Rok Hardware and Sugatsune America, Inc. Traditional Cabinet and Drawer Hardware

• H-type (Heavy-duty series)
• For TOP-OPENING FLAP DOOR with piano, butt, or concealed hinges.
• Opens to 70 degrees.
• Holds the door in a fully-opened position.
• Used in pairs (left/right)
• 3.5x15 steel screws provided.
• Available in 3 weight ranges: Light Duty, Medium Duty, and Heavy Duty.

• Torque Calculation: Torque = Door Height x 1/2 x Door Weight
• K-Type (Light Duty): 140~200 kg-cm (121~173 lbs-inch) per pair

• H-Type (Heavy Duty): 250~300 kg-cm (216~260 lbs-inch) per pair
• This product may expose its users to certain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

• Add a gentle, soft closing close to your drawers
• For Face Frame & Frameless Cabinets
• Installs easily without measuring (no jig needed)
• Requires 1/2" side clearance
• Installation screws included: 1x ROKS7X1FPCNP #7x1" nickel flat head screw & 3x ROKS6X12PPSZ #6x1/2" zinc pan head screws.
• Minimum drawer box height must be equal or greater than 2-3/16" + drawer slide height

Note:

• Will work ONLY for wood or melamine drawers with side-mounted epoxy slides.
• Most drawers only require one adapter. We recommend 2 adapters for heavier drawers or drawers that are 24" and wider.
• Adding soft close to any drawer will give the drawer some resistance when opening. This is due to the nature of the soft close mechanism.
• DOES NOT work for undermount glides (hidden/concealed)

Also available in:

• Width: 1-25/32"
• Depth: 15/16"
• Center to Center: 1-1/4" (32mm)
• Height: 7/8"
• Color/Finish: White
• Material: Metal
• Holding Power: 15.4 lb

• Includes strikes and screws
• 1/2" Front to back adjustment

• Finish: Black
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

Cabinet door use:

• 1 - Align the template and mark door front for knob or pull according to center to center distance and placement desired.
• 2 - Drill the holes that you marked.
• 3 - Install the knob or pull. Repeat the process for the other doors.

Drawers use:

• 1 - Measure and mark the midpoint of the drawer.
• 2 - Align the center point of the template with the midpoint and mark for knob or pull at desired height.
• 3 - Drill the holes you marked.
• 4 - Install the knob or pull. Repeat the process for other drawers.

Kit includes:

• , 1, Knob Drilling Template
• , 1, Pull Drilling Template
• , 1, 3/16" Drill bit

• Finish: White
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Finish: White
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Plate: 57.1 mm (2.247") long, 35 mm (1.379") wide, 0.03 gauge.
• Ball catch: 54.5 mm (2.142") long, 23.2 mm (0.92") wide, 21 mm (0.825") ball holder.

• Length: 2-9/64" (54.5 mm).
• Width: 29/32" (23.2 mm).

• Finish: Black
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Dampens the harsh sounds of slamming cabinet doors and drawers by up to 30%
• Incredible dampening quality
• Made in the USA
• 1/2" Diameter (12.7mm)
• 1/5" Height (5.1mm)
• For doors, drawers, cutting boards, coasters, electronics and more.

• No more slamming drawers with these soft close drawer slides. Soft-close device dampens and absorbs force, causing it to close slowly and quietly.
• Extremely light.
• 2" soft close stroke.
• Full Extension
• Height: 1-13/16" (45.7mm)
• Zinc Finish
• Requires a 1/2" side spacing per side (Overall 1")
• Pull force of 5.5 to 6.5 lbs
• Includes mounting screws

• Width: 1-25/32"
• Depth: 15/16"
• Center to Center: 1-1/4" (32mm)
• Height: 7/8"
• Color/Finish: White
• Material: Metal
• Holding Power: 15.4 lb

• Includes strikes and screws
• 1/2" Front to back adjustment

• Width: 1-15/32" (37 mm)
• Depth: 1-5/32" (29 mm)
• Center to Center: 31/32" (25 mm)
• Material: Steel
• Installation Screws Included

• No more slamming drawers with these soft close drawer slides. Soft-close device dampens and absorbs force, causing it to close slowly and quietly.
• Extremely light.
• 2" soft close stroke.
• Full Extension
• Height: 1-13/16" (45.7mm)
• Zinc Finish
• Requires a 1/2" side spacing per side (Overall 1")
• Pull force of 5.5 to 6.5 lbs
• Includes mounting screws
• Sold per pair

• K-type (Light-duty series)
• For TOP-OPENING FLAP DOOR with piano, butt, or concealed hinges.
• Opens to 70 degrees.
• Holds the door in a fully-opened position.
• Used in pairs (left/right)
• 3.5x15 steel screws provided.
• Available in 3 weight ranges: Light Duty, Medium Duty, and Heavy Duty.

• Torque Calculation: Torque = Door Height x 1/2 x Door Weight
• K-Type (Light Duty): 140~200 kg-cm (121~173 lbs-inch) per pair

• H-Type (Heavy Duty): 250~300 kg-cm (216~260 lbs-inch) per pair
• This product may expose its users to certain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

• Unique ultra thin magnetic catch design with
• Extra strong magnetic force
• ROHS compliant
• Great for use on cabinet doors.
• Only 3/16" thick with a magnetic force of 8.8lbs
• Easy install Screws and strick plate are included

Also available in:

• Brown: (Search: ML-80/BRN)
• White: (Search: ML-80/WHT)

• Finish: White
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Width: 2-1/4"
• Depth: 31/32"
• Center to Center: 1-23/32"
• Height: 7/8"
• Finish: Aluminum
• Material: Metal
• Magnetic Holding power: 4.4Lb
• Includes mounting screws.

• Width: 2-1/4"
• Depth: 31/32"
• Center to Center: 1-23/32"
• Height: 7/8"
• Finish: Aluminum
• Material: Metal
• Magnetic Holding power: 4.4Lb
• Includes mounting screws.

• Has a pull force of 4.5 to 5.5 lbs
• Rolled, stamped steel
• Includes screws
• Perfect for dressers, doors, and cabinets!
• Sturdy catch provides a secure door closure
• Simple installation!
• Brown/copper finish
• Depth: 9/16"
• Center to Center: 15/16"
• Material: Metal

• Length of Latch: 1-1/16" (27mm)
• Width of Latch: 5/8" (32mm)

• Length of Strike: 5/8" (15.5mm)
• Width of Strike: 1-1/4" (31.4mm)

• This lid stay is ideal for upward opening flaps, such as vanity lids and toy boxes.
• Opens to a 105 degree angle.

Torque moment formulas as follows:

• Use one support per 43 inch/lbs.
• Determine inch/lbs with this formula: (lid wt. X front to back size) divided by 2.

• Recommended door thickness 20 mm (25/32")
• Screws included

• Width: 2-1/4"
• Depth: 31/32"
• Center to Center: 1-23/32"
• Height: 7/8"
• Finish: Aluminum
• Material: Metal
• Magnetic Holding power: 4.4Lb
• Includes mounting screws.

• No more slamming drawers with these soft close drawer slides. Soft-close device dampens and absorbs force, causing it to close slowly and quietly.
• Extremely light.
• 2"" soft close stroke.
• Slide Travel Distance: 12-1/2" (Full Extension)
• Height: 1-13/16"" (45.7mm)
• Zinc Finish
• Requires a 1/2"" side spacing per side (Overall 1"")
• Pull force of 5.5 to 6.5 lbs
• Includes mounting screws