WAC Lighting Fully Assembled Outdoor Lights

LED outdoor 12V tape light available in 2700K warm or 3000K soft white and in 1, 5, and 10ft sections that can conveniently tap into an existing 12V landscape lighting system. Flexible double insulated silicon UV stabilized encasement that protects against water and outdoor elements with distinct electrical and mechanical junctions for a superior watertight system. IP68 rated for wet locations or continuous immersion up to 5 meters underwater. A maximum of 40ft per run, requires a Magnetic (preferred) or Electronic Power supply.

• Flexible double insulated silicon UV stabilized encasement that protects against water and outdoor elements.
• Distinct electrical and mechanical junctions for a superior watertight system.
• LED outdoor 12V tape light available in 2700K warm or 3000K soft white and in 1, 5, and 10ft sections.
• Can conveniently tap into an existing 12V landscape lighting system. Requires a 12V Magnetic (preferred) or Electronic Power Supply.
• High Powered LED, Input: 9-15V AC, Power: 2W/ft (up to 2VA), Brightness: 115Lm/ft, CRI: 85, Rated Hours: 60,000.
• Standards: UL 1838 & IP68 Rated for Wet and Submersible Locations.
• UL1838, IP68
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

With a sleek profile and no visible hardware, LED me Step and Wall Lights are designed to seamlessly blend into any architecture. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs, walls and walkways with little or no glare. Cast aluminum body is sealed for both indoor and outdoor applications.

• Die-cast aluminum available in multiple finishes, or marine grade rated stainless steel (SS finish lifetime warranty).
• Available in 120V or 277V direct wiring, no driver necessary.
• Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation.
• Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer.
• Fits into 2"-4" J-Box with minimum inside dimensions of 3"x2"x2"D. Standards: UL & ETL Listed.

Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.9W, Lumens: Up to 68, CRI: 85, 40,000 hours rated life.

• ETL, cETL, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

Simplicity meets function and durability with this ground breaking patented WAC Landscape Lighting 3in Inground Well Light, available in 12V LED or 120V LED and 2700K Warm White or 3000K Soft White color temperature options. Rated to support over 4,500lbs of drive over protection. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This Well Light features indexed beam adjustment at 15, 30, 45, or 60 degrees, light output modification from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment up to 20 degrees in either direction. A Quick and simple twist of the fixture lens at indexed intervals allows adjustment of the beam angle. Light output can also be continuously adjusted from 12W to 2W (11.5 to 3 in 120V) by the twist of a dial. Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements. Available in a bronze finish with an aluminum construction or in a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a 6ft lead wire and direct burial gel filled wire nuts. Power supply is required for 12V option, additional accessories including a concrete pour kit, and rock guard are available for various mounting and installation options.
Available in a bronze finish with an aluminum construction or a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine environments.

• Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements.

Features patented indexed adjustable beam angle at 15, 30, 45, and 60 degrees with continuously adjustable light output from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment in either direction up to 20 degrees.

• Includes a 6ft lead wire and direct burial gel filled wire nuts. Magnetic (preferred) or Electronic Power supply is required for 12V version.

High Powered LED, Input: 9-15V AC, Power: 2-12W (23VA), Brightness: 70-505Lm, Beam Angle: 15, 30, 45, 60Deg, Tilt: +/- 20 Deg, CRI: 85, Rated Hours: 70,000.

• Standards: UL 1838 & IP67 Rated for Wet Locations.
• UL 1838, IP67
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

Simplicity meets function and durability with this ground breaking patented WAC Landscape Lighting Accent Light, available in 12V LED or 120V LED and 2700K Warm White or 3000K Soft White color temperature options. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This Accent Light features continuous beam adjustment from 60 degree flood to 10 degree spot, and light output modification from 16W to 2W (14.5 to 3.5 in 120V). A Quick and simple twist of the fixture at indexed intervals allows continuous adjustment of the beam angle to perform the consolidated task of dozens of comparable landscape lights. Light output can also be continuously adjusted from 16W to 2W (14.5 to 3.5 in 120V) by the twist of a dial. Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements. Available in a bronze finish with an aluminum construction or in a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a detachable shroud, mounting stake (Low Voltage Only), 6ft lead wire and direct burial gel filled wire nuts. Power supply is required for 12V option, additional accessories are available for various mounting and installation options.
Available in a bronze finish with an aluminum construction or a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.

Features patented continuously adjustable beam angle from 60 degree flood to 10 degree spot and continuously adjustable light output from 16W to 2W (14.5 to 3.5 in 120V).
Includes a detachable shroud, mounting stake (Low Voltage Only), 6ft lead wire and direct burial gel filled wire nuts. Magnetic or Electronic Power supply is required for 12V version. Use 9000-RPT-BK Power Spike for Line Voltage.

• High Powered LED, Input: 9-15V AC, Power: 2-16W (23VA), Brightness: 190-1045Lm, Beam Angle: 10-60Deg, CRI: 85, Rated Hours: 70,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL 1838, IP66
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

Simplicity meets function and durability with this ground breaking patented WAC Landscape Lighting Accent Light, available in 12V LED or 120V LED and 2700K Warm White or 3000K Soft White color temperature options. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This Accent Light features continuous beam adjustment from 60 degree flood to 10 degree spot, and light output modification from 16W to 2W (14.5 to 3.5 in 120V). A Quick and simple twist of the fixture at indexed intervals allows continuous adjustment of the beam angle to perform the consolidated task of dozens of comparable landscape lights. Light output can also be continuously adjusted from 16W to 2W (14.5 to 3.5 in 120V) by the twist of a dial. Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements. Available in a bronze finish with an aluminum construction or in a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a detachable shroud, mounting stake (Low Voltage Only), 6ft lead wire and direct burial gel filled wire nuts. Power supply is required for 12V option, additional accessories are available for various mounting and installation options.
Available in a bronze finish with an aluminum construction or a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.

Features patented continuously adjustable beam angle from 60 degree flood to 10 degree spot and continuously adjustable light output from 16W to 2W (14.5 to 3.5 in 120V).
Includes a detachable shroud, mounting stake (Low Voltage Only), 6ft lead wire and direct burial gel filled wire nuts. Magnetic or Electronic Power supply is required for 12V version. Use 9000-RPT-BK Power Spike for Line Voltage.

• High Powered LED, Input: 9-15V AC, Power: 2-16W (23VA), Brightness: 190-1045Lm, Beam Angle: 10-60Deg, CRI: 85, Rated Hours: 70,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL 1838, IP66
• Energy Start: No

Simplicity meets function and durability with this ground breaking patented WAC Landscape Lighting Accent Light, available in 12V LED or 120V LED and 2700K Warm White or 3000K Soft White color temperature options. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This Accent Light features continuous beam adjustment from 60 degree flood to 10 degree spot, and light output modification from 16W to 2W (14.5 to 3.5 in 120V). A Quick and simple twist of the fixture at indexed intervals allows continuous adjustment of the beam angle to perform the consolidated task of dozens of comparable landscape lights. Light output can also be continuously adjusted from 16W to 2W (14.5 to 3.5 in 120V) by the twist of a dial. Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements. Available in a bronze finish with an aluminum construction or in a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a detachable shroud, mounting stake (Low Voltage Only), 6ft lead wire and direct burial gel filled wire nuts. Power supply is required for 12V option, additional accessories are available for various mounting and installation options.
Available in a bronze finish with an aluminum construction or a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.

Features patented continuously adjustable beam angle from 60 degree flood to 10 degree spot and continuously adjustable light output from 16W to 2W (14.5 to 3.5 in 120V).
Includes a detachable shroud, mounting stake (Low Voltage Only), 6ft lead wire and direct burial gel filled wire nuts. Magnetic or Electronic Power supply is required for 12V version. Use 9000-RPT-BK Power Spike for Line Voltage.

• High Powered LED, Input: 110-120V AC, Power: 3.5-14.5W (23VA), Brightness: 100-795Lm, Beam Angle: 15-60Deg, CRI: 85, Rated Hours: 45,000.
• Standards: UL 1598 & IP66 Rated for Wet Locations.
• UL 1598, IP66
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

Simple, clean and efficient. The WAC Landscape Lighting Linear Path and Area Lights offer an elegant option for outdoor path and area lighting for both homes and commercial spaces. Made from durable K-alloy aluminum, this path light can conveniently tap into an existing 12V landscape lighting system. The Area Light has a solid brass option which provides enhanced protection against corrosion in coastal or marine grade environments.

• Manufactured with a durable K-alloy aluminum construction for resistance to harsh outdoor environments.
• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in linear path, round path, and area light versions.
• Can conveniently tap into an existing 12V landscape lighting system.
• High Powered LED, Input: 9-15V AC, Power: 2.9W (4.7VA), Brightness: up to 95Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED outdoor 12V tape light available in 2700K warm or 3000K soft white and in 1, 5, and 10ft sections that can conveniently tap into an existing 12V landscape lighting system. Flexible double insulated silicon UV stabilized encasement that protects against water and outdoor elements with distinct electrical and mechanical junctions for a superior watertight system. IP68 rated for wet locations or continuous immersion up to 5 meters underwater. A maximum of 40ft per run, requires a Magnetic (preferred) or Electronic Power supply.

• Flexible double insulated silicon UV stabilized encasement that protects against water and outdoor elements.
• Distinct electrical and mechanical junctions for a superior watertight system.
• LED outdoor 12V tape light available in 2700K warm or 3000K soft white and in 1, 5, and 10ft sections.
• Can conveniently tap into an existing 12V landscape lighting system. Requires a 12V Magnetic (preferred) or Electronic Power Supply.
• High Powered LED, Input: 9-15V AC, Power: 2W/ft (up to 2VA), Brightness: 115Lm/ft, CRI: 85, Rated Hours: 60,000.
• Standards: UL 1838 & IP68 Rated for Wet and Submersible Locations.
• UL1838, IP68
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

Simplicity meets function and durability with this ground breaking patented WAC Landscape Lighting 3in Inground Well Light, available in 12V LED or 120V LED and 2700K Warm White or 3000K Soft White color temperature options. Rated to support over 4,500lbs of drive over protection. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This Well Light features indexed beam adjustment at 15, 30, 45, or 60 degrees, light output modification from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment up to 20 degrees in either direction. A Quick and simple twist of the fixture lens at indexed intervals allows adjustment of the beam angle. Light output can also be continuously adjusted from 12W to 2W (11.5 to 3 in 120V) by the twist of a dial. Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements. Available in a bronze finish with an aluminum construction or in a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a 6ft lead wire and direct burial gel filled wire nuts. Power supply is required for 12V option, additional accessories including a concrete pour kit, and rock guard are available for various mounting and installation options.
Available in a bronze finish with an aluminum construction or a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine environments.

• Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements.

Features patented indexed adjustable beam angle at 15, 30, 45, and 60 degrees with continuously adjustable light output from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment in either direction up to 20 degrees.

• Includes a 6ft lead wire and direct burial gel filled wire nuts. Magnetic (preferred) or Electronic Power supply is required for 12V version.

High Powered LED, Input: 110-120V AC, Power: 3.5-11.5W (23VA), Brightness: 65-515Lm, Beam Angle: 15, 30, 45, 60Deg, Tilt: +/- 20 Deg, CRI: 85, Rated Hours: 45,000.

• Standards: UL 1598 & IP67 Rated for Wet Locations.
• UL 1598, IP67
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED Landscape recessed inground indicator luminaire for soft ground applications available in 1 or 2 inch sizes with round, slim, and square face plate options. The indicator light is perfect for both indoor and outdoor applications, including wells and ponds, deck and patios, inground, as well as ceiling and wall applications. Factory sealed and IP68 rated for wet locations or continuous immersion up to 5 meters underwater. Each indicator light includes 6ft of low voltage burial cable, direct burial gel filled wire nuts, and an optional spring retention clip. Magnetic (preferred) or Electronic Power supply is required. Concrete pour kits are available for additional installation options.
Manufactured with a stainless steel construction and available in a stainless steel finish or a bronzed stainless steel finish. Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP68 rated for wet locations or protection against water immersion up to 5m deep and outdoor elements.

Each indicator light includes 6ft of low voltage burial cable, direct burial gel filled wire nuts, and optional spring retention clip. Magnetic (preferred) or Electronic Power supply is required.

• Concrete pour kits are available for additional installation options.
• High Powered LED, Input: 9-15V AC, Power: 4W (7VA), Brightness: up to 170Lm, CRI: 85, Rated Hours: 70,000.
• Standards: UL 1838 & IP68 Rated for Wet and Submersible Locations.
• UL1838, IP68
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED Landscape recessed inground indicator luminaire for soft ground applications available in 1 or 2 inch sizes with round, slim, and square face plate options. The indicator light is perfect for both indoor and outdoor applications, including wells and ponds, deck and patios, inground, as well as ceiling and wall applications. Factory sealed and IP68 rated for wet locations or continuous immersion up to 5 meters underwater. Each indicator light includes 6ft of low voltage burial cable, direct burial gel filled wire nuts, and an optional spring retention clip. Magnetic (preferred) or Electronic Power supply is required. Concrete pour kits are available for additional installation options.
Manufactured with a stainless steel construction and available in a stainless steel finish or a bronzed stainless steel finish. Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP68 rated for wet locations or protection against water immersion up to 5m deep and outdoor elements.

Each indicator light includes 6ft of low voltage burial cable, direct burial gel filled wire nuts, and optional spring retention clip. Magnetic (preferred) or Electronic Power supply is required.

• Concrete pour kits are available for additional installation options.
• High Powered LED, Input: 9-15V AC, Power: 4W (7VA), Brightness: up to 170Lm, CRI: 85, Rated Hours: 70,000.
• Standards: UL 1838 & IP68 Rated for Wet and Submersible Locations.
• UL1838, IP68
• Energy Start: No

LED me 12V Step and wall lights available in 3000K soft white or 2700K warm white can be installed on a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Stainless steel and brass quality constructions are available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Step and wall lights are manufactured with a stainless steel, aluminum, or brass construction available in a variety of finishes. Brass and Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2W (3VA), Brightness: up to 68Lm, CRI: 90, Rated Hours: 60,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

LED outdoor 12V tape light available in 2700K warm or 3000K soft white and in 1, 5, and 10ft sections that can conveniently tap into an existing 12V landscape lighting system. Flexible double insulated silicon UV stabilized encasement that protects against water and outdoor elements with distinct electrical and mechanical junctions for a superior watertight system. IP68 rated for wet locations or continuous immersion up to 5 meters underwater. A maximum of 40ft per run, requires a Magnetic (preferred) or Electronic Power supply.

• Flexible double insulated silicon UV stabilized encasement that protects against water and outdoor elements.
• Distinct electrical and mechanical junctions for a superior watertight system.
• LED outdoor 12V tape light available in 2700K warm or 3000K soft white and in 1, 5, and 10ft sections.
• Can conveniently tap into an existing 12V landscape lighting system. Requires a 12V Magnetic (preferred) or Electronic Power Supply.
• High Powered LED, Input: 9-15V AC, Power: 2W/ft (up to 2VA), Brightness: 115Lm/ft, CRI: 85, Rated Hours: 60,000.
• Standards: UL 1838 & IP68 Rated for Wet and Submersible Locations.
• UL1838, IP68
• Energy Start: No

LED me 12V deck and patio lights available in 3000K soft white or 2700K warm white and in round, triangle, and rectangular shapes that can conveniently tap into a 12V landscape lighting system. Factory sealed and IP66 rated for wet locations. Aluminum and brass quality construction is available for enhanced protection in coastal or marine grade environments. Magnetic (preferred) or Electronic Power supply is required.
Manufactured in an aluminum, or brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP66 rated for protection against high-pressure water jets and outdoor elements.
• Magnetic (preferred) or Electronic Power supply is required. Available in round, triangle, and rectangular shapes.
• Use EN-1260-R2 power supply when wiring indoors with direct line voltage, or a WAC Landscape transformer for outdoors applications.
• High Powered LED, Input: 9-15V AC, Power: 2.8W (4.6VA), Brightness: up to 60Lm, CRI: 90, Rated Hours: 50,000.
• Standards: UL 1838 & IP66 Rated for Wet Locations.
• UL1838, IP66
• Energy Start: No

Simplicity meets function and durability with this ground breaking patented WAC Landscape Lighting 3in Inground Well Light, available in 12V LED or 120V LED and 2700K Warm White or 3000K Soft White color temperature options. Rated to support over 4,500lbs of drive over protection. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This Well Light features indexed beam adjustment at 15, 30, 45, or 60 degrees, light output modification from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment up to 20 degrees in either direction. A Quick and simple twist of the fixture lens at indexed intervals allows adjustment of the beam angle. Light output can also be continuously adjusted from 12W to 2W (11.5 to 3 in 120V) by the twist of a dial. Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements. Available in a bronze finish with an aluminum construction or in a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a 6ft lead wire and direct burial gel filled wire nuts. Power supply is required for 12V option, additional accessories including a concrete pour kit, and rock guard are available for various mounting and installation options.
Available in a bronze finish with an aluminum construction or a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine environments.

• Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements.

Features patented indexed adjustable beam angle at 15, 30, 45, and 60 degrees with continuously adjustable light output from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment in either direction up to 20 degrees.

• Includes a 6ft lead wire and direct burial gel filled wire nuts. Magnetic (preferred) or Electronic Power supply is required for 12V version.

High Powered LED, Input: 9-15V AC, Power: 2-12W (23VA), Brightness: 70-505Lm, Beam Angle: 15, 30, 45, 60Deg, Tilt: +/- 20 Deg, CRI: 85, Rated Hours: 70,000.

• Standards: UL 1838 & IP67 Rated for Wet Locations.
• UL 1838, IP67
• Energy Start: No

Stylish and bold. Make an illuminating statement with this fixture. An ideal lighting fixture for your home. 

Number of Bulbs:

Bulb Type:

Bulb Wattage:

• Bulb Included: No

UL Listing:

Simplicity meets function and durability with this ground breaking patented WAC Landscape Lighting 3in Inground Well Light, available in 12V LED or 120V LED and 2700K Warm White or 3000K Soft White color temperature options. Rated to support over 4,500lbs of drive over protection. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This Well Light features indexed beam adjustment at 15, 30, 45, or 60 degrees, light output modification from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment up to 20 degrees in either direction. A Quick and simple twist of the fixture lens at indexed intervals allows adjustment of the beam angle. Light output can also be continuously adjusted from 12W to 2W (11.5 to 3 in 120V) by the twist of a dial. Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements. Available in a bronze finish with an aluminum construction or in a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a 6ft lead wire and direct burial gel filled wire nuts. Power supply is required for 12V option, additional accessories including a concrete pour kit, and rock guard are available for various mounting and installation options.
Available in a bronze finish with an aluminum construction or a bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements and is recommended in coastal and marine environments.

• Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements.

Features patented indexed adjustable beam angle at 15, 30, 45, and 60 degrees with continuously adjustable light output from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment in either direction up to 20 degrees.

• Includes a 6ft lead wire and direct burial gel filled wire nuts. Magnetic (preferred) or Electronic Power supply is required for 12V version.

High Powered LED, Input: 9-15V AC, Power: 2-12W (23VA), Brightness: 70-505Lm, Beam Angle: 15, 30, 45, 60Deg, Tilt: +/- 20 Deg, CRI: 85, Rated Hours: 70,000.

• Standards: UL 1838 & IP67 Rated for Wet Locations.
• UL 1838, IP67
• Energy Start: No

LED Landscape luminaire for well, pond, or pool applications. Factory sealed and IP68 rated for wet locations or continuous immersion up to 5 meters underwater. Includes 30ft of low voltage burial cable, direct burial gel filled wire nuts, and an optional mounting and aiming clip. Magnetic (preferred) or Electronic Power supply is required.
Manufactured with a stainless steel construction. Stainless Steel may provide enhanced protection against corrosive elements and is recommended in coastal and marine grade environments.

• Factory sealed water tight and IP68 rated for wet locations or protection against water immersion up to 5m deep and outdoor elements.

Includes 30ft of low voltage submersible wire, direct burial gel filled wire nuts, and optional aiming bracket. Magnetic (preferred) or Electronic Power supply is required.

• Concrete pour kits are available for additional installation options.
• High Powered LED, Input: 9-15V AC, Power: 4W (7VA), Brightness: up to 170Lm, CRI: 85, Rated Hours: 70,000.
• Standards: UL 1838 & IP68 Rated for Wet and Submersible Locations.
• UL1838, IP68
• Energy Start: No

With a sleek profile and no visible hardware, LED me Step and Wall Lights are designed to seamlessly blend into any architecture. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs, walls and walkways with little or no glare. Cast aluminum body is sealed for both indoor and outdoor applications.

• Die-cast aluminum available in multiple finishes, or marine grade rated stainless steel (SS finish lifetime warranty).
• Available in 120V or 277V direct wiring, no driver necessary.
• Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation.
• Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer.
• Fits into 2"-4" J-Box with minimum inside dimensions of 3"x2"x2"D. Standards: UL & ETL Listed.

Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.9W, Lumens: Up to 68, CRI: 85, 40,000 hours rated life.

• ETL, cETL, IP66
• Energy Start: No