Traditional Steel Gardening and Lawn Care Products

• Metal tines adjust to 4 positions (width 3 - 6 inches) to rake between and around shrubs
• Adjust length (10 - 12 inches) to easily reach behind plants, with your right or left hand
• Bright orange handle is easy to spot in the garden bed and it has a hole for hanging
• Small, light rake makes clean up a snap for gardening, camping, or landscaping - Great gift too!

• Thickness of arm: 1/8 in.
• Thickness of handle: in. diameter
• Width of backplate: 2 in.
• Overall length of arm from backplate: 4 3/16 in.
• Overall height of backplate: 10 in.
• Strike arm thickness: in.
• Strike arm width: in.
• Strike arm length: 7 3/8 in.
• Mounting bracket height: 3 in.
• Mounting bracket width: in.
• Projection (outide of handle): 2 1/8"
• Comes with #10 x1 countersunk screws

Highlights:

• 14-gauge open back steel blade
• Tempered steel blade for Garden Spade and Comfort Step for secure placement
• North American hardwood handle for strength and durability
• Arched blade design cuts sod in straight and curved shapes
• D-grip for added comfort and control

• 9" x 1-1/2"
• Serrated double edge blade of flexible plated steel
• Whip action shaft
• Offers a cost effective way of clearing tall grass and other vegetation in overgrown areas
• Double-edge action provides increased efficiency by cutting on both the forward and return strokes
• Ideal tool to clear ditches, forests, and fields.

• Useful tool for digging perfect
• Deep holes below the frost line
• 48" North American hardwood handles
• 6" point spread
• Hercules pattern, two-piece riveted steel blades with beveled digging edge
• Made in the USA.

Highlights:

• 2" x 4" Head
• 48" Hardwood handle
• Welded blade
• Steel ferrule for strongest blade and handle connection
• Multi-purpose tool for garden maintenance

• Overall Length of Arm: 6"
• Diameter of Ring: 3
• Thickness of Arm: 3/16"
• Width of Arm: 1"
• Front face mounting plate: 2 3/8" x 3 1/8"
• Thickness of Ring: 3/8"
• Catch and Keep: 3" high x wide
• Fasteners: 8 x 1" screws
• Includes pair of Padlock Eyes: 2 1/8" high x 2" width
• Hole diam. Of padlock eye: 5/8" wide x high
• Handles up to 3" thick gates
• Comes complete with 2 rings (operable from both sides of gate)
• Extension spindle available for thicker gates."

FEATURES:

• Access your gates through remote control or keypad
• Smooth and soft start and stop function
• Emergency Release key in case of power failure
• Dual/Single gate running mode
• Optional master and slave gate running
• Adjustable opening/closing interval between master and slave gate
• Stop/Reverse in case of obstruction during gate opening/closing
• The force of the motor can be programmed
• Optional photocell protection (not included)
• Built in adjustable auto-close (programmable from 0-99 sec)
• Digital display indicates the running situation and setting menu
• Reliable electromagnetic limit switches improve adjustment of the 'open' and 'close' position
• Motor: 24V DC, 50W per actuator, 2A current
• Power supply: 110V/60Hz (220V/50Hz - not included)
• Actuator speed: 1.6 cm/second (5/8 inch/second)
• Actuator travel: 385mm (15 3/4")
• Max Weight of each gate panel: 204 kg (450 lbs)
• Max Width of each gate panel: 3 m (10 ft)
• H Bracket Dimensions for 30W Solar Panel (LxW): 15.35 x 9.6 inches
• L Bracket Dimensions (LxW): 5.3 x 1.9 inches
• Auto-closing duration: programmable (from 0 to 99 seconds)
• Ambient temperature: -20C(-4F) ~ +50C(+122F) - MANUAL

PACKAGE INCLUDES:

• 2 (Two) Actuators
• 1 (One) Control Box
• 2 (Two) 8 1/2" x 11" Warning Signs
• 2 (Two) Release key
• 2 (Two) 433MHz remotes LM122
• 2 (Two) ALEKO 30W 24V Solar Panels with H & L Brackets - 1 (One) ALEKO 12V/24V Solar Charge Controller for Solar Panels
• 2 (Two) 22AH Batteries - 1 (One) Wireless Keypad LM172
• 1 (One) Keypad metal cover
• 1 (One) Push button LM147, wired
• 1 (One) Set of Photocell LM102, wired
• 1 (One) Battery box (shape and colors may be vary) - 1 (One) Set of accessories - 1 (One) User Manual with step by step installation instructions
• Wire Sold Separately

Highlights:

• Overall 38" long
• Steel flange for step
• Chrome plate steel handle
• 7-1/2"W x 11-1/2"L steel planter with powder coated finish

• Fiskars 32" PowerGear2 Lopper
• PowerGear patented gear technology multiplies leverage to give you up to 3X more power on every cut
• Makes cutting dramatically easier than it is with other tools
• Powers through thick branches that traditional loppers and pruners can't up to 2" diameter
• Stays sharp even through heavy use
• Low-friction coating helps the blade glide through wood, prevents the blade from gumming up with sap and debris and helps the blade resist rust
• Rounded ergonomic handles with Softgrip enhances comfort and control
• Bypass blade style
• Fully hardened steel blade
• Modified gears and cam mechanism optimizes your cutting power in the middle of the cut where the branch is thickest and you need it most
• Black and orange
• 32"

• Head Weight: 5 lb
• Handle Length: 36"
• Handle Material: Fiberglass
• Product Type: Mattock
• Head Material: High Carbon Steel
• Head Type: Hoe blade/Pick point head
• Double injected fiberglass handle
• Head is made of drop forged, high carbon steel
• Ideal for hoeing in tight quarters or rocky soil.

• What is Duplex System?
• When powder paint is applied to galvanized steel, this is referred to as the Duplex System.
• The Duplex System is the best process used today to protect against any weathering affects of our environment on steel.
• The powder coating actually increases the life of the galvanized steel.
• The paint slows the process of at which the zinc is being consumed.

• What is Galvanized Steel?
• Galvanized Steel is iron that has been through a chemical process that protects the steel from rust and corrosion.
• The steel is submerged in molted zinc at temperatures greater than 800 degrees F.
• This process known as galvanizing, permanently bonds the zinc to the steel. The zinc is now a shield for the iron.

• Why Powder Coated Paint?
• Powder coating is the technique of applying dry paint to an item.
• The item(s) are then placed in an stove and heated in temperatures that range from 300 to 400 degrees F (depending on the powder).
• When powder coated items are installed correctly and maintained, they should be permanent.
• Unlike conventional paints, powder coated paints will not peel, chip or crack.

Highlights:

• Length: 28"
• Cutting capacity: 1-5/8"
• Ideal for cutting thick branches
• Bypass blade style
• Power-lever mechanism increases leverage to make cutting 2 times easier than single pivot loppers
• Sharp, precision ground blade edge
• Fully hardened blade holds sharp edge longer
• Corrosion resistant, non-stick blade coating reduces friction to make cutting easier
• Durable steel handles
• Shock absorbing bumper reduces stress
• Bypass blade for clean cuts of green, living growth

• "FLEXRAKE" WOOD HANDLE STEEL RAKE
• 19" wide.
• Lawn Rake
• Flex Steel Head
• 48" Premium Wood Handle.
• 25 Extra Wide Curved Tines.
• Heat Treated Spring Steel.
• Steel head is made of high-carbon spring steel.
• Grooms through the surface for a healthy lawn.
• Shape of rake head assures constant pressure on the ground at all times.
• Acrylic-coated wood handle and dark green colored rake head.

• 16" closed back steel blade
• 48" North American hardwood handle for strength and durability
• Forward turned step for secure foot placement
• Great for transplanting live trees and shrubs
• Made in the USA.

Highlights:

• Length: 25" 37"
• Cutting capacity: 1-5/8"
• Ideal for cutting thick branches
• Bypass blade style
• Power-Lever technology multiplies leverage to give you up to two times more cutting power
• Extendable handles make cutting high branches or cutting at awkward angles easy
• Fully hardened, precision-ground steel blade stays sharp, even through heavy use
• Low-friction coating helps the blade glide through wood, prevents the blade from gumming up with sap and debris and helps the blade resist rust
• Softgrip touchpoints enhance comfort and control
• Steel construction provides lasting durability

• 10" x 6" forged perforated blade
• 66" north American hardwood handle
• 8" steel ferrule with cap for strongest blade and handle connection
• Forged gooseneck shank pattern
• Made in the USA.

• Great for many soils
• Comfort grip handles
• Spiral turn action
• No bending
• Easy to hang and store
• Fully assembled
• Overall height = 38”.

• It works in any soil
• There’s no bending or lifting involved
• Cultivated soil absorbs water, instead of it running off, yielding healthier roots and plants
• Garden Claw can even be used as a compost turner.

Using the Weasel Garden Claw Cultivator:

• Fiskars 5/8" Capacity Softgrip Pruner
• Razor-sharp precision-ground blade cuts with less resistance than thicker blades and stays sharp for lasting value
• Low-friction coating resists rust, helps the blade glide through wood and prevents the pruner from gumming up with sap and debris
• Bypass blade design is ideal for pruning green, living growth like ornamental shrubs and trees
• Fully hardened steel blade
• Black and orange
• 5/8" cut capacity

Features:

• Earth Auger Bit - 4" Earth Auger Bit fits for common hand-held post-hole diggers with 3/4" shaft; Dig holes up to 31.5" in depth and 4" in width in most soil types, like silty, peaty, gravel, pebble, dry cracked soil, etc.
• Good Performance & Convenience - Features subulate tip & spiral blade for penetrating the ground quickly, increasing planting speed & shortening working time, which enhances the working efficiency; Leave dirt around the edge of dug hole for easy packing & cleaning
• Durability - Durable cast steel pilot bit with glossy painted finish features rust & corrosion resistance and high – strength for a long lifespan
• Wide Application - 4" Auger Bit suitable for gardening projects like planting bulbs, potted plants, vegetables, flowers, shrubs & mixing seed, soil, fertilizer; Ideal for installation projects like installing wooden decorative fence, chain link fence, drilling flag holes etc.

Specifications:

• Overall Dimension(H x D): 31 1/2" x 4" (800 x 100 mm)
• Fit for: Digger with 3/4" shaft
• Net Weight: 4 Lbs (1.8 kg)

Package Contents:

Notice:

• For avoid accidents, it is recommended that not use this product for drilling ice.
• The colour of the pin on the auger bit is random.