Transitional Countertop Support Brackets

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

The Stout Iron Corbel gets its name from the sold single center support that arches back slightly improving leg/knee room. Its design is elegantly simple allowing it to work in a wide variety of home styles.People just like you use our Stout corbels to support granite and stone counter top overhangs, fireplace mantels, kitchen island overhangs, bar tops and much more.
There are two 3/8" thick center designs welded together in this 1.5-inch wide. Giving this bracket its strength and dimension. The L-Bracket is made from thick 1/4-inch steel and features holes for mounting the bracket to any surface. 2 holes are included in the top part of this bracket, their use is optional if the application needs them, for example you may want to secure shelving or mantels to your bracket.

Specifications

• Dimensions: L-bracket is 1/4-inch thick by 1.5" wide with a 3/4" Thick center support.
• Bracket Sizes: 5 x 7 | 6 x 8 | 7 x 9 | 8 x 10 | 9 x 11 | 10 x 12
• Material: Iron
• Iron Finish Options: 4 Iron Finishes Available
• Pictured: Stout Iron Corbel with Black Finish
• Additional Info.

Product Type: Corbel or Bracket

• Function: Support Granite/Natural stone counter top overhangs, shelves, mantels & more.
• Style:Transitional
• Country of Manufacture: USA
• Eco-Friendly: Yes
• Care: Wipe clean with dry cloth
• Assembly Required: Installation is required but the product is one solid piece
• Included: Brackets sold individually (mounting hardware is not included)
• Copyright: This design is protected.
• What Size? How Many?
• This information is provided by The Marble Institute of Americas published requirements for granite countetops.
• What size corbel do I order?
• Your Countertop overhang should not extend past the corbel by more than 4 to 6 inches.
• Example: If your countetop overhang is 10-inches you will want a bracket that measures at least 5 to 6 inches deep.
• All our corbel measurements are listed as depth x height | Example: a 6" x 8" corbel is 6 inches deep and 8 inches high.

Notes From a Designer: Corbels are meant to be seen. So they generally look best when they are 2/3 as deep as the countertop overhang itself. As an example, when we design countetop overhangs we will keep the end of the corbel 2-4" from the end of the countertop overhang. This does exceed the Marble Institutes requirements but it looks much better from a design perspective.

• How many corbels do I order?
• Corbels are generally spaced 24 to 36 inches apart under countertop overhangs.
• To figure out how many corbels you need lets start with 2 corbels at each end of the countertop set 4" to 6" inches in, from the edge.
• Now measure the span left between the 2 end corbels and use the following formula: (span left) divided by (desired spacing).

Example; an 84" wide countertop with 2 brackets set 4 inches from the end would leave you with 76 inches left to support; (84" - 8" = 76"). Now take 76" divided/by 24" = 3.1, so you would need 3 more corbels for a total of 5 brackets.
For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 24 inch span between corbels, you would order 5 brackets total. 2 ends brackets and 3 to support the remaining 76" span.
For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 36 inch span between corbels, you would order 4 brackets total. 2 ends brackets and 2 to support the remaining 76" span.

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

The Stout Iron Corbel gets its name from the sold center support that arches back slightly improving leg/knee room. Its design is elegantly simple allowing it to work in a wide variety of home styles. People just like you use our Stout corbels to support granite and stone counter top overhangs, fireplace mantels, kitchen island overhangs, bar tops and much more.
There are six 3/8" thick center designs welded together in this 3-inch wide. Giving this bracket its strength and dimension. The L-Bracket is made from thick 1/4-inch steel and features 3 holes for mounting the bracket to any surface. 2 holes are included in the top part of this bracket, their use is optional if the application needs them, for example you may want to secure shelving or mantels to your bracket.

Specifications

• Dimensions: L-bracket is 1/4-inch thick by 3" wide with a 2-1/4" Thick center support.
• Bracket Sizes: 5 x 7 | 6 x 8 | 7 x 9 | 8 x 10 | 9 x 11 | 10 x 12
• Material: Iron
• Iron Finish Options: 4 Iron Finishes Available
• Pictured: Stout Iron Corbel with Black Finish
• Additional Info.

• Product Type: Corbel or Bracket
• Function: Support Granite/Natural stone counter top overhangs, shelves, mantels & more.
• Style: Transitional
• Country of Manufacture: USA
• Eco-Friendly: Yes
• Care: Wipe clean with dry cloth
• Assembly Required: Installation is required but the product is one solid piece
• Included: Brackets sold individually (mounting hardware is not included)
• Copyright: This design is protected.
• What Size? How Many?
• This information is provided by The Marble Institute of Americas published requirements for granite countetops.
• What size corbel do I order?
• Your Countertop overhang should not extend past the corbel by more than 4 to 6 inches.
• Example: If your countetop overhang is 10-inches you will want a bracket that measures at least 5 to 6 inches deep.
• All our corbel measurements are listed as depth x height | Example: a 6" x 8" corbel is 6 inches deep and 8 inches high.

Notes From a Designer: Corbels are meant to be seen. So they generally look best when they are 2/3 as deep as the countertop overhang itself. As an example, when we design countetop overhangs we will keep the end of the corbel 2-4" from the end of the countertop overhang. This does exceed the Marble Institutes requirements but it looks much better from a design perspective.

• How many corbels do I order?
• Corbels are generally spaced 24 to 36 inches apart under countertop overhangs.
• To figure out how many corbels you need lets start with 2 corbels at each end of the countertop set 4" to 6" inches in, from the edge.
• Now measure the span left between the 2 end corbels and use the following formula: (span left) divided by (desired spacing).

Example; an 84" wide countertop with 2 brackets set 4 inches from the end would leave you with 76 inches left to support; (84" - 8" = 76"). Now take 76" divided/by 24" = 3.1, so you would need 3 more corbels for a total of 5 brackets.
For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 24 inch span between corbels, you would order 5 brackets total. 2 ends brackets and 3 to support the remaining 76" span.
For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 36 inch span between corbels, you would order 4 brackets total. 2 ends brackets and 2 to support the remaining 76" span.

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

With its minimalist look, the 1.5-inch wide Parsons Corbel offers a straightforward way to support your kitchen countertop overhangs, shelving units and much more. Each 1.5 wide corbel is made using a solid 1/4" L-Bracket and thick tube steel center support. Available in standard unfinished and premium finishes of Black, Aged Bronze, Aged Pewter or Clear Coat (over raw metal). For an industrial look the bracket looks best with our clear over raw metal finish. If you want to take the industrial look a step further you can opt to have the brackets shipped with no finish at all and let them naturally patina over time.
Bracket sizes range from 5 x 7 to 10 x 12, accommodating a myriad of countertop and shelf depths. This bracket design is available in a wider more substantial looking 2-Inch wide bracket as well.

Specifications

• Dimensions: L-bracket is 1/4-inch thick by 1.5" wide with a 1" thick center support.
• Bracket Sizes: 5 x 7 | 6 x 8 | 7 x 9 | 8 x 10 | 9 x 11 | 10 x 12

Mounting Holes: 3 1/4" countersunk holes on the back mounting plate. 2 holes are included in the top part of this bracket, their use is optional if the application needs them. For example you may want to secure shelving or mantels to your bracket.

• Material: Iron
• Iron Finish Options: 4 Iron Finishes Available
• Pictured: Parsons Iron Corbel with Black Finish
• Additional Info.

Product Type: Corbel or Bracket

• Function: Support Granite/Natural stone counter top overhangs, shelves, mantels & more.
• Style:Transitional
• Country of Manufacture: USA
• Eco-Friendly: Yes
• Care: Wipe clean with dry cloth
• Assembly Required: Installation is required but the product is one solid piece
• Included: Brackets sold individually (mounting hardware is not included)
• What Size? How Many?
• This information is provided by The Marble Institute of Americas published requirements for granite countetops.
• What size corbel do I order?
• Your Countertop overhang should not extend past the corbel by more than 4 to 6 inches.
• Example: If your countetop overhang is 10-inches you will want a bracket that measures at least 5 to 6 inches deep.
• All our corbel measurements are listed as depth x height | Example: a 6" x 8" corbel is 6 inches deep and 8 inches high.

Notes From a Designer: Corbels are meant to be seen. So they generally look best when they are 2/3 as deep as the countertop overhang itself. As an example, when we design countetop overhangs we will keep the end of the corbel 2-4" from the end of the countertop overhang. This does exceed the Marble Institutes requirements but it looks much better from a design perspective.

• How many corbels do I order?
• Corbels are generally spaced 24 to 36 inches apart under countertop overhangs.
• To figure out how many corbels you need lets start with 2 corbels at each end of the countertop set 4" to 6" inches in, from the edge.
• Now measure the span left between the 2 end corbels and use the following formula: (span left) divided by (desired spacing).

Example; an 84" wide countertop with 2 brackets set 4 inches from the end would leave you with 76 inches left to support; (84" - 8" = 76"). Now take 76" divided/by 24" = 3.1, so you would need 3 more corbels for a total of 5 brackets.
For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 24 inch span between corbels, you would order 5 brackets total. 2 ends brackets and 3 to support the remaining 76" span.
For a countertop overhang spanning 84" wide with 2 corbels set in 4" from either side, and a 36 inch span between corbels, you would order 4 brackets total. 2 ends brackets and 2 to support the remaining 76" span.

Installation is a breeze with pre-drilled holes. Stainless steel meets the demand for urban, industrial, or refined farmhouse style and decor. Stainless steel provides lasting, sturdy support with stunning appeal and is also ideal for wet areas, as it is corrosive resistant. Instantly upgrade a room with impressive open shelving or modernized under-cabinet support. Create a striking contrast against dark wood or paint. Design with your personal style in mind and bring joy to your space with the largest collection of stainless-steel brackets available in the marketplace today.

• Perfect for countertop, cabinetry and shelf applications
• Pre-drilled mounting holes for easy installation
• State-of-the-art designs in a variety of sizes
• High-quality,1/4"heavy-duty metal offers durable, sturdy support
• Beautiful brushed stainless steel compliments most kitchens for a cohesive look
• Available in a variety of specialty hand-painted finishes

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Support brackets for countertops which do not have a knee wall or pony wall to mount to are the perfect solution for our Side Wall Countertop Support Bracket.

This bracket mounts to the inside of the left or right side cabinet wall. This bracket has a vertical tang which is welded either to the left or right side of the horizontal piece. The angle placement is determined from the front view (where the 45 degree angle is cut.)

The Side Wall Hidden Bracket is made of 0.50" thick by 2.5" wide American steel protected with a high quality anti-rust black paint.

Brackets are actually sized in length tip to tip; therefore, a 12" bracket is 12" from tip to tip. Vertical tang is not used in determining length

• Dimensions for the Side Wall Hidden Bracket:
• The horizontal part of the Side Wall Hidden Bracket dimensions is as follows:
• Lenght: this is the total length of the bracket from tip to tip including space for vertical tang.
• Width: 2.5"
• Thickness: 0.50"

-Listing is for one bracket; no hardware included

• Dimensions for the Vertical Tang Anchor part Placed on left or right side:
• Lenght: 6"
• Width: 2.5"
• Thickness: 0.25"

Hole Diameter: 0.25"

• How To Determine How May Brackets You Need:
• Brackets are actually sized in total length from front tip to back tip. Therefore a 12" bracket is 12" tip to tip with a 2-0.50" by 6" vertical tang welded on the left or right side. Please add in the 2-0.50" for the vertical in overall length.

Note: We recommend spacing your brackets 20" apart for maximum countertop protection, therefore, if your countertop is longer than the 20" recommended spacing you can use the Hidden Island Support Bracket, Knee Wall Bracket, or L Bracket in conjunction with this Side Wall Bracket to protect your countertop investment.

Bracket Features:

• Virtually invisible, gives your granite countertop the appearance of floating.
• Non-intrusive. No corbels needed. No knee knocking.
• Completely open space allowing room for chairs and legs.
• Economical way to protect your countertop investment.
• Easy to install
• Made of 0.50" thick by 2.5" wide rolled steel
• Bracket end has beveled edge for safety.
• Screw holes are placed on vertical piece
• Made in the USA

Wrought Iron Brackets provide an alternative to wood brackets and corbels. By using Wrought Iron, designers can create intricate patterns, not normally possible with wood. Our Wrought Iron Brackets are load-bearing and can be used to support several types of countertops including granite countertops. With over 10 styles available and multiple sizes, you'll be sure to find the perfect bracket for your application.

• Perfect for Countertop & Shelf Applications
• Pre-drilled Mounting Holes For Easy Installation
• Can Be Used to Support Granite Countertops
• Unique Iron Bracket Design
• Heavy Duty Iron Bracket Offers Great Support
• Authentic Iron Bracket Look & Feel