- All Products
- Bath
- Tile
- Thickness: Thin
Thin Glazed and Polished Round Tile
- Color: Statuary White Marble (bright, semi-translucent white background color with a distinctive and dramatic veining);
- Size: 1 inch (diagonal - from point to point) hexagon pieces mounted on 12 x 12 (1 sq. ft.) sturdy mesh tile sheet;
- 14 rows and 12 columns with 168 stones per sheet;
- 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
Size:
- 1 inch (diagonal - from point to point) hexagon pieces mounted on 12 x 10 (0.83 sq. ft.) sturdy mesh tile sheet
- 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- 10.5 square feet, 10 pieces per case. Case weight is 18.3 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.88 in. width x 12.63 in. length x 0.21 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and moderate variation in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- Please note: Samples are not returnable
- Country of Origin: Indonesia
- 0.93 square foot per piece, each piece sold individually. Piece weight equals 0.9 lbs.
- Grade 1, first-quality natural shell tile for wall use
- 11.25 in. width x 11.63 in. length x 0.08 in. thick mesh-mounted mosaic
- Unglazed, smooth finish with a high sheen and moderate variation in tone
- PEI Rating 0 is suitable for wall use only
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- DCOF value is not available for this product. Please reference the PEI and MOHS rating for installation.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- Please note: Samples are not returnable
- Imported
- 10.5 square feet, 10 pieces per case. Case weight is 18.02 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 11.88 in. width x 12.63 in. length x 0.21 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile is not ADA approved for slip resistance with a DCOF value less than 0.42.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- Please note: Samples are not returnable
- Country of Origin: Indonesia
- 8.0 square feet, 10 pieces per case. Case weight is 14.8 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 9.75 in. width x 11.5 in. length x 0.21 in. thick mesh-mounted mosaic
- Glazed, slightly textured finish with a low sheen and uniform appearance in tone
- PEI Rating II is suitable for all interior walls and light foot traffic such as powder rooms
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating less than or equal to 0.50 and is considered to have a marginally low skid resistance. This tile is not ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- Please note: Samples are not returnable
- Country of Origin: Thailand
- Thassos White Polished Marble Penny Round Mosaic Tile
- Design Type: Penny Round Mosaic
- Type: Honed Finish
- Design: Mosaic Tiles
- Color: White
- Material Type:Marble
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.375
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_671
- Product Code: Fancy_group_671
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_4119
- Thassos White Polished Marble Bubbles Mosaic Tile
- Design Type: Multiple Sizes
- Type: Polished Finish
- Design: Mosaic Tiles
- Color: White
- Material Type:Marble
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.375
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_1957
- Product Code: Fancy_group_1957
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_5405
- Size: 1 inch (diagonal - from point to point) hexagon pieces mounted on 12 x 10 (0.76 sq. ft.) sturdy mesh tile sheet;
- 12 rows and 12 columns with 144 stones per sheet;
- 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- Carrara White Marble 1" (from point to point) hexagon pieces mounted on 12x12" mesh tile sheet
- 12 rows and 14 columns with 168 stones on each sheet; 5/16" thickness; Polished (Glossy) finish
- First Quality; Natural Beauty; Carefully Selected; Consistent in size and finish; Factory Direct
- Matching subway tiles, basketweaves, herringbone, brick tiles, borders, moldings and more
- Price per sheet (1 sq.ft.); FREE SHIPPING; Large quantities in stock - info@stonecenteronline
- CIRCULAR GLASS TILE SERIES - OCEAN SKY
- Glass mosaic made of varying sizes of circles in multiple shades of blue.
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Blue, Light blue and White
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- CIRCULAR GLASS TILE SERIES - FOREST
- Glass mosaic made of Blue and Brown in varying sizes of circles
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Blue, Brown and Grey/Green
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
Product Attributes
Item:
- Premium (SELECT) Quality Greek Thassos White Marble
- POLISHED PENNY ROUND MOSAIC TILE W / BLUE GRAY DOTS (ON-MESH)
Dimensions (per piece):
- 3/4" (Diameter) X 3/8" (Thickness)
Material:
- Premium Greek Thassos White Marble
Coverage:
- 1 sheet = 0.94 sq. ft. (Sheet Size: 11 3/16" (W) X 12 1/16" (L))
Application Area(s):
- Commercial and Residential (Interior & Exterior), Shower, Backsplash, Countertop, Deck & Patio, Decorative, Floor, Wall
Minimum Purchase:
- 10 sq. ft.
Surface Finish:
- Polished (Flawless, smooth satin finish)
Edge Finish:
- Straight cut/Rectified
- Sample
- SAMPLE SIZE = 6'' X 6''
- FREE SHIPPING APPLIES TO ALL ORDERS
- 1 SAMPLE ALLOWED PER HOUSEHOLD / ADDRESS
- MULTIPLE SAMPLES CAN ONLY BE PURCHASED BY DIRECTLY CONTACTING US
- Available Quantity
- All items are normally in stock in large quantities.
- Shipping is available within the 48 continental US States.
- SHIPPING IS FREE ON ALL ORDERS OF THIS ITEM, UNLESS STATED OTHERWISE.
- Special arrangements may be made for international buyers.
- For large orders and all other shipping related inquiries, please contact our shipping department.
- Ship / Lead Time
- All items are in stock. Normally ships within 1-2 Business days
- Item Location
- Southern California (Anaheim, CA)
- Local Pickup
- Available with appointment.
- Material Origin
- GREECE
- Manufacturer / Importer
- OTS
- Please keep in mind that each piece of natural stone has unique features that vary it from the others in terms of color, texture and homogeneity. Expect to have some variation between individual pieces when ordering in large quantities.
- Installation of the product requires sealing products and these need to be purchased seperately. (Only the item described in the listing will be shipped out).
- Sheet size: 12-1/4 in. x 11-1/2 in. x 6mm
- Coverage: 0.98 sqt per sheet, 10 sheets per box
- Usage: Kitchen and bath backsplash, wall tile, floor tile
- Size: 9.72 x 11.3 inch;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- Sheet size: 12-1/4 in. x 11-1/2 in. x 6mm
- Coverage: 0.98sqf per sheet, 10 sheets per box
- Usage: Kitchen and bath backsplash, wall tile, floor tile
- 8.3 square feet, 10 pieces per case. Case weight is 13.65 lbs.
- Grade 1, first-quality porcelain tile for floor and wall use
- 10.75 in. width x 10.88 in. length x 0.25 in. thick mesh-mounted mosaic
- Glazed, smooth finish with a high sheen and uniform appearance in tone
- PEI Rating IV has high resistance to abrasion and is suitable for heavy-duty residential and commercial kitchens, hotels, exhibition and sales rooms with some dirt conditions
- Impervious tiles have a water absorption of less than 0.5% for indoor and outdoor use and are frost resistant
- This tile has a COF wet rating greater than 0.60 to 0.79 which is considered skid resistant for indoor and outdoor use. This tile is ADA approved for slip resistance.
- Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength
- Please note: Samples are not returnable
- Country of Origin: Indonesia
Design Type:
- Design Type: Polished Finish
Design:
- Color: Carrara White
- Material Type:Marble
- We sell by: Sheet
- Width: 12 Height: 12 Thickness:0.38
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_1260
- Product Code: Fancy_group_1260
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_4708
- The price is for 1 piece (1 square foot).
- One piece is one square foot
- 3/4" x 3/4" carrara white penny round mosaic polished marble tile
- This material is for bathroom, kitchen, shower, backsplash floor & wall
- Color: carrara white
- Country of origin: italy
- Milano Oompa Carrara Glass and Stone Mosaic
- Oompa Carrara - Pure White Glass & White Carrara Marble in Multi-Size Round Shape.
- Type: Glass and Stone Mosaic
- Square-Feet Per Sheet: 0.9587 sqft
- Size of Unit: 11.75 x 11.75
- Width: 11.75 Depth: 11.75 Thickness: 3/8 inch
- Sold By: Sheet
- Oriental White Polished Marble Penny Round Mosaic Tile (Oriental White + Thassos + Blue)
- Design Type: Oriental White
- Type: Polished Finish
- Design: Mosaic Tiles
- Color: White
- Material Type:Marble
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.375
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_584
- Product Code: Fancy_group_584
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_4032
- Calacatta Gold Polished Marble Penny Round Mosaic Tile
- Design Type: Mosaic Tiles
- Type: Polished Finish
- Design: Mosaic Tiles
- Color: White
- Material Type:Marble
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.375
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_497
- Product Code: Fancy_group_497
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_3945
- Thassos White Polished Marble Penny Round Mosaic Tile (Thassos + Carrara + Black)
- Design Type: Penny Round Mosaic
- Type: Polished Finish
- Design: Mosaic Tiles
- Color: White
- Material Type:Marble
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.375
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_674
- Product Code: Fancy_group_674
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_4122
- MARBLE PEBBLES MOSAICS HEART SHAPE - AMBER
- Light and Dark Emperador mixed with Marfil marble in heart shape mosaic
- Material: Marble
- Sheet Size: 12" x 12"
- Thickness: 3/8"
- Colors: Amber
- Finish: Polished finish
Can install the residential shower when sealed.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
Maintenance & Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Sheet size: 12-1/4 in. x 11-1/2 in. x 6mm
- Coverage: 0.98 sqt per sheet, 10 sheets per box
- Usage: Kitchen and bath backsplash, wall tile, floor tile
- CIRCULAR GLASS TILE SERIES - MINT
- Mint green glass in varying sizes of circles.
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: Mint
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Porcelain Mosaic Growing Gray, 12 x 12 Roman
- Roman Series- Growing Gray 11.5x11.5
- Type: Porcelain Mosaic
- Square-Feet Per Sheet: 0.9184 sqft
- Size of Unit: 11.5x11.5
- Width: 12 Depth: 12 Thickness: 3/8 inch
- Sold By: Sheet
- ELFancy_Design_sub_1304-10-
- CIRCULAR GLASS TILE SERIES - SNOW
- Glass mosaic made of varying sizes of circles in Glossy White glass
*** Price per Sheet ***
- Material: Glass
- Sheet Size: 10 3/4"x10 3/4"
- Sq Ft Per Piece: 0.80
- Thickness: 1/3 in (8.00 mm)
- Colors: White
- Finish: Polished
- Interior Dry Walls, Shower Walls, Shower Floors, Pools, Pool Liners
- Installation Guide
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
Setting Materials and Methods:
Setting material requirements will vary dependent upon the type of mosaic product being installed and the nature of the substrate.- Advice on the appropriate setting materials should be sought from your tile and stone dealer at the time of purchase.
- Only use setting materials that meet or exceed TCNA guidelines
- Only use an accredited licensed contractor experienced in the art of installing mosaic products.
- Setting methods must conform to the TCNA guidelines.
- Do not cover/protect the Victoria Metals with adhesive tape of any kind.
Note: Grout Selection:
The use of sanded and some premixed urethane micro glass bead enhanced grouts may cause damage to scratch sensitive surfaces. Always check with your Stone and Tile Dealer, Setting Contractor or Grout Manufacturer before selecting the grout type. Maniscalco is not responsible for any damage to the tile surface due to incorrect grout selection or incorrect grouting procedures.Sealing Guide:
- Sealing prior to grouting is recommended for all stone mosaics.
- Glass (see note below), Stainless Steel, Antique Copper and Aluminum mosaics do not require sealing.
- Note: Pre sealing prior to setting is necessary when installing Barossa Valley Crystal Glass.
- Note: Only use water based sealers with Sydney Harbor Metals.
- Note: When sealing Botany Bay pebbles expect some darkening of the color. Test sealer on a sample area first.
- Tile Maintenance and More
- Color: Carrara White Marble (white gray field background with a light gray veining and the patterning is usually soft and feathery)
- Nero Marquina Marble (black background with fine and compact grain and white veins)
- Size: 12.99 x 9.37 inch;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
Beautiful Carrara White Marble in heart shape Mosaic
Price per Sheet (1 sq ft)
- Material: Marble
- Piece Size: 12" x 12"
- Individual Size: 1/2", 1 1/4 and 2 1/4
- Sq Ft Per Piece: 1
- Thickness: 3/8"
- Colors: White
- Finish: Polished
*** Price is per Sheet 0.90 sq ft ***
- Material: Calacatta and Thassos Marble
- Sheet Size: 11"x11.75"
- Thickness: 3/8"
- Colors: White Gold
- Finish: Polished finish
Size:
- 1 inch (diagonal - from point to point) hexagon pieces mounted on 12 x 10 (0.83 sq. ft.) sturdy mesh tile sheet
- 1/16 inch grout width;
- Thickness: 5/16 inch;
- Finish: Polished (Glossy);
- Crema Marfil Polished Marble Penny-Round Mosaic Tile
- Design Type: Marble
- Type: Polished Finish
- Design: Mosaic Tiles
- Color: Beige
- Material Type:Marble
- We sell by: sheet
- Width: 12 Height: 12 Thickness:0.375
- Chip Size (If available)
- Application: Bathroom, Bedroom, Kitchen indoor, and outdoor tiles.
- Product Code:Fancy_group_520
- Product Code: Fancy_group_520
- Sold By Unit: Box
- Coverage Area: 10 FT (square-feet)
- Number of Pieces included in 1 Quantity: 10
- Code: Fancyoption_3968
Item:
- Premium (SELECT) Quality Greek Thassos White Marble
- POLISHED PENNY ROUND MOSAIC TILE W / MING GREEN DOTS (ON-MESH)
Dimensions (per piece):
- 3/4" (Diameter) X 3/8" (Thickness)
Material:
- Premium Greek Thassos White Marble
Coverage:
- 1 sheet = 0.94 sq. ft. (Sheet Size: 11 3/16" (W) X 12 1/16" (L))
Application Area(s):
- Commercial and Residential (Interior & Exterior), Shower, Backsplash, Countertop, Deck & Patio, Decorative, Floor, Wall
Minimum Purchase:
- 10 sq. ft.
Surface Finish:
- Polished (Flawless, smooth satin finish)
Edge Finish:
- Straight cut/Rectified
- SAMPLE SIZE = 6'' X 6''
- FREE SHIPPING APPLIES TO ALL ORDERS
- 1 SAMPLE ALLOWED PER HOUSEHOLD / ADDRESS
- MULTIPLE SAMPLES CAN ONLY BE PURCHASED BY DIRECTLY CONTACTING US
- All items are normally in stock in large quantities.
Shipping Details / Cost
- Shipping is available within the 48 continental US States.
- SHIPPING IS FREE ON ALL ORDERS OF THIS ITEM, UNLESS STATED OTHERWISE.
- Special arrangements may be made for international buyers.
- For large orders and all other shipping related inquiries, please contact our shipping department.
All items are in stock. Normally ships within 1-2 Business days
Item Location
Southern California (Anaheim, CA)
Local Pickup
Available with appointment.
Material Origin
GREECE
Manufacturer / Importer
OTS
- Please keep in mind that each piece of natural stone has unique features that vary it from the others in terms of color, texture and homogeneity. Expect to have some variation between individual pieces when ordering in large quantities.
- Installation of the product requires sealing products and these need to be purchased seperately. (Only the item described in the listing will be shipped out).
A mix of Argentina Sky Blue, Bardiglio and White Thassos marble in heart shaped pieces
*** Price per Sheet ***
- Material: Marble
- Sheet Size: 12"x12"
- Thickness: 3/8"
- Colors: Blue Ocean
- Finish: Polished finish
Can install the residential shower when sealed.
Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious back er units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions and TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8" (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer's recommendations for application instructions.
7. Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout and Tile neutral cleaner.
Maintenance and Care
Required to use a soft bristle brush to scrub the tile surfaces and grout. Take care to only use a soft bristle brush, to avoid the chance of scratching or damaging the grout. Then, simply wipe the surface, rinse well with clean water, and dry with a soft clean towel.
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish
- Marble Pebbles Mosaics Heart Shape - Dark Rose
- A mix of White Thassos, Yellow Onyx and Rosa Norvegia marble in a pebble design mosaic
- ** Price per Sheet ***
- Material: Marble
- Sheet Size: 12" x 12"
- Thickness: 3/8"
- Colors: Rose White
- Finish: Polished finish
- Uses: Exterior Walls, Interior Dry Walls, Interior Floors, Shower Walls, Shower Floors
- Can install the residential shower when sealed.
- Installation Instructions
Recommended Substrates:
- Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
- Cementitious backer units (CBU)-ANSI A118.9.
- Concrete slabs cured for 28 days minimum.
- Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
- Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.
- Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8”away from any naked flame.
- Measuring: Measure coverage area, make sure to purchase at least 10% extra material than is required. This will account for any breakage or mis-cuts during installation, and ensure you have extra material should you have to replace any tile elements in the future.
- Verifying Dye Lot Consistency: The owner or end user is responsible for determining the acceptability of the product. Due to the handmade, artistic nature of our product, variation in color, shade, tone, and size is normal.
- Upon delivery, open and inspect each box of tile.
- Verify dye lot consistency in the following manner. To establish color control samples, randomly select 5 pieces from your order from different boxes.
- To assure shade variations are acceptable check, the remaining sheets or field tile in your order against the control samples, prior to installation.
- If ordering additional materials. Sample shall be sent to help attempt to match previously ordered material.
- Setting Material: Because of the translucent nature of glass, the color of the bonding material will impact the ultimate look of the tile. We highly recommend the use of white polymer modified white thin-set.
Acceptable Thin-Sets (White Color):
- MAPEI: Adesilex P10 Bright White Thin-Set Mortar mixed With Keraply Mortar Additive
- BOSTIK: Glass-Mate™ GLASS TILE MORTAR
- BOSTIK: ReFlex Ultra-Premium Latex Modified Thin-Set Mortar
- LATICRETE: Glass Tile Adhesive
- TEC SPECIALTY PRODUCTS: Super Flex Premium Performance Universal Latex-Modified ThinSet Mortar
Acceptable Grout:
- MAPEI: Keracolor S
- Bostik: Dimensions & TruColor
- LATICRETE: 1500 Sanded Grout
- TEC: AccuColor Premium Sanded Tile Grout
- Cutting: Plan the placement of the tiles on your wall prior to installation. If you need to cut a mosaic sheet, cut from the back using a utility knife between tiles along the grout joints. Should you need to cut across tiles in a fashion that is not possible with a utility knife, use a wet saw with a diamond blade to cut through the tile.
- Drilling: Using a drill bit designed for glass is recommended. When drilling the hole, keep the bit and hole lubricated to prevent chipping. Start by drilling from both ends of the tile, starting with the back and drilling half the depth of the tile. Then, turn the tile over and complete the hole is recommended. This will prevent the glass from chipping as the drill bit exits the tile.
Applying Setting Materials:
Apply setting material using the notched side of a V-notched trowel. Using the flat side of the trowels, smooth out all ridges to achieve a consistent, even 1/8” (3mm) coverage.Apply glass mosaic sheets, mesh -side down, firmly into freshly laid setting material. Mix and match from assorted sell units to achieve consistent variation. Using a rubber grout float gently press the tile into adhesive to ensure complete contact.
Natural Stone should be sealed prior to grouting. A premium penetrating sealer is recommended for a natural look. Please refer to sealer manufacturer’s recommendations for application instructions.
- Cleaning: Clean all excess grout immediately with a damp sponge. After 12 hours polish off any remaining haze with a dry cloth or towel. For tough stains, we require the use of PH Neutral cleaner to clean the tile and grout, such as Grout & Tile neutral cleaner.
- Maintenance & Care
We strongly recommend customers to use a licensed tile contractor to do the tile installation and always use TCNA tile installation handbook as the installation guidance
- Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish