase Switch: 0 to 180 Degrees
• Impedance: 8 Ohm and 4 Ohm Stable
• Signal to Noise Ratio: 95 dB
• 12V Trigger Mode
• Inputs: Speaker, High Level/Signal, Low Level RCA
• Rack Mountable: 1U Rack Space Style/Mounts Included
• Dimensions, L x H x D: 16.25" x 3" x 9.25"
• Weight: 9 lbs.
• Warranty: 2 Years
• Black

Features:

• A compact but powerful 200-Watt Class D subwoofer amplifier to power passive subwoofers used in home theater applications
• Highly efficient Class D technology runs cool under demanding loads
• Adjustable low-pass filter for distortion-free bass
• Front-panel phase, crossover and volume controls
• Choice of speaker level or audio line level inputs, RCA
• Auto sensing feature automatically turns on or off when signal is detected or undetected
• Distributed power capability for speakers and subs
• Two-year warranty
• Our SMP200 Class D Digital Subwoofer Amplifier may be compact, but with 200W of power, this little amp packs a powerful punch. Designed to power passive subwoofers used in home theaters or whole house audio systems, the SMP200 measures less than nine inches wide and 10 inches deep but supplies an in-wall or stand-alone subwoofer with the power it needs so you can experience that gut wrenching, heart pounding low frequency impact, bass on movie and music soundtracks. The advanced crossover circuit can be set at different frequency ranges, 35Hz to 160Hz and can be adjusted with the front-panel control knob. Other features include front-panel adjustable phase and volume controls to dial in just the right amount of low frequency effects, LFE.
• Includes Class D Amp Technology
• The SMP200 uses Class D digital amplifier technology that combines the best qualities of both Class A and B amp protocols into a highly efficient compact chassis that is ideal for budget-minded users who want a feature-rich digital sub amp that does not run hot or take up a lot of space.
• Auto On/Off Switch
• The SMP200 includes auto sensing that turns on the amp when an audio signal is detected then turns off automatically after 15 minutes when a signal is not detected so no more worrying about whether you hit the off switch before bedtime.
• Master Volume Control
• When properly setup, the volume control on the SMP200 will control both the amp and the receiver volume to which it is connected for simple operation.
• Includes Speaker Level and RCA Inputs
• With both RCA and speaker level connections, the SMP200 acts as a distributed amplifier and will also power a pair of in-ceiling speakers in addition to a 6" or 8" subwoofer.
• Why Add A Subwoofer Amp?
• A powered subwoofer has its own internal amplifier, but a passive subwoofer will require a separate amplifier and in-wall subs are most commonly passive. The SMP200 Class D Digital Subwoofer Amp not only adds necessary power but also filters low frequencies away from other speakers, which in turn gives you much cleaner highs and midrange frequencies. Add this little subwoofer amp and you 'll improve the overall sound quality of your entire surround sound or whole house audio system.

Specifications:

• Amplifier Type: Subwoofer
• Amplifier Class: Digital Class D
• Channels: 1
• Power Output: 200 Watts
• Power Handling: 8 Ohm RMS Rating, Watts: 60 Watts
• Power Handling: 4 Ohm RMS Rating, Watts: 100 Watts
• Frequency Response: 20Hz-160Hz +/-1dB THD: 1%
• Variable Crossover: 35Hz-160Hz
• Variable Phase Switch: 0 to 180 Degrees
• Impedance: 8 Ohm and 4 Ohm Stable
• Signal to Noise Ratio: 95dB
• 12V Trigger Mode
• Inputs: Speaker, High Level/Signal, Low Level RCA
• Rack Mountable? 1U Rack Space Style/Mounts Included
• Dimensions, L x H x D: 8.5" x 1.75" x 9.8"
• Weight: 6.7 Lbs
• Warranty: 2 Years
• Black

Features:

• A compact 100-Watt Class D subwoofer amplifier for multiple source applications
• Ideal for powering subwoofers used in whole-house audio or dedicated home theaters
• Highly efficient Class D technology runs cool under demanding loads
• Adjustable low-pass filter for distortion-free bass
• Front panel phase and volume controls
• Choice of speaker level or audio line level inputs, RCA
• Auto sensing feature automatically turns on or off when signal is detected
• Distributed power capability for speakers and subs
• Two-year warranty
• The SMP100 Class D digital subwoofer amplifier is a compact 100W amp designed to power passive subwoofers used in home theaters or whole house audio systems. We call this our "tiny but mighty" powered sub because it measures less than six inches wide but supplies an in-wall or stand-alone subwoofer the power it needs so you can experience room-shaking low frequency impact, bass on movie and music soundtracks. The advanced crossover circuit can be set at different frequency ranges, 35Hz to 160Hz and can be adjusted with the front-panel control knob. Other features include front-panel adjustable phase and volume controls to dial in just the right amount of low frequency effects, LFE.
• Includes Class D Amp Technology
• The SMP100 uses Class D digital amplifier technology that combines the best qualities of both Class A and B amp protocols into a highly efficient compact chassis that is ideal for budget-minded users who want a feature-rich digital sub amp that does not run hot or take up a lot of space.
• Auto On/Off Switch
• The SMP100 includes auto sensing that turns on the amp when an audio signal is detected then turns off automatically after 15 minutes when a signal is not detected so no more worrying about whether you hit the off switch before bedtime.
• Master Volume Control
• When properly setup, the volume control on the SMP100 will control both the amp and the receiver volume to which it is connected for simple operation.
• Includes Speaker Level and RCA Inputs
• With both RCA and speaker level connections, the SMP100 acts as a distributed amplifier and will also power a pair of in-ceiling speakers.
• Why Add A Subwoofer Amp?
• A powered subwoofer has its own internal amplifier, but a passive subwoofer will require a separate amplifier and in-wall subs are most commonly passive. The SMP100 Class D Digital Subwoofer Amp not only adds necessary power but also filters low frequencies away from other speakers, which in turn gives you much cleaner highs and midrange frequencies. Add this little subwoofer amp and you 'll improve the overall sound quality of your entire surround sound or whole house audio system.

Specifications:

• Amplifier Type: Subwoofer
• Amplifier Class: Digital Class D
• Channels: 1
• Power Handling: 80W(RMS/ 160W(MAX Per Channel @ 8 Ohm
• Power Handling: 100W(RMS/ 200W(MAX Per Channel @ 4 Ohm
• Frequency Response: 20Hz-160Hz +/-1 dB
• Variable Crossover: 35Hz-160Hz
• Variable Phase Switch: 0 to 180 Degrees
• Impedance: 8 Ohm and 4 Ohm Stable
• Signal to Noise Ratio: 95 dB
• Inputs: Speaker, High Level/Signal, Low Level RCA
• Rack Mountable: No
• Dimensions, L x H x D: 5.7" x 2" x 6.1"
• Weight: 1.75 lbs.
• Warranty: 2 Years
• Black

• 500'
• 18/2
• Clear Speaker Wire
• 99.97% Oxygen Free Conductors
• PVC Jacket

• Power limited circuit and communication cable
• Security systems
• Communications
• Intercom/PA systems
• Sound/Audio

• UL Type CL3
• NEC Article 725
• As noted California State Fire Marshall.

Features

• Hide in plain site—friends won’t know where the sound is coming from!
• Built to last—bring on the heat, the rain, the cold, these speakers can take it
• Quality components ensure rich clear sound with no distortion
• Different colors to match your match your landscape!

Specifications:

• All-weather versatility
• Rigid, acoustically inert enclosure
• Aerospace-grade, multi-layer composite cabinetry
• 3-foot speaker cable included
• Woofer: 6.5-inch polypropylene cone with sealed voice coil and silicone encased leads
• Tweeter: 1-inch polyamide dome with silicone encased leads, coaxial mounted
• Power handling: 150 watts
• Frequency response: 35Hz to 20kHz
• Impedance: 8 ohms
• Sensitivity: 90dB
• Dimensions: 9.5 inches high, 11 inches wide and 13 inches long
• Unit: Pair
• 1-year warranty

Specifications:

• Speaker Type: 5.25" 2-Way Bluetooth Rock Speakers
• Woofer: 5.25" Polypropylene Cone with Butyl Rubber Surround
• Tweeter: 2" Dual Cone
• Frequency Response: 38Hz-20kHz
• Power Handling: 120W
• Impedance: 8 Ohms
• Bluetooth Range: Up to 100 ft w/ Unobstructed Line of Sight; 50 ft to 75 ft When Obstructed
• Bluetooth Version: 3.0
• Compatible with A2DP standard
• Rigid Exterior Cases with Water-resistant Features
• Designed to Look Like Rocks with Flat Bottoms, Makes it Easy to Place on any Flat Surface
• What's Included? IP67 Waterproof Power Adapter, Speaker Wire, and Waterproof Wire Connectors
• Power Supply Length: Plug to Transformer - 3' 5", Transformer to Speaker - 15' 5"
• Unit Dimensions: (L x H x D) 9" x 9.1" x 5.9"
• Sold As: Pair
• Colors Available: Sandstone Canyon Brown or Slate Dark Gray
• Weight: 15 lbs.
• Warranty: 1 Year

• With this kit you'll get all the accessories needed to set your speakers up outdoors. The following accessories are included:
• (2) Stake
• (2) Metal plate
• (2) Mounting Bracket
• (2) Full cap
• (8) Screws
• Hanging Mount Accessories Included with the pendant speakers are:
• Top Cover (2)
• Carabiner & Nut (2)
• 3.5 FT Hanging Cable (2)
• Hook (4)
• Screws (4)
• These outdoor landscape/ mounting accessories are included:
• (2) Stake
• (2) Metal plate
• (2) Mounting Bracket
• (2) Full cap
• (8) Screws

Specifications:

• Speaker Type: 5.25" Weather Resistant Hanging Pendant Speaker (70V/8 Ohm)
• Woofer: 5.25" Polypropylene Cone with Rubber Surround
• Tweeter: 1" Silk Dome
• Frequency Response: 110Hz-20kHz
• Max Power: 60 Watts
• Sensitivity: 84 dB
• Impedance: 8 Ohms/ 70V
• Dispersion Angle: 120�
• Wattage Taps: 30 Watts, 15 Watts, 7.5 Watts, 3.75 Watts
• IP66 Rated, Dust Proof and Water Resistant
• Powder-coated Rust-resistant Grille
• Inputs: Phoenix Connectors
• Unit Dimensions: (H X W) 9.4" x 6.7"
• Sold As: Pair
• Weight: 15 lbs.
• Warranty: 1 Year

Highlights:

• Top load CD player
• Plays CD/CD-R/RW
• AM/FM radio with white LCD display digital read-out
• 3.5mm Aux-in jack for other audio players
• AC Power: built-in AC power cable
• Telescopic FM antenna
• DC power uses 6 "C" batteries (not included)
• Boxed

• Comfortable and sturdy with retractable headband.
• Powerful 40mm wide-band bass enhanced speakers.
• Noise canceling microphone.
• 3.5 mm and 2.5 mm jack headset.

• Color: Black
• Connecting Types: 3.5 mm
• Earpiece Material: Leatherette
• Earpiece Type: Ear Cushion
• Global Product Type: Headsets-Monaural
• Headset Features: Digital Stereo Sound
• Headset Style: Over The Head
• Headset Type: Monaural
• Microphone: Noise Canceling
• Model Name/Number: ZuM ZuM350M

Features:

• Rust-resistant aluminum grille and composite cabinet
• Handles temperature fluctuations from 20F to 200F
• A great outdoor speaker for desks and hot tub areas

Specifications:

• Speaker Type: 4" 3-Way Indoor/ Outdoor Patio Speakers
• Woofer: 4" Polypropylene
• Tweeter: 0.5" PEI dome
• Frequency Response: 59Hz to 22kHz
• Power Handling: 110W
• Sensitivity: 90 dB
• Impedance: 8 Ohms
• Inputs: Gold-Plated Spring-Loaded Binding Posts
• Weather Resistant: All-Weather Versatility
• Powder-coated Rust-resistant Aluminum Grille and Composite Cabinet
• Handles Temperature Fluctuations From -20F to 200F
• Install-friendly Mounting Brackets Included
• Unit Dimensions: (L x H x D) 4.25" x 7.75" x 5.25"
• Sold As: Pair
• Wireless: No
• Colors Available: Black or White
• Weight: 4.5 lbs. Each Speaker
• Warranty: 1 year