Countertop Support Brackets

Keaton Iron Corbel 2-Inch Wide

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

The Double-Sided Island Support Bracket is a hidden countertop support bracket designed to give support to any countertop which has an overhang on both sides of the cabinet. This bracket is primarily used for kitchen islands or breakfast bars. This is the perfect concealed countertop bracket for double overhang countertops. We recommend spacing your brackets every 16 to 20 inches apart.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Double-Sided Island Support Bracket.
There is no hardware needed for this bracket; it will rest inside of the pocket created to hold the bracket in place.

How to determine what size bracket:

This bracket will be installed over the top of your cabinets on the kitchen island or breakfast bar. Start by measuring the total length of your countertop. For example, you have a countertop of 28 inches. Subtract 3 inches from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4 inches. This gives us a total length of 22 inches (28 – 3 – 3 = 22), thus you would need to order 22 inch Double-Sided Island Support Brackets.

• Dimensions of the Double-Sided Island Support Bracket:
• Length – [Select your chosen length when ordering bracket]
• Width – 2 ½ inches
• Thickness – ½ inch

Charlotte Iron Corbel 2-Inch Wide

Freeman Iron Corbel 2-Inch Wide

Copy of Floating Countertop Wall Bracket

The Double-Sided Island Support Bracket is a hidden countertop support bracket designed to give support to any countertop which has an overhang on both sides of the cabinet. This bracket is primarily used for kitchen islands or breakfast bars. This is the perfect concealed countertop bracket for double overhang countertops. We recommend spacing your brackets every 16 to 20" apart.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Double-Sided Island Support Bracket.
There is no hardware needed for this bracket; it will rest inside of the pocket created to hold the bracket in place.

How to determine what size bracket:

• This bracket will be installed over the top of your cabinets on the kitchen island or breakfast bar. Start by measuring the total length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Double-Sided Island Support Brackets.
• Dimensions of the Double-Sided Island Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2) 3/4" #10 wood screws

This countertop support is used when there is no knee wall or when you have an oversized overhang requiring the best on the market. This is absolutely the perfect concealed support for countertop overhangs on a kitchen island or breakfast bar.
Give yourself or your customer the peace of mind they deserve by having the strongest kitchen island support bracket on the market with the Hidden Island Support Bracket.
This bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet.

How to determine what size bracket:

• The bracket will be mounted to the inside of the cabinet. Start by measuring your cabinet from the inside front wall, where the doors are, to the opposite side of the cabinet. For instance, 22". Next take your measurement (22") and add the" of the overhang of the countertop (I.E 15"). Then subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This measurement would be 34" (22 + 15 - 3 = 34), thus you would need to order a 34" Hidden Island Support Bracket.
• Dimensions of the Hidden Island Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5" (4 0.50" with the flange)
• Thickness - 0.50"

**Not for use in any other application than that listed.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

The Double-Sided Island Support Bracket is a hidden countertop support bracket designed to give support to any countertop which has an overhang on both sides of the cabinet. This bracket is primarily used for kitchen islands or breakfast bars. This is the perfect concealed countertop bracket for double overhang countertops. We recommend spacing your brackets every 16 to 20" apart.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Double-Sided Island Support Bracket.
There is no hardware needed for this bracket; it will rest inside of the pocket created to hold the bracket in place.

How to determine what size bracket:

• This bracket will be installed over the top of your cabinets on the kitchen island or breakfast bar. Start by measuring the total length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Double-Sided Island Support Brackets.
• Dimensions of the Double-Sided Island Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2) 3/4" #10 wood screws

This countertop support is used when there is no knee wall or when you have an oversized overhang requiring the best on the market. This is absolutely the perfect concealed support for countertop overhangs on a kitchen island or breakfast bar.
Give yourself or your customer the peace of mind they deserve by having the strongest kitchen island support bracket on the market with the Hidden Island Support Bracket.
This bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet.

How to determine what size bracket:

• The bracket will be mounted to the inside of the cabinet. Start by measuring your cabinet from the inside front wall, where the doors are, to the opposite side of the cabinet. For instance, 22". Next take your measurement (22") and add the" of the overhang of the countertop (I.E 15"). Then subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This measurement would be 34" (22 + 15 - 3 = 34), thus you would need to order a 34" Hidden Island Support Bracket.
• Dimensions of the Hidden Island Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5" (4 0.50" with the flange)
• Thickness - 0.50"

**Not for use in any other application than that listed.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws
For supporting a kitchen countertop where the countertop is balanced in the middle of the knee wall or pony wall, the Flat Wall Hidden Countertop Support Bracket is the hidden steel bracket support of choice. The perfect concealed bracket for countertop overhang.

Heavy duty countertop support brackets, with gussets, are ideal for direct stud applications, allowing for a strong overhang support in commercial or high-traffic areas. Non-intrusive brackets offer a sleek, modern finish to any project without comprising on the support of 1/2" thick authentic, sturdy steel. Manufactured with beveled edges, the black powder coated brackets eliminate an application with sharp edges.

Countertop island brackets are ideal for island or peninsula applications, allowing for a strong overhang support where no knee wall exists. Non-intrusive brackets offer a sleek, modern finish to any project without comprising on the support of 1/2" thick authentic, sturdy steel. Manufactured with beveled edges, the black powder coated brackets eliminate an application with sharp edges.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws
For supporting a kitchen countertop where the countertop is balanced in the middle of the knee wall or pony wall, the Flat Wall Hidden Countertop Support Bracket is the hidden steel bracket support of choice. The perfect concealed bracket for countertop overhang.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For supporting a kitchen countertop where the weight of the counter is balanced in the middle of the knee/pony wall, the Flat Wall Countertop Support Bracket is the hidden bracket support of choice. This bracket features countersunk holes to provide a flush installation for added support. This is the perfect concealed bracket for countertop overhang.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Flat Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

• This bracket will be installed directly in the middle of your knee/pony wall to provide support to both sides of an overhang. The Flatt Wall Countertop Support Bracket is sized in length tip to tip. Start by measuring the entire length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Flat Wall Countertop Support Brackets.
• If you are looking for holes placed on the end of the bracket, our Knee Wall Countertop Support Bracket may be what you are looking for.
• Dimensions of the Flat Wall Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For supporting a kitchen countertop where the weight of the counter is balanced in the middle of the knee/pony wall, the Flat Wall Countertop Support Bracket is the hidden bracket support of choice. This bracket features countersunk holes to provide a flush installation for added support. This is the perfect concealed bracket for countertop overhang.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Flat Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

• This bracket will be installed directly in the middle of your knee/pony wall to provide support to both sides of an overhang. The Flatt Wall Countertop Support Bracket is sized in length tip to tip. Start by measuring the entire length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Flat Wall Countertop Support Brackets.
• If you are looking for holes placed on the end of the bracket, our Knee Wall Countertop Support Bracket may be what you are looking for.
• Dimensions of the Flat Wall Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(8) 2" #12 wood screws

This aluminum countertop support is mounted over a knee/pony wall, then into each stud on the knee/pony wall, to secure the weight of the countertop. If there is no knee/pony wall, a 2x6 must be mounted inside the cabinet and the L bracket attached spacing every 16-20".
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Aluminum L Bracket Countertop Support.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2) 3/4" #10 wood screws

This countertop support is used when there is no knee wall or when you have an oversized overhang requiring the best on the market. This is absolutely the perfect concealed support for countertop overhangs on a kitchen island or breakfast bar.
Give yourself or your customer the peace of mind they deserve by having the strongest kitchen island support bracket on the market with theIndustrial Hidden Island Support Bracket.
This bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(2) 3/4" #10 wood screws

This countertop support is used when there is no knee wall or when you have an oversized overhang requiring the best on the market. This is absolutely the perfect concealed support for countertop overhangs on a kitchen island or breakfast bar.
Give yourself or your customer the peace of mind they deserve by having the strongest kitchen island support bracket on the market with the Hidden Island Support Bracket.
This bracket is designed to attach to the inside of the front wall of the cabinet and will extend through the cabinet.

How to determine what size bracket:

• The bracket will be mounted to the inside of the cabinet. Start by measuring your cabinet from the inside front wall, where the doors are, to the opposite side of the cabinet. For instance, 22". Next take your measurement (22") and add the" of the overhang of the countertop (I.E 15"). Then subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This measurement would be 34" (22 + 15 - 3 = 34), thus you would need to order a 34" Hidden Island Support Bracket.
• Dimensions of the Hidden Island Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5" (4 0.50" with the flange)
• Thickness - 0.50"

**Not for use in any other application than that listed.

Portland Iron Corbel 2-Inch Wide

Charlotte Iron Corbel 1.5-Inch Wide

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For supporting a kitchen countertop where the weight of the counter is balanced in the middle of the knee/pony wall, the Flat Wall Countertop Support Bracket is the hidden bracket support of choice. This bracket features countersunk holes to provide a flush installation for added support. This is the perfect concealed bracket for countertop overhang.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Flat Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

• This bracket will be installed directly in the middle of your knee/pony wall to provide support to both sides of an overhang. The Flatt Wall Countertop Support Bracket is sized in length tip to tip. Start by measuring the entire length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Flat Wall Countertop Support Brackets.
• If you are looking for holes placed on the end of the bracket, our Knee Wall Countertop Support Bracket may be what you are looking for.
• Dimensions of the Flat Wall Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For supporting a kitchen countertop where the weight of the counter is balanced in the middle of the knee/pony wall, the Flat Wall Countertop Support Bracket is the hidden bracket support of choice. This bracket features countersunk holes to provide a flush installation for added support. This is the perfect concealed bracket for countertop overhang.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Flat Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

• This bracket will be installed directly in the middle of your knee/pony wall to provide support to both sides of an overhang. The Flatt Wall Countertop Support Bracket is sized in length tip to tip. Start by measuring the entire length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Flat Wall Countertop Support Brackets.
• If you are looking for holes placed on the end of the bracket, our Knee Wall Countertop Support Bracket may be what you are looking for.
• Dimensions of the Flat Wall Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Hole Diameter -.25"

Countertop island brackets are ideal for island or peninsula applications, allowing for a strong overhang support where no knee wall exists. Non-intrusive brackets offer a sleek, modern finish to any project without comprising on the support of 1/2" thick authentic, sturdy steel. Manufactured with beveled edges, the black powder coated brackets eliminate an application with sharp edges.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For supporting a kitchen countertop where the weight of the counter is balanced in the middle of the knee/pony wall, the Flat Wall Countertop Support Bracket is the hidden bracket support of choice. This bracket features countersunk holes to provide a flush installation for added support. This is the perfect concealed bracket for countertop overhang.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Flat Wall Countertop Support Bracket.
This bracket is designed to attach to the top of knee/pony walls to support extended countertop overhangs.

How to determine what size bracket:

• This bracket will be installed directly in the middle of your knee/pony wall to provide support to both sides of an overhang. The Flatt Wall Countertop Support Bracket is sized in length tip to tip. Start by measuring the entire length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Flat Wall Countertop Support Brackets.
• If you are looking for holes placed on the end of the bracket, our Knee Wall Countertop Support Bracket may be what you are looking for.
• Dimensions of the Flat Wall Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Hole Diameter -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws
For supporting a kitchen countertop where the countertop is balanced in the middle of the knee wall or pony wall, the Flat Wall Hidden Countertop Support Bracket is the hidden steel bracket support of choice. The perfect concealed bracket for countertop overhang.

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For support a countertop which do not have a knee/pony wall available, the Side Wall Hidden Countertop Support Bracket is the perfect solution. This bracket has a vertical tang which is welded either to the left or right side of the horizontal. The angle placement is determined from the front view of the bracket, where the 45-degree angle is cut at the end of the horizontal.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Side Wall Hidden Countertop Support Bracket.

This bracket is designed to attach to the inside of the left or right-side cabinet wall.

How to determine what size bracket:

This bracket will be installed on the left or right-side wall on the inside of your cabinets. Start by measuring the length of the overhang for your countertop. For example, the overhang of the countertop is 15". Subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 12" (15 - 3 = 12), thus you would need to order a 12 " Side Wall Hidden Countertop Support Bracket with your chosen angle(s).

• Dimensions of the Side Wall Hidden Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Vertical Length - 6"
• Vertical Width - 2.50"
• Vertical Thickness -.25"
• Hole Diameter -.25"

The Double-Sided Island Support Bracket is a hidden countertop support bracket designed to give support to any countertop which has an overhang on both sides of the cabinet. This bracket is primarily used for kitchen islands or breakfast bars. This is the perfect concealed countertop bracket for double overhang countertops. We recommend spacing your brackets every 16 to 20" apart.
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Double-Sided Island Support Bracket.
There is no hardware needed for this bracket; it will rest inside of the pocket created to hold the bracket in place.

How to determine what size bracket:

• This bracket will be installed over the top of your cabinets on the kitchen island or breakfast bar. Start by measuring the total length of your countertop. For example, you have a countertop of 28". Subtract 3" from each side of the countertop. This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 22" (28 - 3 - 3 = 22), thus you would need to order 22" Double-Sided Island Support Brackets.
• Dimensions of the Double-Sided Island Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 2" #12 wood screws

For support a countertop which do not have a knee/pony wall available, the Side Wall Hidden Countertop Support Bracket is the perfect solution. This bracket has a vertical tang which is welded either to the left or right side of the horizontal. The angle placement is determined from the front view of the bracket, where the 45-degree angle is cut at the end of the horizontal.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Side Wall Hidden Countertop Support Bracket.

This bracket is designed to attach to the inside of the left or right-side cabinet wall.

How to determine what size bracket:

This bracket will be installed on the left or right-side wall on the inside of your cabinets. Start by measuring the length of the overhang for your countertop. For example, the overhang of the countertop is 15". Subtract 3". This subtraction is to stay away from the outer edge of the countertop, which is usually 2-4". This gives us a total length of 12" (15 - 3 = 12), thus you would need to order a 12 " Side Wall Hidden Countertop Support Bracket with your chosen angle(s).

• Dimensions of the Side Wall Hidden Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.50"
• Thickness -.50"
• Vertical Length - 6"
• Vertical Width - 2.50"
• Vertical Thickness -.25"
• Hole Diameter -.25"

Keaton Iron Corbel 2-Inch Wide

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(4) 3/4" #10 wood screws

For countertop support, the T Brace Countertop Support Bracket is a bracket that will leverage the weight of your big granite countertop in order to provide support. The vertical angle drops down on the inside back of the cabinets and is used to hold the bracket in place until the granite is installed. This is the perfect concealed countertop overhang bracket. This bracket will give your granite the appearance of floating once installed.

Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the T Brace Countertop Support Bracket.

This bracket lies across the top of the cabinet, half of the bracket will be inside of the cabinet and the other half will be exposed under the overhang.

*Please note**

The vertical piece (the tang) is welded in the center of the horizontal piece. Therefore, if you have a 10" bracket, the tang is directly in the center of the bracket, giving you approximately 5" inside the cabinet and 5" underneath your overhang.

• Dimensions of the T Brace Countertop Support Bracket:
• Length - Select your chosen length when ordering bracket
• Width - 2.5"
• Thickness -.50"
• Hole Diameter -.25"
• Vertical Length - 4.50"
• Vertical Width - 2.50"
• Vertical Thickness -.25"

*Note due to supply chain challenges this product does not contain screws: Recommended hardware is QTY(8) 2" #12 wood screws

This aluminum countertop support is mounted over a knee/pony wall, then into each stud on the knee/pony wall, to secure the weight of the countertop. If there is no knee/pony wall, a 2x6 must be mounted inside the cabinet and the L bracket attached spacing every 16-20".
Give yourself or your customer the peace of mind they deserve by having the strongest countertop support bracket on the market with the Aluminum L Bracket Countertop Support.