Baldwin Hardware and Rok Hardware Hardware

• Add a gentle, soft closing close to your drawers
• For Face Frame & Frameless Cabinets
• Installs easily without measuring (no jig needed)
• Requires 1/2" side clearance
• Installation screws included: 1x ROKS7X1FPCNP #7x1" nickel flat head screw & 3x ROKS6X12PPSZ #6x1/2" zinc pan head screws.
• Minimum drawer box height must be equal or greater than 2-3/16" + drawer slide height

Note:

• Will work ONLY for wood or melamine drawers with side-mounted epoxy slides.
• Most drawers only require one adapter. We recommend 2 adapters for heavier drawers or drawers that are 24" and wider.
• Adding soft close to any drawer will give the drawer some resistance when opening. This is due to the nature of the soft close mechanism.
• DOES NOT work for undermount glides (hidden/concealed)

Also available in:

• Dimensions: 1" x 1-3/4"
• Center to Center: 1-1/4"
• Length: 1-23/32"
• Height: 31/32"
• Depth: 1"
• Material: Metal (20 gauge)
• Zinc plated
• Screws are not included.

• Width: 1-25/32"
• Depth: 15/16"
• Center to Center: 1-1/4" (32mm)
• Height: 7/8"
• Color/Finish: White
• Material: Metal
• Holding Power: 15.4 lb

• Includes strikes and screws
• 1/2" Front to back adjustment

• 5mm Nickel Shelf Pins / pegs are used to support a shelf in place on any entertainment center, bookcase, or project with 5mm shelf holes.
• Shelf Pins install easily by hand!
• "Spoon" shelf pin design eliminates any gap, shelf lays completely flush to the side of the cabinet.
• Diameter: 3/16"
• Shank length: 5/16"
• Finish: nickel

• Length: 1-1/4"
• Width: 3/4
• Offset: 3/8"
• 12 Gauge (flat-stamped)

• Finish: Black
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• 12 Possible Positions. Includes upper and lower mounting plates.
• 220 pounds static load rating.
• Made of steel with zinc finish.

Cabinet door use:

• 1 - Align the template and mark door front for knob or pull according to center to center distance and placement desired.
• 2 - Drill the holes that you marked.
• 3 - Install the knob or pull. Repeat the process for the other doors.

Drawers use:

• 1 - Measure and mark the midpoint of the drawer.
• 2 - Align the center point of the template with the midpoint and mark for knob or pull at desired height.
• 3 - Drill the holes you marked.
• 4 - Install the knob or pull. Repeat the process for other drawers.

Kit includes:

• , 1, Knob Drilling Template
• , 1, Pull Drilling Template
• , 1, 3/16" Drill bit

• Finish: White
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Plate: 57.1 mm (2.247") long, 35 mm (1.379") wide, 0.03 gauge.
• Ball catch: 54.5 mm (2.142") long, 23.2 mm (0.92") wide, 21 mm (0.825") ball holder.

• Length: 2-9/64" (54.5 mm).
• Width: 29/32" (23.2 mm).

• Finish: Black
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Used for attaching sinks to countertops
• 1/4"-20

• Finish: White
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Dampens the harsh sounds of slamming cabinet doors and drawers by up to 30%
• Incredible dampening quality
• Made in the USA
• 1/2" Diameter (12.7mm)
• 1/5" Height (5.1mm)
• For doors, drawers, cutting boards, coasters, electronics and more.

• Solid forged brass construction.
• Double cylinder function
• Polished Chrome finish (260)
• Features 1" solid brass throw bolt latch with hardened steel roll pin for additional strength and security.
• Features low profile cylinder projection.
• 2-1/8" cross bore and 1" edge bore for latch.
• Accommodates door thickness 1-3/8" to 2". Up to 2-1/2" thick door door with service part kit.
• Keyed entry featuring the traditional Baldwin pin and tumbler C-keyway, 6 way latch and Dual Strike Kit
• Adjustable backset latch fits 2-3/8" (60mm) or 2-3/4" (70mm) pre-bored doors.
• Reversible for all functions except half dummy.
• Functions available: entry, privacy, passage, full dummy, and half dummy.
• Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty

• Add a gentle, soft closing glide to your drawers
• Installs easily without measuring
• Requires 1/2" side clearance and a 9" drawer depth

• Note: Most drawers only require one adapter
• We recommend 2 adapters for heavier drawers or drawers that are 24" and wider

• No more slamming drawers with these soft close drawer slides. Soft-close device dampens and absorbs force, causing it to close slowly and quietly.
• Extremely light.
• 2" soft close stroke.
• Full Extension
• Height: 1-13/16" (45.7mm)
• Zinc Finish
• Requires a 1/2" side spacing per side (Overall 1")
• Pull force of 5.5 to 6.5 lbs
• Includes mounting screws

• Width: 1-15/32" (37 mm)
• Depth: 1-5/32" (29 mm)
• Center to Center: 31/32" (25 mm)
• Material: Steel
• Installation Screws Included

• No more slamming drawers with these soft close drawer slides. Soft-close device dampens and absorbs force, causing it to close slowly and quietly.
• Extremely light.
• 2" soft close stroke.
• Full Extension
• Height: 1-13/16" (45.7mm)
• Zinc Finish
• Requires a 1/2" side spacing per side (Overall 1")
• Pull force of 5.5 to 6.5 lbs
• Includes mounting screws
• Sold per pair

• Brand: Rok
• SKU: ROKSP3N
• 3mm Flat Spoon Shelf Support
• Material: Metal

• Del Mar Handleset, with Traditional Knob and Traditional Round Rose
• Solid forged brass construction.
• Features 1" solid brass throw bolt latch with hardened steel roll pin for additional strength and security.
• Features low profile cylinder projection.
• 2-1/8" cross bore and 1" edge bore for latch.
• Accommodates door thickness 1-3/8" to 2". Up to 2-1/2" thick door door with service part kit.
• Keyed entry featuring the traditional Baldwin pin and tumbler C-keyway, 6 way latch and Dual Strike Kit
• Adjustable backset latch fits 2-3/8" (60mm) or 2-3/4" (70mm) pre-bored doors.
• Limited Lifetime Mechanical Warranty and Limited 25 Year Finish Warranty

8252 Product Details

• Finish: Venetian Bronze (112)
• Back-lit keypad for increased visibility
• One-touch locking with a motorized deadbolt
• 2 customizable access codes
• Easy Install in Minutes w/ Screwdriver
• Fits Standard Tubular Door Prep
• No Hard Wiring Required
• Two Customizable User Codes with Easy Add & Delete Four to Eight Digit Codes
• One Touch Locking

Incorrect Code Lockout Feature

• Automatic Door Locking after 30 Seconds
• Door Locked / Unlocked led indicator
• Audible beep for activation
• Requires 4 AA Batteries
• Low Battery LED Indicator
• Tapered Deadbolt Design - Compensates for Door Misalignment Conditions
• Protective Coated Keypad Preventing Wear & Discoloration

Automatic Handing Feature

• Solid Forged Brass Trim
• Lifetime Limited Warranty

8252 Specifications

• Door Prep: 2 1/8" Bore, 1" Edge Bore
• Backset: Adjustable 2 3/8" or 2 3/4"
• Door Thickness: 1-3/4" to 2"
• Cylinder: 5-Pin C-Keyway
• Faceplate: 1" Square Corner
• Interior Dimensions: 7.93" H x 3.43" W x 2.55" Projection
• Strike: Square Corner Strike with reinforcing plate
• Latch: features 1" Throw
• Bolt: Constructed of Brass - tapered with security pin
• Handing: Reversable - Compatible with Right Handed or Left Handed Doors

• Finish: White
• Magnetic Pull Force: 6.5Lbs
• Length: 1-13/16"
• Width: 1-1/8"
• Height: 1-1/16"
• Screws: includes 4x phillips 5/8" pan head screws, and 1x phillips 1/2" flat head screw per magnetic catch.
• Strike plate and mounting screws included.

• Add a gentle, soft closing close to your drawers
• For Face Frame & Frameless Cabinets
• Installs easily without measuring (no jig needed)
• Requires 1/2" side clearance

• Note: Will work only for wood or melamine drawers with side-mounted epoxy slides.
• Most drawers only require one adapter. We recommend 2 adapters for heavier drawers or drawers that are 24" and wider.

• No more slamming drawers with these soft close drawer slides. Soft-close device dampens and absorbs force, causing it to close slowly and quietly.
• Extremely light.
• 2"" soft close stroke.
• Slide Travel Distance: 12-1/2" (Full Extension)
• Height: 1-13/16"" (45.7mm)
• Zinc Finish
• Requires a 1/2"" side spacing per side (Overall 1"")
• Pull force of 5.5 to 6.5 lbs
• Includes mounting screws

• Width: 1-25/32"
• Depth: 15/16"
• Center to Center: 1-1/4" (32mm)
• Height: 7/8"
• Color/Finish: White
• Material: Metal
• Holding Power: 15.4 lb

• Includes strikes and screws
• 1/2" Front to back adjustment