Interior/Exterior Wall Coverings

• Size: 1 quart
• Color: Semi-Gloss

• Protects and beautifies interior and exterior wood surfaces
• Remains flexible and absorbs the expanding and contracting seasonal movement of the wood
• Maximum U.V. protection
• Superior durability
• Water resistant
• Resists cracking and peeling
• Resists ocean salt spray
• Ideal for expensive mahogany, etc.
• For use on exterior wood entry doors, wood shutters, outdoor furniture, interior windowsills and frames, planters, wood trim on boats (above water line) and more.

• Size: 16 Oz
• Stainable & Paintable
• For interior & exterior use
• Fast drying/sands easily
• Securely holds screws & nails
• Resists shrinking & cracking
• Latex formula/soap & water clean-up.

Specifications

• Application Tool: Putty knife
• Dry Time: 2-6 hours, depending on size of area filled
• Cleanup: Soap and water
• Recommended Uses: For filling cracks, small gouges, nail holes, knot holes and other defects in unfinished wood
• Stain Application: As soon as wood filler has dried and is sanded.
• Directions
• Preparation
• Surface must be clean, dry, and free of dirt, grease, oil and loose particles. For rotted wood use Minwax Wood Hardener to strengthen wood fibers before applying Minwax Stainable Wood Filler.This product should not be used on holes larger than 3/4". For larger holes use, Minwax High Performance Wood Filler.
• Application
• Squeeze a liberal amount of Minwax Stainable Wood Filler into the area to be filled and press firmly into place, using a putty knife. Fill slightly above surface to allow for sanding while minimizing overspreading on surrounding areas. Remove excess
• Allow the filler to dry completely. Dry time will vary depending on depth of area to be filled. Most common shallow repairs will dry within 2 hours. For deeper holes, fill in layers 1/4" at a time, which may require 2-6 hours to dry
• Sand filler smooth and flush to the wood. Remove all sanding residue before staining, topcoating or painting.
• Staining & Finishing
• Before filling, test stain on scrap wood with filler. Choose a Minwax penetrating stain, such as, Minwax Wood Finish, Minwax Water-Based Stain or Minwax Gel Stain and apply according to the label directions. After staining for interior use, apply a protective clear finish such as Minwax Fast Drying Polyurethane or Minwax Polycrylic Protective Finish for long lasting beauty and protection. For exterior use, apply a protective finish such as Minwax Helmsman Spar Urethane. Minwax Stainable Wood Filler can also be directly topcoated with a clear finish or painted.
• Note: Not recommended for use with Minwax PolyShades one-step stain and finish. Not recommended for use on floors. Store at room temperature. Keep from freezing. Do not apply when temperature is less than 40°F.
• FAQ's
• What kind of stain does Minwax Stainable Wood Filler accept?
• Minwax Stainable Wood Filler has been formulated to accept all Minwax penetrating stains, including Minwax® Wood Finish, Minwax Gel Stain and Minwax Water Based Wood Stain.
• Can Minwax Stainable Wood Filler be top-coated?
• Yes. Minwax Stainable Wood Filler has been designed to work within the Minwax system. It can be top-coated with any Minwax protective clear finish, including Minwax Fast-Drying Polyurethane, Minwax> Polycrylic Protective Finish. It also can be painted.
• Can Stainable Wood Filler be used with a one-step stain and finish, such as Minwax PolyShades?
• No, it is not recommended for use with Minwax PolyShades.
• Can Minwax Stainable Wood Filler be used outside?
• Absolutely. Minwax Stainable Wood Filler can be used on exterior wood surfaces.
• Can Minwax Stainable Wood Filler be used on previously stained wood?
• While not ideal, it can be done. It may be difficult to match the color to the surrounding area.

Highlights:

• Size: 1 Gallon
• Interior/Exterior
• Fast drying
• Low odor
• Low VOC formula
• Excellent adhesion
• Easy to clean with soap & water
• Water based primer sealer & stain blocker
• Specially designed for residential surfaces in high humidity
• Moisture & temperature environments like kitchens & bathrooms
• EPA registered active ingredient creates mold & mildew-resistant film

• QT,
• Peel Stop Clear Binding Primer
• Glues Down Old Paint Edges
• Seals Cracking & Checking, Binds Chalky Surfaces
• Soap & Water Clean Up
• Interior Or Exterior Use.

PRODUCT FEATURES:

• Interior & exterior water-base
• Extend the life of problem surfaces
• Binds cracking, chalking and peeling paint
• Glues down cracks and gaps under edges of old paint.

• Gallon
• Bulls-Eye 1-2-3
• Primer Sealer/Stain Killer
• Blocks most stains
• Indoor/outdoor
• Seals porous surfaces
• Prevents moisture caused paint peeling.

• 1 quart
• B.I.N advanced
• Synthetic shellac
• High hiding bright white primer sealer
• Water based
• Fast dry
• Ultimate stain blocking for water stains, rust stains, graffiti, crayon, grease
• Superior odor blocking for smoke, cigar, cigarette, pets, food, low odor
• Nationally VOC compliant.

• "ZINSSER" WALLCOVERING PRIMER Protects wallboard when removing wallpaper , water based formula Features :-
• Primes, hides, seals & sizes in 1 step
• Excellent adhesion to all paintable surfaces
• Hiding power covers colors & patterns
• Seals "builders flat" latex paint
• Protects wallboard when removing wallpaper
• Low odor
• Water-based formula
• Covers 400-500 sqft.

• Size: Quart
• Color: White
• Eliminates recurring cracks
• Odorless
• Paintable
• Water resistant
• Provides a permanently flexible fill
• Will not flash paint
• Ready to use
• Apply in temperatures above 40 degree F
• Interior and exterior use

Clean Up & Storage:

• Quart
• Interior/Exterior
• Bulls-Eye 1-2-3 water base
• Primer Sealer/Stain Killer
• Binds moderately chalky surfaces
• Dried film is mold and mildew resistant
• Dries in minutes, can be recoated in 1 hour
• Bonds to glossy surfaces without scuff sanding
• Approved for use in food processing establishments
• Mold mildow resistant film.

• 1 Qt
• Bonds porous wood & wood type materials
• Passes ANSI/HPVA type I water-resistance
• Waterproof formula that cleans up with water
• Superior strength - strong initial tack
• Designed for interior and exterior applications
• Longer open assembly time
• Sandable
• Non-toxic
• Solvent free
• Water clean up
• Lower application temperature
• Unaffected by finishes
• FDA approved for indirect food contact.

Application Guidelines:

• Application Temperature: Above 47°F.
• Open Assembly Time: 8-10 minutes (70°F./50% RH)
• Total assembly time: 20-25minutes (70°F./50% RH)
• Minimum required spread: Approximately 6 mils or 250 square feet per gallon
• Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 PSI for softwoods, 125-175 PSIi for medium woods and 175-250 PSI for hardwoods)
• Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Additional Info:

• 5 gallon
• Fast dry water based white pigmented primer sealer/stain killer
• Very low odor, may be used on interior or exterior surfaces
• Holds back most stains
• Can be re-coated quickly & allows for easy clean up with warm soapy water

Surface Preparation:

• The surface must be clean, free of dust, grease, wax, peeling paint and wallpaper paste. If washing is necessary use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
• For maximum adhesion, scrape off loose paint and scuff sand the surface thoroughly before priming. On glossy surfaces: scuff sand the surface thoroughly before priming.
• Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming.
• Wash the area with a mildew remover, rinse with water and allow to dry before priming.
• KILZ 2 may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ 2.
• It is critical to clean smoke damaged surfaces thoroughly before priming. Primary Recommendation: KILZ ORIGINAL or KILZ ODORLESS.

Application:

• Eye protection is recommended.
• A small amount of water may be added for spray applications, but do not thin for stainblocking applications.
• Stir thoroughly before and occasionally during use.
• Apply using a brush, roller or sprayer.
• Only apply if surface, air and product temperatures are between 50°-90°F.
• Prime the entire surface to ensure a uniform appearance of the topcoat.
• After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
• Tinting is not recommended for stainblocking applications. KILZ 2 may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects. Tinting to a lighter shade than the topcoat is recommended.
• Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces.

Dry Time at 77°F (25°C), 50% RH:

• Dries to the touch in 30 minutes.
• Can be recoated or topcoated in one hour with latex or oil-based paint.
• Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time.

Clean up & Disposal:

• Clean equipment and paint spatters with warm, soapy water.
• Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.

• Color: White
• Finish: Matte
• Size: 12 ounce
• Premium coverage and superior color with excellent adhesion and durability
• Indoor/outdoor use with rust protection
• Big button spray tip with spray any way capabilities
• Dries in 10 minutes or less.

Dry to touch:

• 10 minutes or less

Dry to handle:

• 1 hour

For use on:

• Wood, Metal, Wicker, Plastic, Paper Mache, Glass, Plaster/Ceramic, Fabric, Paper.

Recoat Window:

Coverage:

Application Conditions:

Clean up:

• Mineral spirits.

Highlights:

• Size : 32 Ounce
• Color : Eclipse
• Base Type : Water-Based
• Coating Material : Acrylic
• Indoor or Outdoor : Indoor
• Recommended Surface : Wood
• Coverage Area : Up to 150 Square Feet.
• Time Before Recoating : 1 hour
• Easy application
• Dries Smooth
• Clean Up : Soap and Water
• Full Cure Time : 24 hour
• VOC Level : 110 g/L
• Lightly textured matte finish can be layered with different techniques for a custom look
• Water-based, low VOC, low odor formula cleans easily with soap and water
• Durable paint that features excellent adhesion in a one-step buildable coating, making it easy to finish new, vintage or antique items

• Color: Citrus Green
• Finish: Gloss
• Size: 12 ounce
• Premium coverage and superior color with excellent adhesion and durability
• Indoor/outdoor use with rust protection
• Big button spray tip with spray any way capabilities
• Dries in 10 minutes or less.

Dry to touch:

• 10 minutes or less

Dry to handle:

• 1 hour

For use on:

• Wood, Metal, Wicker, Plastic, Paper Mache, Glass, Plaster/Ceramic, Fabric, Paper.

Recoat Window:

Coverage:

Application Conditions:

Clean up:

• Mineral spirits.

• 1/2 Pt
• Kona Brown
• Fast dry
• Excellent color retention
• Smooth finish.

• 1/2 Pt
• Semi-Gloss White
• Gloss
• Fast dry
• Excellent color retention
• Smooth finish.

• Size: 10.5 ounce
• Color: Dark brown
• Application range: 40 degree F to 120 degree F
• Caulk and seal your windows, doors and siding
• High performance elastic sealant
• Water resistance, stretches & compresses with temperature change
• Won't crack...It Just stretches
• Perfect for many interior and exterior applications
• Spans gaps up to 2"
• Water clean up.

Clean up and storage:

• 1 Qt
• Color: Almond
• Indoor/outdoor durability
• Fast dry
• Excellent color retention
• Smooth finish.

For Best Results:

• LB Skid-Tex Paint Additive
• Non-Skid Compound Specially Formulated For Easy Mixing & Application In All Types Of Floor Paints
• Use LB Skid-Tex With Gallon Paint
• Covers 100 - 125 SQFT.

• A ready-to-use patching and leveling compound for smoothing and repairing concrete, wood, and masonry prior to flooring installation.
• #345
• Smooth and repairs concrete, wood and masonry
• Ready to use – no mixing required
• Fast setting – dries in 2-3 hours
• Convenient size: 1 gal container

Applications:

• HENRY 345 Premixed Patch n’ Level Floor Patch & Smoothing Compound is designed for smoothing and repairing interior and exterior concrete and masonry surfaces and for interior wood floors, prior to the installation of flooring. It can also be used to patch non-moving joints in concrete. (Use a flexible sealant for moving concrete joints)

Bonds To:

• HENRY 345 Premixed Patch n’ Level Floor Patch & Smoothing Compound bonds to interior and exterior concrete and masonry as well as interior wood surfaces. Over concrete and masonry, HENRY 345 Patch n’ Level must be covered with a floor covering or by a high-quality floor paint or sealer. Over wood, it must be covered with a floor covering. This product is intended for foot or residential rubber-wheeled traffic and similar uses.

• 1/2 Pt
• Black
• Gloss
• Fast dry
• Excellent color retention
• Smooth finish.

• 1/2 Pt
• Flat White
• Gloss
• Fast dry
• Excellent color retention
• Smooth finish.

• Size: 5 Gallon
• Color: Gray

• Ready mixed – Low-odor formula
• Breathable film – does not trap moisture in masonry
• Withstands 10 pounds of hydrostatic pressure, greater than a wall of water 22 feet high
• Clean up with soap and water
• Applies easily with brush and/or roller
• Complies with all current VOC and/or VOS.

• 30 Minutes
• Recoat 3 Hours

• Soap and water
• Coverage (sqft./Us gal.): 75-100 sq. ft./gal.

• 1 Qt
• Color: Navy Blue
• Fast dry
• Excellent color retention
• Smooth finish
• Indoor/outdoor durability.

For Best Results:

• 1 Qt
• Color: Gloss White
• Indoor/outdoor durability
• Fast dry
• Excellent color retention
• Smooth finish.

For Best Results:

• 1 Qt
• Deep Blue
• Fast dry
• Excellent color retention
• Smooth finish
• For even longer, lasting protection, use a painter’s touch® primer first.

• 1 Qt
• Color: Hunter Green
• Fast dry
• Excellent gloss color retention
• Indoor/outdoor durability
• Smooth finish.

For Best Results:

• 1/2 Pt
• Colonial Red
• Fast dry
• Excellent color retention
• Smooth finish.

• Color: White
• Smooth and ready mixed
• Excellent weather resistance
• For face glazing wood, metal and aluminum sash
• Forms an airtight, watertight seal
• Resists sagging, cracking and shrinking
• Interior/exterior use
• Made in the USA.

Suggested Uses:

For face glazing:

• Wood window frames
• Metal window frames.

Clean Up:

• 1/2 Pt
• Color: Hunter Green
• Fast dry
• Excellent color retention
• Smooth finish
• Indoor/outdoor durability.

For Best Results:

• 1/2 Pt
• White
• Gloss
• Fast dry
• Excellent color retention
• Smooth finish.

Highlights:

• Size: 12 Oz
• Color: St. Tropez
• Gloss Sheen: Ultra Matte
• Primer Required: No
• Dry Time: 20 min
• Indoor and Outdoor: Indoor and Outdoor
• Skid Resistant: No
• Coverage Area: 12 sq. ft.
• Inverted Spray Ability: Yes
• Tintable: No
• Cleanup: Mineral Spirits

Highlights:

• Size: 12 Oz
• Color: Black
• Gloss Sheen: High Gloss
• Skid Resistant: No
• Primer Required: No
• Coverage Area: 12 sq. ft.
• Tintable: No
• Dry Time: 20 min
• Indoor and Outdoor: Indoor and Outdoor
• Finish: Gloss
• Inverted Spray Ability: Yes
• Cleanup: Xylene/Mineral Spirits

• 1/2 Quart
• Spackling & Patching Compound
• Ready To Use
• Indoors Or Out
• Fill & Smooth Plaster Cracks & Breaks
• Nail Holes, Cuts
• Recessions & More
• Sag & Crack Fre
• Less Shrink Than Vinyl Spackling Paste
• Metal Can.

• 1/2 Pt
• Color: Sun Yellow
• Fast dry
• Excellent color retention
• Smooth finish
• Indoor/outdoor durability.

For Best Results: